From: Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Daniel Baluta <daniel.baluta@nxp.com>,
Shengjiu Wang <shengjiu.wang@nxp.com>,
Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/5] arm64: dts: imx8qxp: configure dsp node for rproc usage
Date: Wed, 18 Sep 2024 14:21:14 -0400 [thread overview]
Message-ID: <20240918182117.86221-3-laurentiumihalcea111@gmail.com> (raw)
In-Reply-To: <20240918182117.86221-1-laurentiumihalcea111@gmail.com>
From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Currently, the dsp node is configured for SOF usage, which
is not the "default" case and should be done in a separate
SOF DTS. As such, configure the dsp node for rproc usage,
which is the "default" case.
This also includes the addition of the 2 optional
power domains which may be required by some applications.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
.../boot/dts/freescale/imx8-ss-audio.dtsi | 20 +++++++++----------
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 15 +++++++++++++-
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 19 ++++++++++++++++++
3 files changed, 42 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index ff5df0fed9e9..28970211dd67 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -431,22 +431,20 @@ dsp_ram_lpcg: clock-controller@59590000 {
};
dsp: dsp@596e8000 {
- compatible = "fsl,imx8qxp-dsp";
+ compatible = "fsl,imx8qxp-hifi4";
reg = <0x596e8000 0x88000>;
clocks = <&dsp_lpcg IMX_LPCG_CLK_5>,
<&dsp_ram_lpcg IMX_LPCG_CLK_4>,
<&dsp_lpcg IMX_LPCG_CLK_7>;
clock-names = "ipg", "ocram", "core";
- power-domains = <&pd IMX_SC_R_MU_13A>,
- <&pd IMX_SC_R_MU_13B>,
- <&pd IMX_SC_R_DSP>,
- <&pd IMX_SC_R_DSP_RAM>;
- mbox-names = "txdb0", "txdb1",
- "rxdb0", "rxdb1";
- mboxes = <&lsio_mu13 2 0>,
- <&lsio_mu13 2 1>,
- <&lsio_mu13 3 0>,
- <&lsio_mu13 3 1>;
+ power-domains = <&pd IMX_SC_R_MU_13B>,
+ <&pd IMX_SC_R_IRQSTR_DSP>,
+ <&pd IMX_SC_R_MU_2A>;
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&lsio_mu13 0 0>,
+ <&lsio_mu13 1 0>,
+ <&lsio_mu13 3 0>;
+ firmware-name = "imx/dsp/hifi4.bin";
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 936ba5ecdcac..527933a3eb5c 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -63,7 +63,8 @@ sound-wm8960 {
};
&dsp {
- memory-region = <&dsp_reserved>;
+ memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+ <&dsp_vdev0vring1>, <&dsp_reserved>;
status = "okay";
};
@@ -71,6 +72,18 @@ &dsp_reserved {
status = "okay";
};
+&dsp_vdev0buffer {
+ status = "okay";
+};
+
+&dsp_vdev0vring0 {
+ status = "okay";
+};
+
+&dsp_vdev0vring1 {
+ status = "okay";
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 0313f295de2e..9522a65b3e22 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -186,6 +186,25 @@ dsp_reserved: dsp@92400000 {
status = "disabled";
};
+ dsp_vdev0vring0: vdev0vring0@942f0000 {
+ reg = <0 0x942f0000 0 0x8000>;
+ no-map;
+ status = "disabled";
+ };
+
+ dsp_vdev0vring1: vdev0vring1@942f8000 {
+ reg = <0 0x942f8000 0 0x8000>;
+ no-map;
+ status = "disabled";
+ };
+
+ dsp_vdev0buffer: vdev0buffer@94300000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x94300000 0 0x100000>;
+ no-map;
+ status = "disabled";
+ };
+
encoder_rpc: encoder-rpc@94400000 {
reg = <0 0x94400000 0 0x700000>;
no-map;
--
2.34.1
next prev parent reply other threads:[~2024-09-18 18:22 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-18 18:21 [PATCH 0/5] configure imx8 dsp DT node for rproc usage Laurentiu Mihalcea
2024-09-18 18:21 ` [PATCH 1/5] dt-bindings: dsp: fix power domain count Laurentiu Mihalcea
2024-09-18 18:49 ` Frank Li
2024-09-22 23:03 ` Laurentiu Mihalcea
2024-09-18 19:36 ` Rob Herring (Arm)
2024-09-18 20:37 ` Rob Herring
2024-09-18 18:21 ` Laurentiu Mihalcea [this message]
2024-09-18 19:02 ` [PATCH 2/5] arm64: dts: imx8qxp: configure dsp node for rproc usage Frank Li
2024-09-24 11:01 ` Daniel Baluta
2024-09-18 18:21 ` [PATCH 3/5] arm64: dts: imx8qm: drop dsp node from audio_subsys bus Laurentiu Mihalcea
2024-09-18 18:54 ` Frank Li
2024-09-18 18:21 ` [PATCH 4/5] arm64: dts: imx8qm: add node for VPU dsp Laurentiu Mihalcea
2024-09-18 18:57 ` Frank Li
2024-09-22 23:19 ` Laurentiu Mihalcea
2024-09-18 18:21 ` [PATCH 5/5] arm64: dts: imx8qm: enable dsp node for rproc usage Laurentiu Mihalcea
2024-09-18 19:00 ` Frank Li
2024-09-22 23:15 ` Laurentiu Mihalcea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240918182117.86221-3-laurentiumihalcea111@gmail.com \
--to=laurentiumihalcea111@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=iuliana.prodan@nxp.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).