Re: [PATCH v2] dt-bindings: leds: Document "rc-feedback" trigger

[Lee Jones <lee@kernel.org>]

On Mon, 07 Oct 2024, Heiko Stuebner wrote:

> Document the "rc-feedback" trigger which is used to control LEDs by
> remote control device activity. This is an existing trigger used in
> existing DTs, document it so validation of those DTs would pass.
> 
> It was originally introduced into the Linux kernel in 2013 with
> commit 153a60bb0fac ("[media] rc: add feedback led trigger for rc keypresses")
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> changes in v2:
> - put the entry in the correct position and comment above it (Pavel)
> 
>  Documentation/devicetree/bindings/leds/common.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
> index bf9a101e4d42..9cd89f30fa7c 100644
> --- a/Documentation/devicetree/bindings/leds/common.yaml
> +++ b/Documentation/devicetree/bindings/leds/common.yaml
> @@ -118,6 +118,8 @@ properties:
>              # No trigger assigned to the LED. This is the default mode
>              # if trigger is absent
>            - none
> +            # LED indicates remote control feedback
> +          - rc-feedback

Is 'rc' a recognised and well known abbreviation for remote control?

How about we people some (look-up) time and say:

  - remote-control-feedback

?

>              # LED indicates camera torch state
>            - torch
>              # LED indicates USB gadget activity
> -- 
> 2.43.0
> 

-- 
Lee Jones [李琼斯]