From: Richard Acayan <mailingradian@gmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Loic Poulain <loic.poulain@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Andi Shyti <andi.shyti@kernel.org>,
Todor Tomov <todor.too@gmail.com>,
"Bryan O'Donoghue" <bryan.odonoghue@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-media@vger.kernel.org
Cc: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
Richard Acayan <mailingradian@gmail.com>
Subject: [PATCH v5 5/7] media: qcom: camss: add support for SDM670 camss
Date: Mon, 30 Sep 2024 22:35:26 -0400 [thread overview]
Message-ID: <20241001023520.547271-14-mailingradian@gmail.com> (raw)
In-Reply-To: <20241001023520.547271-9-mailingradian@gmail.com>
The camera subsystem for the SDM670 the same as on SDM845 except with
3 CSIPHY ports instead of 4. Add support for the SDM670 camera
subsystem.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
---
drivers/media/platform/qcom/camss/camss.c | 191 ++++++++++++++++++++++
1 file changed, 191 insertions(+)
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index d64985ca6e88..4694f5219654 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -584,6 +584,185 @@ static const struct camss_subdev_resources vfe_res_660[] = {
}
};
+static const struct camss_subdev_resources csiphy_res_670[] = {
+ /* CSIPHY0 */
+ {
+ .regulators = {},
+ .clock = { "soc_ahb", "cpas_ahb",
+ "csiphy0", "csiphy0_timer" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 19200000, 240000000, 269333333 } },
+ .reg = { "csiphy0" },
+ .interrupt = { "csiphy0" },
+ .csiphy = {
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+
+ /* CSIPHY1 */
+ {
+ .regulators = {},
+ .clock = { "soc_ahb", "cpas_ahb",
+ "csiphy1", "csiphy1_timer" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 19200000, 240000000, 269333333 } },
+ .reg = { "csiphy1" },
+ .interrupt = { "csiphy1" },
+ .csiphy = {
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ },
+
+ /* CSIPHY2 */
+ {
+ .regulators = {},
+ .clock = { "soc_ahb", "cpas_ahb",
+ "csiphy2", "csiphy2_timer" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 19200000, 240000000, 269333333 } },
+ .reg = { "csiphy2" },
+ .interrupt = { "csiphy2" },
+ .csiphy = {
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ }
+ }
+};
+
+static const struct camss_subdev_resources csid_res_670[] = {
+ /* CSID0 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = { "cpas_ahb", "soc_ahb", "vfe0",
+ "vfe0_cphy_rx", "csi0" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 100000000, 320000000, 404000000, 480000000, 600000000 },
+ { 384000000 },
+ { 19200000, 75000000, 384000000, 538666667 } },
+ .reg = { "csid0" },
+ .interrupt = { "csid0" },
+ .csid = {
+ .hw_ops = &csid_ops_gen2,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .formats = &csid_formats_gen2
+ }
+ },
+
+ /* CSID1 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = { "cpas_ahb", "soc_ahb", "vfe1",
+ "vfe1_cphy_rx", "csi1" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 100000000, 320000000, 404000000, 480000000, 600000000 },
+ { 384000000 },
+ { 19200000, 75000000, 384000000, 538666667 } },
+ .reg = { "csid1" },
+ .interrupt = { "csid1" },
+ .csid = {
+ .hw_ops = &csid_ops_gen2,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .formats = &csid_formats_gen2
+ }
+ },
+
+ /* CSID2 */
+ {
+ .regulators = { "vdda-phy", "vdda-pll" },
+ .clock = { "cpas_ahb", "soc_ahb", "vfe_lite",
+ "vfe_lite_cphy_rx", "csi2" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 100000000, 320000000, 404000000, 480000000, 600000000 },
+ { 384000000 },
+ { 19200000, 75000000, 384000000, 538666667 } },
+ .reg = { "csid2" },
+ .interrupt = { "csid2" },
+ .csid = {
+ .is_lite = true,
+ .hw_ops = &csid_ops_gen2,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .formats = &csid_formats_gen2
+ }
+ }
+};
+
+static const struct camss_subdev_resources vfe_res_670[] = {
+ /* VFE0 */
+ {
+ .regulators = {},
+ .clock = { "camnoc_axi", "cpas_ahb", "soc_ahb",
+ "vfe0", "vfe0_axi" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 100000000, 320000000, 404000000, 480000000, 600000000 },
+ { 0 } },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" },
+ .vfe = {
+ .line_num = 4,
+ .has_pd = true,
+ .pd_name = "ife0",
+ .hw_ops = &vfe_ops_170,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+
+ /* VFE1 */
+ {
+ .regulators = {},
+ .clock = { "camnoc_axi", "cpas_ahb", "soc_ahb",
+ "vfe1", "vfe1_axi" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 100000000, 320000000, 404000000, 480000000, 600000000 },
+ { 0 } },
+ .reg = { "vfe1" },
+ .interrupt = { "vfe1" },
+ .vfe = {
+ .line_num = 4,
+ .has_pd = true,
+ .pd_name = "ife1",
+ .hw_ops = &vfe_ops_170,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+
+ /* VFE-lite */
+ {
+ .regulators = {},
+ .clock = { "camnoc_axi", "cpas_ahb", "soc_ahb",
+ "vfe_lite" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 100000000, 320000000, 404000000, 480000000, 600000000 } },
+ .reg = { "vfe_lite" },
+ .interrupt = { "vfe_lite" },
+ .vfe = {
+ .is_lite = true,
+ .line_num = 4,
+ .hw_ops = &vfe_ops_170,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ }
+};
+
static const struct camss_subdev_resources csiphy_res_845[] = {
/* CSIPHY0 */
{
@@ -2404,6 +2583,17 @@ static const struct camss_resources sdm660_resources = {
.link_entities = camss_link_entities
};
+static const struct camss_resources sdm670_resources = {
+ .version = CAMSS_845,
+ .csiphy_res = csiphy_res_670,
+ .csid_res = csid_res_670,
+ .vfe_res = vfe_res_670,
+ .csiphy_num = ARRAY_SIZE(csiphy_res_670),
+ .csid_num = ARRAY_SIZE(csid_res_670),
+ .vfe_num = ARRAY_SIZE(vfe_res_670),
+ .link_entities = camss_link_entities
+};
+
static const struct camss_resources sdm845_resources = {
.version = CAMSS_845,
.csiphy_res = csiphy_res_845,
@@ -2448,6 +2638,7 @@ static const struct of_device_id camss_dt_match[] = {
{ .compatible = "qcom,msm8916-camss", .data = &msm8916_resources },
{ .compatible = "qcom,msm8996-camss", .data = &msm8996_resources },
{ .compatible = "qcom,sdm660-camss", .data = &sdm660_resources },
+ { .compatible = "qcom,sdm670-camss", .data = &sdm670_resources },
{ .compatible = "qcom,sdm845-camss", .data = &sdm845_resources },
{ .compatible = "qcom,sm8250-camss", .data = &sm8250_resources },
{ .compatible = "qcom,sc8280xp-camss", .data = &sc8280xp_resources },
--
2.46.2
next prev parent reply other threads:[~2024-10-01 2:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-01 2:35 [PATCH v5 0/7] Add SDM670 camera subsystem Richard Acayan
2024-10-01 2:35 ` [PATCH v5 1/7] dt-bindings: clock: qcom,sdm845-camcc: add sdm670 compatible Richard Acayan
2024-10-01 2:35 ` [PATCH v5 2/7] dt-bindings: i2c: qcom-cci: Document SDM670 compatible Richard Acayan
2024-10-01 6:49 ` Krzysztof Kozlowski
2024-10-01 2:35 ` [PATCH v5 3/7] i2c: qcom-cci: Stop complaining about DT set clock rate Richard Acayan
2024-10-01 2:35 ` [PATCH v5 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss Richard Acayan
2024-10-01 6:53 ` Krzysztof Kozlowski
2024-10-01 9:09 ` Bryan O'Donoghue
2024-10-01 9:47 ` Krzysztof Kozlowski
2024-10-01 9:54 ` Bryan O'Donoghue
2024-10-01 10:03 ` Krzysztof Kozlowski
2024-10-01 2:35 ` Richard Acayan [this message]
2024-10-01 2:35 ` [PATCH v5 6/7] arm64: dts: qcom: sdm670: add camcc Richard Acayan
2024-10-01 2:35 ` [PATCH v5 7/7] arm64: dts: qcom: sdm670: add camss and cci Richard Acayan
2024-10-02 8:53 ` [PATCH v5 0/7] Add SDM670 camera subsystem Andi Shyti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241001023520.547271-14-mailingradian@gmail.com \
--to=mailingradian@gmail.com \
--cc=andersson@kernel.org \
--cc=andi.shyti@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=mchehab@kernel.org \
--cc=mturquette@baylibre.com \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=todor.too@gmail.com \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).