[PATCH 0/3] arm64: dts: renesas: Add SD/OE pin properties (part B)

[PATCH 0/3] arm64: dts: renesas: Add SD/OE pin properties (part B)

[Sean Anderson]

Linux can configure almost every part of this clock generator without
relying on the OTP settings. However, the correct configuration for the
SD/OE pin cannot be determined automatically. Therefore, add the
appropriate properties to configure this pin.

Thanks to everyone who replied to part A with board info!


Sean Anderson (3):
  arm64: dts: renesas: salvator-x: Add SD/OE pin properties
  arm64: dts: renesas: hihope: Add SD/OE pin properties
  arm64: dts: renesas: beacon: Add SD/OE pin properties

 arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi | 2 ++
 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi       | 2 ++
 arch/arm64/boot/dts/renesas/hihope-common.dtsi            | 2 ++
 arch/arm64/boot/dts/renesas/salvator-x.dtsi               | 2 ++
 4 files changed, 8 insertions(+)

-- 
2.35.1.1320.gc452695387.dirty

[PATCH 1/3] arm64: dts: renesas: salvator-x: Add SD/OE pin properties

[Sean Anderson]

Add SD/OE pin properties to the devicetree so that Linux can configure
the pin without relying on the OTP. This matches the register
configuration reported by Geert [1] as well as his analysis of the
schematic.

[1] https://lore.kernel.org/linux-arm-kernel/CAMuHMdUmf=BYrVWGDp4kjLGK=66HSMJbHuMvne-xGLkTYnGv2g@mail.gmail.com/

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

 arch/arm64/boot/dts/renesas/salvator-x.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
index ddee50e64632..5920932cbc2f 100644
--- a/arch/arm64/boot/dts/renesas/salvator-x.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
@@ -25,5 +25,7 @@ versaclock5: clock-generator@6a {
 		#clock-cells = <1>;
 		clocks = <&x23_clk>;
 		clock-names = "xin";
+		idt,shutdown = <0>;
+		idt,output-enable-active = <1>;
 	};
 };
-- 
2.35.1.1320.gc452695387.dirty

[PATCH 2/3] arm64: dts: renesas: hihope: Add SD/OE pin properties

[Sean Anderson]

Add SD/OE pin properties to the devicetree so that Linux can configure
the pin without relying on the OTP. This is based on Geert's analysis of
the schematic [1].

[1] https://lore.kernel.org/linux-arm-kernel/CAMuHMdUmf=BYrVWGDp4kjLGK=66HSMJbHuMvne-xGLkTYnGv2g@mail.gmail.com/

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

 arch/arm64/boot/dts/renesas/hihope-common.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 83104af2813e..6abe094fc253 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -198,6 +198,8 @@ versaclock5: clock-generator@6a {
 		#clock-cells = <1>;
 		clocks = <&x304_clk>;
 		clock-names = "xin";
+		idt,shutdown = <0>;
+		idt,output-enable-active = <1>;
 	};
 };
 
-- 
2.35.1.1320.gc452695387.dirty

[PATCH 3/3] arm64: dts: renesas: beacon: Add SD/OE pin properties

[Sean Anderson]

Add SD/OE pin properties to the devicetree so that Linux can configure
the pin without relying on the OTP. This matches the register
configuration reported by Adam [1] as well as his analysis of the
schematic.

[1] https://lore.kernel.org/linux-arm-kernel/CAHCN7x+tcvih1-kmUs8tVLCAk0Gnj11t0yEZLPWk3UBNyad7Jg@mail.gmail.com/

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

 arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi | 2 ++
 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi       | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 5a14f116f7a1..a258ba0d6b4f 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -364,6 +364,8 @@ versaclock6_bb: clock-controller@6a {
 		#clock-cells = <1>;
 		clocks = <&x304_clk>;
 		clock-names = "xin";
+		idt,shutdown = <0>;
+		idt,output-enable-active = <0>;
 
 		assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>,
 				  <&versaclock6_bb 3>, <&versaclock6_bb 4>;
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 68b04e56ae56..06ad9db420d6 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -166,6 +166,8 @@ versaclock5: versaclock_som@6a {
 		#clock-cells = <1>;
 		clocks = <&x304_clk>;
 		clock-names = "xin";
+		idt,shutdown = <0>;
+		idt,output-enable-active = <0>;
 		/* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */
 		assigned-clocks = <&versaclock5 1>,
 				   <&versaclock5 2>,
-- 
2.35.1.1320.gc452695387.dirty

Re: [PATCH 1/3] arm64: dts: renesas: salvator-x: Add SD/OE pin properties

[Geert Uytterhoeven]

On Fri, Sep 27, 2024 at 10:13 PM Sean Anderson <sean.anderson@linux.dev> wrote:
> Add SD/OE pin properties to the devicetree so that Linux can configure
> the pin without relying on the OTP. This matches the register
> configuration reported by Geert [1] as well as his analysis of the
> schematic.
>
> [1] https://lore.kernel.org/linux-arm-kernel/CAMuHMdUmf=BYrVWGDp4kjLGK=66HSMJbHuMvne-xGLkTYnGv2g@mail.gmail.com/
>
> Signed-off-by: Sean Anderson <sean.anderson@linux.dev>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.13.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 2/3] arm64: dts: renesas: hihope: Add SD/OE pin properties

[Geert Uytterhoeven]

On Fri, Sep 27, 2024 at 10:13 PM Sean Anderson <sean.anderson@linux.dev> wrote:
> Add SD/OE pin properties to the devicetree so that Linux can configure
> the pin without relying on the OTP. This is based on Geert's analysis of
> the schematic [1].
>
> [1] https://lore.kernel.org/linux-arm-kernel/CAMuHMdUmf=BYrVWGDp4kjLGK=66HSMJbHuMvne-xGLkTYnGv2g@mail.gmail.com/
>
> Signed-off-by: Sean Anderson <sean.anderson@linux.dev>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.13.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 3/3] arm64: dts: renesas: beacon: Add SD/OE pin properties

[Geert Uytterhoeven]

On Fri, Sep 27, 2024 at 10:13 PM Sean Anderson <sean.anderson@linux.dev> wrote:
> Add SD/OE pin properties to the devicetree so that Linux can configure
> the pin without relying on the OTP. This matches the register
> configuration reported by Adam [1] as well as his analysis of the
> schematic.
>
> [1] https://lore.kernel.org/linux-arm-kernel/CAHCN7x+tcvih1-kmUs8tVLCAk0Gnj11t0yEZLPWk3UBNyad7Jg@mail.gmail.com/
>
> Signed-off-by: Sean Anderson <sean.anderson@linux.dev>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.13.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds