[PATCH v2 3/6] EDAC/fsl_ddr: Fix bad bit shift operations

[Frank Li <Frank.Li@nxp.com>]

From: Priyanka Singh <priyanka.singh@nxp.com>

Fix undefined behavior caused by left-shifting a negative value in the
expression:

    cap_high ^ (1 << (bad_data_bit - 32))

The variable `bad_data_bit` ranges from 0 to 63. When `bad_data_bit` is
less than 32, `bad_data_bit - 32` becomes negative, and left-shifting by a
negative value in C is undefined behavior.

Fix this by checking the range of `bad_data_bit` before performing the
shift.

Fixes: ea2eb9a8b620 ("EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx")
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/edac/fsl_ddr_edac.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/edac/fsl_ddr_edac.c b/drivers/edac/fsl_ddr_edac.c
index 7a9fb1202f1a0..ccc13c2adfd6f 100644
--- a/drivers/edac/fsl_ddr_edac.c
+++ b/drivers/edac/fsl_ddr_edac.c
@@ -338,11 +338,18 @@ static void fsl_mc_check(struct mem_ctl_info *mci)
 			fsl_mc_printk(mci, KERN_ERR,
 				"Faulty ECC bit: %d\n", bad_ecc_bit);
 
-		fsl_mc_printk(mci, KERN_ERR,
-			"Expected Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
-			cap_high ^ (1 << (bad_data_bit - 32)),
-			cap_low ^ (1 << bad_data_bit),
-			syndrome ^ (1 << bad_ecc_bit));
+		if ((bad_data_bit > 0 && bad_data_bit < 32) && bad_ecc_bit > 0) {
+			fsl_mc_printk(mci, KERN_ERR,
+				      "Expected Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
+				      cap_high, cap_low ^ (1 << bad_data_bit),
+				      syndrome ^ (1 << bad_ecc_bit));
+		}
+		if (bad_data_bit >= 32 && bad_ecc_bit > 0) {
+			fsl_mc_printk(mci, KERN_ERR,
+				      "Expected Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
+				      cap_high ^ (1 << (bad_data_bit - 32)),
+				      cap_low, syndrome ^ (1 << bad_ecc_bit));
+		}
 	}
 
 	fsl_mc_printk(mci, KERN_ERR,

-- 
2.34.1