From: Gatien Chevallier <gatien.chevallier@foss.st.com>
To: Olivia Mackall <olivia@selenic.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Lionel Debieve <lionel.debieve@foss.st.com>, <marex@denx.de>
Cc: <linux-crypto@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Gatien Chevallier <gatien.chevallier@foss.st.com>
Subject: [PATCH v3 2/4] hwrng: stm32 - implement support for STM32MP25x platforms
Date: Tue, 15 Oct 2024 18:48:55 +0200 [thread overview]
Message-ID: <20241015-rng-mp25-v2-v3-2-87630d73e5eb@foss.st.com> (raw)
In-Reply-To: <20241015-rng-mp25-v2-v3-0-87630d73e5eb@foss.st.com>
Implement the support for STM32MP25x platforms. On this platform, a
security clock is shared between some hardware blocks. For the RNG,
it is the RNG kernel clock. Therefore, the gate is no more shared
between the RNG bus and kernel clocks as on STM32MP1x platforms and
the bus clock has to be managed on its own.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
---
Changes in V3:
- Use clk_bulk APIs in the RNG driver to avoid manually handling
clocks.
Changes in V2
-Renamed RNG clocks to "core" and "bus"
-Use clk_bulk_* APIs instead of handling each clock. Just make
sure that the RNG core clock is first
---
drivers/char/hw_random/stm32-rng.c | 74 ++++++++++++++++++++++++++++----------
1 file changed, 56 insertions(+), 18 deletions(-)
diff --git a/drivers/char/hw_random/stm32-rng.c b/drivers/char/hw_random/stm32-rng.c
index 9d041a67c295a54d283d235bbcf5a9ab7a8baa5c..279328902bf89af15b8ca9df9a061bf2a1ddcf55 100644
--- a/drivers/char/hw_random/stm32-rng.c
+++ b/drivers/char/hw_random/stm32-rng.c
@@ -4,6 +4,7 @@
*/
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/hw_random.h>
#include <linux/io.h>
@@ -49,6 +50,7 @@
struct stm32_rng_data {
uint max_clock_rate;
+ uint nb_clock;
u32 cr;
u32 nscr;
u32 htcr;
@@ -72,7 +74,7 @@ struct stm32_rng_private {
struct hwrng rng;
struct device *dev;
void __iomem *base;
- struct clk *clk;
+ struct clk_bulk_data *clk_bulk;
struct reset_control *rst;
struct stm32_rng_config pm_conf;
const struct stm32_rng_data *data;
@@ -266,7 +268,7 @@ static uint stm32_rng_clock_freq_restrain(struct hwrng *rng)
unsigned long clock_rate = 0;
uint clock_div = 0;
- clock_rate = clk_get_rate(priv->clk);
+ clock_rate = clk_get_rate(priv->clk_bulk[0].clk);
/*
* Get the exponent to apply on the CLKDIV field in RNG_CR register
@@ -276,7 +278,7 @@ static uint stm32_rng_clock_freq_restrain(struct hwrng *rng)
while ((clock_rate >> clock_div) > priv->data->max_clock_rate)
clock_div++;
- pr_debug("RNG clk rate : %lu\n", clk_get_rate(priv->clk) >> clock_div);
+ pr_debug("RNG clk rate : %lu\n", clk_get_rate(priv->clk_bulk[0].clk) >> clock_div);
return clock_div;
}
@@ -288,7 +290,7 @@ static int stm32_rng_init(struct hwrng *rng)
int err;
u32 reg;
- err = clk_prepare_enable(priv->clk);
+ err = clk_bulk_prepare_enable(priv->data->nb_clock, priv->clk_bulk);
if (err)
return err;
@@ -328,7 +330,7 @@ static int stm32_rng_init(struct hwrng *rng)
(!(reg & RNG_CR_CONDRST)),
10, 50000);
if (err) {
- clk_disable_unprepare(priv->clk);
+ clk_bulk_disable_unprepare(priv->data->nb_clock, priv->clk_bulk);
dev_err(priv->dev, "%s: timeout %x!\n", __func__, reg);
return -EINVAL;
}
@@ -356,12 +358,13 @@ static int stm32_rng_init(struct hwrng *rng)
reg & RNG_SR_DRDY,
10, 100000);
if (err || (reg & ~RNG_SR_DRDY)) {
- clk_disable_unprepare(priv->clk);
+ clk_bulk_disable_unprepare(priv->data->nb_clock, priv->clk_bulk);
dev_err(priv->dev, "%s: timeout:%x SR: %x!\n", __func__, err, reg);
+
return -EINVAL;
}
- clk_disable_unprepare(priv->clk);
+ clk_bulk_disable_unprepare(priv->data->nb_clock, priv->clk_bulk);
return 0;
}
@@ -379,7 +382,8 @@ static int __maybe_unused stm32_rng_runtime_suspend(struct device *dev)
reg = readl_relaxed(priv->base + RNG_CR);
reg &= ~RNG_CR_RNGEN;
writel_relaxed(reg, priv->base + RNG_CR);
- clk_disable_unprepare(priv->clk);
+
+ clk_bulk_disable_unprepare(priv->data->nb_clock, priv->clk_bulk);
return 0;
}
@@ -389,7 +393,7 @@ static int __maybe_unused stm32_rng_suspend(struct device *dev)
struct stm32_rng_private *priv = dev_get_drvdata(dev);
int err;
- err = clk_prepare_enable(priv->clk);
+ err = clk_bulk_prepare_enable(priv->data->nb_clock, priv->clk_bulk);
if (err)
return err;
@@ -403,7 +407,7 @@ static int __maybe_unused stm32_rng_suspend(struct device *dev)
writel_relaxed(priv->pm_conf.cr, priv->base + RNG_CR);
- clk_disable_unprepare(priv->clk);
+ clk_bulk_disable_unprepare(priv->data->nb_clock, priv->clk_bulk);
return 0;
}
@@ -414,7 +418,7 @@ static int __maybe_unused stm32_rng_runtime_resume(struct device *dev)
int err;
u32 reg;
- err = clk_prepare_enable(priv->clk);
+ err = clk_bulk_prepare_enable(priv->data->nb_clock, priv->clk_bulk);
if (err)
return err;
@@ -434,7 +438,7 @@ static int __maybe_unused stm32_rng_resume(struct device *dev)
int err;
u32 reg;
- err = clk_prepare_enable(priv->clk);
+ err = clk_bulk_prepare_enable(priv->data->nb_clock, priv->clk_bulk);
if (err)
return err;
@@ -462,7 +466,7 @@ static int __maybe_unused stm32_rng_resume(struct device *dev)
reg & ~RNG_CR_CONDRST, 10, 100000);
if (err) {
- clk_disable_unprepare(priv->clk);
+ clk_bulk_disable_unprepare(priv->data->nb_clock, priv->clk_bulk);
dev_err(priv->dev, "%s: timeout:%x CR: %x!\n", __func__, err, reg);
return -EINVAL;
}
@@ -472,7 +476,7 @@ static int __maybe_unused stm32_rng_resume(struct device *dev)
writel_relaxed(reg, priv->base + RNG_CR);
}
- clk_disable_unprepare(priv->clk);
+ clk_bulk_disable_unprepare(priv->data->nb_clock, priv->clk_bulk);
return 0;
}
@@ -484,9 +488,19 @@ static const struct dev_pm_ops __maybe_unused stm32_rng_pm_ops = {
stm32_rng_resume)
};
+static const struct stm32_rng_data stm32mp25_rng_data = {
+ .has_cond_reset = true,
+ .max_clock_rate = 48000000,
+ .nb_clock = 2,
+ .cr = 0x00F00D00,
+ .nscr = 0x2B5BB,
+ .htcr = 0x969D,
+};
+
static const struct stm32_rng_data stm32mp13_rng_data = {
.has_cond_reset = true,
.max_clock_rate = 48000000,
+ .nb_clock = 1,
.cr = 0x00F00D00,
.nscr = 0x2B5BB,
.htcr = 0x969D,
@@ -495,9 +509,14 @@ static const struct stm32_rng_data stm32mp13_rng_data = {
static const struct stm32_rng_data stm32_rng_data = {
.has_cond_reset = false,
.max_clock_rate = 3000000,
+ .nb_clock = 1,
};
static const struct of_device_id stm32_rng_match[] = {
+ {
+ .compatible = "st,stm32mp25-rng",
+ .data = &stm32mp25_rng_data,
+ },
{
.compatible = "st,stm32mp13-rng",
.data = &stm32mp13_rng_data,
@@ -516,6 +535,7 @@ static int stm32_rng_probe(struct platform_device *ofdev)
struct device_node *np = ofdev->dev.of_node;
struct stm32_rng_private *priv;
struct resource *res;
+ int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -525,10 +545,6 @@ static int stm32_rng_probe(struct platform_device *ofdev)
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
- priv->clk = devm_clk_get(&ofdev->dev, NULL);
- if (IS_ERR(priv->clk))
- return PTR_ERR(priv->clk);
-
priv->rst = devm_reset_control_get(&ofdev->dev, NULL);
if (!IS_ERR(priv->rst)) {
reset_control_assert(priv->rst);
@@ -551,6 +567,28 @@ static int stm32_rng_probe(struct platform_device *ofdev)
priv->rng.read = stm32_rng_read;
priv->rng.quality = 900;
+ if (!priv->data->nb_clock || priv->data->nb_clock > 2)
+ return -EINVAL;
+
+ ret = devm_clk_bulk_get_all(dev, &priv->clk_bulk);
+ if (ret != priv->data->nb_clock)
+ return dev_err_probe(dev, -EINVAL, "Failed to get clocks: %d\n", ret);
+
+ if (priv->data->nb_clock == 2) {
+ const char *id = priv->clk_bulk[1].id;
+ struct clk *clk = priv->clk_bulk[1].clk;
+
+ if (!priv->clk_bulk[0].id || !priv->clk_bulk[1].id)
+ return dev_err_probe(dev, -EINVAL, "Missing clock name\n");
+
+ if (strcmp(priv->clk_bulk[0].id, "core")) {
+ priv->clk_bulk[1].id = priv->clk_bulk[0].id;
+ priv->clk_bulk[1].clk = priv->clk_bulk[0].clk;
+ priv->clk_bulk[0].id = id;
+ priv->clk_bulk[0].clk = clk;
+ }
+ }
+
pm_runtime_set_autosuspend_delay(dev, 100);
pm_runtime_use_autosuspend(dev);
pm_runtime_enable(dev);
--
2.25.1
next prev parent reply other threads:[~2024-10-15 16:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-15 16:48 [PATCH v3 0/4] Add support for stm32mp25x RNG Gatien Chevallier
2024-10-15 16:48 ` [PATCH v3 1/4] dt-bindings: rng: add st,stm32mp25-rng support Gatien Chevallier
2024-10-15 22:17 ` Rob Herring
2024-10-16 7:49 ` Gatien CHEVALLIER
2024-10-16 8:00 ` Gatien CHEVALLIER
2024-10-15 16:48 ` Gatien Chevallier [this message]
2024-10-15 16:57 ` [PATCH v3 2/4] hwrng: stm32 - implement support for STM32MP25x platforms Marek Vasut
2024-10-15 16:48 ` [PATCH v3 3/4] hwrng: stm32 - update STM32MP15 RNG max clock frequency Gatien Chevallier
2024-10-15 16:48 ` [PATCH v3 4/4] arm64: dts: st: add RNG node on stm32mp251 Gatien Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241015-rng-mp25-v2-v3-2-87630d73e5eb@foss.st.com \
--to=gatien.chevallier@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=lionel.debieve@foss.st.com \
--cc=marex@denx.de \
--cc=mcoquelin.stm32@gmail.com \
--cc=olivia@selenic.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).