[PATCH v3 5/6] arm64: dts: imx8qm: add node for VPU dsp

[Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>]

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Add DT node for i.MX8QM's DSP, which is found in the VPU subsystem.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qm.dtsi | 26 +++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index f8b577ebdbef..74857a94bcd3 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -581,6 +581,32 @@ mipi_pll_div2_clk: clock-controller-mipi-div2-pll {
 		clock-output-names = "mipi_pll_div2_clk";
 	};
 
+	vpu_subsys_dsp: bus@55000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x55000000 0x0 0x55000000 0x1000000>;
+
+		vpu_dsp: dsp@556e8000 {
+			compatible = "fsl,imx8qm-hifi4";
+			reg = <0x556e8000 0x88000>;
+			clocks = <&clk_dummy>,
+				 <&clk_dummy>,
+				 <&clk_dummy>;
+			clock-names = "ipg", "ocram", "core";
+			power-domains = <&pd IMX_SC_R_MU_13B>,
+					<&pd IMX_SC_R_DSP>,
+					<&pd IMX_SC_R_DSP_RAM>,
+					<&pd IMX_SC_R_MU_2A>;
+			mbox-names = "tx", "rx", "rxdb";
+			mboxes = <&lsio_mu13 0 0>,
+				 <&lsio_mu13 1 0>,
+				 <&lsio_mu13 3 0>;
+			firmware-name = "imx/dsp/hifi4.bin";
+			status = "disabled";
+		};
+	};
+
 	/* sorted in register address */
 	#include "imx8-ss-cm41.dtsi"
 	#include "imx8-ss-audio.dtsi"
-- 
2.34.1