[PATCH v6 2/4] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices

[Vasileios Amoiridis <vassilisamir@gmail.com>]

Add interrupt options for BMP3xx and BMP5xx devices as well.

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
---
 .../bindings/iio/pressure/bmp085.yaml         | 22 ++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 6fda887ee9d4..7c9d85be9008 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -48,14 +48,34 @@ properties:
 
   interrupts:
     description:
-      interrupt mapping for IRQ (BMP085 only)
+      interrupt mapping for IRQ. Supported in BMP085, BMP3xx, BMP5xx
     maxItems: 1
 
+  drive-open-drain:
+    description:
+      set if the interrupt pin should be configured as open drain.
+      If not set, defaults to push-pull configuration.
+    type: boolean
+
 required:
   - compatible
   - vddd-supply
   - vdda-supply
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - bosch,bmp085
+                - bosch,bmp380
+                - bosch,bmp580
+    then:
+      properties:
+        interrupts: false
+
 additionalProperties: false
 
 examples:
-- 
2.25.1