From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: patrick@stwcx.xyz
Cc: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH v15 00/32] Add i2c-mux and eeprom devices for Meta Yosemite 4
Date: Fri, 6 Sep 2024 14:26:26 +0800 [thread overview]
Message-ID: <20240906062701.37088-1-Delphine_CC_Chiu@wiwynn.com> (raw)
Changelog:
- v15
- Add ISL28022 support
- v14
- Add SQ52205 support
- Add GPIO I6 pin
- v13
- Add RTQ6056-support-on-bus-11
- v12
- Fix GPIO linename typo and add missing GPIO pin initial state.
- v11
- Revise all GPIO line name with bottom line
- v10
- adjust mgm cpld ioexp bus
- add GPIOO7 name
- remove mctp driver
- v9
- add XDP710 support
- add RTQ6056 support
- add MP5990 support
- v8
- add fan led config
- v7
- Revise pca9506 i2c address
- v6
- Revise i2c duty-cycle for meeting 400khz spec
- v5
- Support medusa board adc sensors
- support NIC eeprom
- v4
- Re-format gpio linename
- Revise i2c device node names
- Split patches by logic changes
- v3
- Correct patch for revising gpio name
- v2
- Revise mx31790 fan tach config
- Add mctp config for NIC
- Support mux to cpld
- Revise gpio name
- v1
- Add gpio and eeprom behind i2c-mux
- Remove redundant idle-state setting for i2c-mux
- Enable adc 15, wdt2,spi gpio for yosemite4 use
- Revise quad mode to dual mode to avoid WP pin influnece the SPI
- Revise power sensor adm1281 for yosemite4 schematic change
- Add gpio pca9506 I/O expander for yosemite4 use
- remove space for adm1272 compatible
- enable interrupt setting for pca9555
- add eeprom for yosemite4 medusa board/BSM use
- remove temperature sensor for yosemite4 schematic change
- add power sensor for power module reading
- Revise adc128d818 adc mode for yosemite4 schematic change
- Revise ina233 for yosemite4 schematic change
- Remove idle state setting for yosemite4 NIC connection
- Initialize bmc gpio state
- Revise mx31790 fan tach config
- Add mctp config for NIC
- Support mux to cpld
- Revise gpio name
Delphine CC Chiu (31):
ARM: dts: aspeed: yosemite4: Revise i2c-mux devices
ARM: dts: aspeed: yosemite4: Enable adc15
ARM: dts: aspeed: yosemite4: Enable spi-gpio setting
ARM: dts: aspeed: yosemite4: Enable watchdog2
ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode
ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic
change
ARM: dts: aspeed: yosemite4: Add gpio pca9506
ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible
ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555
ARM: dts: aspeed: yosemite4: Add power sensor for power module reading
ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use
ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4
schematic change
ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode for yosemite4
schematic change
ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4
schematic change
ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4
NIC connection
ARM: dts: aspeed: yosemite4: Initialize bmc gpio state
ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config
ARM: dts: aspeed: yosemite4: add mctp config for NIC
ARM: dts: aspeed: yosemite4: support mux to cpld
ARM: dts: aspeed: yosemite4: support medusa board adc sensors
ARM: dts: aspeed: yosemite4: support NIC eeprom
ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle
ARM: dts: aspeed: yosemite4: add fan led config
ARM: dts: aspeed: yosemite4: add XDP710
ARM: dts: aspeed: yosemite4: add RTQ6056 support
ARM: dts: aspeed: yosemite4: add MP5990 support
ARM: dts: aspeed: yosemite4: Adjust ioexp bus and remove mctp driver
ARM: dts: aspeed: yosemite4: fix GPIO linename typo
ARM: dts: aspeed: yosemite4: add SQ52205 support
ARM: dts: aspeed: yosemite4: add GPIO I6
ARM: dts: aspeed: yosemite4: add ISL28022 support on 11
Ian-I-Chien (1):
ARM: dts: aspeed: yosemitet4: add RTQ6056 support on 11 (0x41).
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 1753 ++++++++++++++++-
1 file changed, 1657 insertions(+), 96 deletions(-)
--
2.25.1
next reply other threads:[~2024-09-06 6:27 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-06 6:26 Delphine CC Chiu [this message]
2024-09-06 6:26 ` [PATCH v15 01/32] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 02/32] ARM: dts: aspeed: yosemite4: Enable adc15 Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 03/32] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 04/32] ARM: dts: aspeed: yosemite4: Enable watchdog2 Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 05/32] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 06/32] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 07/32] ARM: dts: aspeed: yosemite4: Add gpio pca9506 Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 08/32] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible Delphine CC Chiu
2024-09-06 7:34 ` Geert Uytterhoeven
2024-09-06 6:26 ` [PATCH v15 09/32] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555 Delphine CC Chiu
2024-09-06 9:30 ` Krzysztof Kozlowski
2024-09-06 6:26 ` [PATCH v15 10/32] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 11/32] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 12/32] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 13/32] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode " Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 14/32] ARM: dts: aspeed: yosemite4: Revise ina233 config " Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 15/32] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 16/32] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 17/32] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 18/32] ARM: dts: aspeed: yosemite4: add mctp config for NIC Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 19/32] ARM: dts: aspeed: yosemite4: support mux to cpld Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 20/32] ARM: dts: aspeed: yosemite4: support medusa board adc sensors Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 21/32] ARM: dts: aspeed: yosemite4: support NIC eeprom Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 22/32] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle Delphine CC Chiu
2024-09-06 7:42 ` Geert Uytterhoeven
2024-09-06 6:26 ` [PATCH v15 23/32] ARM: dts: aspeed: yosemite4: add fan led config Delphine CC Chiu
2024-09-06 7:45 ` Geert Uytterhoeven
2024-09-06 6:26 ` [PATCH v15 24/32] ARM: dts: aspeed: yosemite4: add XDP710 Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 25/32] ARM: dts: aspeed: yosemite4: add RTQ6056 support Delphine CC Chiu
2024-09-06 9:25 ` Krzysztof Kozlowski
2024-09-06 6:26 ` [PATCH v15 26/32] ARM: dts: aspeed: yosemite4: add MP5990 support Delphine CC Chiu
2024-09-06 9:25 ` Krzysztof Kozlowski
2024-09-06 6:26 ` [PATCH v15 27/32] ARM: dts: aspeed: yosemite4: Adjust ioexp bus and remove mctp driver Delphine CC Chiu
2024-09-06 6:26 ` [PATCH v15 28/32] ARM: dts: aspeed: yosemite4: fix GPIO linename typo Delphine CC Chiu
2024-09-06 9:27 ` Krzysztof Kozlowski
2024-09-06 6:26 ` [PATCH v15 29/32] ARM: dts: aspeed: yosemitet4: add RTQ6056 support on 11 (0x41) Delphine CC Chiu
2024-09-06 9:28 ` Krzysztof Kozlowski
2024-09-06 6:26 ` [PATCH v15 30/32] ARM: dts: aspeed: yosemite4: add SQ52205 support Delphine CC Chiu
2024-09-06 7:38 ` Geert Uytterhoeven
2024-09-06 9:28 ` Krzysztof Kozlowski
2024-09-06 6:26 ` [PATCH v15 31/32] ARM: dts: aspeed: yosemite4: add GPIO I6 Delphine CC Chiu
2024-09-06 9:29 ` Krzysztof Kozlowski
2024-09-06 6:26 ` [PATCH v15 32/32] ARM: dts: aspeed: yosemite4: add ISL28022 support on 11 Delphine CC Chiu
2024-09-06 6:37 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-06 9:29 ` Krzysztof Kozlowski
2024-09-06 9:34 ` [PATCH v15 00/32] Add i2c-mux and eeprom devices for Meta Yosemite 4 Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240906062701.37088-1-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=patrick@stwcx.xyz \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox