* [PATCH net-next v2] dt-bindings: net: realtek: Use proper node names
@ 2024-10-04 8:08 Linus Walleij
2024-10-08 0:10 ` patchwork-bot+netdevbpf
0 siblings, 1 reply; 2+ messages in thread
From: Linus Walleij @ 2024-10-04 8:08 UTC (permalink / raw)
To: Alvin Šipraga, Andrew Lunn, Florian Fainelli,
Vladimir Oltean, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: netdev, devicetree, Krzysztof Kozlowski, Linus Walleij
We eventually want to get to a place where we fix all DTS files
so that we can simply disallow switch/port/ports without the
ethernet-* prefix so the DTS files are more readable.
Replace:
- switch with ethernet-switch
- ports with ethernet-ports
- port with ethernet-port
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Changes in v2:
- Rebased on v6.12-rc1
- Updated committ message.
- Link to v1: https://lore.kernel.org/r/20240208-realtek-bindings-fixup-v1-1-b1cf7f7e9eed@linaro.org
---
.../devicetree/bindings/net/dsa/realtek.yaml | 46 +++++++++++-----------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
index 70b6bda3cf98..f348e66fb515 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -147,7 +147,7 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
platform {
- switch {
+ ethernet-switch {
compatible = "realtek,rtl8366rb";
/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
@@ -163,35 +163,35 @@ examples:
#interrupt-cells = <1>;
};
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan0";
phy-handle = <&phy0>;
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&phy1>;
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan2";
phy-handle = <&phy2>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan3";
phy-handle = <&phy3>;
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "wan";
phy-handle = <&phy4>;
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
ethernet = <&gmac0>;
phy-mode = "rgmii";
@@ -241,7 +241,7 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
platform {
- switch {
+ ethernet-switch {
compatible = "realtek,rtl8365mb";
mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
@@ -255,30 +255,30 @@ examples:
#interrupt-cells = <1>;
};
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "swp0";
phy-handle = <ðphy0>;
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "swp1";
phy-handle = <ðphy1>;
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "swp2";
phy-handle = <ðphy2>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "swp3";
phy-handle = <ðphy3>;
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
ethernet = <&fec1>;
phy-mode = "rgmii";
@@ -330,7 +330,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- switch@29 {
+ ethernet-switch@29 {
compatible = "realtek,rtl8365mb";
reg = <29>;
@@ -344,36 +344,36 @@ examples:
#interrupt-cells = <1>;
};
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan4";
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan3";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan1";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "wan";
};
- port@7 {
+ ethernet-port@7 {
reg = <7>;
ethernet = <ðernet>;
phy-mode = "rgmii";
---
base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
change-id: 20240208-realtek-bindings-fixup-1d8ebaf19dba
Best regards,
--
Linus Walleij <linus.walleij@linaro.org>
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH net-next v2] dt-bindings: net: realtek: Use proper node names
2024-10-04 8:08 [PATCH net-next v2] dt-bindings: net: realtek: Use proper node names Linus Walleij
@ 2024-10-08 0:10 ` patchwork-bot+netdevbpf
0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+netdevbpf @ 2024-10-08 0:10 UTC (permalink / raw)
To: Linus Walleij
Cc: alsi, andrew, f.fainelli, olteanv, davem, edumazet, kuba, pabeni,
robh+dt, krzysztof.kozlowski+dt, conor+dt, netdev, devicetree,
krzysztof.kozlowski
Hello:
This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:
On Fri, 04 Oct 2024 10:08:50 +0200 you wrote:
> We eventually want to get to a place where we fix all DTS files
> so that we can simply disallow switch/port/ports without the
> ethernet-* prefix so the DTS files are more readable.
>
> Replace:
> - switch with ethernet-switch
> - ports with ethernet-ports
> - port with ethernet-port
>
> [...]
Here is the summary with links:
- [net-next,v2] dt-bindings: net: realtek: Use proper node names
https://git.kernel.org/netdev/net-next/c/7651f1149ace
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-10-08 0:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-10-04 8:08 [PATCH net-next v2] dt-bindings: net: realtek: Use proper node names Linus Walleij
2024-10-08 0:10 ` patchwork-bot+netdevbpf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).