[PATCH v2 4/5] arm64: dts: mt8195: Fix dtbs_check error for mutex node

[Macpaul Lin <macpaul.lin@mediatek.com>]

The mutex node in mt8195.dtsi was triggering a dtbs_check error:
  mutex@1c101000: 'clock-names', 'reg-names' do not match any of the
                  regexes: 'pinctrl-[0-9]+'

This seems no need by inspecting the DT schemas and other reference boards,
so drop 'clock-names' and 'reg-names' in mt8195.dtsi.

Fixes: 92d2c23dc269 ("arm64: dts: mt8195: add display node for vdosys1")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 2 --
 1 file changed, 2 deletions(-)

Changes for v2:
 - No change.

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 2e1b41359b43..ade685ed2190 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -3331,11 +3331,9 @@ &larb19 &larb21 &larb24 &larb25
 		mutex1: mutex@1c101000 {
 			compatible = "mediatek,mt8195-disp-mutex";
 			reg = <0 0x1c101000 0 0x1000>;
-			reg-names = "vdo1_mutex";
 			interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
-			clock-names = "vdo1_mutex";
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
 		};
-- 
2.45.2