Re: [PATCH v3 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data

[Vasileios Amoiridis <vassilisamir@gmail.com>]

On Fri, Aug 23, 2024 at 09:47:22PM +0300, Andy Shevchenko wrote:
> On Fri, Aug 23, 2024 at 08:17:08PM +0200, Vasileios Amoiridis wrote:
> > Convert individual reads to a bulk read for the humidity calibration data.
> 
> ...
> 
> > +	calib->H2 = get_unaligned_le16(&data->bme280_humid_cal_buf[H2]);
> > +	calib->H3 = data->bme280_humid_cal_buf[H3];
> 
> > +	h4_upper = FIELD_GET(BME280_COMP_H4_GET_MASK_UP,
> > +			get_unaligned_be16(&data->bme280_humid_cal_buf[H4]));
> > +	h4_upper = FIELD_PREP(BME280_COMP_H4_PREP_MASK_UP, h4_upper);
> 
> This is a bit confusing. I would add a tmp variable and have this as
> 
> 	tmp = FIELD_GET(BME280_COMP_H4_GET_MASK_UP,
> 			get_unaligned_be16(&data->bme280_humid_cal_buf[H4]));
> 	h4_upper = FIELD_PREP(BME280_COMP_H4_PREP_MASK_UP, tmp);
> 
> Also note indentation issues.
> 

Hi Andy,

It's been a long time since you last reviewed code of mine, thanks for
finding the time to do this, I appreciate it a lot!

You are right, it looks confusing, I can do what you proposed. I don't
know how I didn't see it before.

Cheers,
Vasilis

> > +	h4_lower = FIELD_GET(BME280_COMP_H4_MASK_LOW,
> > +			get_unaligned_be16(&data->bme280_humid_cal_buf[H4]));
> > +	calib->H4 = sign_extend32(h4_upper | h4_lower, 11);
> > +	calib->H5 = sign_extend32(FIELD_GET(BME280_COMP_H5_MASK,
> > +			get_unaligned_le16(&data->bme280_humid_cal_buf[H5])), 11);
> > +	calib->H6 = data->bme280_humid_cal_buf[H6];
> 
> ...
> 
> >  		/* Calibration data buffers */
> >  		__le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2];
> >  		__be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2];
> 
> Side note: I would see rather sizeof(__Xe16) than 2:s in the above definitions.
> 
> > +		u8 bme280_humid_cal_buf[BME280_CONTIGUOUS_CALIB_REGS];
> 
> -- 
> With Best Regards,
> Andy Shevchenko
> 
>