From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 4/5] arm64: dts: qcom: x1e80100-crd: add rtc offset to set rtc time
Date: Fri, 11 Oct 2024 11:22:42 -0400 [thread overview]
Message-ID: <20241011152244.31267-4-jonathan@marek.ca> (raw)
In-Reply-To: <20241011152244.31267-1-jonathan@marek.ca>
See commit e67b45582c5e for explanation.
Note: the 0xbc offset is arbitrary, it just needs to not be already in use.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 53e76b3f0c831..c8fac0f2701b9 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -1224,6 +1224,17 @@ edp_bl_en: edp-bl-en-state {
};
};
+&pmk8550_rtc {
+ nvmem-cells = <&rtc_offset>;
+ nvmem-cell-names = "offset";
+};
+
+&pmk8550_sdam_2 {
+ rtc_offset: rtc-offset@bc {
+ reg = <0xbc 0x4>;
+ };
+};
+
&qupv3_0 {
status = "okay";
};
--
2.45.1
next prev parent reply other threads:[~2024-10-11 15:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20241011152244.31267-1-jonathan@marek.ca>
2024-10-11 15:22 ` [PATCH 2/5] dt-bindings: rtc: qcom-pm8xxx: document no-alarm flag Jonathan Marek
2024-10-11 15:22 ` [PATCH 3/5] arm64: dts: qcom: x1e80100-pmics: enable RTC Jonathan Marek
2024-10-11 15:22 ` Jonathan Marek [this message]
2024-10-11 15:22 ` [PATCH 5/5] arm64: dts: qcom: x1e78100-t14s: add rtc offset to set rtc time Jonathan Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241011152244.31267-4-jonathan@marek.ca \
--to=jonathan@marek.ca \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).