devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: Krzysztof Kozlowski <krzk@kernel.org>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Rob Herring <robh@kernel.org>, Conor Dooley <conor+dt@kernel.org>,
	linux-kernel@vger.kernel.org (open list:NXP PTN5150A CC LOGIC
	AND EXTCON DRIVER),
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS)
Cc: imx@lists.linux.dev
Subject: [PATCH v4 1/1] dt-bindings: extcon: ptn5150: add child node port
Date: Tue, 20 Aug 2024 10:39:11 -0400	[thread overview]
Message-ID: <20240820143911.444048-1-Frank.Li@nxp.com> (raw)

Add child node 'port' to allow connect to usb controller to do role-switch
if id pin of ptn5150 have not connected to chip's usb ID function pin.

Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
        from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v3 to v4
- remove extra empty line
- fix Indentation in example
Change from v2 to v3
- only add port to existed example.
Change from v1 to v2
- add example for id pin have not connect to main chip's id example.
- commit 095b96b2b fix "port" warning, but add new warning "connector" is
not exist. And follow commit revert this change.
690085d866f08 Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector
- I have not board in hand to debug why "connector" is not work.
---
 .../devicetree/bindings/extcon/extcon-ptn5150.yaml    | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
index d5cfa32ea52dd..072b3c0c5fd03 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -37,6 +37,11 @@ properties:
       GPIO pin (output) used to control VBUS. If skipped, no such control
       takes place.
 
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the usb controller for the dual role switch.
+
 required:
   - compatible
   - interrupts
@@ -58,5 +63,11 @@ examples:
             interrupt-parent = <&msmgpio>;
             interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
             vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&usb1_drd_sw>;
+                };
+            };
         };
     };
-- 
2.34.1


             reply	other threads:[~2024-08-20 14:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-20 14:39 Frank Li [this message]
2024-08-22  7:03 ` [PATCH v4 1/1] dt-bindings: extcon: ptn5150: add child node port Krzysztof Kozlowski
2024-08-22 14:34 ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240820143911.444048-1-Frank.Li@nxp.com \
    --to=frank.li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).