[PATCH 3/4] arm64: dts: ti: k3-am64-main: Add ti,pruss-pa-st node

[MD Danish Anwar <danishanwar@ti.com>]

Add pa-stats nodes to k3-am64-main.dtsi for all ICSSG instances.
This is needed to dump IET related statistics for ICSSG Driver.

Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 7eae18399caa..82cd910e06b8 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -1261,6 +1261,11 @@ icssg0_mii_g_rt: mii-g-rt@33000 {
 			reg = <0x33000 0x1000>;
 		};
 
+		icssg0_pa_stats: pa-stats@2c000 {
+			compatible = "ti,pruss-pa-st", "syscon";
+			reg = <0x2c000 0x1000>;
+		};
+
 		icssg0_intc: interrupt-controller@20000 {
 			compatible = "ti,icssg-intc";
 			reg = <0x20000 0x2000>;
@@ -1426,6 +1431,11 @@ icssg1_mii_g_rt: mii-g-rt@33000 {
 			reg = <0x33000 0x1000>;
 		};
 
+		icssg1_pa_stats: pa-stats@2c000 {
+			compatible = "ti,pruss-pa-st", "syscon";
+			reg = <0x2c000 0x1000>;
+		};
+
 		icssg1_intc: interrupt-controller@20000 {
 			compatible = "ti,icssg-intc";
 			reg = <0x20000 0x2000>;
-- 
2.34.1