[PATCH v7 1/7] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string

[PATCH v7 1/7] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string

[Marek Vasut]

Document compatible string for the WILC3000 chip. The chip is similar
to WILC1000, except that the register layout is slightly different and
it does not support WPA3/SAE.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Adham Abozaeid <adham.abozaeid@microchip.com>
Cc: Ajay Singh <ajay.kathat@microchip.com>
Cc: Alexis Lothoré <alexis.lothore@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
---
V2: - Use WILC1000 as fallback compatible string for WILC3000
V3: - Swap the wilc1000/wilc3000 compatible order
V4: - Add RB from Krzysztof
V5: No change
V6: - Rebase on next-20240926
V7: - Rebase on next-20241003 / wireless-next/main 5a4d42c1688c
      with v2 wifi: wilc1000: Keep slot powered on during suspend/resume
---
 .../bindings/net/wireless/microchip,wilc1000.yaml           | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
index 2460ccc082371..5d40f22765bb6 100644
--- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
@@ -16,7 +16,11 @@ description:
 
 properties:
   compatible:
-    const: microchip,wilc1000
+    oneOf:
+      - items:
+          - const: microchip,wilc3000
+          - const: microchip,wilc1000
+      - const: microchip,wilc1000
 
   reg: true
 
-- 
2.45.2

[PATCH v7 2/7] wifi: wilc1000: Clean up usage of wilc_get_chipid()

[Marek Vasut]

Reduce the use of wilc_get_chipid(), use cached chip ID wherever
possible. Remove duplicated partial chip ID read implementations
from the driver. Update wilc_get_chipid() to always read the chip
ID out of the hardware and update the cached chip ID, and make it
return a proper return value instead of a chipid. Call wilc_get_chipid()
early to make the cached chip ID available to various sites using
is_wilc1000() to access the cached chip ID.

Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Adham Abozaeid <adham.abozaeid@microchip.com>
Cc: Ajay Singh <ajay.kathat@microchip.com>
Cc: Alexis Lothoré <alexis.lothore@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
---
V2: New patch
V3: - Undo setup in wilc_wlan_init() if chip is neither wilc1000 or wilc3000
    - Make wilc_get_chipid() return proper return value
V4: - Drop wilc_get_chipid() from netdev.c
    - Add RB from Alexis
V5: No change
V6: - Get chipid early in probe
    - Drop RB
    - Rebase on next-20240926
V7: - Update commit message
    - Reinstate RB
    - Rebase on next-20241003 / wireless-next/main 5a4d42c1688c
      with v2 wifi: wilc1000: Keep slot powered on during suspend/resume
---
 .../net/wireless/microchip/wilc1000/netdev.c  |  6 +-
 .../net/wireless/microchip/wilc1000/sdio.c    | 17 +----
 drivers/net/wireless/microchip/wilc1000/spi.c |  2 +-
 .../net/wireless/microchip/wilc1000/wlan.c    | 74 +++++++++++--------
 .../net/wireless/microchip/wilc1000/wlan.h    |  2 +-
 5 files changed, 52 insertions(+), 49 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 9ecf3fb29b558..086e70d833e06 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -195,13 +195,13 @@ static int wilc_wlan_get_firmware(struct net_device *dev)
 {
 	struct wilc_vif *vif = netdev_priv(dev);
 	struct wilc *wilc = vif->wilc;
-	int chip_id;
 	const struct firmware *wilc_fw;
 	int ret;
 
-	chip_id = wilc_get_chipid(wilc, false);
+	if (!is_wilc1000(wilc->chipid))
+		return -EINVAL;
 
-	netdev_info(dev, "ChipID [%x] loading firmware [%s]\n", chip_id,
+	netdev_info(dev, "WILC1000 loading firmware [%s]\n",
 		    WILC1000_FW(WILC1000_API_VER));
 
 	ret = request_firmware(&wilc_fw, WILC1000_FW(WILC1000_API_VER),
diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c
index d67662b6b2a1a..7bc6d788f33a7 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c
@@ -182,6 +182,10 @@ static int wilc_sdio_probe(struct sdio_func *func,
 
 	wilc_sdio_init(wilc, false);
 
+	ret = wilc_get_chipid(wilc);
+	if (ret)
+		goto dispose_irq;
+
 	ret = wilc_load_mac_from_nv(wilc);
 	if (ret) {
 		pr_err("Can not retrieve MAC address from chip\n");
@@ -667,7 +671,6 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume)
 	struct wilc_sdio *sdio_priv = wilc->bus_data;
 	struct sdio_cmd52 cmd;
 	int loop, ret;
-	u32 chipid;
 
 	/**
 	 *      function 0 csa enable
@@ -756,18 +759,6 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume)
 		return ret;
 	}
 
-	/**
-	 *      make sure can read back chip id correctly
-	 **/
-	if (!resume) {
-		ret = wilc_sdio_read_reg(wilc, WILC_CHIPID, &chipid);
-		if (ret) {
-			dev_err(&func->dev, "Fail cmd read chip id...\n");
-			return ret;
-		}
-		dev_err(&func->dev, "chipid (%08x)\n", chipid);
-	}
-
 	sdio_priv->isinit = true;
 	return 0;
 }
diff --git a/drivers/net/wireless/microchip/wilc1000/spi.c b/drivers/net/wireless/microchip/wilc1000/spi.c
index 05b577b1068ea..81cf82c9175ef 100644
--- a/drivers/net/wireless/microchip/wilc1000/spi.c
+++ b/drivers/net/wireless/microchip/wilc1000/spi.c
@@ -245,7 +245,7 @@ static int wilc_bus_probe(struct spi_device *spi)
 	if (ret)
 		goto power_down;
 
-	ret = wilc_validate_chipid(wilc);
+	ret = wilc_get_chipid(wilc);
 	if (ret)
 		goto power_down;
 
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 533939e71534a..1f113a55ea6aa 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -1402,9 +1402,37 @@ int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
 	return ret;
 }
 
+int wilc_get_chipid(struct wilc *wilc)
+{
+	u32 chipid = 0;
+	u32 rfrevid = 0;
+
+	if (wilc->chipid == 0) {
+		wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid);
+		wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID,
+					     &rfrevid);
+		if (!is_wilc1000(chipid)) {
+			wilc->chipid = 0;
+			return -EINVAL;
+		}
+		if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */
+			if (rfrevid != 0x1)
+				chipid = WILC_1000_BASE_ID_2A_REV1;
+		} else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */
+			if (rfrevid == 0x4)
+				chipid = WILC_1000_BASE_ID_2B_REV1;
+			else if (rfrevid != 0x3)
+				chipid = WILC_1000_BASE_ID_2B_REV2;
+		}
+
+		wilc->chipid = chipid;
+	}
+
+	return 0;
+}
+
 static int init_chip(struct net_device *dev)
 {
-	u32 chipid;
 	u32 reg;
 	int ret = 0;
 	struct wilc_vif *vif = netdev_priv(dev);
@@ -1412,9 +1440,11 @@ static int init_chip(struct net_device *dev)
 
 	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
 
-	chipid = wilc_get_chipid(wilc, true);
+	ret = wilc_get_chipid(wilc);
+	if (ret)
+		goto release;
 
-	if ((chipid & 0xfff) != 0xa0) {
+	if ((wilc->chipid & 0xfff) != 0xa0) {
 		ret = wilc->hif_func->hif_read_reg(wilc,
 						   WILC_CORTUS_RESET_MUX_SEL,
 						   &reg);
@@ -1445,34 +1475,6 @@ static int init_chip(struct net_device *dev)
 	return ret;
 }
 
-u32 wilc_get_chipid(struct wilc *wilc, bool update)
-{
-	u32 chipid = 0;
-	u32 rfrevid = 0;
-
-	if (wilc->chipid == 0 || update) {
-		wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid);
-		wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID,
-					     &rfrevid);
-		if (!is_wilc1000(chipid)) {
-			wilc->chipid = 0;
-			return wilc->chipid;
-		}
-		if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */
-			if (rfrevid != 0x1)
-				chipid = WILC_1000_BASE_ID_2A_REV1;
-		} else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */
-			if (rfrevid == 0x4)
-				chipid = WILC_1000_BASE_ID_2B_REV1;
-			else if (rfrevid != 0x3)
-				chipid = WILC_1000_BASE_ID_2B_REV2;
-		}
-
-		wilc->chipid = chipid;
-	}
-	return wilc->chipid;
-}
-
 int wilc_load_mac_from_nv(struct wilc *wl)
 {
 	int ret = -EINVAL;
@@ -1535,9 +1537,19 @@ int wilc_wlan_init(struct net_device *dev)
 	if (!wilc->hif_func->hif_is_init(wilc)) {
 		acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY);
 		ret = wilc->hif_func->hif_init(wilc, false);
+		if (!ret)
+			ret = wilc_get_chipid(wilc);
 		release_bus(wilc, WILC_BUS_RELEASE_ONLY);
 		if (ret)
 			goto fail;
+
+		if (!is_wilc1000(wilc->chipid)) {
+			netdev_err(dev, "Unsupported chipid: %x\n", wilc->chipid);
+			ret = -EINVAL;
+			goto fail;
+		}
+
+		netdev_dbg(dev, "chipid (%08x)\n", wilc->chipid);
 	}
 
 	if (!wilc->vmm_table)
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index dd2fb3c2f06a2..44dce53d24916 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -443,6 +443,6 @@ void chip_wakeup(struct wilc *wilc);
 int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
 			 u32 count);
 int wilc_wlan_init(struct net_device *dev);
-u32 wilc_get_chipid(struct wilc *wilc, bool update);
+int wilc_get_chipid(struct wilc *wilc);
 int wilc_load_mac_from_nv(struct wilc *wilc);
 #endif
-- 
2.45.2

[PATCH v7 3/7] wifi: wilc1000: Fold chip_allow_sleep()/chip_wakeup() into wlan.c

[Marek Vasut]

Neither chip_allow_sleep()/chip_wakeup() is used outside of wlan.c .
Make both functions static and remove both the exported symbol and
entries from wlan.h .

Make chip_allow_sleep() return error code in preparation for the
follow up patches.

Move acquire_bus() and release_bus() to avoid forward declaration
of chip_allow_sleep()/chip_wakeup().

Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Adham Abozaeid <adham.abozaeid@microchip.com>
Cc: Ajay Singh <ajay.kathat@microchip.com>
Cc: Alexis Lothoré <alexis.lothore@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
---
V2: New patch
V3: No change
V4: Add RB from Alexis
V5: No change
V6: - Rebase on next-20240926
V7: - Rebase on next-20241003 / wireless-next/main 5a4d42c1688c
      with v2 wifi: wilc1000: Keep slot powered on during suspend/resume
---
 .../net/wireless/microchip/wilc1000/wlan.c    | 47 +++++++++----------
 .../net/wireless/microchip/wilc1000/wlan.h    |  2 -
 2 files changed, 23 insertions(+), 26 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 1f113a55ea6aa..6f4be21296029 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -12,20 +12,6 @@
 
 #define WAKE_UP_TRIAL_RETRY		10000
 
-static inline void acquire_bus(struct wilc *wilc, enum bus_acquire acquire)
-{
-	mutex_lock(&wilc->hif_cs);
-	if (acquire == WILC_BUS_ACQUIRE_AND_WAKEUP && wilc->power_save_mode)
-		chip_wakeup(wilc);
-}
-
-static inline void release_bus(struct wilc *wilc, enum bus_release release)
-{
-	if (release == WILC_BUS_RELEASE_ALLOW_SLEEP && wilc->power_save_mode)
-		chip_allow_sleep(wilc);
-	mutex_unlock(&wilc->hif_cs);
-}
-
 static void wilc_wlan_txq_remove(struct wilc *wilc, u8 q_num,
 				 struct txq_entry_t *tqe)
 {
@@ -555,7 +541,7 @@ static struct rxq_entry_t *wilc_wlan_rxq_remove(struct wilc *wilc)
 	return rqe;
 }
 
-void chip_allow_sleep(struct wilc *wilc)
+static int chip_allow_sleep(struct wilc *wilc)
 {
 	u32 reg = 0;
 	const struct wilc_hif_func *hif_func = wilc->hif_func;
@@ -584,7 +570,7 @@ void chip_allow_sleep(struct wilc *wilc)
 	while (--trials) {
 		ret = hif_func->hif_read_reg(wilc, to_host_from_fw_reg, &reg);
 		if (ret)
-			return;
+			return ret;
 		if ((reg & to_host_from_fw_bit) == 0)
 			break;
 	}
@@ -594,28 +580,28 @@ void chip_allow_sleep(struct wilc *wilc)
 	/* Clear bit 1 */
 	ret = hif_func->hif_read_reg(wilc, wakeup_reg, &reg);
 	if (ret)
-		return;
+		return ret;
 	if (reg & wakeup_bit) {
 		reg &= ~wakeup_bit;
 		ret = hif_func->hif_write_reg(wilc, wakeup_reg, reg);
 		if (ret)
-			return;
+			return ret;
 	}
 
 	ret = hif_func->hif_read_reg(wilc, from_host_to_fw_reg, &reg);
 	if (ret)
-		return;
+		return ret;
 	if (reg & from_host_to_fw_bit) {
 		reg &= ~from_host_to_fw_bit;
 		ret = hif_func->hif_write_reg(wilc, from_host_to_fw_reg, reg);
 		if (ret)
-			return;
-
+			return ret;
 	}
+
+	return 0;
 }
-EXPORT_SYMBOL_GPL(chip_allow_sleep);
 
-void chip_wakeup(struct wilc *wilc)
+static void chip_wakeup(struct wilc *wilc)
 {
 	u32 ret = 0;
 	u32 clk_status_val = 0, trials = 0;
@@ -674,7 +660,20 @@ void chip_wakeup(struct wilc *wilc)
 	if (wilc->io_type == WILC_HIF_SPI)
 		wilc->hif_func->hif_reset(wilc);
 }
-EXPORT_SYMBOL_GPL(chip_wakeup);
+
+static inline void acquire_bus(struct wilc *wilc, enum bus_acquire acquire)
+{
+	mutex_lock(&wilc->hif_cs);
+	if (acquire == WILC_BUS_ACQUIRE_AND_WAKEUP && wilc->power_save_mode)
+		chip_wakeup(wilc);
+}
+
+static inline void release_bus(struct wilc *wilc, enum bus_release release)
+{
+	if (release == WILC_BUS_RELEASE_ALLOW_SLEEP && wilc->power_save_mode)
+		chip_allow_sleep(wilc);
+	mutex_unlock(&wilc->hif_cs);
+}
 
 void host_wakeup_notify(struct wilc *wilc)
 {
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index 44dce53d24916..90ba76cf14dd1 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -438,8 +438,6 @@ void wilc_wfi_p2p_rx(struct wilc_vif *vif, u8 *buff, u32 size);
 bool wilc_wfi_mgmt_frame_rx(struct wilc_vif *vif, u8 *buff, u32 size);
 void host_wakeup_notify(struct wilc *wilc);
 void host_sleep_notify(struct wilc *wilc);
-void chip_allow_sleep(struct wilc *wilc);
-void chip_wakeup(struct wilc *wilc);
 int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
 			 u32 count);
 int wilc_wlan_init(struct net_device *dev);
-- 
2.45.2

[PATCH v7 4/7] wifi: wilc1000: Fill in missing error handling

[Marek Vasut]

Add error handling to chip_wakeup() and propagate the errors throughout
the entire driver. Add error handling to acquire_bus()/release_bus() and
host_sleep_notify()/host_wakeup_notify() functions as a result as well.
Fill the error handling to all call sites.

Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Adham Abozaeid <adham.abozaeid@microchip.com>
Cc: Ajay Singh <ajay.kathat@microchip.com>
Cc: Alexis Lothoré <alexis.lothore@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
---
V3: New patch
V4: No change
V4: Add RB from Alexis
V5: No change
V6: - Rebase on next-20240926
V7: - Rebase on next-20241003 / wireless-next/main 5a4d42c1688c
      with v2 wifi: wilc1000: Keep slot powered on during suspend/resume
---
 .../net/wireless/microchip/wilc1000/sdio.c    |  11 +-
 .../net/wireless/microchip/wilc1000/wlan.c    | 154 +++++++++++++-----
 .../net/wireless/microchip/wilc1000/wlan.h    |   4 +-
 3 files changed, 118 insertions(+), 51 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c
index 7bc6d788f33a7..9173f6f3beabf 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c
@@ -960,6 +960,7 @@ static int wilc_sdio_suspend(struct device *dev)
 {
 	struct sdio_func *func = dev_to_sdio_func(dev);
 	struct wilc *wilc = sdio_get_drvdata(func);
+	int ret;
 
 	dev_info(dev, "sdio suspend\n");
 
@@ -969,7 +970,11 @@ static int wilc_sdio_suspend(struct device *dev)
 	if (!IS_ERR(wilc->rtc_clk))
 		clk_disable_unprepare(wilc->rtc_clk);
 
-	host_sleep_notify(wilc);
+	ret = host_sleep_notify(wilc);
+	if (ret) {
+		clk_prepare_enable(wilc->rtc_clk);
+		return ret;
+	}
 
 	wilc_sdio_disable_interrupt(wilc);
 
@@ -992,9 +997,7 @@ static int wilc_sdio_resume(struct device *dev)
 	wilc_sdio_init(wilc, true);
 	wilc_sdio_enable_interrupt(wilc);
 
-	host_wakeup_notify(wilc);
-
-	return 0;
+	return host_wakeup_notify(wilc);
 }
 
 static const struct of_device_id wilc_of_match[] = {
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 6f4be21296029..1aab8eca58169 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -601,7 +601,7 @@ static int chip_allow_sleep(struct wilc *wilc)
 	return 0;
 }
 
-static void chip_wakeup(struct wilc *wilc)
+static int chip_wakeup(struct wilc *wilc)
 {
 	u32 ret = 0;
 	u32 clk_status_val = 0, trials = 0;
@@ -630,20 +630,20 @@ static void chip_wakeup(struct wilc *wilc)
 	ret = hif_func->hif_write_reg(wilc, from_host_to_fw_reg,
 				      from_host_to_fw_bit);
 	if (ret)
-		return;
+		return ret;
 
 	/* Set wake-up bit */
 	ret = hif_func->hif_write_reg(wilc, wakeup_reg,
 				      wakeup_bit);
 	if (ret)
-		return;
+		return ret;
 
 	while (trials < WAKE_UP_TRIAL_RETRY) {
 		ret = hif_func->hif_read_reg(wilc, clk_status_reg,
 					     &clk_status_val);
 		if (ret) {
 			pr_err("Bus error %d %x\n", ret, clk_status_val);
-			return;
+			return ret;
 		}
 		if (clk_status_val & clk_status_bit)
 			break;
@@ -652,42 +652,63 @@ static void chip_wakeup(struct wilc *wilc)
 	}
 	if (trials >= WAKE_UP_TRIAL_RETRY) {
 		pr_err("Failed to wake-up the chip\n");
-		return;
+		return -ETIMEDOUT;
 	}
 	/* Sometimes spi fail to read clock regs after reading
 	 * writing clockless registers
 	 */
 	if (wilc->io_type == WILC_HIF_SPI)
 		wilc->hif_func->hif_reset(wilc);
+
+	return 0;
 }
 
-static inline void acquire_bus(struct wilc *wilc, enum bus_acquire acquire)
+static inline int acquire_bus(struct wilc *wilc, enum bus_acquire acquire)
 {
+	int ret = 0;
+
 	mutex_lock(&wilc->hif_cs);
-	if (acquire == WILC_BUS_ACQUIRE_AND_WAKEUP && wilc->power_save_mode)
-		chip_wakeup(wilc);
+	if (acquire == WILC_BUS_ACQUIRE_AND_WAKEUP && wilc->power_save_mode) {
+		ret = chip_wakeup(wilc);
+		if (ret)
+			mutex_unlock(&wilc->hif_cs);
+	}
+
+	return ret;
 }
 
-static inline void release_bus(struct wilc *wilc, enum bus_release release)
+static inline int release_bus(struct wilc *wilc, enum bus_release release)
 {
+	int ret = 0;
+
 	if (release == WILC_BUS_RELEASE_ALLOW_SLEEP && wilc->power_save_mode)
-		chip_allow_sleep(wilc);
+		ret = chip_allow_sleep(wilc);
 	mutex_unlock(&wilc->hif_cs);
+
+	return ret;
 }
 
-void host_wakeup_notify(struct wilc *wilc)
+int host_wakeup_notify(struct wilc *wilc)
 {
-	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	int ret = acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+
+	if (ret)
+		return ret;
+
 	wilc->hif_func->hif_write_reg(wilc, WILC_CORTUS_INTERRUPT_2, 1);
-	release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+	return release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 }
 EXPORT_SYMBOL_GPL(host_wakeup_notify);
 
-void host_sleep_notify(struct wilc *wilc)
+int host_sleep_notify(struct wilc *wilc)
 {
-	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	int ret = acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+
+	if (ret)
+		return ret;
+
 	wilc->hif_func->hif_write_reg(wilc, WILC_CORTUS_INTERRUPT_1, 1);
-	release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+	return release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 }
 EXPORT_SYMBOL_GPL(host_sleep_notify);
 
@@ -714,6 +735,7 @@ int wilc_wlan_handle_txq(struct wilc *wilc, u32 *txq_count)
 	int srcu_idx;
 	u8 *txb = wilc->tx_buffer;
 	struct wilc_vif *vif;
+	int rv;
 
 	if (wilc->quit)
 		goto out_update_cnt;
@@ -784,7 +806,10 @@ int wilc_wlan_handle_txq(struct wilc *wilc, u32 *txq_count)
 		goto out_unlock;
 	vmm_table[i] = 0x0;
 
-	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	ret = acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	if (ret)
+		goto out_unlock;
+
 	counter = 0;
 	func = wilc->hif_func;
 	do {
@@ -859,7 +884,9 @@ int wilc_wlan_handle_txq(struct wilc *wilc, u32 *txq_count)
 		goto out_release_bus;
 	}
 
-	release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+	ret = release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+	if (ret)
+		goto out_unlock;
 
 	offset = 0;
 	i = 0;
@@ -921,7 +948,9 @@ int wilc_wlan_handle_txq(struct wilc *wilc, u32 *txq_count)
 	for (i = 0; i < NQUEUES; i++)
 		wilc->txq[i].fw.count += ac_pkt_num_to_chip[i];
 
-	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	ret = acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	if (ret)
+		goto out_unlock;
 
 	ret = func->hif_clear_int_ext(wilc, ENABLE_TX_VMM);
 	if (ret)
@@ -930,7 +959,9 @@ int wilc_wlan_handle_txq(struct wilc *wilc, u32 *txq_count)
 	ret = func->hif_block_tx_ext(wilc, 0, txb, offset);
 
 out_release_bus:
-	release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+	rv = release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+	if (!ret && rv)
+		ret = rv;
 
 out_unlock:
 	mutex_unlock(&wilc->txq_add_to_head_cs);
@@ -1059,8 +1090,14 @@ static void wilc_wlan_handle_isr_ext(struct wilc *wilc, u32 int_status)
 void wilc_handle_isr(struct wilc *wilc)
 {
 	u32 int_status;
+	int ret;
+
+	ret = acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	if (ret) {
+		dev_err_ratelimited(wilc->dev, "Cannot acquire bus\n");
+		return;
+	}
 
-	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
 	wilc->hif_func->hif_read_int(wilc, &int_status);
 
 	if (int_status & DATA_INT_EXT)
@@ -1069,7 +1106,9 @@ void wilc_handle_isr(struct wilc *wilc)
 	if (!(int_status & (ALL_INT_EXT)))
 		wilc_unknown_isr_ext(wilc);
 
-	release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+	ret = release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+	if (ret)
+		dev_err_ratelimited(wilc->dev, "Cannot release bus\n");
 }
 EXPORT_SYMBOL_GPL(wilc_handle_isr);
 
@@ -1081,6 +1120,7 @@ int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
 	u8 *dma_buffer;
 	int ret = 0;
 	u32 reg = 0;
+	int rv;
 
 	blksz = BIT(12);
 
@@ -1091,7 +1131,9 @@ int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
 	offset = 0;
 	pr_debug("%s: Downloading firmware size = %d\n", __func__, buffer_size);
 
-	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	ret = acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	if (ret)
+		return ret;
 
 	wilc->hif_func->hif_read_reg(wilc, WILC_GLB_RESET_0, &reg);
 	reg &= ~BIT(10);
@@ -1100,11 +1142,17 @@ int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
 	if (reg & BIT(10))
 		pr_err("%s: Failed to reset\n", __func__);
 
-	release_bus(wilc, WILC_BUS_RELEASE_ONLY);
+	ret = release_bus(wilc, WILC_BUS_RELEASE_ONLY);
+	if (ret)
+		goto fail;
+
 	do {
 		addr = get_unaligned_le32(&buffer[offset]);
 		size = get_unaligned_le32(&buffer[offset + 4]);
-		acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+		ret = acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+		if (ret)
+			goto fail;
+
 		offset += 8;
 		while (((int)size) && (offset < buffer_size)) {
 			if (size <= blksz)
@@ -1122,7 +1170,9 @@ int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
 			offset += size2;
 			size -= size2;
 		}
-		release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+		rv = release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+		if (!ret && rv)
+			ret = rv;
 
 		if (ret) {
 			pr_err("%s Bus error\n", __func__);
@@ -1141,7 +1191,7 @@ int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
 int wilc_wlan_start(struct wilc *wilc)
 {
 	u32 reg = 0;
-	int ret;
+	int ret, rv;
 	u32 chipid;
 
 	if (wilc->io_type == WILC_HIF_SDIO) {
@@ -1150,7 +1200,10 @@ int wilc_wlan_start(struct wilc *wilc)
 	} else if (wilc->io_type == WILC_HIF_SPI) {
 		reg = 1;
 	}
-	acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY);
+	ret = acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY);
+	if (ret)
+		return ret;
+
 	ret = wilc->hif_func->hif_write_reg(wilc, WILC_VMM_CORE_CFG, reg);
 	if (ret)
 		goto release;
@@ -1181,16 +1234,18 @@ int wilc_wlan_start(struct wilc *wilc)
 	wilc->hif_func->hif_read_reg(wilc, WILC_GLB_RESET_0, &reg);
 
 release:
-	release_bus(wilc, WILC_BUS_RELEASE_ONLY);
-	return ret;
+	rv = release_bus(wilc, WILC_BUS_RELEASE_ONLY);
+	return ret ? ret : rv;
 }
 
 int wilc_wlan_stop(struct wilc *wilc, struct wilc_vif *vif)
 {
 	u32 reg = 0;
-	int ret;
+	int ret, rv;
 
-	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	ret = acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	if (ret)
+		return ret;
 
 	ret = wilc->hif_func->hif_read_reg(wilc, GLOBAL_MODE_CONTROL, &reg);
 	if (ret)
@@ -1226,9 +1281,9 @@ int wilc_wlan_stop(struct wilc *wilc, struct wilc_vif *vif)
 	ret = 0;
 release:
 	/* host comm is disabled - we can't issue sleep command anymore: */
-	release_bus(wilc, WILC_BUS_RELEASE_ONLY);
+	rv = release_bus(wilc, WILC_BUS_RELEASE_ONLY);
 
-	return ret;
+	return ret ? ret : rv;
 }
 
 void wilc_wlan_cleanup(struct net_device *dev)
@@ -1433,11 +1488,13 @@ int wilc_get_chipid(struct wilc *wilc)
 static int init_chip(struct net_device *dev)
 {
 	u32 reg;
-	int ret = 0;
+	int ret, rv;
 	struct wilc_vif *vif = netdev_priv(dev);
 	struct wilc *wilc = vif->wilc;
 
-	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	ret = acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	if (ret)
+		return ret;
 
 	ret = wilc_get_chipid(wilc);
 	if (ret)
@@ -1469,17 +1526,19 @@ static int init_chip(struct net_device *dev)
 	}
 
 release:
-	release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+	rv = release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 
-	return ret;
+	return ret ? ret : rv;
 }
 
 int wilc_load_mac_from_nv(struct wilc *wl)
 {
-	int ret = -EINVAL;
+	int ret, rv;
 	unsigned int i;
 
-	acquire_bus(wl, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	ret = acquire_bus(wl, WILC_BUS_ACQUIRE_AND_WAKEUP);
+	if (ret)
+		return ret;
 
 	for (i = 0; i < WILC_NVMEM_MAX_NUM_BANK; i++) {
 		int bank_offset = get_bank_offset_from_bank_index(i);
@@ -1518,14 +1577,14 @@ int wilc_load_mac_from_nv(struct wilc *wl)
 		break;
 	}
 
-	release_bus(wl, WILC_BUS_RELEASE_ALLOW_SLEEP);
-	return ret;
+	rv = release_bus(wl, WILC_BUS_RELEASE_ALLOW_SLEEP);
+	return ret ? ret : rv;
 }
 EXPORT_SYMBOL_GPL(wilc_load_mac_from_nv);
 
 int wilc_wlan_init(struct net_device *dev)
 {
-	int ret = 0;
+	int ret = 0, rv;
 	struct wilc_vif *vif = netdev_priv(dev);
 	struct wilc *wilc;
 
@@ -1534,11 +1593,16 @@ int wilc_wlan_init(struct net_device *dev)
 	wilc->quit = 0;
 
 	if (!wilc->hif_func->hif_is_init(wilc)) {
-		acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY);
+		ret = acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY);
+		if (ret)
+			return ret;
+
 		ret = wilc->hif_func->hif_init(wilc, false);
 		if (!ret)
 			ret = wilc_get_chipid(wilc);
-		release_bus(wilc, WILC_BUS_RELEASE_ONLY);
+		rv = release_bus(wilc, WILC_BUS_RELEASE_ONLY);
+		if (!ret && rv)
+			ret = rv;
 		if (ret)
 			goto fail;
 
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index 90ba76cf14dd1..552590823e444 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -436,8 +436,8 @@ netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *dev);
 
 void wilc_wfi_p2p_rx(struct wilc_vif *vif, u8 *buff, u32 size);
 bool wilc_wfi_mgmt_frame_rx(struct wilc_vif *vif, u8 *buff, u32 size);
-void host_wakeup_notify(struct wilc *wilc);
-void host_sleep_notify(struct wilc *wilc);
+int host_wakeup_notify(struct wilc *wilc);
+int host_sleep_notify(struct wilc *wilc);
 int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
 			 u32 count);
 int wilc_wlan_init(struct net_device *dev);
-- 
2.45.2

[PATCH v7 5/7] wifi: wilc1000: Fold wilc_create_wiphy() into cfg80211.c

[Marek Vasut]

The wilc_create_wiphy() is not used outside of cfg80211.c .
Make the function static and remove its entry from cfg80211.h

Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Adham Abozaeid <adham.abozaeid@microchip.com>
Cc: Ajay Singh <ajay.kathat@microchip.com>
Cc: Alexis Lothoré <alexis.lothore@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
---
V5: New patch
V6: - Add RB from Alexis
    - Rebase on next-20240926
V7: - Rebase on next-20241003 / wireless-next/main 5a4d42c1688c
      with v2 wifi: wilc1000: Keep slot powered on during suspend/resume
---
 .../wireless/microchip/wilc1000/cfg80211.c    | 94 +++++++++----------
 .../wireless/microchip/wilc1000/cfg80211.h    |  1 -
 2 files changed, 47 insertions(+), 48 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
index eb37b228d54ea..11e0f8a473467 100644
--- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c
+++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
@@ -1757,53 +1757,7 @@ void wlan_deinit_locks(struct wilc *wilc)
 	cleanup_srcu_struct(&wilc->srcu);
 }
 
-int wilc_cfg80211_init(struct wilc **wilc, struct device *dev, int io_type,
-		       const struct wilc_hif_func *ops)
-{
-	struct wilc *wl;
-	int ret, i;
-
-	wl = wilc_create_wiphy(dev);
-	if (!wl)
-		return -EINVAL;
-
-	wlan_init_locks(wl);
-
-	ret = wilc_wlan_cfg_init(wl);
-	if (ret)
-		goto free_wl;
-
-	*wilc = wl;
-	wl->io_type = io_type;
-	wl->hif_func = ops;
-
-	for (i = 0; i < NQUEUES; i++)
-		INIT_LIST_HEAD(&wl->txq[i].txq_head.list);
-
-	INIT_LIST_HEAD(&wl->rxq_head.list);
-	INIT_LIST_HEAD(&wl->vif_list);
-
-	wl->hif_workqueue = alloc_ordered_workqueue("%s", WQ_MEM_RECLAIM,
-						    wiphy_name(wl->wiphy));
-	if (!wl->hif_workqueue) {
-		ret = -ENOMEM;
-		goto free_cfg;
-	}
-
-	return 0;
-
-free_cfg:
-	wilc_wlan_cfg_deinit(wl);
-
-free_wl:
-	wlan_deinit_locks(wl);
-	wiphy_unregister(wl->wiphy);
-	wiphy_free(wl->wiphy);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(wilc_cfg80211_init);
-
-struct wilc *wilc_create_wiphy(struct device *dev)
+static struct wilc *wilc_create_wiphy(struct device *dev)
 {
 	struct wiphy *wiphy;
 	struct wilc *wl;
@@ -1861,6 +1815,52 @@ struct wilc *wilc_create_wiphy(struct device *dev)
 	return wl;
 }
 
+int wilc_cfg80211_init(struct wilc **wilc, struct device *dev, int io_type,
+		       const struct wilc_hif_func *ops)
+{
+	struct wilc *wl;
+	int ret, i;
+
+	wl = wilc_create_wiphy(dev);
+	if (!wl)
+		return -EINVAL;
+
+	wlan_init_locks(wl);
+
+	ret = wilc_wlan_cfg_init(wl);
+	if (ret)
+		goto free_wl;
+
+	*wilc = wl;
+	wl->io_type = io_type;
+	wl->hif_func = ops;
+
+	for (i = 0; i < NQUEUES; i++)
+		INIT_LIST_HEAD(&wl->txq[i].txq_head.list);
+
+	INIT_LIST_HEAD(&wl->rxq_head.list);
+	INIT_LIST_HEAD(&wl->vif_list);
+
+	wl->hif_workqueue = alloc_ordered_workqueue("%s", WQ_MEM_RECLAIM,
+						    wiphy_name(wl->wiphy));
+	if (!wl->hif_workqueue) {
+		ret = -ENOMEM;
+		goto free_cfg;
+	}
+
+	return 0;
+
+free_cfg:
+	wilc_wlan_cfg_deinit(wl);
+
+free_wl:
+	wlan_deinit_locks(wl);
+	wiphy_unregister(wl->wiphy);
+	wiphy_free(wl->wiphy);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wilc_cfg80211_init);
+
 int wilc_init_host_int(struct net_device *net)
 {
 	int ret;
diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.h b/drivers/net/wireless/microchip/wilc1000/cfg80211.h
index 8c65951cfaf96..fc04cc6615c1f 100644
--- a/drivers/net/wireless/microchip/wilc1000/cfg80211.h
+++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.h
@@ -10,7 +10,6 @@
 
 int wilc_cfg80211_init(struct wilc **wilc, struct device *dev, int io_type,
 		       const struct wilc_hif_func *ops);
-struct wilc *wilc_create_wiphy(struct device *dev);
 void wilc_deinit_host_int(struct net_device *net);
 int wilc_init_host_int(struct net_device *net);
 void wilc_wfi_monitor_rx(struct net_device *mon_dev, u8 *buff, u32 size);
-- 
2.45.2

[PATCH v7 6/7] wifi: wilc1000: Register wiphy after reading out chipid

[Marek Vasut]

Register wiphy after reading out chipid, so the chipid can be
used to determine chip features and not advertise WPA3/SAE
support to userspace on WILC3000. Note that wilc_netdev_cleanup()
will deregister the wiphy in fail path.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Adham Abozaeid <adham.abozaeid@microchip.com>
Cc: Ajay Singh <ajay.kathat@microchip.com>
Cc: Alexis Lothoré <alexis.lothore@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
---
V5: New patch
V6: - Rebase on next-20240926
V7: - Rebase on next-20241003 / wireless-next/main 5a4d42c1688c
      with v2 wifi: wilc1000: Keep slot powered on during suspend/resume
---
 .../net/wireless/microchip/wilc1000/cfg80211.c    | 15 ++++++++-------
 .../net/wireless/microchip/wilc1000/cfg80211.h    |  1 +
 drivers/net/wireless/microchip/wilc1000/sdio.c    |  4 ++++
 drivers/net/wireless/microchip/wilc1000/spi.c     |  4 ++++
 4 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
index 11e0f8a473467..30015c5920467 100644
--- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c
+++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
@@ -1761,7 +1761,6 @@ static struct wilc *wilc_create_wiphy(struct device *dev)
 {
 	struct wiphy *wiphy;
 	struct wilc *wl;
-	int ret;
 
 	wiphy = wiphy_new(&wilc_cfg80211_ops, sizeof(*wl));
 	if (!wiphy)
@@ -1804,14 +1803,8 @@ static struct wilc *wilc_create_wiphy(struct device *dev)
 				BIT(NL80211_IFTYPE_P2P_GO) |
 				BIT(NL80211_IFTYPE_P2P_CLIENT);
 	wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
-	wiphy->features |= NL80211_FEATURE_SAE;
 	set_wiphy_dev(wiphy, dev);
 	wl->wiphy = wiphy;
-	ret = wiphy_register(wiphy);
-	if (ret) {
-		wiphy_free(wiphy);
-		return NULL;
-	}
 	return wl;
 }
 
@@ -1861,6 +1854,14 @@ int wilc_cfg80211_init(struct wilc **wilc, struct device *dev, int io_type,
 }
 EXPORT_SYMBOL_GPL(wilc_cfg80211_init);
 
+int wilc_cfg80211_register(struct wilc *wilc)
+{
+	wilc->wiphy->features |= NL80211_FEATURE_SAE;
+
+	return wiphy_register(wilc->wiphy);
+}
+EXPORT_SYMBOL_GPL(wilc_cfg80211_register);
+
 int wilc_init_host_int(struct net_device *net)
 {
 	int ret;
diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.h b/drivers/net/wireless/microchip/wilc1000/cfg80211.h
index fc04cc6615c1f..2dc9c1c42d609 100644
--- a/drivers/net/wireless/microchip/wilc1000/cfg80211.h
+++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.h
@@ -10,6 +10,7 @@
 
 int wilc_cfg80211_init(struct wilc **wilc, struct device *dev, int io_type,
 		       const struct wilc_hif_func *ops);
+int wilc_cfg80211_register(struct wilc *wilc);
 void wilc_deinit_host_int(struct net_device *net);
 int wilc_init_host_int(struct net_device *net);
 void wilc_wfi_monitor_rx(struct net_device *mon_dev, u8 *buff, u32 size);
diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c
index 9173f6f3beabf..56a929281d6a7 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c
@@ -186,6 +186,10 @@ static int wilc_sdio_probe(struct sdio_func *func,
 	if (ret)
 		goto dispose_irq;
 
+	ret = wilc_cfg80211_register(wilc);
+	if (ret)
+		goto dispose_irq;
+
 	ret = wilc_load_mac_from_nv(wilc);
 	if (ret) {
 		pr_err("Can not retrieve MAC address from chip\n");
diff --git a/drivers/net/wireless/microchip/wilc1000/spi.c b/drivers/net/wireless/microchip/wilc1000/spi.c
index 81cf82c9175ef..28d211ee60096 100644
--- a/drivers/net/wireless/microchip/wilc1000/spi.c
+++ b/drivers/net/wireless/microchip/wilc1000/spi.c
@@ -249,6 +249,10 @@ static int wilc_bus_probe(struct spi_device *spi)
 	if (ret)
 		goto power_down;
 
+	ret = wilc_cfg80211_register(wilc);
+	if (ret)
+		goto power_down;
+
 	ret = wilc_load_mac_from_nv(wilc);
 	if (ret) {
 		pr_err("Can not retrieve MAC address from chip\n");
-- 
2.45.2

[PATCH v7 7/7] wifi: wilc1000: Add WILC3000 support

[Marek Vasut]

From: Ajay Singh <ajay.kathat@microchip.com>

Add support for the WILC3000 chip. The chip is similar to WILC1000,
except that the register layout is slightly different and it does
not support WPA3/SAE.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Note: Squashed and updated from the following downstream patches:
wifi: wilc1000: wilc3000 support added
wifi: wilc1000: wilc3000 interrupt handling
wifi: wilc1000: wilc3000 added chip wake and sleep support
wifi: wilc1000: wilc3000 FW file sepecific changes
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Adham Abozaeid <adham.abozaeid@microchip.com>
Cc: Ajay Singh <ajay.kathat@microchip.com>
Cc: Alexis Lothoré <alexis.lothore@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
---
V2: - Return -EINVAL in wilc_sdio_init() if chip ID is not supported
    - Dispose of wilc_chip_type, replace with is_wilc1000()/is_wilc3000()
    - Remove wilc3000 DT compatible string handling, match on wilc1000 only,
      the device type can be auto-detected based on chipID
V3: - Define and use WILC3000_BOOTROM_STATUS and WILC3000_CORTUS_BOOT_REGISTER_2
V4: - Fix up after dropping wilc_get_chipid() in netdev.c in 2/5
V5: - Advertise WPA3/SAE to userspace only on WILC1000 in wilc_create_wiphy()
V6: - Rebase on next-20240926
V7: - Fix firmware name printing in wilc_wlan_get_firmware() netdev_info()
    - Rebase on next-20241003 / wireless-next/main 5a4d42c1688c
      with v2 wifi: wilc1000: Keep slot powered on during suspend/resume
---
 .../wireless/microchip/wilc1000/cfg80211.c    |   4 +-
 .../net/wireless/microchip/wilc1000/netdev.c  |  29 ++-
 .../net/wireless/microchip/wilc1000/sdio.c    |  62 ++++-
 drivers/net/wireless/microchip/wilc1000/spi.c |   2 +-
 .../net/wireless/microchip/wilc1000/wlan.c    | 220 +++++++++++++++---
 .../net/wireless/microchip/wilc1000/wlan.h    |  45 +++-
 6 files changed, 299 insertions(+), 63 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
index 30015c5920467..cdb4b0bbeab3b 100644
--- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c
+++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
@@ -1856,7 +1856,9 @@ EXPORT_SYMBOL_GPL(wilc_cfg80211_init);
 
 int wilc_cfg80211_register(struct wilc *wilc)
 {
-	wilc->wiphy->features |= NL80211_FEATURE_SAE;
+	/* WPA3/SAE supported only on WILC1000 */
+	if (is_wilc1000(wilc->chipid))
+		wilc->wiphy->features |= NL80211_FEATURE_SAE;
 
 	return wiphy_register(wilc->wiphy);
 }
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 086e70d833e06..3bb13aa33413a 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -23,6 +23,12 @@
 #define __WILC1000_FW(api)		WILC1000_FW_PREFIX #api ".bin"
 #define WILC1000_FW(api)		__WILC1000_FW(api)
 
+#define WILC3000_API_VER		1
+
+#define WILC3000_FW_PREFIX		"atmel/wilc3000_wifi_firmware-"
+#define __WILC3000_FW(api)		WILC3000_FW_PREFIX #api ".bin"
+#define WILC3000_FW(api)		__WILC3000_FW(api)
+
 static irqreturn_t isr_uh_routine(int irq, void *user_data)
 {
 	struct wilc *wilc = user_data;
@@ -196,19 +202,23 @@ static int wilc_wlan_get_firmware(struct net_device *dev)
 	struct wilc_vif *vif = netdev_priv(dev);
 	struct wilc *wilc = vif->wilc;
 	const struct firmware *wilc_fw;
+	char *firmware;
 	int ret;
 
-	if (!is_wilc1000(wilc->chipid))
+	if (is_wilc1000(wilc->chipid))
+		firmware = WILC1000_FW(WILC1000_API_VER);
+	else if (is_wilc3000(wilc->chipid))
+		firmware = WILC3000_FW(WILC3000_API_VER);
+	else
 		return -EINVAL;
 
-	netdev_info(dev, "WILC1000 loading firmware [%s]\n",
-		    WILC1000_FW(WILC1000_API_VER));
+	netdev_info(dev, "WILC%d loading firmware [%s]\n",
+		    is_wilc1000(wilc->chipid) ? 1000 : 3000,
+		    firmware);
 
-	ret = request_firmware(&wilc_fw, WILC1000_FW(WILC1000_API_VER),
-			       wilc->dev);
+	ret = request_firmware(&wilc_fw, firmware, wilc->dev);
 	if (ret != 0) {
-		netdev_err(dev, "%s - firmware not available\n",
-			   WILC1000_FW(WILC1000_API_VER));
+		netdev_err(dev, "%s - firmware not available\n", firmware);
 		return -EINVAL;
 	}
 	wilc->firmware = wilc_fw;
@@ -233,7 +243,7 @@ static int wilc_start_firmware(struct net_device *dev)
 	return 0;
 }
 
-static int wilc1000_firmware_download(struct net_device *dev)
+static int wilc_firmware_download(struct net_device *dev)
 {
 	struct wilc_vif *vif = netdev_priv(dev);
 	struct wilc *wilc = vif->wilc;
@@ -528,7 +538,7 @@ static int wilc_wlan_initialize(struct net_device *dev, struct wilc_vif *vif)
 		if (ret)
 			goto fail_irq_enable;
 
-		ret = wilc1000_firmware_download(dev);
+		ret = wilc_firmware_download(dev);
 		if (ret)
 			goto fail_irq_enable;
 
@@ -1014,3 +1024,4 @@ EXPORT_SYMBOL_GPL(wilc_netdev_ifc_init);
 MODULE_DESCRIPTION("Atmel WILC1000 core wireless driver");
 MODULE_LICENSE("GPL");
 MODULE_FIRMWARE(WILC1000_FW(WILC1000_API_VER));
+MODULE_FIRMWARE(WILC3000_FW(WILC3000_API_VER));
diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c
index 56a929281d6a7..5262c8846c13d 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c
@@ -810,13 +810,19 @@ static int wilc_sdio_read_int(struct wilc *wilc, u32 *int_status)
 		cmd.address = WILC_SDIO_EXT_IRQ_FLAG_REG;
 	} else {
 		cmd.function = 0;
-		cmd.address = WILC_SDIO_IRQ_FLAG_REG;
+		cmd.address = is_wilc1000(wilc->chipid) ?
+			      WILC1000_SDIO_IRQ_FLAG_REG :
+			      WILC3000_SDIO_IRQ_FLAG_REG;
 	}
 	cmd.raw = 0;
 	cmd.read_write = 0;
 	cmd.data = 0;
 	wilc_sdio_cmd52(wilc, &cmd);
 	irq_flags = cmd.data;
+
+	if (sdio_priv->irq_gpio)
+		irq_flags &= is_wilc1000(wilc->chipid) ? 0x1f : 0x0f;
+
 	tmp |= FIELD_PREP(IRG_FLAGS_MASK, cmd.data);
 
 	if (FIELD_GET(UNHANDLED_IRQ_MASK, irq_flags))
@@ -838,22 +844,56 @@ static int wilc_sdio_clear_int_ext(struct wilc *wilc, u32 val)
 	if (sdio_priv->irq_gpio)
 		reg = val & (BIT(MAX_NUM_INT) - 1);
 
-	/* select VMM table 0 */
-	if (val & SEL_VMM_TBL0)
-		reg |= BIT(5);
-	/* select VMM table 1 */
-	if (val & SEL_VMM_TBL1)
-		reg |= BIT(6);
-	/* enable VMM */
-	if (val & EN_VMM)
-		reg |= BIT(7);
+	if (is_wilc1000(wilc->chipid)) {
+		/* select VMM table 0 */
+		if (val & SEL_VMM_TBL0)
+			reg |= BIT(5);
+		/* select VMM table 1 */
+		if (val & SEL_VMM_TBL1)
+			reg |= BIT(6);
+		/* enable VMM */
+		if (val & EN_VMM)
+			reg |= BIT(7);
+	} else {
+		if (sdio_priv->irq_gpio && reg) {
+			struct sdio_cmd52 cmd;
+
+			cmd.read_write = 1;
+			cmd.function = 0;
+			cmd.raw = 0;
+			cmd.address = WILC3000_SDIO_IRQ_FLAG_REG;
+			cmd.data = reg;
+
+			ret = wilc_sdio_cmd52(wilc, &cmd);
+			if (ret) {
+				dev_err(&func->dev,
+					"Failed cmd52, set 0xfe data (%d) ...\n",
+					__LINE__);
+				return ret;
+			}
+		}
+
+		reg = 0;
+		/* select VMM table 0 */
+		if (val & SEL_VMM_TBL0)
+			reg |= BIT(0);
+		/* select VMM table 1 */
+		if (val & SEL_VMM_TBL1)
+			reg |= BIT(1);
+		/* enable VMM */
+		if (val & EN_VMM)
+			reg |= BIT(2);
+	}
+
 	if (reg) {
 		struct sdio_cmd52 cmd;
 
 		cmd.read_write = 1;
 		cmd.function = 0;
 		cmd.raw = 0;
-		cmd.address = WILC_SDIO_IRQ_CLEAR_FLAG_REG;
+		cmd.address = is_wilc1000(wilc->chipid) ?
+			      WILC1000_SDIO_IRQ_CLEAR_FLAG_REG :
+			      WILC3000_SDIO_VMM_TBL_CTRL_REG;
 		cmd.data = reg;
 
 		ret = wilc_sdio_cmd52(wilc, &cmd);
diff --git a/drivers/net/wireless/microchip/wilc1000/spi.c b/drivers/net/wireless/microchip/wilc1000/spi.c
index 28d211ee60096..ce2a9cdd6aa78 100644
--- a/drivers/net/wireless/microchip/wilc1000/spi.c
+++ b/drivers/net/wireless/microchip/wilc1000/spi.c
@@ -1233,7 +1233,7 @@ static int wilc_validate_chipid(struct wilc *wilc)
 		dev_err(&spi->dev, "Fail cmd read chip id...\n");
 		return ret;
 	}
-	if (!is_wilc1000(chipid)) {
+	if (!is_wilc1000(chipid) && !is_wilc3000(chipid)) {
 		dev_err(&spi->dev, "Unknown chip id 0x%x\n", chipid);
 		return -ENODEV;
 	}
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 1aab8eca58169..0c0f78b97ba3f 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -541,7 +541,7 @@ static struct rxq_entry_t *wilc_wlan_rxq_remove(struct wilc *wilc)
 	return rqe;
 }
 
-static int chip_allow_sleep(struct wilc *wilc)
+static int chip_allow_sleep_wilc1000(struct wilc *wilc)
 {
 	u32 reg = 0;
 	const struct wilc_hif_func *hif_func = wilc->hif_func;
@@ -601,7 +601,41 @@ static int chip_allow_sleep(struct wilc *wilc)
 	return 0;
 }
 
-static int chip_wakeup(struct wilc *wilc)
+static int chip_allow_sleep_wilc3000(struct wilc *wilc)
+{
+	u32 reg = 0;
+	int ret;
+	const struct wilc_hif_func *hif_func = wilc->hif_func;
+
+	if (wilc->io_type == WILC_HIF_SDIO) {
+		ret = hif_func->hif_read_reg(wilc, WILC_SDIO_WAKEUP_REG, &reg);
+		if (ret)
+			return ret;
+		ret = hif_func->hif_write_reg(wilc, WILC_SDIO_WAKEUP_REG,
+					      reg & ~WILC_SDIO_WAKEUP_BIT);
+		if (ret)
+			return ret;
+	} else {
+		ret = hif_func->hif_read_reg(wilc, WILC_SPI_WAKEUP_REG, &reg);
+		if (ret)
+			return ret;
+		ret = hif_func->hif_write_reg(wilc, WILC_SPI_WAKEUP_REG,
+					      reg & ~WILC_SPI_WAKEUP_BIT);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+static int chip_allow_sleep(struct wilc *wilc)
+{
+	if (is_wilc1000(wilc->chipid))
+		return chip_allow_sleep_wilc1000(wilc);
+	else
+		return chip_allow_sleep_wilc3000(wilc);
+}
+
+static int chip_wakeup_wilc1000(struct wilc *wilc)
 {
 	u32 ret = 0;
 	u32 clk_status_val = 0, trials = 0;
@@ -613,15 +647,15 @@ static int chip_wakeup(struct wilc *wilc)
 	if (wilc->io_type == WILC_HIF_SDIO) {
 		wakeup_reg = WILC_SDIO_WAKEUP_REG;
 		wakeup_bit = WILC_SDIO_WAKEUP_BIT;
-		clk_status_reg = WILC_SDIO_CLK_STATUS_REG;
-		clk_status_bit = WILC_SDIO_CLK_STATUS_BIT;
+		clk_status_reg = WILC1000_SDIO_CLK_STATUS_REG;
+		clk_status_bit = WILC1000_SDIO_CLK_STATUS_BIT;
 		from_host_to_fw_reg = WILC_SDIO_HOST_TO_FW_REG;
 		from_host_to_fw_bit = WILC_SDIO_HOST_TO_FW_BIT;
 	} else {
 		wakeup_reg = WILC_SPI_WAKEUP_REG;
 		wakeup_bit = WILC_SPI_WAKEUP_BIT;
-		clk_status_reg = WILC_SPI_CLK_STATUS_REG;
-		clk_status_bit = WILC_SPI_CLK_STATUS_BIT;
+		clk_status_reg = WILC1000_SPI_CLK_STATUS_REG;
+		clk_status_bit = WILC1000_SPI_CLK_STATUS_BIT;
 		from_host_to_fw_reg = WILC_SPI_HOST_TO_FW_REG;
 		from_host_to_fw_bit = WILC_SPI_HOST_TO_FW_BIT;
 	}
@@ -663,6 +697,74 @@ static int chip_wakeup(struct wilc *wilc)
 	return 0;
 }
 
+static int chip_wakeup_wilc3000(struct wilc *wilc)
+{
+	u32 wakeup_reg_val, clk_status_reg_val, trials = 0;
+	u32 wakeup_reg, wakeup_bit;
+	u32 clk_status_reg, clk_status_bit;
+	int wake_seq_trials = 5;
+	const struct wilc_hif_func *hif_func = wilc->hif_func;
+
+	if (wilc->io_type == WILC_HIF_SDIO) {
+		wakeup_reg = WILC_SDIO_WAKEUP_REG;
+		wakeup_bit = WILC_SDIO_WAKEUP_BIT;
+		clk_status_reg = WILC3000_SDIO_CLK_STATUS_REG;
+		clk_status_bit = WILC3000_SDIO_CLK_STATUS_BIT;
+	} else {
+		wakeup_reg = WILC_SPI_WAKEUP_REG;
+		wakeup_bit = WILC_SPI_WAKEUP_BIT;
+		clk_status_reg = WILC3000_SPI_CLK_STATUS_REG;
+		clk_status_bit = WILC3000_SPI_CLK_STATUS_BIT;
+	}
+
+	hif_func->hif_read_reg(wilc, wakeup_reg, &wakeup_reg_val);
+	do {
+		hif_func->hif_write_reg(wilc, wakeup_reg, wakeup_reg_val |
+							  wakeup_bit);
+		/* Check the clock status */
+		hif_func->hif_read_reg(wilc, clk_status_reg,
+				       &clk_status_reg_val);
+
+		/* In case of clocks off, wait 1ms, and check it again.
+		 * if still off, wait for another 1ms, for a total wait of 3ms.
+		 * If still off, redo the wake up sequence
+		 */
+		while ((clk_status_reg_val & clk_status_bit) == 0 &&
+		       (++trials % 4) != 0) {
+			/* Wait for the chip to stabilize*/
+			usleep_range(1000, 1100);
+
+			/* Make sure chip is awake. This is an extra step that
+			 * can be removed later to avoid the bus access
+			 * overhead
+			 */
+			hif_func->hif_read_reg(wilc, clk_status_reg,
+					       &clk_status_reg_val);
+		}
+		/* in case of failure, Reset the wakeup bit to introduce a new
+		 * edge on the next loop
+		 */
+		if ((clk_status_reg_val & clk_status_bit) == 0) {
+			hif_func->hif_write_reg(wilc, wakeup_reg,
+						wakeup_reg_val & (~wakeup_bit));
+			/* added wait before wakeup sequence retry */
+			usleep_range(200, 300);
+		}
+	} while ((clk_status_reg_val & clk_status_bit) == 0 && wake_seq_trials-- > 0);
+	if (!wake_seq_trials)
+		dev_err(wilc->dev, "clocks still OFF. Wake up failed\n");
+
+	return 0;
+}
+
+static int chip_wakeup(struct wilc *wilc)
+{
+	if (is_wilc1000(wilc->chipid))
+		return chip_wakeup_wilc1000(wilc);
+	else
+		return chip_wakeup_wilc3000(wilc);
+}
+
 static inline int acquire_bus(struct wilc *wilc, enum bus_acquire acquire)
 {
 	int ret = 0;
@@ -695,7 +797,9 @@ int host_wakeup_notify(struct wilc *wilc)
 	if (ret)
 		return ret;
 
-	wilc->hif_func->hif_write_reg(wilc, WILC_CORTUS_INTERRUPT_2, 1);
+	wilc->hif_func->hif_write_reg(wilc, is_wilc1000(wilc->chipid) ?
+					    WILC1000_CORTUS_INTERRUPT_2 :
+					    WILC3000_CORTUS_INTERRUPT_2, 1);
 	return release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 }
 EXPORT_SYMBOL_GPL(host_wakeup_notify);
@@ -707,7 +811,9 @@ int host_sleep_notify(struct wilc *wilc)
 	if (ret)
 		return ret;
 
-	wilc->hif_func->hif_write_reg(wilc, WILC_CORTUS_INTERRUPT_1, 1);
+	wilc->hif_func->hif_write_reg(wilc, is_wilc1000(wilc->chipid) ?
+					    WILC1000_CORTUS_INTERRUPT_1 :
+					    WILC3000_CORTUS_INTERRUPT_1, 1);
 	return release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 }
 EXPORT_SYMBOL_GPL(host_sleep_notify);
@@ -842,19 +948,45 @@ int wilc_wlan_handle_txq(struct wilc *wilc, u32 *txq_count)
 		if (ret)
 			break;
 
-		ret = func->hif_write_reg(wilc, WILC_HOST_VMM_CTL, 0x2);
-		if (ret)
-			break;
+		if (is_wilc1000(wilc->chipid)) {
+			ret = func->hif_write_reg(wilc, WILC_HOST_VMM_CTL, 0x2);
+			if (ret)
+				break;
 
-		do {
-			ret = func->hif_read_reg(wilc, WILC_HOST_VMM_CTL, &reg);
+			do {
+				ret = func->hif_read_reg(wilc, WILC_HOST_VMM_CTL, &reg);
+				if (ret)
+					break;
+				if (FIELD_GET(WILC_VMM_ENTRY_AVAILABLE, reg)) {
+					entries = FIELD_GET(WILC_VMM_ENTRY_COUNT, reg);
+					break;
+				}
+			} while (--timeout);
+		} else {
+			ret = func->hif_write_reg(wilc, WILC_HOST_VMM_CTL, 0);
 			if (ret)
 				break;
-			if (FIELD_GET(WILC_VMM_ENTRY_AVAILABLE, reg)) {
-				entries = FIELD_GET(WILC_VMM_ENTRY_COUNT, reg);
+
+			/* interrupt firmware */
+			ret = func->hif_write_reg(wilc, WILC_CORTUS_INTERRUPT_BASE, 1);
+			if (ret)
 				break;
-			}
-		} while (--timeout);
+
+			do {
+				ret = func->hif_read_reg(wilc, WILC_CORTUS_INTERRUPT_BASE, &reg);
+				if (ret)
+					break;
+				if (reg == 0) {
+					/* Get the entries */
+					ret = func->hif_read_reg(wilc, WILC_HOST_VMM_CTL, &reg);
+					if (ret)
+						break;
+
+					entries = FIELD_GET(WILC_VMM_ENTRY_COUNT, reg);
+					break;
+				}
+			} while (--timeout);
+		}
 		if (timeout <= 0) {
 			ret = func->hif_write_reg(wilc, WILC_HOST_VMM_CTL, 0x0);
 			break;
@@ -1212,6 +1344,9 @@ int wilc_wlan_start(struct wilc *wilc)
 	if (wilc->io_type == WILC_HIF_SDIO && wilc->dev_irq_num)
 		reg |= WILC_HAVE_SDIO_IRQ_GPIO;
 
+	if (is_wilc3000(wilc->chipid))
+		reg |= WILC_HAVE_SLEEP_CLK_SRC_RTC;
+
 	ret = wilc->hif_func->hif_write_reg(wilc, WILC_GP_REG_1, reg);
 	if (ret)
 		goto release;
@@ -1462,21 +1597,25 @@ int wilc_get_chipid(struct wilc *wilc)
 	u32 rfrevid = 0;
 
 	if (wilc->chipid == 0) {
-		wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid);
-		wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID,
-					     &rfrevid);
-		if (!is_wilc1000(chipid)) {
-			wilc->chipid = 0;
-			return -EINVAL;
-		}
-		if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */
-			if (rfrevid != 0x1)
-				chipid = WILC_1000_BASE_ID_2A_REV1;
-		} else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */
-			if (rfrevid == 0x4)
-				chipid = WILC_1000_BASE_ID_2B_REV1;
-			else if (rfrevid != 0x3)
-				chipid = WILC_1000_BASE_ID_2B_REV2;
+		wilc->hif_func->hif_read_reg(wilc, WILC3000_CHIP_ID, &chipid);
+		if (!is_wilc3000(chipid)) {
+			wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid);
+			wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID,
+						     &rfrevid);
+
+			if (!is_wilc1000(chipid)) {
+				wilc->chipid = 0;
+				return -EINVAL;
+			}
+			if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */
+				if (rfrevid != 0x1)
+					chipid = WILC_1000_BASE_ID_2A_REV1;
+			} else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */
+				if (rfrevid == 0x4)
+					chipid = WILC_1000_BASE_ID_2B_REV1;
+				else if (rfrevid != 0x3)
+					chipid = WILC_1000_BASE_ID_2B_REV2;
+			}
 		}
 
 		wilc->chipid = chipid;
@@ -1525,6 +1664,21 @@ static int init_chip(struct net_device *dev)
 		}
 	}
 
+	if (is_wilc3000(wilc->chipid)) {
+		ret = wilc->hif_func->hif_read_reg(wilc, WILC3000_BOOTROM_STATUS, &reg);
+		if (ret) {
+			netdev_err(dev, "failed to read WILC3000 BootROM status register\n");
+			goto release;
+		}
+
+		ret = wilc->hif_func->hif_write_reg(wilc, WILC3000_CORTUS_BOOT_REGISTER_2,
+						    WILC_CORTUS_BOOT_FROM_IRAM);
+		if (ret) {
+			netdev_err(dev, "failed to write WILC3000 Boot register\n");
+			goto release;
+		}
+	}
+
 release:
 	rv = release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 
@@ -1606,7 +1760,7 @@ int wilc_wlan_init(struct net_device *dev)
 		if (ret)
 			goto fail;
 
-		if (!is_wilc1000(wilc->chipid)) {
+		if (!is_wilc1000(wilc->chipid) && !is_wilc3000(wilc->chipid)) {
 			netdev_err(dev, "Unsupported chipid: %x\n", wilc->chipid);
 			ret = -EINVAL;
 			goto fail;
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index 552590823e444..b9e7f9222eadd 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -96,8 +96,14 @@
 #define WILC_SPI_WAKEUP_REG		0x1
 #define WILC_SPI_WAKEUP_BIT		BIT(1)
 
-#define WILC_SPI_CLK_STATUS_REG        0x0f
-#define WILC_SPI_CLK_STATUS_BIT        BIT(2)
+/* WILC1000 specific */
+#define WILC1000_SPI_CLK_STATUS_REG	0x0f
+#define WILC1000_SPI_CLK_STATUS_BIT	BIT(2)
+
+/* WILC3000 specific */
+#define WILC3000_SPI_CLK_STATUS_REG	0x13
+#define WILC3000_SPI_CLK_STATUS_BIT	BIT(2)
+
 #define WILC_SPI_HOST_TO_FW_REG		0x0b
 #define WILC_SPI_HOST_TO_FW_BIT		BIT(0)
 
@@ -123,14 +129,24 @@
 #define WILC_SDIO_WAKEUP_REG		0xf0
 #define WILC_SDIO_WAKEUP_BIT		BIT(0)
 
-#define WILC_SDIO_CLK_STATUS_REG	0xf1
-#define WILC_SDIO_CLK_STATUS_BIT	BIT(0)
+/* WILC1000 */
+#define WILC1000_SDIO_CLK_STATUS_REG	0xf1
+#define WILC1000_SDIO_CLK_STATUS_BIT	BIT(0)
+
+#define WILC1000_SDIO_IRQ_FLAG_REG	0xf7
+#define WILC1000_SDIO_IRQ_CLEAR_FLAG_REG	0xf8
+
+/* WILC3000 specific */
+#define WILC3000_SDIO_CLK_STATUS_REG	0xf0 /* clk & wakeup are on same reg */
+#define WILC3000_SDIO_CLK_STATUS_BIT	BIT(4)
+
+#define WILC3000_SDIO_VMM_TBL_CTRL_REG	0xf1
+#define WILC3000_SDIO_IRQ_FLAG_REG	0xfe
 
+/* Common vendor specific CCCR register */
 #define WILC_SDIO_INTERRUPT_DATA_SZ_REG	0xf2 /* Read size (2 bytes) */
 
 #define WILC_SDIO_VMM_TBL_CTRL_REG	0xf6
-#define WILC_SDIO_IRQ_FLAG_REG		0xf7
-#define WILC_SDIO_IRQ_CLEAR_FLAG_REG	0xf8
 
 #define WILC_SDIO_HOST_TO_FW_REG	0xfa
 #define WILC_SDIO_HOST_TO_FW_BIT	BIT(0)
@@ -172,8 +188,11 @@
 #define WILC_HAVE_USE_IRQ_AS_HOST_WAKE	BIT(8)
 
 #define WILC_CORTUS_INTERRUPT_BASE	0x10A8
-#define WILC_CORTUS_INTERRUPT_1		(WILC_CORTUS_INTERRUPT_BASE + 0x4)
-#define WILC_CORTUS_INTERRUPT_2		(WILC_CORTUS_INTERRUPT_BASE + 0x8)
+#define WILC1000_CORTUS_INTERRUPT_1	(WILC_CORTUS_INTERRUPT_BASE + 0x4)
+#define WILC3000_CORTUS_INTERRUPT_1	(WILC_CORTUS_INTERRUPT_BASE + 0x14)
+
+#define WILC1000_CORTUS_INTERRUPT_2	(WILC_CORTUS_INTERRUPT_BASE + 0x8)
+#define WILC3000_CORTUS_INTERRUPT_2	(WILC_CORTUS_INTERRUPT_BASE + 0x18)
 
 /* tx control register 1 to 4 for RX */
 #define WILC_REG_4_TO_1_RX		0x1e1c
@@ -183,6 +202,9 @@
 
 #define WILC_CORTUS_RESET_MUX_SEL	0x1118
 #define WILC_CORTUS_BOOT_REGISTER	0xc0000
+#define WILC3000_BOOTROM_STATUS		0x207ac
+#define WILC3000_CORTUS_BOOT_REGISTER_2	0x4f0000
+#define WILC3000_CHIP_ID		0x3b0000
 
 #define WILC_CORTUS_BOOT_FROM_IRAM	0x71
 
@@ -195,6 +217,8 @@
 #define WILC_1000_BASE_ID_2B_REV1	(WILC_1000_BASE_ID_2B + 1)
 #define WILC_1000_BASE_ID_2B_REV2	(WILC_1000_BASE_ID_2B + 2)
 
+#define WILC_3000_BASE_ID		0x300000
+
 #define WILC_CHIP_REV_FIELD		GENMASK(11, 0)
 
 /********************************************
@@ -413,6 +437,11 @@ static inline bool is_wilc1000(u32 id)
 	return (id & (~WILC_CHIP_REV_FIELD)) == WILC_1000_BASE_ID;
 }
 
+static inline bool is_wilc3000(u32 id)
+{
+	return (id & (~WILC_CHIP_REV_FIELD)) == WILC_3000_BASE_ID;
+}
+
 int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
 				u32 buffer_size);
 int wilc_wlan_start(struct wilc *wilc);
-- 
2.45.2

Re: [PATCH v7 2/7] wifi: wilc1000: Clean up usage of wilc_get_chipid()

[Alexis Lothoré]

On 10/3/24 13:14, Marek Vasut wrote:
> Reduce the use of wilc_get_chipid(), use cached chip ID wherever
> possible. Remove duplicated partial chip ID read implementations
> from the driver. Update wilc_get_chipid() to always read the chip
> ID out of the hardware and update the cached chip ID, and make it
> return a proper return value instead of a chipid. Call wilc_get_chipid()
> early to make the cached chip ID available to various sites using
> is_wilc1000() to access the cached chip ID.
> 
> Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
> Signed-off-by: Marek Vasut <marex@denx.de>

[...]

> +int wilc_get_chipid(struct wilc *wilc)
> +{
> +	u32 chipid = 0;
> +	u32 rfrevid = 0;
> +
> +	if (wilc->chipid == 0) {
> +		wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid);
> +		wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID,
> +					     &rfrevid);
> +		if (!is_wilc1000(chipid)) {
> +			wilc->chipid = 0;
> +			return -EINVAL;
> +		}
> +		if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */
> +			if (rfrevid != 0x1)
> +				chipid = WILC_1000_BASE_ID_2A_REV1;
> +		} else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */
> +			if (rfrevid == 0x4)
> +				chipid = WILC_1000_BASE_ID_2B_REV1;
> +			else if (rfrevid != 0x3)
> +				chipid = WILC_1000_BASE_ID_2B_REV2;
> +		}
> +
> +		wilc->chipid = chipid;
> +	}
> +
> +	return 0;
> +}

My bad for not having spotted it in v6, but you are still missing an
EXPORT_SYMBOL_GPL(wilc_get_chipid) here, making the build fail if wilc support
is built as module:

ERROR: modpost: "wilc_get_chipid"
[drivers/net/wireless/microchip/wilc1000/wilc1000-sdio.ko] undefined!
ERROR: modpost: "wilc_get_chipid"
[drivers/net/wireless/microchip/wilc1000/wilc1000-spi.ko] undefined!
make[2]: *** [scripts/Makefile.modpost:145: Module.symvers] Error 1
make[1]: *** [/home/alexis/src/microchip/linux/Makefile:1878: modpost] Error 2
make: *** [Makefile:224: __sub-make] Error 2


-- 
Alexis Lothoré, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v7 2/7] wifi: wilc1000: Clean up usage of wilc_get_chipid()

[Marek Vasut]

On 10/3/24 7:33 PM, Alexis Lothoré wrote:
> On 10/3/24 13:14, Marek Vasut wrote:
>> Reduce the use of wilc_get_chipid(), use cached chip ID wherever
>> possible. Remove duplicated partial chip ID read implementations
>> from the driver. Update wilc_get_chipid() to always read the chip
>> ID out of the hardware and update the cached chip ID, and make it
>> return a proper return value instead of a chipid. Call wilc_get_chipid()
>> early to make the cached chip ID available to various sites using
>> is_wilc1000() to access the cached chip ID.
>>
>> Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
>> Signed-off-by: Marek Vasut <marex@denx.de>
> 
> [...]
> 
>> +int wilc_get_chipid(struct wilc *wilc)
>> +{
>> +	u32 chipid = 0;
>> +	u32 rfrevid = 0;
>> +
>> +	if (wilc->chipid == 0) {
>> +		wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid);
>> +		wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID,
>> +					     &rfrevid);
>> +		if (!is_wilc1000(chipid)) {
>> +			wilc->chipid = 0;
>> +			return -EINVAL;
>> +		}
>> +		if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */
>> +			if (rfrevid != 0x1)
>> +				chipid = WILC_1000_BASE_ID_2A_REV1;
>> +		} else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */
>> +			if (rfrevid == 0x4)
>> +				chipid = WILC_1000_BASE_ID_2B_REV1;
>> +			else if (rfrevid != 0x3)
>> +				chipid = WILC_1000_BASE_ID_2B_REV2;
>> +		}
>> +
>> +		wilc->chipid = chipid;
>> +	}
>> +
>> +	return 0;
>> +}
> 
> My bad for not having spotted it in v6, but you are still missing an
> EXPORT_SYMBOL_GPL(wilc_get_chipid) here, making the build fail if wilc support
> is built as module:
> 
> ERROR: modpost: "wilc_get_chipid"
> [drivers/net/wireless/microchip/wilc1000/wilc1000-sdio.ko] undefined!
> ERROR: modpost: "wilc_get_chipid"
> [drivers/net/wireless/microchip/wilc1000/wilc1000-spi.ko] undefined!
> make[2]: *** [scripts/Makefile.modpost:145: Module.symvers] Error 1
> make[1]: *** [/home/alexis/src/microchip/linux/Makefile:1878: modpost] Error 2
> make: *** [Makefile:224: __sub-make] Error 2
Fixed in V8, thanks.

Before I send V8, can you have a look at the last two patches in this 
series? They need some RB/TB.

Thanks !

Re: [PATCH v7 6/7] wifi: wilc1000: Register wiphy after reading out chipid

[Alexis Lothoré]

Hello Marek,

On 10/3/24 13:14, Marek Vasut wrote:
> Register wiphy after reading out chipid, so the chipid can be
> used to determine chip features and not advertise WPA3/SAE
> support to userspace on WILC3000. Note that wilc_netdev_cleanup()
> will deregister the wiphy in fail path.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>

[...]

> diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
> index 11e0f8a473467..30015c5920467 100644
> --- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c
> +++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
> @@ -1761,7 +1761,6 @@ static struct wilc *wilc_create_wiphy(struct device *dev)
>  {
>  	struct wiphy *wiphy;
>  	struct wilc *wl;
> -	int ret;
>  
>  	wiphy = wiphy_new(&wilc_cfg80211_ops, sizeof(*wl));
>  	if (!wiphy)
> @@ -1804,14 +1803,8 @@ static struct wilc *wilc_create_wiphy(struct device *dev)
>  				BIT(NL80211_IFTYPE_P2P_GO) |
>  				BIT(NL80211_IFTYPE_P2P_CLIENT);
>  	wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
> -	wiphy->features |= NL80211_FEATURE_SAE;
>  	set_wiphy_dev(wiphy, dev);
>  	wl->wiphy = wiphy;
> -	ret = wiphy_register(wiphy);

I think you did not address one of my comment in v5 about this change: in
wilc_cfg80211_init (wilc_create_wiphy's caller), there is still a
wiphy_unregister in the failure path, which does not make sense anymore since
this function does not register wiphy anymore.

Once fixed: with this patch iw phy shows correctly on my platform that wilc3000
does not support SAE authenticate command while wilc1000 does. And wilc1000
still works correctly, even with wpa3.

Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Tested-on: WILC1000SD 07 SDIO WILC_WIFI_FW_REL_16_1_2
Tested-on: WILC3000 A SDIO WILC_WIFI_FW_REL_16_1_1

Thanks,

Alexis

-- 
Alexis Lothoré, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v7 7/7] wifi: wilc1000: Add WILC3000 support

[Alexis Lothoré]

On 10/3/24 13:14, Marek Vasut wrote:
> From: Ajay Singh <ajay.kathat@microchip.com>
> 
> Add support for the WILC3000 chip. The chip is similar to WILC1000,
> except that the register layout is slightly different and it does
> not support WPA3/SAE.
> 
> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
> Signed-off-by: Marek Vasut <marex@denx.de>


Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>

And for the basic feature set (basic sta scenario, basic ap scenario):

Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Tested-on: WILC1000SD 07 SDIO WILC_WIFI_FW_REL_16_1_2
Tested-on: WILC1000SD 07 SPI WILC_WIFI_FW_REL_16_1_2
Tested-on: WILC3000 A SDIO WILC_WIFI_FW_REL_16_1_1
Tested-on: WILC3000 A SPI WILC_WIFI_FW_REL_16_1_1

-- 
Alexis Lothoré, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v7 6/7] wifi: wilc1000: Register wiphy after reading out chipid

[Marek Vasut]

On 10/4/24 10:39 AM, Alexis Lothoré wrote:
> Hello Marek,

Hi,

> On 10/3/24 13:14, Marek Vasut wrote:
>> Register wiphy after reading out chipid, so the chipid can be
>> used to determine chip features and not advertise WPA3/SAE
>> support to userspace on WILC3000. Note that wilc_netdev_cleanup()
>> will deregister the wiphy in fail path.
>>
>> Signed-off-by: Marek Vasut <marex@denx.de>
> 
> [...]
> 
>> diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
>> index 11e0f8a473467..30015c5920467 100644
>> --- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c
>> +++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
>> @@ -1761,7 +1761,6 @@ static struct wilc *wilc_create_wiphy(struct device *dev)
>>   {
>>   	struct wiphy *wiphy;
>>   	struct wilc *wl;
>> -	int ret;
>>   
>>   	wiphy = wiphy_new(&wilc_cfg80211_ops, sizeof(*wl));
>>   	if (!wiphy)
>> @@ -1804,14 +1803,8 @@ static struct wilc *wilc_create_wiphy(struct device *dev)
>>   				BIT(NL80211_IFTYPE_P2P_GO) |
>>   				BIT(NL80211_IFTYPE_P2P_CLIENT);
>>   	wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
>> -	wiphy->features |= NL80211_FEATURE_SAE;
>>   	set_wiphy_dev(wiphy, dev);
>>   	wl->wiphy = wiphy;
>> -	ret = wiphy_register(wiphy);
> 
> I think you did not address one of my comment in v5 about this change: in
> wilc_cfg80211_init (wilc_create_wiphy's caller), there is still a
> wiphy_unregister in the failure path, which does not make sense anymore since
> this function does not register wiphy anymore.
> 
> Once fixed: with this patch iw phy shows correctly on my platform that wilc3000
> does not support SAE authenticate command while wilc1000 does. And wilc1000
> still works correctly, even with wpa3.
> 
> Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com>
> Tested-on: WILC1000SD 07 SDIO WILC_WIFI_FW_REL_16_1_2
> Tested-on: WILC3000 A SDIO WILC_WIFI_FW_REL_16_1_1
Fixed in V8, thank you.

Re: [PATCH v7 7/7] wifi: wilc1000: Add WILC3000 support

[Marek Vasut]

On 10/4/24 10:46 AM, Alexis Lothoré wrote:
> On 10/3/24 13:14, Marek Vasut wrote:
>> From: Ajay Singh <ajay.kathat@microchip.com>
>>
>> Add support for the WILC3000 chip. The chip is similar to WILC1000,
>> except that the register layout is slightly different and it does
>> not support WPA3/SAE.
>>
>> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
>> Signed-off-by: Marek Vasut <marex@denx.de>
> 
> 
> Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
> 
> And for the basic feature set (basic sta scenario, basic ap scenario):
> 
> Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com>
> Tested-on: WILC1000SD 07 SDIO WILC_WIFI_FW_REL_16_1_2
> Tested-on: WILC1000SD 07 SPI WILC_WIFI_FW_REL_16_1_2
> Tested-on: WILC3000 A SDIO WILC_WIFI_FW_REL_16_1_1
> Tested-on: WILC3000 A SPI WILC_WIFI_FW_REL_16_1_1
Thank you