devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kyle Swenson <kyle.swenson@est.tech>
To: "o.rempel@pengutronix.de" <o.rempel@pengutronix.de>,
	"kory.maincent@bootlin.com" <kory.maincent@bootlin.com>,
	"davem@davemloft.net" <davem@davemloft.net>,
	"edumazet@google.com" <edumazet@google.com>,
	"kuba@kernel.org" <kuba@kernel.org>,
	"pabeni@redhat.com" <pabeni@redhat.com>,
	"robh@kernel.org" <robh@kernel.org>,
	"krzk+dt@kernel.org" <krzk+dt@kernel.org>,
	"conor+dt@kernel.org" <conor+dt@kernel.org>
Cc: "thomas.petazzoni@bootlin.com" <thomas.petazzoni@bootlin.com>,
	Kyle Swenson <kyle.swenson@est.tech>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Subject: [PATCH net-next 2/2] net: pse-pd: tps23881: support reset-gpios
Date: Mon, 19 Aug 2024 19:02:14 +0000	[thread overview]
Message-ID: <20240819190151.93253-3-kyle.swenson@est.tech> (raw)
In-Reply-To: <20240819190151.93253-1-kyle.swenson@est.tech>

The TPS23880/1 has an active-low reset pin that some boards connect to
the SoC to control when the TPS23880 is pulled out of reset.

Add support for this via a reset-gpios property in the DTS.

Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
---
 drivers/net/pse-pd/tps23881.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/net/pse-pd/tps23881.c b/drivers/net/pse-pd/tps23881.c
index 2ea75686a319..837e1a2119ee 100644
--- a/drivers/net/pse-pd/tps23881.c
+++ b/drivers/net/pse-pd/tps23881.c
@@ -6,16 +6,16 @@
  */
 
 #include <linux/bitfield.h>
 #include <linux/delay.h>
 #include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pse-pd/pse.h>
-
 #define TPS23881_MAX_CHANS 8
 
 #define TPS23881_REG_PW_STATUS	0x10
 #define TPS23881_REG_OP_MODE	0x12
 #define TPS23881_OP_MODE_SEMIAUTO	0xaaaa
@@ -735,10 +735,11 @@ static int tps23881_flash_sram_fw(struct i2c_client *client)
 
 static int tps23881_i2c_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct tps23881_priv *priv;
+	struct gpio_desc *reset;
 	int ret;
 	u8 val;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 		dev_err(dev, "i2c check functionality failed\n");
@@ -747,10 +748,20 @@ static int tps23881_i2c_probe(struct i2c_client *client)
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
+	reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(reset))
+		return dev_err_probe(&client->dev, PTR_ERR(reset), "Failed to get reset GPIO\n");
+
+	if (reset) {
+		usleep_range(1000, 10000);
+		gpiod_set_value_cansleep(reset, 0); /* De-assert reset */
+		usleep_range(1000, 10000);
+	}
+
 	ret = i2c_smbus_read_byte_data(client, TPS23881_REG_DEVID);
 	if (ret < 0)
 		return ret;
 
 	if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) {
-- 
2.43.0

  parent reply	other threads:[~2024-08-19 19:02 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-19 19:02 [PATCH net-next 0/2] net: pse-pd: tps23881: Reset GPIO support Kyle Swenson
2024-08-19 19:02 ` [PATCH net-next 1/2] dt-bindings: net: pse-pd: tps23881: add reset-gpios Kyle Swenson
2024-08-20  7:50   ` Krzysztof Kozlowski
2024-08-19 19:02 ` Kyle Swenson [this message]
2024-08-20  6:23   ` [PATCH net-next 2/2] net: pse-pd: tps23881: support reset-gpios Oleksij Rempel
2024-08-20 21:06     ` Kyle Swenson
2024-08-20 21:11       ` Kyle Swenson
2024-08-21  4:45         ` Oleksij Rempel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240819190151.93253-3-kyle.swenson@est.tech \
    --to=kyle.swenson@est.tech \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=kory.maincent@bootlin.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).