From: Amelie Delaunay <amelie.delaunay@foss.st.com>
To: Vinod Koul <vkoul@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: <dmaengine@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Amelie Delaunay <amelie.delaunay@foss.st.com>
Subject: [PATCH 00/11] STM32 DMA3 updates for STM32MP25
Date: Thu, 10 Oct 2024 16:27:50 +0200 [thread overview]
Message-ID: <20241010-dma3-mp25-updates-v1-0-adf0633981ea@foss.st.com> (raw)
The HW version of STM32 DMA3 inside STM32MP25 requires some tunings to
meet the needs of the interconnect. This series adds the linked list
refactoring feature to have optimal performance when addressing the
memory, and it adds the use of two new bits in the third cell specifying
the DMA transfer requirements:
- bit[16] to prevent packing/unpacking mode to avoid bytes loss in case
of interrupting an ongoing transfer (e.g. UART RX)i,
- bit[17] to prevent linked-list refactoring because some peripherals
(e.g. FMC ECC) require a one-shot transfer, they trigger the DMA only
once.
It also adds a new property, st,axi-max-burst-len, to clamp the burst
length when AXI port is used.
Finally this series also contains STM32MP25 device tree updates, to add
DMA support on SPI, I2C, UART and apply the tunings introduced.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
Amelie Delaunay (11):
dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode
dmaengine: stm32-dma3: prevent pack/unpack thanks to DT configuration
dmaengine: stm32-dma3: refactor HW linked-list to optimize memory accesses
dt-bindings: dma: stm32-dma3: prevent linked-list refactoring
dmaengine: stm32-dma3: prevent LL refactoring thanks to DT configuration
dt-bindings: dma: stm32-dma3: introduce st,axi-max-burst-len property
dmaengine: stm32-dma3: clamp AXI burst using st,axi-max-burst-len
arm64: dts: st: limit axi burst length in dma nodes of stm32mp25
arm64: dts: st: add DMA support on U(S)ART instances of stm32mp25
arm64: dts: st: add DMA support on I2C instances of stm32mp25
arm64: dts: st: add DMA support on SPI instances of stm32mp25
.../bindings/dma/stm32/st,stm32-dma3.yaml | 17 ++++
arch/arm64/boot/dts/st/stm32mp251.dtsi | 78 +++++++++++++++
arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 2 +
drivers/dma/stm32/stm32-dma3.c | 107 +++++++++++++++++----
4 files changed, 185 insertions(+), 19 deletions(-)
---
base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
change-id: 20241010-dma3-mp25-updates-46b9e720290b
Best regards,
--
Amelie Delaunay <amelie.delaunay@foss.st.com>
next reply other threads:[~2024-10-10 14:31 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-10 14:27 Amelie Delaunay [this message]
2024-10-10 14:27 ` [PATCH 01/11] dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode Amelie Delaunay
2024-10-10 18:11 ` Rob Herring (Arm)
2024-10-10 14:27 ` [PATCH 02/11] dmaengine: stm32-dma3: prevent pack/unpack thanks to DT configuration Amelie Delaunay
2024-10-10 14:27 ` [PATCH 03/11] dmaengine: stm32-dma3: refactor HW linked-list to optimize memory accesses Amelie Delaunay
2024-10-10 14:27 ` [PATCH 04/11] dt-bindings: dma: stm32-dma3: prevent linked-list refactoring Amelie Delaunay
2024-10-10 18:14 ` Rob Herring
2024-10-11 9:01 ` Amelie Delaunay
2024-10-10 14:27 ` [PATCH 05/11] dmaengine: stm32-dma3: prevent LL refactoring thanks to DT configuration Amelie Delaunay
2024-10-10 14:27 ` [PATCH 06/11] dt-bindings: dma: stm32-dma3: introduce st,axi-max-burst-len property Amelie Delaunay
2024-10-10 18:16 ` Rob Herring
2024-10-11 9:12 ` Amelie Delaunay
2024-10-10 14:27 ` [PATCH 07/11] dmaengine: stm32-dma3: clamp AXI burst using st,axi-max-burst-len Amelie Delaunay
2024-10-10 14:27 ` [PATCH 08/11] arm64: dts: st: limit axi burst length in dma nodes of stm32mp25 Amelie Delaunay
2024-10-10 14:27 ` [PATCH 09/11] arm64: dts: st: add DMA support on U(S)ART instances " Amelie Delaunay
2024-10-10 14:28 ` [PATCH 10/11] arm64: dts: st: add DMA support on I2C " Amelie Delaunay
2024-10-10 14:28 ` [PATCH 11/11] arm64: dts: st: add DMA support on SPI " Amelie Delaunay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241010-dma3-mp25-updates-v1-0-adf0633981ea@foss.st.com \
--to=amelie.delaunay@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).