[PATCH v3 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576

[Frank Wang <frawang.cn@gmail.com>]

From: William Wu <william.wu@rock-chips.com>

The RK3576 SoC has two independent USB2.0 PHYs, and each PHY has
one port.

This change also converts the clock management from single to bulk
as some Rockchip SoCs (e.g RK3576) have more than one clock.

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
---
Changelog:
v3:
 - amend the commit log adds clocks converting.
 - retrieve the clock by "clks.id" in *_clk480m_register() function.

v2:
 - no changes.
v1:
 - https://patchwork.kernel.org/project/linux-phy/patch/20240923025326.10467-2-frank.wang@rock-chips.com/

 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 139 +++++++++++++++++-
 1 file changed, 131 insertions(+), 8 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 4f71373ae6e1..642c7857c5ae 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -229,9 +229,10 @@ struct rockchip_usb2phy_port {
  * @dev: pointer to device.
  * @grf: General Register Files regmap.
  * @usbgrf: USB General Register Files regmap.
- * @clk: clock struct of phy input clk.
+ * @clks: array of phy input clocks.
  * @clk480m: clock struct of phy output clk.
  * @clk480m_hw: clock struct of phy output clk management.
+ * @num_clks: number of phy input clocks.
  * @phy_reset: phy reset control.
  * @chg_state: states involved in USB charger detection.
  * @chg_type: USB charger types.
@@ -246,9 +247,10 @@ struct rockchip_usb2phy {
 	struct device	*dev;
 	struct regmap	*grf;
 	struct regmap	*usbgrf;
-	struct clk	*clk;
+	struct clk_bulk_data	*clks;
 	struct clk	*clk480m;
 	struct clk_hw	clk480m_hw;
+	int			num_clks;
 	struct reset_control	*phy_reset;
 	enum usb_chg_state	chg_state;
 	enum power_supply_type	chg_type;
@@ -376,7 +378,9 @@ rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
 {
 	struct device_node *node = rphy->dev->of_node;
 	struct clk_init_data init;
+	struct clk *refclk = NULL;
 	const char *clk_name;
+	int i;
 	int ret = 0;
 
 	init.flags = 0;
@@ -386,8 +390,15 @@ rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
 	/* optional override of the clockname */
 	of_property_read_string(node, "clock-output-names", &init.name);
 
-	if (rphy->clk) {
-		clk_name = __clk_get_name(rphy->clk);
+	for (i = 0; i < rphy->num_clks; i++) {
+		if (!strncmp(rphy->clks[i].id, "phyclk", 6)) {
+			refclk = rphy->clks[i].clk;
+			break;
+		}
+	}
+
+	if (!IS_ERR(refclk)) {
+		clk_name = __clk_get_name(refclk);
 		init.parent_names = &clk_name;
 		init.num_parents = 1;
 	} else {
@@ -1406,22 +1417,29 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 	if (IS_ERR(rphy->phy_reset))
 		return PTR_ERR(rphy->phy_reset);
 
-	rphy->clk = devm_clk_get_optional_enabled(dev, "phyclk");
-	if (IS_ERR(rphy->clk)) {
-		return dev_err_probe(&pdev->dev, PTR_ERR(rphy->clk),
+	ret = devm_clk_bulk_get_all(dev, &rphy->clks);
+	if (ret == -EPROBE_DEFER) {
+		return dev_err_probe(&pdev->dev, -EPROBE_DEFER,
 				     "failed to get phyclk\n");
 	}
 
+	/* Clocks are optional */
+	rphy->num_clks = ret < 0 ? 0 : ret;
+
 	ret = rockchip_usb2phy_clk480m_register(rphy);
 	if (ret) {
 		dev_err(dev, "failed to register 480m output clock\n");
 		return ret;
 	}
 
+	ret = clk_bulk_prepare_enable(rphy->num_clks, rphy->clks);
+	if (ret)
+		return ret;
+
 	if (rphy->phy_cfg->phy_tuning) {
 		ret = rphy->phy_cfg->phy_tuning(rphy);
 		if (ret)
-			return ret;
+			goto disable_clks;
 	}
 
 	index = 0;
@@ -1484,6 +1502,8 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 
 put_child:
 	of_node_put(child_np);
+disable_clks:
+	clk_bulk_disable_unprepare(rphy->num_clks, rphy->clks);
 	return ret;
 }
 
@@ -1495,6 +1515,30 @@ static int rk3128_usb2phy_tuning(struct rockchip_usb2phy *rphy)
 				BIT(2) << BIT_WRITEABLE_SHIFT | 0);
 }
 
+static int rk3576_usb2phy_tuning(struct rockchip_usb2phy *rphy)
+{
+	int ret;
+	u32 reg = rphy->phy_cfg->reg;
+
+	/* Deassert SIDDQ to power on analog block */
+	ret = regmap_write(rphy->grf, reg + 0x0010, GENMASK(29, 29) | 0x0000);
+	if (ret)
+		return ret;
+
+	/* Do reset after exit IDDQ mode */
+	ret = rockchip_usb2phy_reset(rphy);
+	if (ret)
+		return ret;
+
+	/* HS DC Voltage Level Adjustment 4'b1001 : +5.89% */
+	ret |= regmap_write(rphy->grf, reg + 0x000c, GENMASK(27, 24) | 0x0900);
+
+	/* HS Transmitter Pre-Emphasis Current Control 2'b10 : 2x */
+	ret |= regmap_write(rphy->grf, reg + 0x0010, GENMASK(20, 19) | 0x0010);
+
+	return ret;
+}
+
 static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
 {
 	int ret;
@@ -1923,6 +1967,84 @@ static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3576_phy_cfgs[] = {
+	{
+		.reg = 0x0,
+		.num_ports	= 1,
+		.phy_tuning	= rk3576_usb2phy_tuning,
+		.clkout_ctl	= { 0x0008, 0, 0, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x00c0, 1, 1, 0, 1 },
+				.bvalid_det_st	= { 0x00c4, 1, 1, 0, 1 },
+				.bvalid_det_clr = { 0x00c8, 1, 1, 0, 1 },
+				.ls_det_en	= { 0x00c0, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x00c4, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x00c8, 0, 0, 0, 1 },
+				.disfall_en	= { 0x00c0, 6, 6, 0, 1 },
+				.disfall_st	= { 0x00c4, 6, 6, 0, 1 },
+				.disfall_clr	= { 0x00c8, 6, 6, 0, 1 },
+				.disrise_en	= { 0x00c0, 5, 5, 0, 1 },
+				.disrise_st	= { 0x00c4, 5, 5, 0, 1 },
+				.disrise_clr	= { 0x00c8, 5, 5, 0, 1 },
+				.utmi_avalid	= { 0x0080, 1, 1, 0, 1 },
+				.utmi_bvalid	= { 0x0080, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x0080, 5, 4, 0, 1 },
+			}
+		},
+		.chg_det = {
+			.cp_det		= { 0x0080, 8, 8, 0, 1 },
+			.dcp_det	= { 0x0080, 8, 8, 0, 1 },
+			.dp_det		= { 0x0080, 9, 9, 1, 0 },
+			.idm_sink_en	= { 0x0010, 5, 5, 1, 0 },
+			.idp_sink_en	= { 0x0010, 5, 5, 0, 1 },
+			.idp_src_en	= { 0x0010, 14, 14, 0, 1 },
+			.rdm_pdwn_en	= { 0x0010, 14, 14, 0, 1 },
+			.vdm_src_en	= { 0x0010, 7, 6, 0, 3 },
+			.vdp_src_en	= { 0x0010, 7, 6, 0, 3 },
+		},
+	},
+	{
+		.reg = 0x2000,
+		.num_ports	= 1,
+		.phy_tuning	= rk3576_usb2phy_tuning,
+		.clkout_ctl	= { 0x2008, 0, 0, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x2000, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x20c0, 1, 1, 0, 1 },
+				.bvalid_det_st	= { 0x20c4, 1, 1, 0, 1 },
+				.bvalid_det_clr = { 0x20c8, 1, 1, 0, 1 },
+				.ls_det_en	= { 0x20c0, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x20c4, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x20c8, 0, 0, 0, 1 },
+				.disfall_en	= { 0x20c0, 6, 6, 0, 1 },
+				.disfall_st	= { 0x20c4, 6, 6, 0, 1 },
+				.disfall_clr	= { 0x20c8, 6, 6, 0, 1 },
+				.disrise_en	= { 0x20c0, 5, 5, 0, 1 },
+				.disrise_st	= { 0x20c4, 5, 5, 0, 1 },
+				.disrise_clr	= { 0x20c8, 5, 5, 0, 1 },
+				.utmi_avalid	= { 0x2080, 1, 1, 0, 1 },
+				.utmi_bvalid	= { 0x2080, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x2080, 5, 4, 0, 1 },
+			}
+		},
+		.chg_det = {
+			.cp_det		= { 0x2080, 8, 8, 0, 1 },
+			.dcp_det	= { 0x2080, 8, 8, 0, 1 },
+			.dp_det		= { 0x2080, 9, 9, 1, 0 },
+			.idm_sink_en	= { 0x2010, 5, 5, 1, 0 },
+			.idp_sink_en	= { 0x2010, 5, 5, 0, 1 },
+			.idp_src_en	= { 0x2010, 14, 14, 0, 1 },
+			.rdm_pdwn_en	= { 0x2010, 14, 14, 0, 1 },
+			.vdm_src_en	= { 0x2010, 7, 6, 0, 3 },
+			.vdp_src_en	= { 0x2010, 7, 6, 0, 3 },
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
 	{
 		.reg = 0x0000,
@@ -2094,6 +2216,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
 	{ .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
+	{ .compatible = "rockchip,rk3576-usb2phy", .data = &rk3576_phy_cfgs },
 	{ .compatible = "rockchip,rk3588-usb2phy", .data = &rk3588_phy_cfgs },
 	{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
 	{}
-- 
2.34.1