devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
	Steev Klimaszewski <steev@kali.org>
Subject: [PATCH v3 3/4] arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
Date: Thu,  5 Sep 2024 14:20:21 +0200	[thread overview]
Message-ID: <20240905122023.47251-4-brgl@bgdev.pl> (raw)
In-Reply-To: <20240905122023.47251-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add a node for the PMU of the WCN6855 and rework the inputs of the wifi
and bluetooth nodes to consume the PMU's outputs.

Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 98 ++++++++++++++++---
 1 file changed, 86 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 6a28cab97189..88b31550f9df 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -400,6 +400,67 @@ usb1_sbu_mux: endpoint {
 			};
 		};
 	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-0 = <&wlan_en>;
+		pinctrl-names = "default";
+
+		wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s10b>;
+		vddaon-supply = <&vreg_s12b>;
+		vddpmu-supply = <&vreg_s12b>;
+		vddrfa0p95-supply = <&vreg_s12b>;
+		vddrfa1p3-supply = <&vreg_s11b>;
+		vddrfa1p9-supply = <&vreg_s1c>;
+		vddpcie1p3-supply = <&vreg_s11b>;
+		vddpcie1p9-supply = <&vreg_s1c>;
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -927,6 +988,16 @@ wifi@0 {
 		compatible = "pci17cb,1103";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
 		qcom,ath11k-calibration-variant = "LE_X13S";
 	};
 };
@@ -1258,20 +1329,16 @@ &uart2 {
 	bluetooth {
 		compatible = "qcom,wcn6855-bt";
 
-		vddio-supply = <&vreg_s10b>;
-		vddbtcxmx-supply = <&vreg_s12b>;
-		vddrfacmn-supply = <&vreg_s12b>;
-		vddrfa0p8-supply = <&vreg_s12b>;
-		vddrfa1p2-supply = <&vreg_s11b>;
-		vddrfa1p7-supply = <&vreg_s1c>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
 
 		max-speed = <3200000>;
-
-		enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
-		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-0 = <&bt_default>;
-		pinctrl-names = "default";
 	};
 };
 
@@ -1761,4 +1828,11 @@ reset-pins {
 			bias-disable;
 		};
 	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio134";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
 };
-- 
2.43.0


  parent reply	other threads:[~2024-09-05 12:20 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-05 12:20 [PATCH v3 0/4] arm64: dts: qcom: sc8280xp: enable WLAN and Bluetooth Bartosz Golaszewski
2024-09-05 12:20 ` [PATCH v3 1/4] arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855 Bartosz Golaszewski
2024-09-05 12:50   ` Dmitry Baryshkov
2024-09-05 12:53     ` Bartosz Golaszewski
2024-09-05 12:56       ` Dmitry Baryshkov
2024-09-05 13:00         ` Bartosz Golaszewski
2024-09-05 13:13           ` Konrad Dybcio
2024-09-05 18:41             ` Kalle Valo
2024-09-05 19:26               ` Dmitry Baryshkov
2024-09-06  7:45                 ` Bartosz Golaszewski
2024-09-06  9:37                   ` Dmitry Baryshkov
2024-09-06  9:45                     ` Bartosz Golaszewski
2024-09-09 11:18                       ` Kalle Valo
2024-09-06 14:53                 ` Johan Hovold
2024-09-06 21:37                   ` Dmitry Baryshkov
2024-09-05 12:20 ` [PATCH v3 2/4] arm64: dts: qcom: sc8280xp-crd: enable bluetooth Bartosz Golaszewski
2024-09-05 12:20 ` Bartosz Golaszewski [this message]
2024-09-05 12:27   ` [PATCH v3 3/4] arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855 Dmitry Baryshkov
2024-09-05 12:29     ` Bartosz Golaszewski
2024-09-05 12:20 ` [PATCH v3 4/4] arm64: dts: qcom: sc8280xp-x13s: keep less regulators always-on Bartosz Golaszewski
2024-09-05 14:04   ` Johan Hovold
2024-09-05 18:23     ` Bartosz Golaszewski
2024-09-05 19:27       ` Dmitry Baryshkov
2024-09-06 14:49         ` Johan Hovold
2024-09-06 21:37           ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240905122023.47251-4-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=andersson@kernel.org \
    --cc=bartosz.golaszewski@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=steev@kali.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).