From: Mahadevan <quic_mahap@quicinc.com>
To: Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Sean Paul <sean@poorly.run>,
Marijn Suijten <marijn.suijten@somainline.org>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Mahadevan <quic_mahap@quicinc.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Bjorn Andersson <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>
Cc: <linux-arm-msm@vger.kernel.org>,
<dri-devel@lists.freedesktop.org>,
<freedreno@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Kalyan Thota <quic_kalyant@quicinc.com>,
Jayaprakash Madisetty <quic_jmadiset@quicinc.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v4 1/5] dt-bindings: display/msm: Document MDSS on SA8775P
Date: Sat, 19 Oct 2024 20:46:35 +0530 [thread overview]
Message-ID: <20241019-patchv3_1-v4-1-a95d8f0eae37@quicinc.com> (raw)
In-Reply-To: <20241019-patchv3_1-v4-0-a95d8f0eae37@quicinc.com>
Document the MDSS hardware found on the Qualcomm SA8775P platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
---
.../bindings/display/msm/qcom,sa8775p-mdss.yaml | 241 +++++++++++++++++++++
1 file changed, 241 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..58f8a01f29c7aaa9dc943c232363075686c06a7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sa8775p-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SA87755P Display MDSS
+
+maintainers:
+ - Mahadevan <quic_mahap@quicinc.com>
+
+description:
+ SA8775P MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DP interfaces and EDP etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sa8775p-mdss
+
+ clocks:
+ items:
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 3
+
+ interconnect-names:
+ maxItems: 3
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sa8775p-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sa8775p-dp
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+ #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sa8775p-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+ <&mmss_noc MASTER_MDP1 &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+ interconnect-names = "mdp0-mem",
+ "mdp1-mem",
+ "cpu-cfg";
+
+
+ resets = <&dispcc_core_bcr>;
+ power-domains = <&dispcc_gdsc>;
+
+ clocks = <&dispcc_ahb_clk>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc_mdp_clk>;
+
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x1000 0x402>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sa8775p-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc_ahb_clk>,
+ <&dispcc_mdp_lut_clk>,
+ <&dispcc_mdp_clk>,
+ <&dispcc_mdp_vsync_clk>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc_mdp_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdss0_mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss0_dp0_in>;
+ };
+ };
+ };
+
+ mdss0_mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-575000000 {
+ opp-hz = /bits/ 64 <575000000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+
+ opp-650000000 {
+ opp-hz = /bits/ 64 <650000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
+ displayport-controller@af54000 {
+ compatible = "qcom,sa8775p-dp";
+
+ pinctrl-0 = <&dp_hot_plug_det>;
+ pinctrl-names = "default";
+
+ reg = <0xaf54000 0x104>,
+ <0xaf54200 0x0c0>,
+ <0xaf55000 0x770>,
+ <0xaf56000 0x09c>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <12>;
+
+ clocks = <&dispcc_mdss_ahb_clk>,
+ <&dispcc_dptx0_aux_clk>,
+ <&dispcc_dptx0_link_clk>,
+ <&dispcc_dptx0_link_intf_clk>,
+ <&dispcc_dptx0_pixel0_clk>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+ <&dispcc_mdss_dptx0_pixel0_clk_src>;
+ assigned-clock-parents = <&mdss0_edp_phy 0>, <&mdss0_edp_phy 1>;
+
+ phys = <&mdss0_edp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss0_dp0_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss0_dp_out: endpoint { };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+...
--
2.34.1
next prev parent reply other threads:[~2024-10-19 15:38 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-19 15:16 [PATCH v4 0/5] Display enablement changes for Qualcomm SA8775P platform Mahadevan
2024-10-19 15:16 ` Mahadevan [this message]
2024-10-19 15:16 ` [PATCH v4 2/5] dt-bindings: display/msm: Document the DPU for SA8775P Mahadevan
2024-10-19 15:16 ` [PATCH v4 3/5] drm/msm: mdss: Add SA8775P support Mahadevan
2024-10-19 15:16 ` [PATCH v4 4/5] drm/msm/dpu: " Mahadevan
2024-10-19 15:16 ` [PATCH v4 5/5] arm64: dts: qcom: sa8775p: add display dt nodes for MDSS0 and DPU Mahadevan
2024-10-19 15:43 ` [PATCH v4 0/5] Display enablement changes for Qualcomm SA8775P platform Mahadevan P
2024-10-19 16:13 ` Dmitry Baryshkov
-- strict thread matches above, loose matches on Subject: below --
2024-10-09 14:32 Mahadevan
2024-10-09 14:32 ` [PATCH v4 1/5] dt-bindings: display/msm: Document MDSS on SA8775P Mahadevan
2024-10-18 10:59 ` Dmitry Baryshkov
2024-11-11 17:06 ` Rob Herring
2024-11-11 17:17 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241019-patchv3_1-v4-1-a95d8f0eae37@quicinc.com \
--to=quic_mahap@quicinc.com \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=marijn.suijten@somainline.org \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_jmadiset@quicinc.com \
--cc=quic_kalyant@quicinc.com \
--cc=robdclark@gmail.com \
--cc=robh@kernel.org \
--cc=sean@poorly.run \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).