[PATCH 3/3] arm64: dts: renesas: beacon: Add SD/OE pin properties

[Sean Anderson <sean.anderson@linux.dev>]

Add SD/OE pin properties to the devicetree so that Linux can configure
the pin without relying on the OTP. This matches the register
configuration reported by Adam [1] as well as his analysis of the
schematic.

[1] https://lore.kernel.org/linux-arm-kernel/CAHCN7x+tcvih1-kmUs8tVLCAk0Gnj11t0yEZLPWk3UBNyad7Jg@mail.gmail.com/

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

 arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi | 2 ++
 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi       | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 5a14f116f7a1..a258ba0d6b4f 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -364,6 +364,8 @@ versaclock6_bb: clock-controller@6a {
 		#clock-cells = <1>;
 		clocks = <&x304_clk>;
 		clock-names = "xin";
+		idt,shutdown = <0>;
+		idt,output-enable-active = <0>;
 
 		assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>,
 				  <&versaclock6_bb 3>, <&versaclock6_bb 4>;
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 68b04e56ae56..06ad9db420d6 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -166,6 +166,8 @@ versaclock5: versaclock_som@6a {
 		#clock-cells = <1>;
 		clocks = <&x304_clk>;
 		clock-names = "xin";
+		idt,shutdown = <0>;
+		idt,output-enable-active = <0>;
 		/* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */
 		assigned-clocks = <&versaclock5 1>,
 				   <&versaclock5 2>,
-- 
2.35.1.1320.gc452695387.dirty