From: Rob Herring <robh@kernel.org>
To: Francesco Dolcini <francesco@dolcini.it>
Cc: linux-kernel@vger.kernel.org,
Parth Pancholi <parth.pancholi@toradex.com>,
Mathias Nyman <mathias.nyman@intel.com>,
Francesco Dolcini <francesco.dolcini@toradex.com>,
devicetree@vger.kernel.org,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
linux-usb@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: Re: [PATCH v2 1/2] dt-bindings: usb: add TUSB73x0 PCIe
Date: Mon, 7 Oct 2024 10:44:46 -0500 [thread overview]
Message-ID: <20241007154446.GA726246-robh@kernel.org> (raw)
In-Reply-To: <20241007142920.GA60623@francesco-nb>
On Mon, Oct 07, 2024 at 04:29:20PM +0200, Francesco Dolcini wrote:
> Hello,
>
> On Mon, Oct 07, 2024 at 09:16:48AM -0500, Rob Herring (Arm) wrote:
> > On Mon, 07 Oct 2024 11:32:04 +0200, Francesco Dolcini wrote:
> > > From: Parth Pancholi <parth.pancholi@toradex.com>
> > >
> > > Add device tree bindings for TI's TUSB73x0 PCIe-to-USB 3.0 xHCI
> > > host controller. The controller supports software configuration
> > > through PCIe registers, such as controlling the PWRONx polarity
> > > via the USB control register (E0h).
> > >
> > > Similar generic PCIe-based bindings can be found as qcom,ath11k-pci.yaml
> > > as an example.
> > >
> > > Datasheet: https://www.ti.com/lit/ds/symlink/tusb7320.pdf
> > > Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
> > > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> > > ---
> > > v2: rename property to ti,tusb7320-pwron-active-high and change type to flag
> > > ---
> > > .../bindings/usb/ti,tusb73x0-pci.yaml | 60 +++++++++++++++++++
> > > 1 file changed, 60 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml
> > >
> >
> > My bot found errors running 'make dt_binding_check' on your patch:
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.example.dtb: pcie@0: usb@0:compatible: ['pci104C,8241'] does not contain items matching the given schema
> > from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml#
> >
> > doc reference errors (make refcheckdocs):
> >
> > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241007093205.27130-2-francesco@dolcini.it
> >
> > The base for the series is generally the latest rc1. A different dependency
> > should be noted in *this* patch.
> >
> > If you already ran 'make dt_binding_check' and didn't see the above
> > error(s), then make sure 'yamllint' is installed and dt-schema is up to
> > date:
> >
> > pip3 install dtschema --upgrade
>
> I do not have this error locally, and I am not sure I see the issue in
> the yaml file ...
>
> $ make dt_binding_check W=1 DT_SCHEMA_FILES=ti,tusb73x0-pci.yaml
DT_SCHEMA_FILES limits what is tested.
The issue is your compatible string should be lowercase hex.
Rob
next prev parent reply other threads:[~2024-10-07 15:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-07 9:32 [PATCH v2 0/2] USB: xhci: add support for PWRON polarity invert (TI TUSB73x0) Francesco Dolcini
2024-10-07 9:32 ` [PATCH v2 1/2] dt-bindings: usb: add TUSB73x0 PCIe Francesco Dolcini
2024-10-07 14:16 ` Rob Herring (Arm)
2024-10-07 14:29 ` Francesco Dolcini
2024-10-07 15:44 ` Rob Herring [this message]
2024-10-07 15:56 ` Francesco Dolcini
2024-10-07 9:32 ` [PATCH v2 2/2] USB: xhci: add support for PWRON active high Francesco Dolcini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241007154446.GA726246-robh@kernel.org \
--to=robh@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=francesco.dolcini@toradex.com \
--cc=francesco@dolcini.it \
--cc=gregkh@linuxfoundation.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=parth.pancholi@toradex.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).