From: Troy Mitchell <troymitchell988@gmail.com>
To: andi.shyti@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org
Cc: troymitchell988@gmail.com, linux-i2c@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 1/2] dt-bindings: i2c: spacemit: add support for K1 SoC
Date: Tue, 15 Oct 2024 15:51:33 +0800 [thread overview]
Message-ID: <20241015075134.1449458-2-TroyMitchell988@gmail.com> (raw)
In-Reply-To: <20241015075134.1449458-1-TroyMitchell988@gmail.com>
The i2c of K1 supports fast-speed-mode and high-speed-mode,
and supports FIFO transmission.
Signed-off-by: Troy Mitchell <TroyMitchell988@gmail.com>
---
.../bindings/i2c/spacemit,k1-i2c.yaml | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
diff --git a/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
new file mode 100644
index 000000000000..c1460ec2b323
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/spacemit,k1-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controller embedded in SpacemiT's K1 SoC
+
+maintainers:
+ - Troy Mitchell <troymitchell988@gmail.com>
+
+properties:
+ compatible:
+ const: spacemit,k1-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency:
+ description:
+ Desired I2C bus clock frequency in Hz. As only fast and high-speed
+ modes are supported by hardware, possible values are 100000 and 400000.
+ enum: [100000, 400000]
+ default: 100000
+
+ fifo-disable:
+ type: boolean
+ description:
+ Whether to disable FIFO. If FIFO is turned on, it will be interrupted
+ only when the FIFO depth is reached, which can reduce the frequency
+ of interruption.
+ default: false
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+examples:
+ - |
+ i2c0: i2c@d4010800 {
+ compatible = "spacemit,k1-i2c";
+ reg = <0x0 0xd4010800 0x0 0x38>;
+ interrupt-parent = <&plic>;
+ interrupts = <36>;
+ clocks = <&ccu 90>;
+ clock-frequency = <100000>;
+ };
+
+...
--
2.34.1
next prev parent reply other threads:[~2024-10-15 7:51 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-15 7:51 [PATCH v1 0/2] riscv: spacemit: add i2c support to K1 SoC Troy Mitchell
2024-10-15 7:51 ` Troy Mitchell [this message]
2024-10-15 8:02 ` [PATCH v1 1/2] dt-bindings: i2c: spacemit: add support for " Krzysztof Kozlowski
2024-10-15 16:47 ` Conor Dooley
2024-10-16 2:45 ` Troy Mitchell
2024-10-16 7:44 ` Krzysztof Kozlowski
2024-10-15 9:22 ` Rob Herring (Arm)
2024-10-15 7:51 ` [PATCH v1 2/2] i2c: spacemit: add support for SpacemiT " Troy Mitchell
2024-10-15 8:08 ` Krzysztof Kozlowski
2024-10-15 9:21 ` Wolfram Sang
2024-10-18 5:17 ` Troy Mitchell
2024-10-18 6:05 ` Krzysztof Kozlowski
2024-10-18 8:33 ` Troy Mitchell
2024-10-18 8:39 ` Krzysztof Kozlowski
2024-10-15 9:17 ` Wolfram Sang
2024-10-16 2:26 ` Troy Mitchell
2024-10-16 7:06 ` Wolfram Sang
2024-10-16 9:39 ` Uwe Kleine-König
2024-10-21 7:22 ` Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241015075134.1449458-2-TroyMitchell988@gmail.com \
--to=troymitchell988@gmail.com \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).