* [PATCH] arm64: dts: qcom: x1e80100: Force host dr_mode for usb_2 controller
@ 2024-10-14 14:14 Abel Vesa
2024-10-14 15:48 ` neil.armstrong
0 siblings, 1 reply; 3+ messages in thread
From: Abel Vesa @ 2024-10-14 14:14 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: Johan Hovold, Dmitry Baryshkov, linux-arm-msm, devicetree,
linux-kernel, Abel Vesa
The usb_2 controller has only a USB 2.0 PHY connected to it. There is no
USB 3.x PHY fot it. So since dual-role is not an option, explicitly set
the dr_mode to host to match the hardware.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 0e6802c1d2d8375987c614ec69c440e2f38d25c6..4da13c8472392d842442193dc740027fa011ee1f 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -4143,6 +4143,7 @@ usb_2_dwc3: usb@a200000 {
iommus = <&apps_smmu 0x14e0 0x0>;
phys = <&usb_2_hsphy>;
phy-names = "usb2-phy";
+ dr_mode = "host";
maximum-speed = "high-speed";
ports {
---
base-commit: d61a00525464bfc5fe92c6ad713350988e492b88
change-id: 20241014-x1e80100-usb2-dwc3-set-dr-mode-host-35312d1d25b2
Best regards,
--
Abel Vesa <abel.vesa@linaro.org>
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: qcom: x1e80100: Force host dr_mode for usb_2 controller
2024-10-14 14:14 [PATCH] arm64: dts: qcom: x1e80100: Force host dr_mode for usb_2 controller Abel Vesa
@ 2024-10-14 15:48 ` neil.armstrong
2024-10-14 18:16 ` Abel Vesa
0 siblings, 1 reply; 3+ messages in thread
From: neil.armstrong @ 2024-10-14 15:48 UTC (permalink / raw)
To: Abel Vesa, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: Johan Hovold, Dmitry Baryshkov, linux-arm-msm, devicetree,
linux-kernel
On 14/10/2024 16:14, Abel Vesa wrote:
> The usb_2 controller has only a USB 2.0 PHY connected to it. There is no
> USB 3.x PHY fot it. So since dual-role is not an option, explicitly set
> the dr_mode to host to match the hardware.
I don't follow, dual role is perfectly possible with USB2 only, where is the limitation ?
Neil
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/x1e80100.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> index 0e6802c1d2d8375987c614ec69c440e2f38d25c6..4da13c8472392d842442193dc740027fa011ee1f 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -4143,6 +4143,7 @@ usb_2_dwc3: usb@a200000 {
> iommus = <&apps_smmu 0x14e0 0x0>;
> phys = <&usb_2_hsphy>;
> phy-names = "usb2-phy";
> + dr_mode = "host";
> maximum-speed = "high-speed";
>
> ports {
>
> ---
> base-commit: d61a00525464bfc5fe92c6ad713350988e492b88
> change-id: 20241014-x1e80100-usb2-dwc3-set-dr-mode-host-35312d1d25b2
>
> Best regards,
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: qcom: x1e80100: Force host dr_mode for usb_2 controller
2024-10-14 15:48 ` neil.armstrong
@ 2024-10-14 18:16 ` Abel Vesa
0 siblings, 0 replies; 3+ messages in thread
From: Abel Vesa @ 2024-10-14 18:16 UTC (permalink / raw)
To: neil.armstrong
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Johan Hovold, Dmitry Baryshkov, linux-arm-msm,
devicetree, linux-kernel
On 24-10-14 17:48:37, neil.armstrong@linaro.org wrote:
> On 14/10/2024 16:14, Abel Vesa wrote:
> > The usb_2 controller has only a USB 2.0 PHY connected to it. There is no
> > USB 3.x PHY fot it. So since dual-role is not an option, explicitly set
> > the dr_mode to host to match the hardware.
>
> I don't follow, dual role is perfectly possible with USB2 only, where is the limitation ?
You're right. USB2 could be OTG.
Consider this patch dropped.
>
> Neil
>
> >
> > Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> > ---
> > arch/arm64/boot/dts/qcom/x1e80100.dtsi | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> > index 0e6802c1d2d8375987c614ec69c440e2f38d25c6..4da13c8472392d842442193dc740027fa011ee1f 100644
> > --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> > @@ -4143,6 +4143,7 @@ usb_2_dwc3: usb@a200000 {
> > iommus = <&apps_smmu 0x14e0 0x0>;
> > phys = <&usb_2_hsphy>;
> > phy-names = "usb2-phy";
> > + dr_mode = "host";
> > maximum-speed = "high-speed";
> > ports {
> >
> > ---
> > base-commit: d61a00525464bfc5fe92c6ad713350988e492b88
> > change-id: 20241014-x1e80100-usb2-dwc3-set-dr-mode-host-35312d1d25b2
> >
> > Best regards,
>
Thanks for reviewing.
Abel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-10-14 18:16 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-10-14 14:14 [PATCH] arm64: dts: qcom: x1e80100: Force host dr_mode for usb_2 controller Abel Vesa
2024-10-14 15:48 ` neil.armstrong
2024-10-14 18:16 ` Abel Vesa
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).