Re: [PATCH v2 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control

[Rob Herring <robh@kernel.org>]

On Tue, Oct 15, 2024 at 08:58:31PM +0800, Wei Fang wrote:
> Add bindings for NXP NETC blocks control. Usually, NETC has 2 blocks of
> 64KB registers, integrated endpoint register block (IERB) and privileged
> register block (PRB). IERB is used for pre-boot initialization for all
> NETC devices, such as ENETC, Timer, EMIDO and so on. And PRB controls

EMIDO or EMDIO? 

> global reset and global error handling for NETC. Moreover, for the i.MX
> platform, there is also a NETCMIX block for link configuration, such as
> MII protocol, PCS protocol, etc.
> 
> Signed-off-by: Wei Fang <wei.fang@nxp.com>
> ---
> v2 changes:
> 1. Rephrase the commit message.
> 2. Change unevaluatedProperties to additionalProperties.
> 3. Remove the useless lables from examples.
> ---
>  .../bindings/net/nxp,netc-blk-ctrl.yaml       | 107 ++++++++++++++++++
>  1 file changed, 107 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
> new file mode 100644
> index 000000000000..18a6ccf6bc2e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
> @@ -0,0 +1,107 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/nxp,netc-blk-ctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NETC Blocks Control
> +
> +description:
> +  Usually, NETC has 2 blocks of 64KB registers, integrated endpoint register
> +  block (IERB) and privileged register block (PRB). IERB is used for pre-boot
> +  initialization for all NETC devices, such as ENETC, Timer, EMIDO and so on.
> +  And PRB controls global reset and global error handling for NETC. Moreover,
> +  for the i.MX platform, there is also a NETCMIX block for link configuration,
> +  such as MII protocol, PCS protocol, etc.
> +
> +maintainers:
> +  - Wei Fang <wei.fang@nxp.com>
> +  - Clark Wang <xiaoning.wang@nxp.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,imx95-netc-blk-ctrl
> +
> +  reg:
> +    minItems: 2
> +    maxItems: 3
> +
> +  reg-names:
> +    minItems: 2
> +    items:
> +      - const: ierb
> +      - const: prb
> +      - const: netcmix
> +
> +  "#address-cells":
> +    const: 2
> +
> +  "#size-cells":
> +    const: 2
> +
> +  ranges: true
> +
> +  clocks:
> +    items:
> +      - description: NETC system clock

Just 'maxItems: 1' is enough. The description doesn't add much.
> +
> +  clock-names:
> +    items:
> +      - const: ipg_clk

Just 'ipg'

> +
> +  power-domains:
> +    maxItems: 1
> +
> +patternProperties:
> +  "^pcie@[0-9a-f]+$":
> +    $ref: /schemas/pci/host-generic-pci.yaml#
> +
> +required:
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +  - reg
> +  - reg-names
> +  - ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    bus {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        netc-blk-ctrl@4cde0000 {
> +            compatible = "nxp,imx95-netc-blk-ctrl";
> +            reg = <0x0 0x4cde0000 0x0 0x10000>,
> +                  <0x0 0x4cdf0000 0x0 0x10000>,
> +                  <0x0 0x4c81000c 0x0 0x18>;
> +            reg-names = "ierb", "prb", "netcmix";
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +            ranges;
> +            clocks = <&scmi_clk 98>;
> +            clock-names = "ipg_clk";
> +            power-domains = <&scmi_devpd 18>;
> +
> +            pcie@4cb00000 {
> +                compatible = "pci-host-ecam-generic";
> +                reg = <0x0 0x4cb00000 0x0 0x100000>;
> +                #address-cells = <3>;
> +                #size-cells = <2>;
> +                device_type = "pci";
> +                bus-range = <0x1 0x1>;
> +                ranges = <0x82000000 0x0 0x4cce0000  0x0 0x4cce0000  0x0 0x20000
> +                          0xc2000000 0x0 0x4cd10000  0x0 0x4cd10000  0x0 0x10000>;
> +
> +                mdio@0,0 {
> +                    compatible = "pci1131,ee00";
> +                    reg = <0x010000 0 0 0 0>;
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.34.1
>