From: Richard Acayan <mailingradian@gmail.com>
To: Loic Poulain <loic.poulain@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Andi Shyti <andi.shyti@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Todor Tomov <todor.too@gmail.com>,
"Bryan O'Donoghue" <bryan.odonoghue@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Richard Acayan <mailingradian@gmail.com>,
linux-arm-msm@vger.kernel.org, linux-i2c@vger.kernel.org,
devicetree@vger.kernel.org, linux-media@vger.kernel.org
Subject: [PATCH v3 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss
Date: Mon, 19 Aug 2024 18:10:54 -0400 [thread overview]
Message-ID: <20240819221051.31489-9-mailingradian@gmail.com> (raw)
In-Reply-To: <20240819221051.31489-7-mailingradian@gmail.com>
As found in the Pixel 3a, the Snapdragon 670 has a camera subsystem with
3 CSIDs and 3 VFEs (including 1 VFE lite). Add this camera subsystem to
the bindings.
Adapted from SC8280XP camera subsystem.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
.../bindings/media/qcom,sdm670-camss.yaml | 319 ++++++++++++++++++
1 file changed, 319 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
new file mode 100644
index 000000000000..5789cf66a516
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
@@ -0,0 +1,319 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM670 Camera Subsystem (CAMSS)
+
+maintainers:
+ - Richard Acayan <mailingradian@gmail.com>
+
+description:
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+ compatible:
+ const: qcom,sdm670-camss
+
+ clocks:
+ maxItems: 22
+
+ clock-names:
+ items:
+ - const: camnoc_axi
+ - const: cpas_ahb
+ - const: csi0
+ - const: csi1
+ - const: csi2
+ - const: csiphy0
+ - const: csiphy0_timer
+ - const: csiphy1
+ - const: csiphy1_timer
+ - const: csiphy2
+ - const: csiphy2_timer
+ - const: gcc_camera_ahb
+ - const: gcc_camera_axi
+ - const: soc_ahb
+ - const: vfe0_axi
+ - const: vfe0
+ - const: vfe0_cphy_rx
+ - const: vfe1_axi
+ - const: vfe1
+ - const: vfe1_cphy_rx
+ - const: vfe_lite
+ - const: vfe_lite_cphy_rx
+
+ interrupts:
+ maxItems: 9
+
+ interrupt-names:
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: vfe0
+ - const: vfe1
+ - const: vfe_lite
+
+ iommus:
+ maxItems: 4
+
+ power-domains:
+ items:
+ - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+ power-domain-names:
+ items:
+ - const: ife0
+ - const: ife1
+ - const: top
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ description:
+ CSI input ports.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY0.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY1.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY2.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ reg:
+ maxItems: 9
+
+ reg-names:
+ items:
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: vfe0
+ - const: csid0
+ - const: vfe1
+ - const: csid1
+ - const: vfe_lite
+ - const: csid2
+
+ vdda-phy-supply:
+ description:
+ Phandle to a regulator supply to PHY core block.
+
+ vdda-pll-supply:
+ description:
+ Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interrupts
+ - interrupt-names
+ - iommus
+ - power-domains
+ - power-domain-names
+ - reg
+ - reg-names
+ - vdda-phy-supply
+ - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ camss@ac65000 {
+ compatible = "qcom,sdm670-camss";
+
+ reg = <0 0x0ac65000 0 0x1000>,
+ <0 0x0ac66000 0 0x1000>,
+ <0 0x0ac67000 0 0x1000>,
+ <0 0x0acaf000 0 0x4000>,
+ <0 0x0acb3000 0 0x1000>,
+ <0 0x0acb6000 0 0x4000>,
+ <0 0x0acba000 0 0x1000>,
+ <0 0x0acc4000 0 0x4000>,
+ <0 0x0acc8000 0 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "vfe0",
+ "csid0",
+ "vfe1",
+ "csid1",
+ "vfe_lite",
+ "csid2";
+
+ interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "vfe0",
+ "vfe1",
+ "vfe_lite";
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_AXI_CLK>,
+ <&camcc CAM_CC_SOC_AHB_CLK>,
+ <&camcc CAM_CC_IFE_0_AXI_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_1_AXI_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "csi0",
+ "csi1",
+ "csi2",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "gcc_camera_ahb",
+ "gcc_camera_axi",
+ "soc_ahb",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe_lite",
+ "vfe_lite_cphy_rx";
+
+ iommus = <&apps_smmu 0x808 0x0>,
+ <&apps_smmu 0x810 0x8>,
+ <&apps_smmu 0xc08 0x0>,
+ <&apps_smmu 0xc10 0x8>;
+
+ power-domains = <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc TITAN_TOP_GDSC>;
+ power-domain-names = "ife0",
+ "ife1",
+ "top";
+
+ vdda-phy-supply = <&vreg_l1a_1p225>;
+ vdda-pll-supply = <&vreg_l8a_1p8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csiphy_ep0: endpoint {
+ clock-lanes = <7>;
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&front_sensor_ep>;
+ };
+ };
+ };
+ };
+ };
--
2.46.0
next prev parent reply other threads:[~2024-08-19 22:11 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-19 22:10 [PATCH v3 0/5] Add SDM670 camera subsystem Richard Acayan
2024-08-19 22:10 ` [PATCH v3 1/5] dt-bindings: i2c: qcom-cci: Document SDM670 compatible Richard Acayan
2024-08-20 6:23 ` Krzysztof Kozlowski
2024-08-20 8:40 ` Vladimir Zapolskiy
2024-08-19 22:10 ` Richard Acayan [this message]
2024-08-20 7:31 ` [PATCH v3 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss Krzysztof Kozlowski
2024-08-20 9:15 ` Vladimir Zapolskiy
2024-08-20 9:56 ` Krzysztof Kozlowski
2024-08-20 11:37 ` Vladimir Zapolskiy
2024-08-19 22:10 ` [PATCH v3 3/5] media: qcom: camss: add support for SDM670 camss Richard Acayan
2024-08-20 9:45 ` Bryan O'Donoghue
2024-08-21 8:15 ` Vladimir Zapolskiy
2024-08-19 22:10 ` [PATCH v3 4/5] arm64: dts: qcom: sdm670: add camcc Richard Acayan
2024-08-20 9:23 ` Vladimir Zapolskiy
2024-08-20 9:26 ` Konrad Dybcio
2024-08-19 22:10 ` [PATCH v3 5/5] arm64: dts: qcom: sdm670: add camss and cci Richard Acayan
2024-08-20 9:40 ` Bryan O'Donoghue
2024-08-21 10:40 ` Vladimir Zapolskiy
2024-08-23 23:44 ` Richard Acayan
2024-08-24 11:56 ` Bryan O'Donoghue
2024-08-24 11:59 ` [PATCH] i2c: qcom-cci: Stop complaining about DT set clock rate Bryan O'Donoghue
2024-08-24 12:39 ` Vladimir Zapolskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240819221051.31489-9-mailingradian@gmail.com \
--to=mailingradian@gmail.com \
--cc=andersson@kernel.org \
--cc=andi.shyti@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=mchehab@kernel.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=todor.too@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).