[PATCH v2 0/3] X1E Dell XPS 9345 support

[Aleksandrs Vinarskis <alex.vinarskis@gmail.com>]

Introduce support for the mentioned laptop.

Very similar to other X1E laptops, device tree was derived by analyzing dtsi of
existing models and ACPI tables of this laptop [1]. Most notable difference were
* TZ protected SPI19.
* Keyboard only working after suspend/resume sequence, will do a follow up patch
to i2c-hid.
* Lots of small deviations in LDOs voltages.

Successfully tested with Debian 12 and Gnome, although this required additional
patches, namely harcode GPU chipid, apply [2] and _revert_ [3] - same as in Abel
Vesa's branches. Without last two the boot process is terminated by TZ. Firmware
for GPU/aDSP/cDSP was extracted from Windows, WiFi firmware from upstream
linux-firmware.

Quite a few things alraedy work, details in patches, quite a few still in WIP or
TODOs. Since fixing these may take me a while due to lack of documentation,
sending current progress as its very much usable.

[1] https://github.com/aarch64-laptops/build/blob/master/misc/dell-xps-9345/acpi/DSDT.dsl
[2] https://lore.kernel.org/all/20240830-x1e80100-bypass-pdc-v1-1-d4c00be0c3e3@linaro.org/
[3] https://lore.kernel.org/all/20240708-x1e80100-pd-mapper-v1-1-854386af4cf5@linaro.org/

--------

Changes to V1:
* Fix misalignments due to wrong tab/space conversion
* Fix regulator namings
* Fix reasonable warnings from `scripts/checkpatch.pl`
* Restructure all (sub)nodes alphabetically


Aleksandrs Vinarskis (3):
  dt-bindings: arm: qcom: Add Dell XPS 13 9345
  firmware: qcom: scm: Allow QSEECOM on Dell XPS 13 9345
  arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../dts/qcom/x1e80100-dell-tributo-13.dts     | 860 ++++++++++++++++++
 drivers/firmware/qcom/qcom_scm.c              |   1 +
 4 files changed, 863 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-tributo-13.dts

-- 
2.43.0