From: Amelie Delaunay <amelie.delaunay@foss.st.com>
To: Vinod Koul <vkoul@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: <dmaengine@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Amelie Delaunay <amelie.delaunay@foss.st.com>
Subject: [PATCH 10/11] arm64: dts: st: add DMA support on I2C instances of stm32mp25
Date: Thu, 10 Oct 2024 16:28:00 +0200 [thread overview]
Message-ID: <20241010-dma3-mp25-updates-v1-10-adf0633981ea@foss.st.com> (raw)
In-Reply-To: <20241010-dma3-mp25-updates-v1-0-adf0633981ea@foss.st.com>
Add dmas and dma-names properties in i2c nodes of stm32mp251.dtsi to
enable DMA support.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
arch/arm64/boot/dts/st/stm32mp251.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 02fcb9fcff87ba9d5c1ecab0385e3a57cde31e2e..033da03d05a72c557dd81547fffa54eefed1e9cd 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -321,6 +321,9 @@ i2c1: i2c@40120000 {
resets = <&rcc I2C1_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&hpdma 27 0x20 0x3012>,
+ <&hpdma 28 0x20 0x3021>;
+ dma-names = "rx", "tx";
access-controllers = <&rifsc 41>;
status = "disabled";
};
@@ -334,6 +337,9 @@ i2c2: i2c@40130000 {
resets = <&rcc I2C2_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&hpdma 30 0x20 0x3012>,
+ <&hpdma 31 0x20 0x3021>;
+ dma-names = "rx", "tx";
access-controllers = <&rifsc 42>;
status = "disabled";
};
@@ -347,6 +353,9 @@ i2c3: i2c@40140000 {
resets = <&rcc I2C3_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&hpdma 33 0x20 0x3012>,
+ <&hpdma 34 0x20 0x3021>;
+ dma-names = "rx", "tx";
access-controllers = <&rifsc 43>;
status = "disabled";
};
@@ -360,6 +369,9 @@ i2c4: i2c@40150000 {
resets = <&rcc I2C4_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&hpdma 36 0x20 0x3012>,
+ <&hpdma 37 0x20 0x3021>;
+ dma-names = "rx", "tx";
access-controllers = <&rifsc 44>;
status = "disabled";
};
@@ -373,6 +385,9 @@ i2c5: i2c@40160000 {
resets = <&rcc I2C5_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&hpdma 39 0x20 0x3012>,
+ <&hpdma 40 0x20 0x3021>;
+ dma-names = "rx", "tx";
access-controllers = <&rifsc 45>;
status = "disabled";
};
@@ -386,6 +401,9 @@ i2c6: i2c@40170000 {
resets = <&rcc I2C6_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&hpdma 42 0x20 0x3012>,
+ <&hpdma 43 0x20 0x3021>;
+ dma-names = "rx", "tx";
access-controllers = <&rifsc 46>;
status = "disabled";
};
@@ -399,6 +417,9 @@ i2c7: i2c@40180000 {
resets = <&rcc I2C7_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&hpdma 45 0x20 0x3012>,
+ <&hpdma 46 0x20 0x3021>;
+ dma-names = "rx", "tx";
access-controllers = <&rifsc 47>;
status = "disabled";
};
@@ -544,6 +565,9 @@ i2c8: i2c@46040000 {
resets = <&rcc I2C8_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&hpdma 168 0x20 0x3012>,
+ <&hpdma 169 0x20 0x3021>;
+ dma-names = "rx", "tx";
access-controllers = <&rifsc 48>;
status = "disabled";
};
--
2.25.1
next prev parent reply other threads:[~2024-10-10 14:31 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-10 14:27 [PATCH 00/11] STM32 DMA3 updates for STM32MP25 Amelie Delaunay
2024-10-10 14:27 ` [PATCH 01/11] dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode Amelie Delaunay
2024-10-10 18:11 ` Rob Herring (Arm)
2024-10-10 14:27 ` [PATCH 02/11] dmaengine: stm32-dma3: prevent pack/unpack thanks to DT configuration Amelie Delaunay
2024-10-10 14:27 ` [PATCH 03/11] dmaengine: stm32-dma3: refactor HW linked-list to optimize memory accesses Amelie Delaunay
2024-10-10 14:27 ` [PATCH 04/11] dt-bindings: dma: stm32-dma3: prevent linked-list refactoring Amelie Delaunay
2024-10-10 18:14 ` Rob Herring
2024-10-11 9:01 ` Amelie Delaunay
2024-10-10 14:27 ` [PATCH 05/11] dmaengine: stm32-dma3: prevent LL refactoring thanks to DT configuration Amelie Delaunay
2024-10-10 14:27 ` [PATCH 06/11] dt-bindings: dma: stm32-dma3: introduce st,axi-max-burst-len property Amelie Delaunay
2024-10-10 18:16 ` Rob Herring
2024-10-11 9:12 ` Amelie Delaunay
2024-10-10 14:27 ` [PATCH 07/11] dmaengine: stm32-dma3: clamp AXI burst using st,axi-max-burst-len Amelie Delaunay
2024-10-10 14:27 ` [PATCH 08/11] arm64: dts: st: limit axi burst length in dma nodes of stm32mp25 Amelie Delaunay
2024-10-10 14:27 ` [PATCH 09/11] arm64: dts: st: add DMA support on U(S)ART instances " Amelie Delaunay
2024-10-10 14:28 ` Amelie Delaunay [this message]
2024-10-10 14:28 ` [PATCH 11/11] arm64: dts: st: add DMA support on SPI " Amelie Delaunay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241010-dma3-mp25-updates-v1-10-adf0633981ea@foss.st.com \
--to=amelie.delaunay@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).