[PATCH 0/9] Add platform supports to MediaTek MT8188 SoC (part 2)

[PATCH 0/9] Add platform supports to MediaTek MT8188 SoC (part 2)

[Fei Shao]

Hi all,

This series is based on top of my previous "Add platform supports to
MediaTek MT8188 SoC" v3 series[*].

There's nothing to change or address in that series at the point of
writing, so I decided not to resend it and start this new "part 2"
series instead.
(if I need to update both series next time I might consider merging them
into one)

Specifically, this continues to introduce the following platform supports
in MediaTek MT8188 SoC to lay the groundwork for the board device trees:
- PCIe
- MIPI DSI panel
- video decoder and encoder
- JPEG decoder and encoder
- vdosys0 and vdosys1 display pipelines
- DP-INTF
- eDP and DP TX
- aliases

Please have a look and feedback are welcome, thanks.

[*]: https://lore.kernel.org/all/20240911143429.850071-1-fshao@chromium.org/

Regards,
Fei


Fei Shao (9):
  arm64: dts: mediatek: mt8188: Assign GCE aliases
  arm64: dts: mediatek: mt8188: Add PCIe nodes
  arm64: dts: mediatek: mt8188: Add MIPI DSI nodes
  arm64: dts: mediatek: mt8188: Add video decoder and encoder nodes
  arm64: dts: mediatek: mt8188: Add JPEG decoder and encoder nodes
  arm64: dts: mediatek: mt8188: Add display nodes for vdosys0
  arm64: dts: mediatek: mt8188: Add display nodes for vdosys1
  arm64: dts: mediatek: mt8188: Add DP-INTF nodes
  arm64: dts: mediatek: mt8188: Add eDP and DP TX nodes

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 641 +++++++++++++++++++++++
 1 file changed, 641 insertions(+)

-- 
2.46.1.824.gd892dcdcdd-goog

[PATCH 1/9] arm64: dts: mediatek: mt8188: Assign GCE aliases

[Fei Shao]

Create and assign aliases for the MediaTek GCE mailboxes.

Signed-off-by: Fei Shao <fshao@chromium.org>
---

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index bf15ac9901da..10195a4e4e9d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -23,6 +23,11 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gce0 = &gce0;
+		gce1 = &gce1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.46.1.824.gd892dcdcdd-goog

[PATCH 2/9] arm64: dts: mediatek: mt8188: Add PCIe nodes

[Fei Shao]

Add PCIe node and the associated PHY node.
Individual board device tree should enable the nodes as needed.

Signed-off-by: Fei Shao <fshao@chromium.org>
---

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 62 ++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index 10195a4e4e9d..9431f3c5c228 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -1763,6 +1763,53 @@ xhci0: usb@112b0000 {
 			status = "disabled";
 		};
 
+		pcie: pcie@112f0000 {
+			compatible = "mediatek,mt8188-pcie", "mediatek,mt8192-pcie";
+			reg = <0 0x112f0000 0 0x2000>;
+			reg-names = "pcie-mac";
+			ranges = <0x82000000 0 0x20000000 0 0x20000000 0 0x4000000>;
+			bus-range = <0 0xff>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P0>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_26M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_32K>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_FMEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m", "tl_32k",
+				      "peri_26m", "peri_mem";
+
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			interrupt-map-mask = <0 0 0 7>;
+
+			iommu-map = <0 &infra_iommu IFR_IOMMU_PORT_PCIE_0 0xffff>;
+			iommu-map-mask = <0>;
+
+			phys = <&pcieport PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+
+			power-domains = <&spm MT8188_POWER_DOMAIN_PEXTP_MAC_P0>;
+
+			resets = <&watchdog MT8188_TOPRGU_PCIE_SW_RST>;
+			reset-names = "mac";
+
+			status = "disabled";
+
+			pcie_intc: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
 		nor_flash: spi@1132c000 {
 			compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor";
 			reg = <0 0x1132c000 0 0x1000>;
@@ -1775,6 +1822,21 @@ nor_flash: spi@1132c000 {
 			status = "disabled";
 		};
 
+		pciephy: t-phy@11c20700 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			ranges = <0 0 0x11c20700 0x700>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			pcieport: pcie-phy@0 {
+				reg = <0 0x700>;
+				clocks = <&topckgen CLK_TOP_CFGREG_F_PCIE_PHY_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
 		i2c1: i2c@11e00000 {
 			compatible = "mediatek,mt8188-i2c";
 			reg = <0 0x11e00000 0 0x1000>,
-- 
2.46.1.824.gd892dcdcdd-goog

Re: [PATCH 2/9] arm64: dts: mediatek: mt8188: Add PCIe nodes

[Macpaul Lin]

On 10/2/24 19:41, Fei Shao wrote:
> 	
> 
> External email : Please do not click links or open attachments until you 
> have verified the sender or the content.
> 
> 
> Add PCIe node and the associated PHY node.
> Individual board device tree should enable the nodes as needed.
> 
> Signed-off-by: Fei Shao <fshao@chromium.org>
> ---
> 
>   arch/arm64/boot/dts/mediatek/mt8188.dtsi | 62 ++++++++++++++++++++++++
>   1 file changed, 62 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> index 10195a4e4e9d..9431f3c5c228 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> @@ -1763,6 +1763,53 @@ xhci0: usb@112b0000 {
>   			status = "disabled";
>   		};
>   
> +		pcie: pcie@112f0000 {
> +			compatible = "mediatek,mt8188-pcie", "mediatek,mt8192-pcie";
> +			reg = <0 0x112f0000 0 0x2000>;
> +			reg-names = "pcie-mac";

It seems the property 'linux,pci-domain = <0>;' is missing?

[snip]

> +			};
> +		};
> +
>   		nor_flash: spi@1132c000 {
>   			compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor";
>   			reg = <0 0x1132c000 0 0x1000>;
> @@ -1775,6 +1822,21 @@ nor_flash: spi@1132c000 {
>   			status = "disabled";
>   		};
>   
> +		pciephy: t-phy@11c20700 {
> +			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
> +			ranges = <0 0 0x11c20700 0x700>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			status = "disabled";
> +

The power-domains property is missing.
It should be 'power-domains = <&spm MT8188_POWER_DOMAIN_PEXTP_PHY_TOP>;'

> +			pcieport: pcie-phy@0 {
> +				reg = <0 0x700>;
> +				clocks = <&topckgen CLK_TOP_CFGREG_F_PCIE_PHY_REF>;
> +				clock-names = "ref";
> +				#phy-cells = <1>;
> +			};
> +		};
> +
>   		i2c1: i2c@11e00000 {
>   			compatible = "mediatek,mt8188-i2c";
>   			reg = <0 0x11e00000 0 0x1000>,

Thanks!
Best regards,
Macpaul Lin

Re: [PATCH 2/9] arm64: dts: mediatek: mt8188: Add PCIe nodes

[Fei Shao]

On Wed, Oct 2, 2024 at 8:42 PM Macpaul Lin <macpaul.lin@mediatek.com> wrote:
>
>
>
> On 10/2/24 19:41, Fei Shao wrote:
> >
> >
> > External email : Please do not click links or open attachments until you
> > have verified the sender or the content.
> >
> >
> > Add PCIe node and the associated PHY node.
> > Individual board device tree should enable the nodes as needed.
> >
> > Signed-off-by: Fei Shao <fshao@chromium.org>
> > ---
> >
> >   arch/arm64/boot/dts/mediatek/mt8188.dtsi | 62 ++++++++++++++++++++++++
> >   1 file changed, 62 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > index 10195a4e4e9d..9431f3c5c228 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> > @@ -1763,6 +1763,53 @@ xhci0: usb@112b0000 {
> >                       status = "disabled";
> >               };
> >
> > +             pcie: pcie@112f0000 {
> > +                     compatible = "mediatek,mt8188-pcie", "mediatek,mt8192-pcie";
> > +                     reg = <0 0x112f0000 0 0x2000>;
> > +                     reg-names = "pcie-mac";
>
> It seems the property 'linux,pci-domain = <0>;' is missing?

I'll add that. I guess the fallback will assign a dynamic ID to it
(likely also 0), but explicitly having a static domain ID is never a
bad thing.

>
> [snip]
>
> > +                     };
> > +             };
> > +
> >               nor_flash: spi@1132c000 {
> >                       compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor";
> >                       reg = <0 0x1132c000 0 0x1000>;
> > @@ -1775,6 +1822,21 @@ nor_flash: spi@1132c000 {
> >                       status = "disabled";
> >               };
> >
> > +             pciephy: t-phy@11c20700 {
> > +                     compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
> > +                     ranges = <0 0 0x11c20700 0x700>;
> > +                     #address-cells = <1>;
> > +                     #size-cells = <1>;
> > +                     status = "disabled";
> > +
>
> The power-domains property is missing.
> It should be 'power-domains = <&spm MT8188_POWER_DOMAIN_PEXTP_PHY_TOP>;'

I dropped this as the binding check was against it, and I thought it
was a mistake because other tphy nodes don't seem to have a power
domain either.
And now I noticed your tphy binding patch in [1] so that explains,
except that I still can't tell whether there should be a power domain
for a given tphy node...

Anyway, I'll fix this one. Thanks!

[1]: https://lore.kernel.org/all/20240926101804.22471-1-macpaul.lin@mediatek.com/

Regards,
Fei


>
> > +                     pcieport: pcie-phy@0 {
> > +                             reg = <0 0x700>;
> > +                             clocks = <&topckgen CLK_TOP_CFGREG_F_PCIE_PHY_REF>;
> > +                             clock-names = "ref";
> > +                             #phy-cells = <1>;
> > +                     };
> > +             };
> > +
> >               i2c1: i2c@11e00000 {
> >                       compatible = "mediatek,mt8188-i2c";
> >                       reg = <0 0x11e00000 0 0x1000>,
>
> Thanks!
> Best regards,
> Macpaul Lin

[PATCH 3/9] arm64: dts: mediatek: mt8188: Add MIPI DSI nodes

[Fei Shao]

Add MIPI DSI and the associated PHY node to support DSI panels.
Individual board device tree should enable the nodes as needed.

Signed-off-by: Fei Shao <fshao@chromium.org>
---

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index 9431f3c5c228..ff639418bebe 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -1837,6 +1837,16 @@ pcieport: pcie-phy@0 {
 			};
 		};
 
+		mipi_tx_phy: dsi-phy@11c80000 {
+			compatible = "mediatek,mt8188-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c80000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c1: i2c@11e00000 {
 			compatible = "mediatek,mt8188-i2c";
 			reg = <0 0x11e00000 0 0x1000>,
@@ -2222,10 +2232,26 @@ larb19: smi@1a010000 {
 			mediatek,smi = <&vdo_smi_common>;
 		};
 
+		disp_dsi: dsi@1c008000 {
+			compatible = "mediatek,mt8188-dsi";
+			reg = <0 0x1c008000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DSI0>,
+				 <&vdosys0 CLK_VDO0_DSI0_DSI>,
+				 <&mipi_tx_phy>;
+			clock-names = "engine", "digital", "hs";
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&mipi_tx_phy>;
+			phy-names = "dphy";
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			resets = <&vdosys0 MT8188_VDO0_RST_DSI0>;
+			status = "disabled";
+		};
+
 		vdosys0: syscon@1c01d000 {
 			compatible = "mediatek,mt8188-vdosys0", "syscon";
 			reg = <0 0x1c01d000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xd000 0x1000>;
 		};
-- 
2.46.1.824.gd892dcdcdd-goog

[PATCH 4/9] arm64: dts: mediatek: mt8188: Add video decoder and encoder nodes

[Fei Shao]

Add video decoder and encoder nodes for hardware-accelerated video
decoding and encoding support.

Signed-off-by: Fei Shao <fshao@chromium.org>
---

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 83 ++++++++++++++++++++++++
 1 file changed, 83 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index ff639418bebe..dbea562ee8ba 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -2181,6 +2181,64 @@ ccusys: clock-controller@17200000 {
 			#clock-cells = <1>;
 		};
 
+		video_decoder: video-decoder@18000000 {
+			compatible = "mediatek,mt8188-vcodec-dec";
+			reg = <0 0x18000000 0 0x1000>, <0 0x18004000 0 0x1000>;
+			ranges = <0 0 0 0x18000000 0 0x26000>;
+			iommus = <&vpp_iommu M4U_PORT_L23_HW_VDEC_UFO_ENC_EXT>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			mediatek,scp = <&scp>;
+
+			video-codec@10000 {
+				compatible = "mediatek,mtk-vcodec-lat";
+				reg = <0 0x10000 0 0x800>;
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys_soc CLK_VDEC1_SOC_VDEC>,
+					 <&vdecsys_soc CLK_VDEC1_SOC_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D6>;
+				clock-names = "sel", "vdec", "lat", "top";
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_VLD_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_VLD2_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_AVC_MV_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_PRED_RD_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_TILE_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_LAT0_WDMA_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_UFO_ENC_EXT>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_UFO_ENC_EXT_C>,
+					 <&vpp_iommu M4U_PORT_L23_HW_VDEC_MC_EXT_C>;
+				power-domains = <&spm MT8188_POWER_DOMAIN_VDEC0>;
+			};
+
+			video-codec@25000 {
+				compatible = "mediatek,mtk-vcodec-core";
+				reg = <0 0x25000 0 0x1000>;
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys CLK_VDEC2_VDEC>,
+					 <&vdecsys CLK_VDEC2_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D6>;
+				clock-names = "sel", "vdec", "lat", "top";
+				interrupts = <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&vdo_iommu M4U_PORT_L21_HW_VDEC_MC_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_UFO_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_PP_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_PRED_RD_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_PRED_WR_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_PPWRAP_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_TILE_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_VLD_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_VLD2_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_AVC_MV_EXT>,
+					 <&vdo_iommu M4U_PORT_L21_HW_VDEC_UFO_EXT_C>;
+				power-domains = <&spm MT8188_POWER_DOMAIN_VDEC1>;
+			};
+		};
+
 		larb23: smi@1800d000 {
 			compatible = "mediatek,mt8188-smi-larb";
 			reg = <0 0x1800d000 0 0x1000>;
@@ -2232,6 +2290,31 @@ larb19: smi@1a010000 {
 			mediatek,smi = <&vdo_smi_common>;
 		};
 
+		video_encoder: video-encoder@1a020000 {
+			compatible = "mediatek,mt8188-vcodec-enc";
+			reg = <0 0x1a020000 0 0x10000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			assigned-clocks = <&topckgen CLK_TOP_VENC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+			clocks = <&vencsys CLK_VENC1_VENC>;
+			clock-names = "venc_sel";
+			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L19_VENC_RCPU>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_REC>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_BSDMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_SV_COMV>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_RD_COMV>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_CUR_LUMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_CUR_CHROMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_REF_LUMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_REF_CHROMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_SUB_W_LUMA>,
+				 <&vdo_iommu M4U_PORT_L19_VENC_SUB_R_LUMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VENC>;
+			mediatek,scp = <&scp>;
+		};
+
 		disp_dsi: dsi@1c008000 {
 			compatible = "mediatek,mt8188-dsi";
 			reg = <0 0x1c008000 0 0x1000>;
-- 
2.46.1.824.gd892dcdcdd-goog

[PATCH 5/9] arm64: dts: mediatek: mt8188: Add JPEG decoder and encoder nodes

[Fei Shao]

Add JPEG encoder and decoder nodes for hardware-accelerated JPEG
decoding and encoding support.

Signed-off-by: Fei Shao <fshao@chromium.org>
---

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 29 ++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index dbea562ee8ba..c1b057166aa3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -2315,6 +2315,35 @@ video_encoder: video-encoder@1a020000 {
 			mediatek,scp = <&scp>;
 		};
 
+		jpeg_encoder: jpeg-encoder@1a030000 {
+			compatible = "mediatek,mt8188-jpgenc", "mediatek,mtk-jpgenc";
+			reg = <0 0x1a030000 0 0x10000>;
+			clocks = <&vencsys CLK_VENC1_JPGENC>;
+			clock-names = "jpgenc";
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L19_JPGENC_Y_RDMA>,
+				 <&vdo_iommu M4U_PORT_L19_JPGENC_C_RDMA>,
+				 <&vdo_iommu M4U_PORT_L19_JPGENC_Q_TABLE>,
+				 <&vdo_iommu M4U_PORT_L19_JPGENC_BSDMA>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VENC>;
+		};
+
+		jpeg_decoder: jpeg-decoder@1a040000 {
+			compatible = "mediatek,mt8188-jpgdec", "mediatek,mt2701-jpgdec";
+			reg = <0 0x1a040000 0 0x10000>;
+			clocks = <&vencsys CLK_VENC1_LARB>,
+				 <&vencsys CLK_VENC1_JPGDEC>;
+			clock-names = "jpgdec-smi", "jpgdec";
+			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L19_JPGDEC_WDMA_0>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_BSDMA_0>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_WDMA_1>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_BSDMA_1>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_HUFF_OFFSET_1>,
+				 <&vdo_iommu M4U_PORT_L19_JPGDEC_HUFF_OFFSET_0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDEC0>;
+		};
+
 		disp_dsi: dsi@1c008000 {
 			compatible = "mediatek,mt8188-dsi";
 			reg = <0 0x1c008000 0 0x1000>;
-- 
2.46.1.824.gd892dcdcdd-goog

[PATCH 6/9] arm64: dts: mediatek: mt8188: Add display nodes for vdosys0

[Fei Shao]

Add the vdosys0 display nodes to support the internal display pipeline.

Signed-off-by: Fei Shao <fshao@chromium.org>
---

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 86 ++++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index c1b057166aa3..79e007b619b7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -26,6 +26,7 @@ / {
 	aliases {
 		gce0 = &gce0;
 		gce1 = &gce1;
+		mutex0 = &mutex0;
 	};
 
 	cpus {
@@ -2344,6 +2345,71 @@ jpeg_decoder: jpeg-decoder@1a040000 {
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDEC0>;
 		};
 
+		ovl0: ovl@1c000000 {
+			compatible = "mediatek,mt8188-disp-ovl", "mediatek,mt8183-disp-ovl";
+			reg = <0 0x1c000000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>;
+			interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L0_DISP_OVL0_RDMA0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x0000 0x1000>;
+		};
+
+		rdma0: rdma@1c002000 {
+			compatible = "mediatek,mt8188-disp-rdma", "mediatek,mt8195-disp-rdma";
+			reg = <0 0x1c002000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>;
+			interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L1_DISP_RDMA0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>;
+		};
+
+		color0: color@1c003000 {
+			compatible = "mediatek,mt8188-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x1c003000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_COLOR0>;
+			interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x3000 0x1000>;
+		};
+
+		ccorr0: ccorr@1c004000 {
+			compatible = "mediatek,mt8188-disp-ccorr", "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1c004000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_CCORR0>;
+			interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x4000 0x1000>;
+		};
+
+		aal0: aal@1c005000 {
+			compatible = "mediatek,mt8188-disp-aal", "mediatek,mt8183-disp-aal";
+			reg = <0 0x1c005000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_AAL0>;
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x5000 0x1000>;
+		};
+
+		gamma0: gamma@1c006000 {
+			compatible = "mediatek,mt8188-disp-gamma", "mediatek,mt8195-disp-gamma";
+			reg = <0 0x1c006000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_GAMMA0>;
+			interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x6000 0x1000>;
+		};
+
+		dither0: dither@1c007000 {
+			compatible = "mediatek,mt8188-disp-dither", "mediatek,mt8183-disp-dither";
+			reg = <0 0x1c007000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_DITHER0>;
+			interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
+		};
+
 		disp_dsi: dsi@1c008000 {
 			compatible = "mediatek,mt8188-dsi";
 			reg = <0 0x1c008000 0 0x1000>;
@@ -2359,6 +2425,26 @@ disp_dsi: dsi@1c008000 {
 			status = "disabled";
 		};
 
+		mutex0: mutex@1c016000 {
+			compatible = "mediatek,mt8188-disp-mutex";
+			reg = <0 0x1c016000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>;
+			interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>;
+		};
+
+		postmask0: postmask@1c01a000 {
+			compatible = "mediatek,mt8188-disp-postmask",
+				     "mediatek,mt8192-disp-postmask";
+			reg = <0 0x1c01a000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_POSTMASK0>;
+			interrupts = <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xa000 0x1000>;
+		};
+
 		vdosys0: syscon@1c01d000 {
 			compatible = "mediatek,mt8188-vdosys0", "syscon";
 			reg = <0 0x1c01d000 0 0x1000>;
-- 
2.46.1.824.gd892dcdcdd-goog

[PATCH 7/9] arm64: dts: mediatek: mt8188: Add display nodes for vdosys1

[Fei Shao]

Add the vdosys1 display nodes to support the external display pipeline.

Signed-off-by: Fei Shao <fshao@chromium.org>
---

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 298 +++++++++++++++++++++++
 1 file changed, 298 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index 79e007b619b7..5410469e5fd8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -24,9 +24,32 @@ / {
 	#size-cells = <2>;
 
 	aliases {
+		ethdr0 = &ethdr0;
 		gce0 = &gce0;
 		gce1 = &gce1;
+		merge0 = &merge0;
+		merge1 = &merge1;
+		merge2 = &merge2;
+		merge3 = &merge3;
+		merge4 = &merge4;
 		mutex0 = &mutex0;
+		mutex1 = &mutex1;
+		padding0 = &padding0;
+		padding1 = &padding1;
+		padding2 = &padding2;
+		padding3 = &padding3;
+		padding4 = &padding4;
+		padding5 = &padding5;
+		padding6 = &padding6;
+		padding7 = &padding7;
+		vdo1-rdma0 = &vdo1_rdma0;
+		vdo1-rdma1 = &vdo1_rdma1;
+		vdo1-rdma2 = &vdo1_rdma2;
+		vdo1-rdma3 = &vdo1_rdma3;
+		vdo1-rdma4 = &vdo1_rdma4;
+		vdo1-rdma5 = &vdo1_rdma5;
+		vdo1-rdma6 = &vdo1_rdma6;
+		vdo1-rdma7 = &vdo1_rdma7;
 	};
 
 	cpus {
@@ -2505,6 +2528,16 @@ vdosys1: syscon@1c100000 {
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0 0x1000>;
 		};
 
+		mutex1: mutex@1c101000 {
+			compatible = "mediatek,mt8188-disp-mutex";
+			reg = <0 0x1c101000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
+			interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
+		};
+
 		larb2: smi@1c102000 {
 			compatible = "mediatek,mt8188-smi-larb";
 			reg = <0 0x1c102000 0 0x1000>;
@@ -2526,5 +2559,270 @@ larb3: smi@1c103000 {
 			mediatek,larb-id = <SMI_L3_ID>;
 			mediatek,smi = <&vpp_smi_common>;
 		};
+
+		vdo1_rdma0: rdma@1c104000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c104000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L2_MDP_RDMA0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+		};
+
+		vdo1_rdma1: rdma@1c105000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c105000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA1>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_MDP_RDMA1>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+		};
+
+		vdo1_rdma2: rdma@1c106000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c106000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA2>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L2_MDP_RDMA2>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+		};
+
+		vdo1_rdma3: rdma@1c107000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c107000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA3>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_MDP_RDMA3>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+		};
+
+		vdo1_rdma4: rdma@1c108000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c108000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA4>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L2_MDP_RDMA4>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+		};
+
+		vdo1_rdma5: rdma@1c109000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c109000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA5>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_MDP_RDMA5>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+		};
+
+		vdo1_rdma6: rdma@1c10a000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10a000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA6>;
+			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vdo_iommu M4U_PORT_L2_MDP_RDMA6>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+		};
+
+		vdo1_rdma7: rdma@1c10b000 {
+			compatible = "mediatek,mt8188-vdo1-rdma", "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10b000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA7>;
+			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_MDP_RDMA7>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			#dma-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+		};
+
+		merge0: merge@1c10c000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10c000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE0>,
+				 <&vdosys1 CLK_VDO1_MERGE0_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE0_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xc000 0x1000>;
+			mediatek,merge-mute;
+		};
+
+		merge1: merge@1c10d000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10d000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE1>,
+				 <&vdosys1 CLK_VDO1_MERGE1_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE1_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xd000 0x1000>;
+			mediatek,merge-mute;
+		};
+
+		merge2: merge@1c10e000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10e000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE2>,
+				 <&vdosys1 CLK_VDO1_MERGE2_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE2_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xe000 0x1000>;
+			mediatek,merge-mute;
+		};
+
+		merge3: merge@1c10f000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10f000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE3>,
+				 <&vdosys1 CLK_VDO1_MERGE3_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE3_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xf000 0x1000>;
+			mediatek,merge-mute;
+		};
+
+		merge4: merge@1c110000 {
+			compatible = "mediatek,mt8188-disp-merge", "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c110000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
+				 <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
+			clock-names = "merge", "merge_async";
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_MERGE4_DL_ASYNC>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x0000 0x1000>;
+			mediatek,merge-fifo-en;
+		};
+
+		ethdr0: ethdr@1c114000 {
+			compatible = "mediatek,mt8188-disp-ethdr", "mediatek,mt8195-disp-ethdr";
+			reg = <0 0x1c114000 0 0x1000>,
+			      <0 0x1c115000 0 0x1000>,
+			      <0 0x1c117000 0 0x1000>,
+			      <0 0x1c119000 0 0x1000>,
+			      <0 0x1c11a000 0 0x1000>,
+			      <0 0x1c11b000 0 0x1000>,
+			      <0 0x1c11c000 0 0x1000>;
+			reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				    "vdo_be", "adl_ds";
+
+			clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
+				 <&vdosys1 CLK_VDO1_26M_SLOW>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
+				 <&topckgen CLK_TOP_ETHDR>;
+			clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				      "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
+				      "gfx_fe0_async", "gfx_fe1_async", "vdo_be_async", "ethdr_top";
+
+			interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&vpp_iommu M4U_PORT_L3_HDR_DS_SMI>,
+				 <&vpp_iommu M4U_PORT_L3_HDR_ADL_SMI>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			resets = <&vdosys1 MT8188_VDO1_RST_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8188_VDO1_RST_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8188_VDO1_RST_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8188_VDO1_RST_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8188_VDO1_RST_HDR_VDO_BE_DL_ASYNC>;
+
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
+		};
+
+		padding0: padding@1c11d000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c11d000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>;
+		};
+
+		padding1: padding@1c11e000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c11e000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING1>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xe000 0x1000>;
+		};
+
+		padding2: padding@1c11f000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c11f000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING2>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xf000 0x1000>;
+		};
+
+		padding3: padding@1c120000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c120000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING3>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x0000 0x1000>;
+		};
+
+		padding4: padding@1c121000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c121000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING4>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x1000 0x1000>;
+		};
+
+		padding5: padding@1c122000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c122000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING5>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x2000 0x1000>;
+		};
+
+		padding6: padding@1c123000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c123000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING6>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x3000 0x1000>;
+		};
+
+		padding7: padding@1c124000 {
+			compatible = "mediatek,mt8188-disp-padding";
+			reg = <0 0x1c124000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_PADDING7>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x4000 0x1000>;
+		};
 	};
 };
-- 
2.46.1.824.gd892dcdcdd-goog

[PATCH 8/9] arm64: dts: mediatek: mt8188: Add DP-INTF nodes

[Fei Shao]

Add the primary and secondary dp-intf nodes.
These DP-INTF hardware IPs are the sink of the vdosys0 and vdosys1
display pipelines for the internal and external displays, respectively.

Individual board device tree should enable the nodes and connect input
and output ports as needed.

Signed-off-by: Fei Shao <fshao@chromium.org>
---

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index 5410469e5fd8..943333d2567f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -24,6 +24,8 @@ / {
 	#size-cells = <2>;
 
 	aliases {
+		dp-intf0 = &dp_intf0;
+		dp-intf1 = &dp_intf1;
 		ethdr0 = &ethdr0;
 		gce0 = &gce0;
 		gce1 = &gce1;
@@ -2448,6 +2450,18 @@ disp_dsi: dsi@1c008000 {
 			status = "disabled";
 		};
 
+		dp_intf0: dp-intf@1c015000 {
+			compatible = "mediatek,mt8188-dp-intf";
+			reg = <0 0x1c015000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+				 <&vdosys0 CLK_VDO0_DP_INTF0>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL1>;
+			clock-names = "pixel", "engine", "pll";
+			interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS0>;
+			status = "disabled";
+		};
+
 		mutex0: mutex@1c016000 {
 			compatible = "mediatek,mt8188-disp-mutex";
 			reg = <0 0x1c016000 0 0x1000>;
@@ -2713,6 +2727,18 @@ merge4: merge@1c110000 {
 			mediatek,merge-fifo-en;
 		};
 
+		dp_intf1: dp-intf@1c113000 {
+			compatible = "mediatek,mt8188-dp-intf";
+			reg = <0 0x1c113000 0 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_DPINTF>,
+				 <&vdosys1 CLK_VDO1_DP_INTF0_MMCK>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL2>;
+			clock-names = "pixel", "engine", "pll";
+			interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+			status = "disabled";
+		};
+
 		ethdr0: ethdr@1c114000 {
 			compatible = "mediatek,mt8188-disp-ethdr", "mediatek,mt8195-disp-ethdr";
 			reg = <0 0x1c114000 0 0x1000>,
-- 
2.46.1.824.gd892dcdcdd-goog

[PATCH 9/9] arm64: dts: mediatek: mt8188: Add eDP and DP TX nodes

[Fei Shao]

Add edp-tx and dp-tx nodes for the Embedded DisplayPort (eDP) and
DisplayPort ports to connect to DP-INTF ports and panels, and add the
efuse cell for the DP calibration data.

Individual board device tree should enable the nodes and connect input
and output ports as needed.

Signed-off-by: Fei Shao <fshao@chromium.org>
---

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index 943333d2567f..67c539e5d146 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -2004,6 +2004,10 @@ efuse: efuse@11f20000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			dp_calib_data: dp-calib@1a0 {
+				reg = <0x1a0 0xc>;
+			};
+
 			lvts_efuse_data1: lvts1-calib@1ac {
 				reg = <0x1ac 0x40>;
 			};
@@ -2850,5 +2854,27 @@ padding7: padding@1c124000 {
 			power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c12XXXX 0x4000 0x1000>;
 		};
+
+		edp_tx: edp-tx@1c500000 {
+			compatible = "mediatek,mt8188-edp-tx";
+			reg = <0 0x1c500000 0 0x8000>;
+			interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
+			nvmem-cells = <&dp_calib_data>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8188_POWER_DOMAIN_EDP_TX>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+
+		dp_tx: dp-tx@1c600000 {
+			compatible = "mediatek,mt8188-dp-tx";
+			reg = <0 0x1c600000 0 0x8000>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+			nvmem-cells = <&dp_calib_data>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8188_POWER_DOMAIN_DP_TX>;
+			max-linkrate-mhz = <5400>;
+			status = "disabled";
+		};
 	};
 };
-- 
2.46.1.824.gd892dcdcdd-goog