On Fri, Oct 04, 2024 at 05:24:17PM +0200, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
> 
> Add fsl,pps-channel property to select where to connect the PPS signal.
> This depends on the internal SoC routing and on the board, for example
> on the i.MX8 SoC it can be connected to an external pin (using channel 1)
> or to internal eDMA as DMA request (channel 0).
> 
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>