devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bryan Brattlof <bb@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Bryan Brattlof <bb@ti.com>
Subject: [PATCH v2 1/4] arm64: dts: ti: k3-am62a: add opp frequencies
Date: Fri, 23 Aug 2024 16:54:28 -0500	[thread overview]
Message-ID: <20240823-opp-v2-1-e2f67b37c299@ti.com> (raw)
In-Reply-To: <20240823-opp-v2-0-e2f67b37c299@ti.com>

One power management technique available to the Cortex-A53s is their
ability to dynamically scale their frequency across the device's
Operating Performance Points (OPP)

The OPPs available for the Cortex-A53s on the AM62Ax can vary based on
the silicon variant used. The SoC variant is encoded into the
WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register which is used to limit
to only OPP entries the variant supports. A table of all these variants
can be found in it's data sheet[0] for the AM62Ax family.

Add the OPP table into the SoC's ftdi file along with the syscon node to
describe the WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register to detect
the SoC variant.

[0] https://www.ti.com/lit/ds/symlink/am62a3.pdf

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi |  5 +++
 arch/arm64/boot/dts/ti/k3-am62a7.dtsi       | 51 +++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index f5ac101a04dfa..0b1dd5390cd3f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -17,6 +17,11 @@ chipid: chipid@14 {
 			reg = <0x14 0x4>;
 		};
 
+		opp_efuse_table: syscon@18 {
+			compatible = "ti,am62-opp-efuse-table", "syscon";
+			reg = <0x18 0x4>;
+		};
+
 		cpsw_mac_syscon: ethernet-mac-syscon@200 {
 			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
 			reg = <0x200 0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
index f86a23404e6dd..6c99221beb6bd 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
@@ -48,6 +48,8 @@ cpu0: cpu@0 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 135 0>;
 		};
 
 		cpu1: cpu@1 {
@@ -62,6 +64,8 @@ cpu1: cpu@1 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 136 0>;
 		};
 
 		cpu2: cpu@2 {
@@ -76,6 +80,8 @@ cpu2: cpu@2 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 137 0>;
 		};
 
 		cpu3: cpu@3 {
@@ -90,6 +96,51 @@ cpu3: cpu@3 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 138 0>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		opp-shared;
+		syscon = <&opp_efuse_table>;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-supported-hw = <0x01 0x0006>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+			opp-suspend;
 		};
 	};
 

-- 
2.45.2


  reply	other threads:[~2024-08-23 21:54 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-23 21:54 [PATCH v2 0/4] arm64: dts: ti: k3-am62{a,p}x-sk: add opp frequencies Bryan Brattlof
2024-08-23 21:54 ` Bryan Brattlof [this message]
2024-08-23 21:54 ` [PATCH v2 2/4] arm64: dts: ti: k3-am62a7-sk: add 1.4ghz opp entry Bryan Brattlof
2024-08-23 21:54 ` [PATCH v2 3/4] arm64: dts: ti: k3-am62p: add opp frequencies Bryan Brattlof
2024-08-26 13:23   ` Dhruva Gole
2024-08-26 16:11     ` Bryan Brattlof
2024-08-27  4:25       ` Vignesh Raghavendra
2024-08-23 21:54 ` [PATCH v2 4/4] arm64: dts: ti: k3-am62p5-sk: add 1.4ghz opp entry Bryan Brattlof

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240823-opp-v2-1-e2f67b37c299@ti.com \
    --to=bb@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).