devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	imx@lists.linux.dev (open list:ARM/FREESCALE IMX / MXC ARM
	ARCHITECTURE),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
	linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH 4/6] arm64: dts: imx8qxp-mek: add flexcan1 and flexcan2
Date: Mon, 30 Sep 2024 17:26:01 -0400	[thread overview]
Message-ID: <20240930212604.118756-4-Frank.Li@nxp.com> (raw)
In-Reply-To: <20240930212604.118756-1-Frank.Li@nxp.com>

Add flexcan1 and flexcan2.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 505015f91c823..621ad618aee7b 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -57,6 +57,25 @@ reg_audio: regulator-audio {
 		regulator-name = "cs42888_supply";
 	};
 
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can-en";
+		gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can-stby";
+		gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
+
 	sound-bt-sco {
 		compatible = "simple-audio-card";
 		simple-audio-card,bitclock-inversion;
@@ -339,6 +358,20 @@ &cm40_intmux {
 	status = "okay";
 };
 
+&flexcan1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
 &jpegdec {
 	status = "okay";
 };
@@ -569,6 +602,20 @@ IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020
 		>;
 	};
 
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <
+			IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX			0x21
+			IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX			0x21
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <
+			IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX			0x21
+			IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX			0x21
+		>;
+	};
+
 	pinctrl_ioexp_rst: ioexprstgrp {
 		fsl,pins = <
 			IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01			0x06000021
-- 
2.34.1


  parent reply	other threads:[~2024-09-30 21:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-30 21:25 [PATCH 1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec Frank Li
2024-09-30 21:25 ` [PATCH 2/6] arm64: dts: imx8qxp-mek: add esai, cs42888 and related node Frank Li
2024-10-21  3:01   ` Shawn Guo
2024-09-30 21:26 ` [PATCH 3/6] arm64: dts: imx8qxp-mek: enable jpeg encode and deconde Frank Li
2024-09-30 21:26 ` Frank Li [this message]
2024-09-30 21:26 ` [PATCH 5/6] arm64: dts: imx8qxp-mek: add usbotg1 and related node Frank Li
2024-09-30 21:26 ` [PATCH 6/6] arm64: dts: imx8qxp-mek: add cm4 and related nodes Frank Li
2024-10-21  3:06   ` Shawn Guo
2024-10-02  3:51 ` [PATCH 1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec Rob Herring (Arm)
2024-10-18 19:39   ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240930212604.118756-4-Frank.Li@nxp.com \
    --to=frank.li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).