[PATCH v3 1/6] dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings

["Théo Lebrun" <theo.lebrun@bootlin.com>]

After EyeQ5, it is time for Mobileye EyeQ6H to reuse the Nomadik I2C
controller. Add a specific compatible because its HW integration is
slightly different from EyeQ5.

Do NOT add an example as it looks like EyeQ5 from a DT standpoint
(without the mobileye,olb property).

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
index 44c54b162bb10741ec7aac70d165403c28176eba..7e84465c20094b799697a71a66c66d144d621f46 100644
--- a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
@@ -22,6 +22,7 @@ select:
         enum:
           - st,nomadik-i2c
           - mobileye,eyeq5-i2c
+          - mobileye,eyeq6h-i2c
   required:
     - compatible
 
@@ -29,15 +30,15 @@ properties:
   compatible:
     oneOf:
       - items:
-          - const: st,nomadik-i2c
+          - enum:
+              - st,nomadik-i2c
+              - mobileye,eyeq5-i2c
+              - mobileye,eyeq6h-i2c
           - const: arm,primecell
       - items:
           - const: stericsson,db8500-i2c
           - const: st,nomadik-i2c
           - const: arm,primecell
-      - items:
-          - const: mobileye,eyeq5-i2c
-          - const: arm,primecell
 
   reg:
     maxItems: 1
@@ -54,7 +55,7 @@ properties:
       - items:
           - const: mclk
           - const: apb_pclk
-      # Clock name in DB8500 or EyeQ5
+      # Clock name in DB8500 or EyeQ
       - items:
           - const: i2cclk
           - const: apb_pclk

-- 
2.46.2