devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: linux-wireless@vger.kernel.org
Cc: "Marek Vasut" <marex@denx.de>,
	"Alexis Lothoré" <alexis.lothore@bootlin.com>,
	"David S. Miller" <davem@davemloft.net>,
	"Adham Abozaeid" <adham.abozaeid@microchip.com>,
	"Ajay Singh" <ajay.kathat@microchip.com>,
	"Claudiu Beznea" <claudiu.beznea@tuxon.dev>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Eric Dumazet" <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Kalle Valo" <kvalo@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Rob Herring" <robh@kernel.org>,
	devicetree@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH v4 3/5] wifi: wilc1000: Fold chip_allow_sleep()/chip_wakeup() into wlan.c
Date: Thu, 29 Aug 2024 02:45:01 +0200	[thread overview]
Message-ID: <20240829004510.178016-3-marex@denx.de> (raw)
In-Reply-To: <20240829004510.178016-1-marex@denx.de>

Neither chip_allow_sleep()/chip_wakeup() is used outside of wlan.c .
Make both functions static and remove both the exported symbol and
entries from wlan.h .

Make chip_allow_sleep() return error code in preparation for the
follow up patches.

Move acquire_bus() and release_bus() to avoid forward declaration
of chip_allow_sleep()/chip_wakeup().

Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Adham Abozaeid <adham.abozaeid@microchip.com>
Cc: Ajay Singh <ajay.kathat@microchip.com>
Cc: Alexis Lothoré <alexis.lothore@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
---
V2: New patch
V3: No change
V4: Add RB from Alexis
---
 .../net/wireless/microchip/wilc1000/wlan.c    | 47 +++++++++----------
 .../net/wireless/microchip/wilc1000/wlan.h    |  2 -
 2 files changed, 23 insertions(+), 26 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 5b7dd37267de0..d228c5df82628 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -12,20 +12,6 @@
 
 #define WAKE_UP_TRIAL_RETRY		10000
 
-static inline void acquire_bus(struct wilc *wilc, enum bus_acquire acquire)
-{
-	mutex_lock(&wilc->hif_cs);
-	if (acquire == WILC_BUS_ACQUIRE_AND_WAKEUP && wilc->power_save_mode)
-		chip_wakeup(wilc);
-}
-
-static inline void release_bus(struct wilc *wilc, enum bus_release release)
-{
-	if (release == WILC_BUS_RELEASE_ALLOW_SLEEP && wilc->power_save_mode)
-		chip_allow_sleep(wilc);
-	mutex_unlock(&wilc->hif_cs);
-}
-
 static void wilc_wlan_txq_remove(struct wilc *wilc, u8 q_num,
 				 struct txq_entry_t *tqe)
 {
@@ -555,7 +541,7 @@ static struct rxq_entry_t *wilc_wlan_rxq_remove(struct wilc *wilc)
 	return rqe;
 }
 
-void chip_allow_sleep(struct wilc *wilc)
+static int chip_allow_sleep(struct wilc *wilc)
 {
 	u32 reg = 0;
 	const struct wilc_hif_func *hif_func = wilc->hif_func;
@@ -584,7 +570,7 @@ void chip_allow_sleep(struct wilc *wilc)
 	while (--trials) {
 		ret = hif_func->hif_read_reg(wilc, to_host_from_fw_reg, &reg);
 		if (ret)
-			return;
+			return ret;
 		if ((reg & to_host_from_fw_bit) == 0)
 			break;
 	}
@@ -594,28 +580,28 @@ void chip_allow_sleep(struct wilc *wilc)
 	/* Clear bit 1 */
 	ret = hif_func->hif_read_reg(wilc, wakeup_reg, &reg);
 	if (ret)
-		return;
+		return ret;
 	if (reg & wakeup_bit) {
 		reg &= ~wakeup_bit;
 		ret = hif_func->hif_write_reg(wilc, wakeup_reg, reg);
 		if (ret)
-			return;
+			return ret;
 	}
 
 	ret = hif_func->hif_read_reg(wilc, from_host_to_fw_reg, &reg);
 	if (ret)
-		return;
+		return ret;
 	if (reg & from_host_to_fw_bit) {
 		reg &= ~from_host_to_fw_bit;
 		ret = hif_func->hif_write_reg(wilc, from_host_to_fw_reg, reg);
 		if (ret)
-			return;
-
+			return ret;
 	}
+
+	return 0;
 }
-EXPORT_SYMBOL_GPL(chip_allow_sleep);
 
-void chip_wakeup(struct wilc *wilc)
+static void chip_wakeup(struct wilc *wilc)
 {
 	u32 ret = 0;
 	u32 clk_status_val = 0, trials = 0;
@@ -674,7 +660,20 @@ void chip_wakeup(struct wilc *wilc)
 	if (wilc->io_type == WILC_HIF_SPI)
 		wilc->hif_func->hif_reset(wilc);
 }
-EXPORT_SYMBOL_GPL(chip_wakeup);
+
+static inline void acquire_bus(struct wilc *wilc, enum bus_acquire acquire)
+{
+	mutex_lock(&wilc->hif_cs);
+	if (acquire == WILC_BUS_ACQUIRE_AND_WAKEUP && wilc->power_save_mode)
+		chip_wakeup(wilc);
+}
+
+static inline void release_bus(struct wilc *wilc, enum bus_release release)
+{
+	if (release == WILC_BUS_RELEASE_ALLOW_SLEEP && wilc->power_save_mode)
+		chip_allow_sleep(wilc);
+	mutex_unlock(&wilc->hif_cs);
+}
 
 void host_wakeup_notify(struct wilc *wilc)
 {
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index ae187192a79c6..e75a5c8aaecec 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -438,8 +438,6 @@ void wilc_wfi_p2p_rx(struct wilc_vif *vif, u8 *buff, u32 size);
 bool wilc_wfi_mgmt_frame_rx(struct wilc_vif *vif, u8 *buff, u32 size);
 void host_wakeup_notify(struct wilc *wilc);
 void host_sleep_notify(struct wilc *wilc);
-void chip_allow_sleep(struct wilc *wilc);
-void chip_wakeup(struct wilc *wilc);
 int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
 			 u32 count);
 int wilc_wlan_init(struct net_device *dev);
-- 
2.45.2


  parent reply	other threads:[~2024-08-29  0:45 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-29  0:44 [PATCH v4 1/5] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string Marek Vasut
2024-08-29  0:45 ` [PATCH v4 2/5] wifi: wilc1000: Fold wilc_get_chipid() into wlan.c Marek Vasut
2024-08-29  0:45 ` Marek Vasut [this message]
2024-08-29  0:45 ` [PATCH v4 4/5] wifi: wilc1000: Fill in missing error handling Marek Vasut
2024-08-29  0:45 ` [PATCH v4 5/5] wifi: wilc1000: Add WILC3000 support Marek Vasut
2024-09-09  9:35   ` Kalle Valo
2024-09-09 14:46     ` Marek Vasut
2024-09-09 15:04       ` Kalle Valo
2024-09-09 19:54         ` Marek Vasut
2024-09-09 16:51     ` Ajay.Kathat
2024-09-09 17:31       ` Kalle Valo
2024-09-09 21:11         ` Ajay.Kathat
2024-09-09 22:02           ` Marek Vasut
2024-09-10  5:03             ` Kalle Valo
2024-09-03 16:09 ` [PATCH v4 1/5] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string Alexis Lothoré
2024-09-03 18:47   ` Krzysztof Kozlowski
2024-09-04 14:32     ` Alexis Lothoré
2024-09-03 19:30   ` Marek Vasut
2024-09-04 14:50     ` Alexis Lothoré
2024-09-04 17:45       ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240829004510.178016-3-marex@denx.de \
    --to=marex@denx.de \
    --cc=adham.abozaeid@microchip.com \
    --cc=ajay.kathat@microchip.com \
    --cc=alexis.lothore@bootlin.com \
    --cc=claudiu.beznea@tuxon.dev \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=kvalo@kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).