From: Chris Morgan <macroalpha82@gmail.com>
To: linux-sunxi@lists.linux.dev
Cc: linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-iio@vger.kernel.org,
quentin.schulz@free-electrons.com, mripard@kernel.org,
tgamblin@baylibre.com, aidanmacdonald.0x0@gmail.com,
u.kleine-koenig@pengutronix.de, lee@kernel.org,
samuel@sholland.org, jernej.skrabec@gmail.com, sre@kernel.org,
wens@csie.org, conor+dt@kernel.org, krzk+dt@kernel.org,
robh@kernel.org, lars@metafoo.de, jic23@kernel.org,
jonathan.cameron@huawei.com,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V3 05/15] dt-bindings: power: supply: axp20x: Add input-current-limit-microamp
Date: Mon, 19 Aug 2024 11:46:09 -0500 [thread overview]
Message-ID: <20240819164619.556309-6-macroalpha82@gmail.com> (raw)
In-Reply-To: <20240819164619.556309-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Allow specifying a hard limit of the maximum input current. Some PMICs
such as the AXP717 can pull up to 3.25A, so allow a value to be
specified that clamps this in the event the hardware is not designed
for it.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
.../x-powers,axp20x-usb-power-supply.yaml | 69 ++++++++++++++++++-
1 file changed, 66 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
index 34b7959d6772..9cc300e78f60 100644
--- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
@@ -15,9 +15,6 @@ maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Sebastian Reichel <sre@kernel.org>
-allOf:
- - $ref: power-supply.yaml#
-
properties:
compatible:
oneOf:
@@ -31,8 +28,74 @@ properties:
- const: x-powers,axp803-usb-power-supply
- const: x-powers,axp813-usb-power-supply
+ input-current-limit-microamp:
+ description:
+ Optional value to clamp the maximum input current limit to for
+ the device. If omitted, the programmed value from the EFUSE will
+ be used.
required:
- compatible
+allOf:
+ - $ref: power-supply.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - x-powers,axp192-usb-power-supply
+ then:
+ properties:
+ input-current-limit-microamp:
+ enum: [100000, 500000]
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - x-powers,axp202-usb-power-supply
+ - x-powers,axp223-usb-power-supply
+ then:
+ properties:
+ input-current-limit-microamp:
+ enum: [100000, 500000, 900000]
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - x-powers,axp221-usb-power-supply
+ then:
+ properties:
+ input-current-limit-microamp:
+ enum: [500000, 900000]
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - x-powers,axp717-usb-power-supply
+ then:
+ properties:
+ input-current-limit-microamp:
+ description: Maximum input current in increments of 50000 uA.
+ minimum: 100000
+ maximum: 3250000
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - x-powers,axp813-usb-power-supply
+ then:
+ properties:
+ input-current-limit-microamp:
+ enum: [100000, 500000, 900000, 1500000, 2000000, 2500000,
+ 3000000, 3500000, 4000000]
+
additionalProperties: false
--
2.34.1
next prev parent reply other threads:[~2024-08-19 16:48 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-19 16:46 [PATCH V3 00/15] Add Battery and USB Supply for AXP717 Chris Morgan
2024-08-19 16:46 ` [PATCH V3 01/15] iio: adc: axp20x_adc: Add adc_en1 and adc_en1 to axp_data Chris Morgan
2024-08-19 16:46 ` [PATCH V3 02/15] power: supply: axp20x_battery: Remove design from min and max voltage Chris Morgan
2024-08-19 16:46 ` [PATCH V3 03/15] power: supply: axp20x_battery: Make iio and battery config per device Chris Morgan
2024-08-19 16:46 ` [PATCH V3 04/15] power: supply: axp20x_usb_power: Make VBUS and IIO " Chris Morgan
2024-08-19 16:46 ` Chris Morgan [this message]
2024-08-20 7:42 ` [PATCH V3 05/15] dt-bindings: power: supply: axp20x: Add input-current-limit-microamp Krzysztof Kozlowski
2024-08-20 20:15 ` Chris Morgan
2024-08-21 6:37 ` Krzysztof Kozlowski
2024-08-21 20:15 ` Chris Morgan
2024-08-19 16:46 ` [PATCH V3 06/15] power: supply: axp20x_usb_power: add input-current-limit-microamp Chris Morgan
2024-08-19 16:46 ` [PATCH V3 07/15] dt-bindings: power: supply: axp20x-battery: Add monitored-battery Chris Morgan
2024-08-19 16:46 ` [PATCH V3 08/15] dt-bindings: iio: adc: Add AXP717 compatible Chris Morgan
2024-08-19 16:46 ` [PATCH V3 09/15] dt-bindings: power: supply: axp20x: " Chris Morgan
2024-08-19 16:46 ` [PATCH V3 10/15] " Chris Morgan
2024-08-19 16:46 ` [PATCH V3 11/15] mfd: axp20x: Add ADC, BAT, and USB cells for AXP717 Chris Morgan
2024-08-19 16:46 ` [PATCH V3 12/15] iio: adc: axp20x_adc: add support for AXP717 ADC Chris Morgan
2024-08-19 16:46 ` [PATCH V3 13/15] power: supply: axp20x_usb_power: Add support for AXP717 Chris Morgan
2024-08-19 16:46 ` [PATCH V3 14/15] power: supply: axp20x_battery: add " Chris Morgan
2024-08-20 4:25 ` kernel test robot
2024-08-20 5:37 ` kernel test robot
2024-08-20 20:46 ` Chris Morgan
2024-08-19 16:46 ` [PATCH V3 15/15] arm64: dts: allwinner: h700: Add charger for Anbernic RG35XX Chris Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240819164619.556309-6-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=aidanmacdonald.0x0@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=jic23@kernel.org \
--cc=jonathan.cameron@huawei.com \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=macromorgan@hotmail.com \
--cc=mripard@kernel.org \
--cc=quentin.schulz@free-electrons.com \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=sre@kernel.org \
--cc=tgamblin@baylibre.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).