From: Lorenzo Bianconi <lorenzo@kernel.org>
To: "Lorenzo Bianconi" <lorenzo@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Sean Wang" <sean.wang@kernel.org>,
"Matthias Brugger" <matthias.bgg@gmail.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
"Lee Jones" <lee@kernel.org>,
"Uwe Kleine-König" <ukleinek@kernel.org>
Cc: linux-mediatek@lists.infradead.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, upstream@airoha.com,
benjamin.larsson@genexis.eu, ansuelsmth@gmail.com,
linux-pwm@vger.kernel.org
Subject: [PATCH v4 2/5] dt-bindings: mfd: Add support for Airoha EN7581 GPIO System Controller
Date: Wed, 11 Sep 2024 21:50:02 +0200 [thread overview]
Message-ID: <20240911-en7581-pinctrl-v4-2-60ac93d760bb@kernel.org> (raw)
In-Reply-To: <20240911-en7581-pinctrl-v4-0-60ac93d760bb@kernel.org>
From: Christian Marangi <ansuelsmth@gmail.com>
Add support for Airoha EN7581 GPIO System Controller which provide a
register map for controlling the GPIO, pinctrl and PWM of the SoC.
Schema define cells for both gpio/interrupt controller and PWM.
Moreover it provides a dedicated pinctrl node for pins and config
definitions.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
.../bindings/mfd/airoha,en7581-gpio-sysctl.yaml | 433 +++++++++++++++++++++
1 file changed, 433 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml
new file mode 100644
index 000000000000..98396db40e67
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml
@@ -0,0 +1,433 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/airoha,en7581-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 GPIO System Controller
+
+maintainers:
+ - Christian Marangi <ansuelsmth@gmail.com>
+ - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+ Airoha EN7581 SoC GPIO system controller which provided a register map
+ for controlling the GPIO, pins and PWM of the SoC.
+
+properties:
+ compatible:
+ const: airoha,en7581-gpio-sysctl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ "#pwm-cells":
+ const: 3
+
+ pinctrl:
+ type: object
+
+ $ref: /schemas/pinctrl/pinctrl.yaml
+
+ patternProperties:
+ '-pins$':
+ type: object
+
+ patternProperties:
+ '^mux(-|$)':
+ type: object
+
+ description:
+ pinmux configuration nodes.
+
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [pon, tod_1pps, sipo, mdio, uart, i2c, jtag, pcm, spi,
+ pcm_spi, i2s, emmc, pnand, pcie_reset, pwm, phy1_led0,
+ phy2_led0, phy3_led0, phy4_led0, phy1_led1, phy2_led1,
+ phy3_led1, phy4_led1]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+
+ required:
+ - function
+ - groups
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: pon
+ then:
+ properties:
+ groups:
+ enum: [pon]
+ - if:
+ properties:
+ function:
+ const: tod_1pps
+ then:
+ properties:
+ groups:
+ enum: [pon_tod_1pps, gsw_tod_1pps]
+ - if:
+ properties:
+ function:
+ const: sipo
+ then:
+ properties:
+ groups:
+ enum: [sipo, sipo_rclk]
+ - if:
+ properties:
+ function:
+ const: mdio
+ then:
+ properties:
+ groups:
+ enum: [mdio]
+ - if:
+ properties:
+ function:
+ const: uart
+ then:
+ properties:
+ groups:
+ items:
+ enum: [uart2, uart2_cts_rts, hsuart, hsuart_cts_rts, uart4,
+ uart5]
+ maxItems: 2
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c1]
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [jtag_udi, jtag_dfd]
+ - if:
+ properties:
+ function:
+ const: pcm
+ then:
+ properties:
+ groups:
+ enum: [pcm1, pcm2]
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ items:
+ enum: [spi_quad, spi_cs1]
+ maxItems: 2
+ - if:
+ properties:
+ function:
+ const: pcm_spi
+ then:
+ properties:
+ groups:
+ items:
+ enum: [pcm_spi, pcm_spi_int, pcm_spi_rst, pcm_spi_cs1,
+ pcm_spi_cs2_p156, pcm_spi_cs2_p128, pcm_spi_cs3,
+ pcm_spi_cs4]
+ maxItems: 7
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2s]
+ - if:
+ properties:
+ function:
+ const: emmc
+ then:
+ properties:
+ groups:
+ enum: [emmc]
+ - if:
+ properties:
+ function:
+ const: pnand
+ then:
+ properties:
+ groups:
+ enum: [pnand]
+ - if:
+ properties:
+ function:
+ const: pcie_reset
+ then:
+ properties:
+ groups:
+ enum: [pcie_reset0, pcie_reset1, pcie_reset2]
+ - if:
+ properties:
+ function:
+ const: pwm
+ then:
+ properties:
+ groups:
+ enum: [gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6,
+ gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13,
+ gpio14, gpio15, gpio16, gpio17, gpio18, gpio19,
+ gpio20, gpio21, gpio22, gpio23, gpio24, gpio25,
+ gpio26, gpio27, gpio28, gpio29, gpio30, gpio31,
+ gpio36, gpio37, gpio38, gpio39, gpio40, gpio41,
+ gpio42, gpio43, gpio44, gpio45, gpio46, gpio47]
+ - if:
+ properties:
+ function:
+ const: phy1_led0
+ then:
+ properties:
+ groups:
+ enum: [gpio33, gpio34, gpio35, gpio42]
+ - if:
+ properties:
+ function:
+ const: phy2_led0
+ then:
+ properties:
+ groups:
+ enum: [gpio33, gpio34, gpio35, gpio42]
+ - if:
+ properties:
+ function:
+ const: phy3_led0
+ then:
+ properties:
+ groups:
+ enum: [gpio33, gpio34, gpio35, gpio42]
+ - if:
+ properties:
+ function:
+ const: phy4_led0
+ then:
+ properties:
+ groups:
+ enum: [gpio33, gpio34, gpio35, gpio42]
+ - if:
+ properties:
+ function:
+ const: phy1_led1
+ then:
+ properties:
+ groups:
+ enum: [gpio43, gpio44, gpio45, gpio46]
+ - if:
+ properties:
+ function:
+ const: phy2_led1
+ then:
+ properties:
+ groups:
+ enum: [gpio43, gpio44, gpio45, gpio46]
+ - if:
+ properties:
+ function:
+ const: phy3_led1
+ then:
+ properties:
+ groups:
+ enum: [gpio43, gpio44, gpio45, gpio46]
+ - if:
+ properties:
+ function:
+ const: phy4_led1
+ then:
+ properties:
+ groups:
+ enum: [gpio43, gpio44, gpio45, gpio46]
+
+ additionalProperties: false
+
+ '^conf(-|$)':
+ type: object
+
+ description:
+ pinconf configuration nodes.
+
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description:
+ An array of strings. Each string contains the name of a pin.
+ items:
+ enum: [uart1_txd, uart1_rxd, i2c_scl, i2c_sda, spi_cs0, spi_clk,
+ spi_mosi, spi_miso, gpio0, gpio1, gpio2, gpio3, gpio4,
+ gpio5, gpio6, gpio7, gpio8, gpio9, gpio10, gpio11, gpio12,
+ gpio13, gpio14, gpio15, gpio16, gpio17, gpio18, gpio19,
+ gpio20, gpio21, gpio22, gpio23, gpio24, gpio25, gpio26,
+ gpio27, gpio28, gpio29, gpio30, gpio31, gpio32, gpio33,
+ gpio34, gpio35, gpio36, gpio37, gpio38, gpio39, gpio40,
+ gpio41, gpio42, gpio43, gpio44, gpio45, gpio46,
+ pcie_reset0, pcie_reset1, pcie_reset2]
+ minItems: 1
+ maxItems: 58
+
+ bias-disable: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ input-enable: true
+
+ output-enable: true
+
+ output-low: true
+
+ output-high: true
+
+ drive-open-drain: true
+
+ drive-strength:
+ description:
+ Selects the drive strength for MIO pins, in mA.
+ enum: [2, 4, 6, 8]
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - gpio-controller
+ - "#gpio-cells"
+ - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mfd@1fbf0200 {
+ compatible = "airoha,en7581-gpio-sysctl";
+ reg = <0x1fbf0200 0xc0>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ #pwm-cells = <3>;
+
+ pinctrl {
+ pcie1-rst-pins {
+ conf {
+ pins = "pcie_reset1";
+ drive-open-drain = <1>;
+ };
+ };
+
+ pwm-pins {
+ mux {
+ function = "pwm";
+ groups = "gpio18";
+ };
+ };
+
+ spi-pins {
+ mux {
+ function = "spi";
+ groups = "spi_quad", "spi_cs1";
+ };
+ };
+
+ uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2", "uart2_cts_rts";
+ };
+ };
+
+ uar5-pins {
+ mux {
+ function = "uart";
+ groups = "uart5";
+ };
+ };
+
+ mmc-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc";
+ };
+ };
+
+ mdio-pins {
+ mux {
+ function = "mdio";
+ groups = "mdio";
+ };
+
+ conf {
+ pins = "gpio2";
+ output-enable;
+ };
+ };
+
+ gswp1-led0-pins {
+ mux {
+ function = "phy1_led0";
+ groups = "gpio33";
+ };
+ };
+
+ gswp2-led1-pins {
+ mux {
+ function = "phy2_led1";
+ groups = "gpio44";
+ };
+ };
+ };
+ };
+
+...
--
2.46.0
next prev parent reply other threads:[~2024-09-11 19:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-11 19:50 [PATCH v4 0/5] Add mfd, pinctrl and pwm support to EN7581 SoC Lorenzo Bianconi
2024-09-11 19:50 ` [PATCH v4 1/5] dt-bindings: arm: airoha: Add the chip-scu node for " Lorenzo Bianconi
2024-09-11 21:12 ` Rob Herring (Arm)
2024-09-11 21:46 ` Lorenzo Bianconi
2024-09-12 16:43 ` Rob Herring
2024-09-11 19:50 ` Lorenzo Bianconi [this message]
2024-09-11 21:12 ` [PATCH v4 2/5] dt-bindings: mfd: Add support for Airoha EN7581 GPIO System Controller Rob Herring (Arm)
2024-09-11 21:48 ` Lorenzo Bianconi
2024-09-12 16:44 ` Rob Herring (Arm)
2024-09-11 19:50 ` [PATCH v4 3/5] mfd: airoha: Add support for Airoha EN7581 MFD Lorenzo Bianconi
2024-09-11 19:50 ` [PATCH v4 4/5] pinctrl: airoha: Add support for EN7581 SoC Lorenzo Bianconi
2024-09-24 7:34 ` Linus Walleij
2024-09-24 10:12 ` Lorenzo Bianconi
2024-09-24 21:22 ` Lorenzo Bianconi
2024-10-02 12:58 ` Linus Walleij
2024-10-02 15:36 ` Lorenzo Bianconi
2024-09-11 19:50 ` [PATCH v4 5/5] pwm: " Lorenzo Bianconi
2024-09-23 9:53 ` [PATCH v4 0/5] Add mfd, pinctrl and pwm support to " Christian Marangi
2024-09-25 9:47 ` Lee Jones
2024-09-25 9:51 ` Christian Marangi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240911-en7581-pinctrl-v4-2-60ac93d760bb@kernel.org \
--to=lorenzo@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=ansuelsmth@gmail.com \
--cc=benjamin.larsson@genexis.eu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pwm@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
--cc=sean.wang@kernel.org \
--cc=ukleinek@kernel.org \
--cc=upstream@airoha.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).