From: Rob Herring <robh@kernel.org>
To: Michal Wilczynski <m.wilczynski@samsung.com>
Cc: drew@pdp7.com, guoren@kernel.org, wefu@redhat.com,
jassisinghbrar@gmail.com, krzk+dt@kernel.org,
conor+dt@kernel.org, paul.walmsley@sifive.com,
palmer@dabbelt.com, aou@eecs.berkeley.edu,
m.szyprowski@samsung.com, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH RFC v2 2/3] dt-bindings: mailbox: Add thead,th1520-mailbox bindings
Date: Fri, 27 Sep 2024 17:32:27 -0500 [thread overview]
Message-ID: <20240927223227.GA152909-robh@kernel.org> (raw)
In-Reply-To: <20240927094207.1650085-3-m.wilczynski@samsung.com>
On Fri, Sep 27, 2024 at 11:42:06AM +0200, Michal Wilczynski wrote:
> Add bindings for the mailbox controller. This work is based on the vendor
> kernel. [1]
>
> Link: https://github.com/revyos/thead-kernel.git [1]
>
> Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
> ---
> .../bindings/mailbox/thead,th1520-mbox.yaml | 84 +++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 85 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml
>
> diff --git a/Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml b/Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml
> new file mode 100644
> index 000000000000..b517d0c6eb12
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml
> @@ -0,0 +1,84 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mailbox/thead,th1520-mbox.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: T-head TH1520 Mailbox Controller
> +
> +description:
> + The T-head mailbox controller enables communication and coordination between
> + cores within the SoC by passing messages (e.g., data, status, and control)
> + through mailbox channels. It also allows one core to signal another processor
> + using interrupts via the Interrupt Controller Unit (ICU).
> +
> +maintainers:
> + - Michal Wilczynski <m.wilczynski@samsung.com>
> +
> +properties:
> + compatible:
> + const: thead,th1520-mbox
> +
> + reg:
> + items:
> + - description: Mailbox local base address
> + - description: Remote ICU 0 base address
> + - description: Remote ICU 1 base address
> + - description: Remote ICU 2 base address
> +
> + reg-names:
> + items:
> + - const: local
> + - const: remote-icu0
> + - const: remote-icu1
> + - const: remote-icu2
> +
> + interrupts:
> + maxItems: 1
> +
> + thead,icu-cpu-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
Don't need '|' if no formatting.
> + CPU ID associated with the Interrupt Controller Unit (ICU). This ID should
> + correspond to a valid CPU core in the system. The value must be between 0
> + and (N - 1), where N is the total number of CPU cores in the SoC.
> + minimum: 0
> + maximum: 3
The normal way we associate a node with some subset of CPUs is the
'cpus' property linking to the CPU node.
Or is this CPUs which are not part of what Linux is running on (i.e. the
SMP cores).
> +
> + '#mbox-cells':
> + const: 2
> + description: |
> + Specifies the number of cells needed to encode the mailbox specifier.
> + The mailbox specifier consists of two cells:
> + - The first cell is the destination CPU ID.
> + - The second cell is the mailbox channel ID.
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - interrupts
> + - thead,icu-cpu-id
> + - '#mbox-cells'
> +
> +examples:
> + - |
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + mailbox@ffffc38000 {
> + compatible = "thead,th1520-mbox";
> + reg = <0xff 0xffc38000 0x0 0x4000>,
> + <0xff 0xffc44000 0x0 0x1000>,
> + <0xff 0xffc4c000 0x0 0x1000>,
> + <0xff 0xffc54000 0x0 0x1000>;
> + reg-names = "local", "remote-icu0", "remote-icu1", "remote-icu2";
> + interrupts = <28>;
> + thead,icu-cpu-id = <0>;
> + #mbox-cells = <2>;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index df4d7be6cf35..a6028f850a25 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19943,6 +19943,7 @@ L: linux-riscv@lists.infradead.org
> S: Maintained
> T: git https://github.com/pdp7/linux.git
> F: Documentation/devicetree/bindings/clock/thead,th1520-clk-ap.yaml
> +F: Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml
> F: arch/riscv/boot/dts/thead/
> F: drivers/clk/thead/clk-th1520-ap.c
> F: drivers/mailbox/mailbox-th1520.c
> --
> 2.34.1
>
next prev parent reply other threads:[~2024-09-27 22:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20240927094213eucas1p22449c12701e67bc29371a6a6cb6f72a2@eucas1p2.samsung.com>
2024-09-27 9:42 ` [PATCH RFC v2 0/3] Introduce support for T-head TH1520 Mailbox Michal Wilczynski
[not found] ` <CGME20240927094214eucas1p272cf99b40344f501cbbfaa91c929c709@eucas1p2.samsung.com>
2024-09-27 9:42 ` [PATCH RFC v2 1/3] mailbox: Introduce support for T-head TH1520 Mailbox driver Michal Wilczynski
2024-09-28 8:00 ` Krzysztof Kozlowski
[not found] ` <CGME20240927094215eucas1p1be4d58084ff19e47450dcad3e6da5f5e@eucas1p1.samsung.com>
2024-09-27 9:42 ` [PATCH RFC v2 2/3] dt-bindings: mailbox: Add thead,th1520-mailbox bindings Michal Wilczynski
2024-09-27 22:32 ` Rob Herring [this message]
2024-10-02 9:24 ` Michal Wilczynski
[not found] ` <CGME20240927094215eucas1p29ac564998ea7f9dbe8b5d908060c7c38@eucas1p2.samsung.com>
2024-09-27 9:42 ` [PATCH RFC v2 3/3] riscv: dts: thead: Add mailbox node Michal Wilczynski
2024-09-27 9:59 ` [PATCH RFC v2 0/3] Introduce support for T-head TH1520 Mailbox Michal Wilczynski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240927223227.GA152909-robh@kernel.org \
--to=robh@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=drew@pdp7.com \
--cc=guoren@kernel.org \
--cc=jassisinghbrar@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=m.szyprowski@samsung.com \
--cc=m.wilczynski@samsung.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=wefu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).