From: Alexandru Ardelean <aardelean@baylibre.com>
To: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Cc: jic23@kernel.org, krzk+dt@kernel.org, robh@kernel.org,
lars@metafoo.de, michael.hennerich@analog.com,
gstols@baylibre.com, Alexandru Ardelean <aardelean@baylibre.com>
Subject: [PATCH 6/7] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
Date: Mon, 19 Aug 2024 09:47:16 +0300 [thread overview]
Message-ID: <20240819064721.91494-7-aardelean@baylibre.com> (raw)
In-Reply-To: <20240819064721.91494-1-aardelean@baylibre.com>
The driver will support the AD7606C-16 and AD7606C-18.
This change adds the compatible strings for these devices.
The AD7606C-16,18 channels also support these (individually configurable)
types of channels:
- bipolar single-ended
- unipolar single-ended
- bipolar differential
This DT adds support for 'channel@X' nodes'
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
---
.../bindings/iio/adc/adi,ad7606.yaml | 83 +++++++++++++++++++
1 file changed, 83 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 69408cae3db9..f9e177de3f8c 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -14,6 +14,8 @@ description: |
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7605-4.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-16.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-18.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf
properties:
@@ -24,6 +26,8 @@ properties:
- adi,ad7606-6
- adi,ad7606-8 # Referred to as AD7606 (without -8) in the datasheet
- adi,ad7606b
+ - adi,ad7606c-16
+ - adi,ad7606c-18
- adi,ad7616
reg:
@@ -114,6 +118,30 @@ properties:
assumed that the pins are hardwired to VDD.
type: boolean
+patternProperties:
+ "^channel@([0-9a-f])$":
+ type: object
+ $ref: adc.yaml
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ description: The channel number.
+ minimum: 0
+ maximum: 7
+
+ diff-channel:
+ description: Channel is bipolar differential.
+ type: boolean
+
+ bipolar:
+ description: |
+ Channel is bipolar single-ended. If 'diff-channel' is set, then
+ the value of this property will be ignored.
+ type: boolean
+ required:
+ - reg
+
required:
- compatible
- reg
@@ -170,6 +198,21 @@ allOf:
adi,conversion-start-gpios:
maxItems: 1
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad7606c-16
+ - adi,ad7606c-18
+ then:
+ patternProperties:
+ "^channel@([0-9a-f])$":
+ properties:
+ diff-channels: false
+ bipolar: true
+
unevaluatedProperties: false
examples:
@@ -202,4 +245,44 @@ examples:
standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
};
};
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad7606-8";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ spi-cpha;
+
+ avcc-supply = <&adc_vref>;
+ vdrive-supply = <&vdd_supply>;
+
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+
+ adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+
+ adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+ adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+
+ adi,sw-mode;
+
+ channel@1 {
+ reg = <1>;
+ diff-channel;
+ };
+
+ channel@3 {
+ reg = <3>;
+ bipolar;
+ };
+ };
+ };
...
--
2.46.0
next prev parent reply other threads:[~2024-08-19 6:47 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-19 6:47 [PATCH 0/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts Alexandru Ardelean
2024-08-19 6:47 ` [PATCH 1/7] iio: adc: ad7606: add 'bits' parameter to channels macros Alexandru Ardelean
2024-08-23 18:52 ` Jonathan Cameron
2024-08-27 13:53 ` Alexandru Ardelean
2024-08-19 6:47 ` [PATCH 2/7] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct() Alexandru Ardelean
2024-08-19 6:47 ` [PATCH 3/7] iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from probe Alexandru Ardelean
2024-08-19 6:47 ` [PATCH 4/7] iio: adc: ad7606: wrap channel ranges & scales into struct Alexandru Ardelean
2024-08-19 6:47 ` [PATCH 5/7] iio: adc: ad7606: rework available attributes for SW channels Alexandru Ardelean
2024-08-19 6:47 ` Alexandru Ardelean [this message]
2024-08-19 13:09 ` [PATCH 6/7] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings Krzysztof Kozlowski
2024-08-20 4:51 ` Alexandru Ardelean
2024-08-21 20:26 ` Jonathan Cameron
2024-08-23 9:09 ` Krzysztof Kozlowski
2024-08-28 10:23 ` Alexandru Ardelean
2024-08-19 6:47 ` [PATCH 7/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts Alexandru Ardelean
2024-08-19 15:07 ` kernel test robot
2024-08-19 15:33 ` David Lechner
2024-08-23 15:54 ` Alexandru Ardelean
2024-08-23 18:04 ` David Lechner
2024-08-23 19:19 ` Jonathan Cameron
2024-08-27 13:53 ` Alexandru Ardelean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240819064721.91494-7-aardelean@baylibre.com \
--to=aardelean@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=gstols@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.hennerich@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox