[PATCH v7 0/3] Add support for AD777x family

[PATCH v7 0/3] Add support for AD777x family

[Ramona Alexandra Nechita]

v6:
  * https://lore.kernel.org/all/20240926135418.8342-1-ramona.nechita@analog.com/
v6:
  * Patch3:
    - miscellanous changes regarding coding style
    - switched timestamp type to aligned_s64
    - removed length variable from spi_write/read
    - modified the cast from reg_access
    - used mult_frac from math.h in the calculation of the frequency function
    - declared struct device in probe funcrion and reduced the number of lines
    - removed shadowed error codes
    - renamed spi_transfer structures to 't'
    - added comments to all the fsleep function calls

Ramona Alexandra Nechita (3):
  dt-bindings: iio: adc: add a7779 doc
  Documentation: ABI: added filter mode doc in sysfs-bus-iio
  drivers: iio: adc: add support for ad777x family

 Documentation/ABI/testing/sysfs-bus-iio       |  22 +
 .../ABI/testing/sysfs-bus-iio-adc-ad4130      |  46 -
 .../bindings/iio/adc/adi,ad7779.yaml          | 110 +++
 MAINTAINERS                                   |   1 -
 drivers/iio/adc/Kconfig                       |  11 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/ad7779.c                      | 909 ++++++++++++++++++
 7 files changed, 1053 insertions(+), 47 deletions(-)
 delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
 create mode 100644 drivers/iio/adc/ad7779.c

-- 
2.43.0

[PATCH v7 1/3] dt-bindings: iio: adc: add a7779 doc

[Ramona Alexandra Nechita]

Add dt bindings for AD7779 8-channel, simultaneous sampling ADC
family with eight full Σ-Δ ADCs on chip and ultra-low input
current to allow direct sensor connection.

Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
---
 .../bindings/iio/adc/adi,ad7779.yaml          | 110 ++++++++++++++++++
 1 file changed, 110 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
new file mode 100644
index 000000000000..044f92f39cfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7779.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD777X family 8-Channel, 24-Bit, Simultaneous Sampling ADCs
+
+maintainers:
+  - Ramona Nechita <ramona.nechita@analog.com>
+
+description: |
+  The AD777X family consist of 8-channel, simultaneous sampling analog-to-
+  digital converter (ADC). Eight full Σ-Δ ADCs are on-chip. The
+  AD7771 provides an ultralow input current to allow direct sensor
+  connection. Each input channel has a programmable gain stage
+  allowing gains of 1, 2, 4, and 8 to map lower amplitude sensor
+  outputs into the full-scale ADC input range, maximizing the
+  dynamic range of the signal chain.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7770.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7771.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7779.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7770
+      - adi,ad7771
+      - adi,ad7779
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  avdd1-supply:
+    description: Front-End analog supply AVDD1. Can be used as conversion ref.
+
+  avdd2-supply:
+    description: AVDD2 Analog Supply from 2.2 V to 3.6 V.
+
+  avdd4-supply:
+    description: AVDD4 SAR Analog Supply and Reference Source.
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: |
+          adc_rdy: Interrupt line for DRDY signal which indicates the end of
+          conversion independently of the interface selected to read back the
+          Σ-∆ conversion.
+      - description: |
+          Alert: The chip includes self diagnostic features to guarantee the
+          correct operation. If an error is detected, the ALERT pin is pulled
+          high to generate an external interruption to the controller.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - adc_rdy
+        - alert
+
+  start-gpios:
+    description:
+      Pin that controls start synchronization pulse.
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad7779";
+          reg = <0>;
+          start-gpios = <&gpio0 87 GPIO_ACTIVE_LOW>;
+          reset-gpios = <&gpio0 93 GPIO_ACTIVE_LOW>;
+          interrupt-parent = <&intc>;
+          interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "adc_rdy";
+          clocks = <&adc_clk>;
+        };
+    };
+...
-- 
2.43.0

Re: [PATCH v7 1/3] dt-bindings: iio: adc: add a7779 doc

[Krzysztof Kozlowski]

On 14/10/2024 16:31, Ramona Alexandra Nechita wrote:
> Add dt bindings for AD7779 8-channel, simultaneous sampling ADC
> family with eight full Σ-Δ ADCs on chip and ultra-low input
> current to allow direct sensor connection.
> 
> Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>

<form letter>
This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.

https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577

If a tag was not added on purpose, please state why and what changed.
</form letter>

Best regards,
Krzysztof

Re: [PATCH v7 1/3] dt-bindings: iio: adc: add a7779 doc

[Jonathan Cameron]

On Mon, 14 Oct 2024 19:59:47 +0200
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

> On 14/10/2024 16:31, Ramona Alexandra Nechita wrote:
> > Add dt bindings for AD7779 8-channel, simultaneous sampling ADC
> > family with eight full Σ-Δ ADCs on chip and ultra-low input
> > current to allow direct sensor connection.
> > 
> > Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>  
> 
> <form letter>
> This is a friendly reminder during the review process.
> 
> It looks like you received a tag and forgot to add it.
> 
> If you do not know the process, here is a short explanation:
> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
> versions, under or above your Signed-off-by tag. Tag is "received", when
> provided in a message replied to you on the mailing list. Tools like b4
> can help here. However, there's no need to repost patches *only* to add
> the tags. The upstream maintainer will do that for tags received on the
> version they apply.
> 
> https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
> 
> If a tag was not added on purpose, please state why and what changed.
> </form letter>
> 
> Best regards,
> Krzysztof
> 
If we go around again, please also fix the part number in the patch title.

Jonathan

[PATCH v7 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio

[Ramona Alexandra Nechita]

The filter mode / filter type property is used for ad4130
and ad7779 drivers, therefore the ABI doc file for ad4130
was removed, merging both of them in the sysfs-bus-iio.
Since one of the drivers is available from 6.1, the version
has been set to 6.1 for these attributes.

Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
---
 Documentation/ABI/testing/sysfs-bus-iio       | 22 +++++++++
 .../ABI/testing/sysfs-bus-iio-adc-ad4130      | 46 -------------------
 MAINTAINERS                                   |  1 -
 3 files changed, 22 insertions(+), 47 deletions(-)
 delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 89943c2d54e8..541b3a28c1fd 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -2268,6 +2268,28 @@ Description:
 		An example format is 16-bytes, 2-digits-per-byte, HEX-string
 		representing the sensor unique ID number.
 
+What:		/sys/bus/iio/devices/iio:deviceX/filter_type_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns a list with the possible filter modes. Options
+		for the attribute:
+			* "sinc3"	- The digital sinc3 filter. Moderate 1st conversion time.
+		    Good noise performance.
+			* "sinc4"       - Sinc 4. Excellent noise performance. Long
+			1st conversion time.
+			* "sinc5"	- The digital sinc5 filter. Excellent noise performance
+			* "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion
+		    time.
+			* "sinc3+rej60" - Sinc3 + 60Hz rejection.
+			* "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion
+		    time.
+			* "sinc3+pf1"   - Sinc3 + device specific Post Filter 1.
+			* "sinc3+pf2"   - Sinc3 + device specific Post Filter 2.
+			* "sinc3+pf3"   - Sinc3 + device specific Post Filter 3.
+			* "sinc3+pf4"   - Sinc3 + device specific Post Filter 4.
+
 What:		/sys/.../events/in_proximity_thresh_either_runningperiod
 KernelVersion:	6.6
 Contact:	linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
deleted file mode 100644
index f24ed6687e90..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
+++ /dev/null
@@ -1,46 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available
-KernelVersion:  6.2
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reading returns a list with the possible filter modes.
-
-		  * "sinc4"       - Sinc 4. Excellent noise performance. Long
-                    1st conversion time. No natural 50/60Hz rejection.
-
-		  * "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion
-		    time.
-
-		  * "sinc3"	      - Sinc3. Moderate 1st conversion time.
-		    Good noise performance.
-
-		  * "sinc3+rej60" - Sinc3 + 60Hz rejection. At a sampling
-		    frequency of 50Hz, achieves simultaneous 50Hz and 60Hz
-		    rejection.
-
-		  * "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion
-		    time. Best used with a sampling frequency of at least
-		    216.19Hz.
-
-		  * "sinc3+pf1"   - Sinc3 + Post Filter 1. 53dB rejection @
-		    50Hz, 58dB rejection @ 60Hz.
-
-		  * "sinc3+pf2"   - Sinc3 + Post Filter 2. 70dB rejection @
-		    50Hz, 70dB rejection @ 60Hz.
-
-		  * "sinc3+pf3"   - Sinc3 + Post Filter 3. 99dB rejection @
-		    50Hz, 103dB rejection @ 60Hz.
-
-		  * "sinc3+pf4"   - Sinc3 + Post Filter 4. 103dB rejection @
-		    50Hz, 109dB rejection @ 60Hz.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_filter_mode
-KernelVersion:  6.2
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Set the filter mode of the differential channel. When the filter
-		mode changes, the in_voltageY-voltageZ_sampling_frequency and
-		in_voltageY-voltageZ_sampling_frequency_available attributes
-		might also change to accommodate the new filter mode.
-		If the current sampling frequency is out of range for the new
-		filter mode, the sampling frequency will be changed to the
-		closest valid one.
diff --git a/MAINTAINERS b/MAINTAINERS
index 6011af70c12e..2de269df7d3a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1262,7 +1262,6 @@ M:	Cosmin Tanislav <cosmin.tanislav@analog.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
-F:	Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
 F:	drivers/iio/adc/ad4130.c
 
-- 
2.43.0

Re: [PATCH v7 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio

[Jonathan Cameron]

On Mon, 14 Oct 2024 17:31:59 +0300
Ramona Alexandra Nechita <ramona.nechita@analog.com> wrote:

> The filter mode / filter type property is used for ad4130
> and ad7779 drivers, therefore the ABI doc file for ad4130
> was removed, merging both of them in the sysfs-bus-iio.
> Since one of the drivers is available from 6.1, the version
> has been set to 6.1 for these attributes.
> 
> Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
> ---

> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6011af70c12e..2de269df7d3a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1262,7 +1262,6 @@ M:	Cosmin Tanislav <cosmin.tanislav@analog.com>
>  L:	linux-iio@vger.kernel.org
>  S:	Supported
>  W:	https://ez.analog.com/linux-software-drivers
> -F:	Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
?  Spurious change.

>  F:	Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
>  F:	drivers/iio/adc/ad4130.c
>  

Re: [PATCH v7 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio

[Jonathan Cameron]

On Sun, 20 Oct 2024 12:06:24 +0100
Jonathan Cameron <jic23@kernel.org> wrote:

> On Mon, 14 Oct 2024 17:31:59 +0300
> Ramona Alexandra Nechita <ramona.nechita@analog.com> wrote:
> 
> > The filter mode / filter type property is used for ad4130
> > and ad7779 drivers, therefore the ABI doc file for ad4130
> > was removed, merging both of them in the sysfs-bus-iio.
> > Since one of the drivers is available from 6.1, the version
> > has been set to 6.1 for these attributes.
> > 
> > Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
> > ---  
> 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 6011af70c12e..2de269df7d3a 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1262,7 +1262,6 @@ M:	Cosmin Tanislav <cosmin.tanislav@analog.com>
> >  L:	linux-iio@vger.kernel.org
> >  S:	Supported
> >  W:	https://ez.analog.com/linux-software-drivers
> > -F:	Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130  
> ?  Spurious change.
Ignore that.  Change is correct I'm just being slow this morning!

Jonathan

> 
> >  F:	Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
> >  F:	drivers/iio/adc/ad4130.c
> >    
> 
> 

Re: [PATCH v7 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio

[Jonathan Cameron]

On Mon, 14 Oct 2024 17:31:59 +0300
Ramona Alexandra Nechita <ramona.nechita@analog.com> wrote:

> The filter mode / filter type property is used for ad4130
> and ad7779 drivers, therefore the ABI doc file for ad4130
> was removed, merging both of them in the sysfs-bus-iio.
> Since one of the drivers is available from 6.1, the version
> has been set to 6.1 for these attributes.
> 
> Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
You didn't pick up Andy's Reviewed-by on an earlier version.

Please be more careful with those in future!

[PATCH v7 3/3] drivers: iio: adc: add support for ad777x family

[Ramona Alexandra Nechita]

Add support for AD7770, AD7771, AD7779 ADCs. The device is capable of
sending out data both on DOUT lines interface,as on the SDO line.
The driver currently implements only the SDO data streaming mode. SPI
communication is used alternatively for accessing registers and streaming
data. Register accesses are protected by crc8.

Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
---
 drivers/iio/adc/Kconfig  |  11 +
 drivers/iio/adc/Makefile |   1 +
 drivers/iio/adc/ad7779.c | 909 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 921 insertions(+)
 create mode 100644 drivers/iio/adc/ad7779.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 85b82a708c36..9802cb87075a 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -267,6 +267,17 @@ config AD7768_1
 	  To compile this driver as a module, choose M here: the module will be
 	  called ad7768-1.
 
+config AD7779
+	tristate "Analog Devices AD7779 ADC driver"
+	depends on SPI
+	select IIO_BUFFER
+	help
+	  Say yes here to build support for Analog Devices AD777X family
+	  (AD7770, AD7771, AD7779) analog to digital converter (ADC).
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ad7779.
+
 config AD7780
 	tristate "Analog Devices AD7780 and similar ADCs driver"
 	depends on SPI
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 66b36dfe9a28..fa579f4d37fd 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o
 obj-$(CONFIG_AD7606) += ad7606.o
 obj-$(CONFIG_AD7766) += ad7766.o
 obj-$(CONFIG_AD7768_1) += ad7768-1.o
+obj-$(CONFIG_AD7779) += ad7779.o
 obj-$(CONFIG_AD7780) += ad7780.o
 obj-$(CONFIG_AD7791) += ad7791.o
 obj-$(CONFIG_AD7793) += ad7793.o
diff --git a/drivers/iio/adc/ad7779.c b/drivers/iio/adc/ad7779.c
new file mode 100644
index 000000000000..5904cc669f3a
--- /dev/null
+++ b/drivers/iio/adc/ad7779.c
@@ -0,0 +1,909 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AD7770, AD7771, AD7779 ADC
+ *
+ * Copyright 2023-2024 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitmap.h>
+#include <linux/clk.h>
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+#include <asm/unaligned.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define AD7779_SPI_READ_CMD			BIT(7)
+
+#define AD7779_DISABLE_SD			BIT(7)
+
+#define AD7779_REG_CH_DISABLE			0x08
+#define AD7779_REG_CH_SYNC_OFFSET(ch)		(0x09 + (ch))
+#define AD7779_REG_CH_CONFIG(ch)		(0x00 + (ch))
+#define AD7779_REG_GENERAL_USER_CONFIG_1	0x11
+#define AD7779_REG_GENERAL_USER_CONFIG_2	0x12
+#define AD7779_REG_GENERAL_USER_CONFIG_3	0x13
+#define AD7779_REG_DOUT_FORMAT			0x14
+#define AD7779_REG_ADC_MUX_CONFIG		0x15
+#define AD7779_REG_GPIO_CONFIG			0x17
+#define AD7779_REG_BUFFER_CONFIG_1		0x19
+#define AD7779_REG_GLOBAL_MUX_CONFIG		0x16
+#define AD7779_REG_BUFFER_CONFIG_2		0x1A
+#define AD7779_REG_GPIO_DATA			0x18
+#define AD7779_REG_CH_OFFSET_UPPER_BYTE(ch)	(0x1C + (ch) * 6)
+#define AD7779_REG_CH_OFFSET_LOWER_BYTE(ch)	(0x1E + (ch) * 6)
+#define AD7779_REG_CH_GAIN_UPPER_BYTE(ch)	(0x1F + (ch) * 6)
+#define AD7779_REG_CH_OFFSET_MID_BYTE(ch)	(0x1D + (ch) * 6)
+#define AD7779_REG_CH_GAIN_MID_BYTE(ch)		(0x20 + (ch) * 6)
+#define AD7779_REG_CH_ERR_REG(ch)		(0x4C + (ch))
+#define AD7779_REG_CH0_1_SAT_ERR		0x54
+#define AD7779_REG_CH_GAIN_LOWER_BYTE(ch)	(0x21 + (ch) * 6)
+#define AD7779_REG_CH2_3_SAT_ERR		0x55
+#define AD7779_REG_CH4_5_SAT_ERR		0x56
+#define AD7779_REG_CH6_7_SAT_ERR		0x57
+#define AD7779_REG_CHX_ERR_REG_EN		0x58
+#define AD7779_REG_GEN_ERR_REG_1		0x59
+#define AD7779_REG_GEN_ERR_REG_1_EN		0x5A
+#define AD7779_REG_GEN_ERR_REG_2		0x5B
+#define AD7779_REG_GEN_ERR_REG_2_EN		0x5C
+#define AD7779_REG_STATUS_REG_1			0x5D
+#define AD7779_REG_STATUS_REG_2			0x5E
+#define AD7779_REG_STATUS_REG_3			0x5F
+#define AD7779_REG_SRC_N_MSB			0x60
+#define AD7779_REG_SRC_N_LSB			0x61
+#define AD7779_REG_SRC_IF_MSB			0x62
+#define AD7779_REG_SRC_IF_LSB			0x63
+#define AD7779_REG_SRC_UPDATE			0x64
+
+#define AD7779_FILTER_MSK			BIT(6)
+#define AD7779_MOD_POWERMODE_MSK		BIT(6)
+#define AD7779_MOD_PDB_REFOUT_MSK		BIT(4)
+#define AD7779_MOD_SPI_EN_MSK			BIT(4)
+#define AD7779_USRMOD_INIT_MSK			GENMASK(6, 4)
+
+/* AD7779_REG_DOUT_FORMAT */
+#define AD7779_DOUT_FORMAT_MSK			GENMASK(7, 6)
+#define AD7779_DOUT_HEADER_FORMAT		BIT(5)
+#define AD7779_DCLK_CLK_DIV_MSK			GENMASK(3, 1)
+
+#define AD7779_REFMUX_CTRL_MSK			GENMASK(7, 6)
+#define AD7779_SPI_CRC_EN_MSK			BIT(0)
+
+#define AD7779_MAXCLK_LOWPOWER			(4096 * HZ_PER_KHZ)
+#define AD7779_NUM_CHANNELS			8
+#define AD7779_RESET_BUF_SIZE			8
+#define AD7779_CHAN_DATA_SIZE			4
+
+#define AD7779_LOWPOWER_DIV			512
+#define AD7779_HIGHPOWER_DIV			2048
+
+#define AD7779_SINC3_MAXFREQ			(16 * HZ_PER_KHZ)
+#define AD7779_SINC5_MAXFREQ			(128 * HZ_PER_KHZ)
+
+#define AD7779_DEFAULT_SAMPLING_FREQ		(8 * HZ_PER_KHZ)
+#define AD7779_DEFAULT_SAMPLING_2LINE		(4 * HZ_PER_KHZ)
+#define AD7779_DEFAULT_SAMPLING_1LINE		(2 * HZ_PER_KHZ)
+
+#define AD7779_SPIMODE_MAX_SAMP_FREQ		(16 * HZ_PER_KHZ)
+
+#define GAIN_REL				0x555555
+#define AD7779_FREQ_MSB_MSK			GENMASK(15, 8)
+#define AD7779_FREQ_LSB_MSK			GENMASK(7, 0)
+#define AD7779_UPPER				GENMASK(23, 16)
+#define AD7779_MID				GENMASK(15, 8)
+#define AD7779_LOWER				GENMASK(7, 0)
+
+#define AD7779_REG_MSK		GENMASK(6, 0)
+
+#define AD7779_CRC8_POLY			0x07
+DECLARE_CRC8_TABLE(ad7779_crc8_table);
+
+enum ad7779_filter {
+	AD7779_SINC3,
+	AD7779_SINC5,
+};
+
+enum ad7779_variant {
+	ad7770,
+	ad7771,
+	ad7779,
+};
+
+enum ad7779_power_mode {
+	AD7779_LOW_POWER,
+	AD7779_HIGH_POWER,
+};
+
+struct ad7779_chip_info {
+	const char *name;
+	struct iio_chan_spec const *channels;
+};
+
+struct ad7779_state {
+	struct spi_device *spi;
+	const struct ad7779_chip_info *chip_info;
+	struct clk *mclk;
+	struct iio_trigger *trig;
+	struct completion completion;
+	unsigned int sampling_freq;
+	enum ad7779_filter filter_enabled;
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	struct {
+		u32 chans[8];
+		aligned_s64 timestamp;
+	} data __aligned(IIO_DMA_MINALIGN);
+	u32			spidata_tx[8];
+	u8			reg_rx_buf[3];
+	u8			reg_tx_buf[3];
+	u8			reset_buf[8];
+};
+
+static const char * const ad7779_filter_type[] = {
+	[AD7779_SINC3] = "sinc3",
+	[AD7779_SINC5] = "sinc5",
+};
+
+static const char * const ad7779_power_supplies[] = {
+	"avdd1", "avdd2", "avdd4",
+};
+
+static int ad7779_spi_read(struct ad7779_state *st, u8 reg, u8 *rbuf)
+{
+	int ret;
+	u8 crc_buf[2];
+	u8 exp_crc;
+	struct spi_transfer t = {
+		.tx_buf = st->reg_tx_buf,
+		.rx_buf = st->reg_rx_buf,
+	};
+
+	st->reg_tx_buf[0] = AD7779_SPI_READ_CMD | FIELD_GET(AD7779_REG_MSK, reg);
+	st->reg_tx_buf[1] = 0;
+
+	if (reg == AD7779_REG_GEN_ERR_REG_1_EN) {
+		t.len = 2;
+	} else {
+		t.len = 3;
+		st->reg_tx_buf[2] = crc8(ad7779_crc8_table, st->reg_tx_buf,
+					 t.len - 1, 0);
+	}
+
+	ret = spi_sync_transfer(st->spi, &t, 1);
+	if (ret)
+		return ret;
+
+	crc_buf[0] = AD7779_SPI_READ_CMD | FIELD_GET(AD7779_REG_MSK, reg);
+	crc_buf[1] = st->reg_rx_buf[1];
+	exp_crc = crc8(ad7779_crc8_table, crc_buf, ARRAY_SIZE(crc_buf), 0);
+	if (reg != AD7779_REG_GEN_ERR_REG_1_EN && exp_crc != st->reg_rx_buf[2]) {
+		dev_err(&st->spi->dev, "Bad CRC %x, expected %x",
+			st->reg_rx_buf[2], exp_crc);
+		return -EINVAL;
+	}
+	*rbuf = st->reg_rx_buf[1];
+
+	return 0;
+}
+
+static int ad7779_spi_write(struct ad7779_state *st, u8 reg, u8 val)
+{
+	u8 length = 3;
+
+	st->reg_tx_buf[0] = FIELD_GET(AD7779_REG_MSK, reg);
+	st->reg_tx_buf[1] = val;
+	if (reg == AD7779_REG_GEN_ERR_REG_1_EN)
+		length = 2;
+	else
+		st->reg_tx_buf[2] = crc8(ad7779_crc8_table, st->reg_tx_buf,
+					 length - 1, 0);
+
+	return spi_write(st->spi, st->reg_tx_buf, length);
+}
+
+static int ad7779_spi_write_mask(struct ad7779_state *st, u8 reg, u8 mask,
+				 u8 val)
+{
+	int ret;
+	u8 regval, data;
+
+	ret = ad7779_spi_read(st, reg, &data);
+	if (ret)
+		return ret;
+
+	regval = (data & ~mask) | (val & mask);
+
+	if (regval == data)
+		return 0;
+
+	return ad7779_spi_write(st, reg, regval);
+}
+
+static int ad7779_reg_access(struct iio_dev *indio_dev,
+			     unsigned int reg,
+			     unsigned int writeval,
+			     unsigned int *readval)
+{
+	struct ad7779_state *st = iio_priv(indio_dev);
+	u8 rval;
+	int ret;
+
+	if (readval) {
+		ret = ad7779_spi_read(st, reg, &rval);
+		*readval = rval;
+	}
+
+	return ad7779_spi_write(st, reg, writeval);
+}
+
+static int ad7779_set_sampling_frequency(struct ad7779_state *st,
+					 unsigned int sampling_freq)
+{
+	int ret;
+	unsigned int dec;
+	unsigned int frac;
+	unsigned int div;
+	unsigned int decimal;
+	unsigned int freq_khz;
+
+	if (st->filter_enabled == AD7779_SINC3 &&
+	    sampling_freq > AD7779_SINC3_MAXFREQ)
+		return -EINVAL;
+
+	if (st->filter_enabled == AD7779_SINC5 &&
+	    sampling_freq > AD7779_SINC5_MAXFREQ)
+		return -EINVAL;
+
+	if (sampling_freq > AD7779_SPIMODE_MAX_SAMP_FREQ)
+		return -EINVAL;
+
+	div = AD7779_HIGHPOWER_DIV;
+
+	freq_khz = sampling_freq / HZ_PER_KHZ;
+	dec = div / freq_khz;
+	frac = div % freq_khz;
+
+	ret = ad7779_spi_write(st, AD7779_REG_SRC_N_MSB,
+			       FIELD_GET(AD7779_FREQ_MSB_MSK, dec));
+	if (ret)
+		return ret;
+	ret = ad7779_spi_write(st, AD7779_REG_SRC_N_LSB,
+			       FIELD_GET(AD7779_FREQ_LSB_MSK, dec));
+	if (ret)
+		return ret;
+
+	if (frac) {
+		/*
+		 * In order to obtain the first three decimals of the decimation
+		 * the initial number is multiplied with 10^3 prior to the
+		 * division, then the original division result is subtracted and
+		 * the number is divided by 10^3.
+		 */
+		decimal = ((mult_frac(div, KILO, freq_khz) - dec * KILO) << 16)
+			  / KILO;
+		ret = ad7779_spi_write(st, AD7779_REG_SRC_N_MSB,
+				       FIELD_GET(AD7779_FREQ_MSB_MSK, decimal));
+		if (ret)
+			return ret;
+		ret = ad7779_spi_write(st, AD7779_REG_SRC_N_LSB,
+				       FIELD_GET(AD7779_FREQ_LSB_MSK, decimal));
+		if (ret)
+			return ret;
+	} else {
+		ret = ad7779_spi_write(st, AD7779_REG_SRC_N_MSB,
+				       FIELD_GET(AD7779_FREQ_MSB_MSK, 0x0));
+		if (ret)
+			return ret;
+		ret = ad7779_spi_write(st, AD7779_REG_SRC_N_LSB,
+				       FIELD_GET(AD7779_FREQ_LSB_MSK, 0x0));
+		if (ret)
+			return ret;
+	}
+	ret = ad7779_spi_write(st, AD7779_REG_SRC_UPDATE, BIT(0));
+	if (ret)
+		return ret;
+
+	/* SRC update settling time */
+	fsleep(15);
+
+	ret = ad7779_spi_write(st, AD7779_REG_SRC_UPDATE, 0x0);
+	if (ret)
+		return ret;
+
+	/* SRC update settling time */
+	fsleep(15);
+
+	st->sampling_freq = sampling_freq;
+
+	return 0;
+}
+
+static int ad7779_get_filter(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan)
+{
+	struct ad7779_state *st = iio_priv(indio_dev);
+	u8 temp;
+	int ret;
+
+	ret = ad7779_spi_read(st, AD7779_REG_GENERAL_USER_CONFIG_2, &temp);
+	if (ret)
+		return ret;
+
+	return FIELD_GET(AD7779_FILTER_MSK, temp);
+}
+
+static int ad7779_set_filter(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     unsigned int mode)
+{
+	struct ad7779_state *st = iio_priv(indio_dev);
+	int ret;
+
+	ret = ad7779_spi_write_mask(st,
+				    AD7779_REG_GENERAL_USER_CONFIG_2,
+				    AD7779_FILTER_MSK,
+				    FIELD_PREP(AD7779_FILTER_MSK, mode));
+	if (ret)
+		return ret;
+
+	ret = ad7779_set_sampling_frequency(st, st->sampling_freq);
+	if (ret)
+		return ret;
+
+	st->filter_enabled = mode;
+
+	return 0;
+}
+
+static int ad7779_get_calibscale(struct ad7779_state *st, int channel)
+{
+	int ret;
+	u8 calibscale[3];
+
+	ret = ad7779_spi_read(st, AD7779_REG_CH_GAIN_LOWER_BYTE(channel), &calibscale[0]);
+	if (ret)
+		return ret;
+
+	ret = ad7779_spi_read(st, AD7779_REG_CH_GAIN_MID_BYTE(channel), &calibscale[1]);
+	if (ret)
+		return ret;
+
+	ret = ad7779_spi_read(st, AD7779_REG_CH_GAIN_UPPER_BYTE(channel), &calibscale[2]);
+	if (ret)
+		return ret;
+
+	return get_unaligned_be24(calibscale);
+}
+
+static int ad7779_set_calibscale(struct ad7779_state *st, int channel, int val)
+{
+	int ret;
+	unsigned int gain;
+	u8 gain_bytes[3];
+
+	/*
+	 * The gain value is relative to 0x555555, which represents a gain of 1
+	 */
+	gain = DIV_ROUND_CLOSEST_ULL((u64)val * 5592405LL, MEGA);
+	put_unaligned_be24(gain, gain_bytes);
+	ret = ad7779_spi_write(st, AD7779_REG_CH_GAIN_UPPER_BYTE(channel),
+			       gain_bytes[0]);
+	if (ret)
+		return ret;
+
+	ret = ad7779_spi_write(st, AD7779_REG_CH_GAIN_MID_BYTE(channel),
+			       gain_bytes[1]);
+	if (ret)
+		return ret;
+
+	return ad7779_spi_write(st, AD7779_REG_CH_GAIN_LOWER_BYTE(channel),
+				gain_bytes[2]);
+}
+
+static int ad7779_get_calibbias(struct ad7779_state *st, int channel)
+{
+	int ret;
+	u8 calibbias[3];
+
+	ret = ad7779_spi_read(st, AD7779_REG_CH_OFFSET_LOWER_BYTE(channel),
+			      &calibbias[0]);
+	if (ret)
+		return ret;
+
+	ret = ad7779_spi_read(st, AD7779_REG_CH_OFFSET_MID_BYTE(channel),
+			      &calibbias[1]);
+	if (ret)
+		return ret;
+
+	ret = ad7779_spi_read(st, AD7779_REG_CH_OFFSET_UPPER_BYTE(channel),
+			      &calibbias[2]);
+	if (ret)
+		return ret;
+
+	return get_unaligned_be24(calibbias);
+}
+
+static int ad7779_set_calibbias(struct ad7779_state *st, int channel, int val)
+{
+	int ret;
+	u8 calibbias[3];
+
+	put_unaligned_be24(val, calibbias);
+	ret = ad7779_spi_write(st, AD7779_REG_CH_OFFSET_UPPER_BYTE(channel),
+			       calibbias[0]);
+	if (ret)
+		return ret;
+
+	ret = ad7779_spi_write(st, AD7779_REG_CH_OFFSET_MID_BYTE(channel),
+			       calibbias[1]);
+	if (ret)
+		return ret;
+
+	return ad7779_spi_write(st, AD7779_REG_CH_OFFSET_LOWER_BYTE(channel),
+				calibbias[2]);
+}
+
+static int ad7779_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan, int *val,
+			   int *val2, long mask)
+{
+	struct ad7779_state *st = iio_priv(indio_dev);
+	int ret;
+
+	iio_device_claim_direct_scoped(return -EBUSY, indio_dev) {
+		switch (mask) {
+		case IIO_CHAN_INFO_CALIBSCALE:
+			ret = ad7779_get_calibscale(st, chan->channel);
+			if (ret < 0)
+				return ret;
+			*val = ret;
+			*val2 = GAIN_REL;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_CHAN_INFO_CALIBBIAS:
+			ret = ad7779_get_calibbias(st, chan->channel);
+			if (ret < 0)
+				return ret;
+			*val = ret;
+			return IIO_VAL_INT;
+		case IIO_CHAN_INFO_SAMP_FREQ:
+			*val = st->sampling_freq;
+			if (*val < 0)
+				return -EINVAL;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	}
+	unreachable();
+}
+
+static int ad7779_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan, int val, int val2,
+			    long mask)
+{
+	struct ad7779_state *st = iio_priv(indio_dev);
+
+	iio_device_claim_direct_scoped(return -EBUSY, indio_dev) {
+		switch (mask) {
+		case IIO_CHAN_INFO_CALIBSCALE:
+			return ad7779_set_calibscale(st, chan->channel, val2);
+		case IIO_CHAN_INFO_CALIBBIAS:
+			return ad7779_set_calibbias(st, chan->channel, val);
+		case IIO_CHAN_INFO_SAMP_FREQ:
+			return ad7779_set_sampling_frequency(st, val);
+		default:
+			return -EINVAL;
+		}
+	}
+	unreachable();
+}
+
+static int ad7779_buffer_preenable(struct iio_dev *indio_dev)
+{
+	int ret;
+	struct ad7779_state *st = iio_priv(indio_dev);
+
+	ret = ad7779_spi_write_mask(st,
+				    AD7779_REG_GENERAL_USER_CONFIG_3,
+				    AD7779_MOD_SPI_EN_MSK,
+				    FIELD_PREP(AD7779_MOD_SPI_EN_MSK, 1));
+	if (ret)
+		return ret;
+
+	/*
+	 * DRDY output cannot be disabled at device level therefore we mask
+	 * the irq at host end.
+	 */
+	enable_irq(st->spi->irq);
+
+	return 0;
+}
+
+static int ad7779_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct ad7779_state *st = iio_priv(indio_dev);
+
+	disable_irq(st->spi->irq);
+
+	return ad7779_spi_write(st, AD7779_REG_GENERAL_USER_CONFIG_3,
+			       AD7779_DISABLE_SD);
+}
+
+static irqreturn_t ad7779_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ad7779_state *st = iio_priv(indio_dev);
+	int ret;
+	struct spi_transfer t = {
+		.rx_buf = st->data.chans,
+		.tx_buf = st->spidata_tx,
+		.len = AD7779_NUM_CHANNELS * AD7779_CHAN_DATA_SIZE,
+	};
+
+	st->spidata_tx[0] = AD7779_SPI_READ_CMD;
+	ret = spi_sync_transfer(st->spi, &t, 1);
+	if (ret) {
+		dev_err(&st->spi->dev, "SPI transfer error in IRQ handler");
+		goto exit_handler;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &st->data, pf->timestamp);
+
+exit_handler:
+	iio_trigger_notify_done(indio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+static int ad7779_reset(struct iio_dev *indio_dev, struct gpio_desc *reset_gpio)
+{
+	struct ad7779_state *st = iio_priv(indio_dev);
+	int ret;
+	struct spi_transfer t = {
+		.tx_buf = st->reset_buf,
+		.len = 8,
+	};
+
+	if (reset_gpio) {
+		gpiod_set_value(reset_gpio, 1);
+		/* Delay for reset to occur is 225 microseconds */
+		fsleep(230);
+		ret = 0;
+	} else {
+		memset(st->reset_buf, 0xff, sizeof(st->reset_buf));
+		ret = spi_sync_transfer(st->spi, &t, 1);
+		if (ret)
+			return ret;
+	}
+
+	/* Delay for reset to occur is 225 microseconds */
+	fsleep(230);
+
+	return ret;
+}
+
+static const struct iio_info ad7779_info = {
+	.read_raw = ad7779_read_raw,
+	.write_raw = ad7779_write_raw,
+	.debugfs_reg_access = &ad7779_reg_access,
+};
+
+static const struct iio_enum ad7779_filter_enum = {
+	.items = ad7779_filter_type,
+	.num_items = ARRAY_SIZE(ad7779_filter_type),
+	.get = ad7779_get_filter,
+	.set = ad7779_set_filter,
+};
+
+static const struct iio_chan_spec_ext_info ad7779_ext_filter[] = {
+	IIO_ENUM("filter_type", IIO_SHARED_BY_ALL, &ad7779_filter_enum),
+	IIO_ENUM_AVAILABLE("filter_type", IIO_SHARED_BY_ALL,
+				  &ad7779_filter_enum),
+	{ }
+};
+
+#define AD777x_CHAN_S(index, _ext_info)					       \
+	{								       \
+		.type = IIO_VOLTAGE,					       \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_CALIBSCALE)  |	       \
+				      BIT(IIO_CHAN_INFO_CALIBBIAS),	       \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),       \
+		.address = (index),					       \
+		.indexed = 1,						       \
+		.channel = (index),					       \
+		.scan_index = (index),					       \
+		.ext_info = (_ext_info),				       \
+		.scan_type = {						       \
+			.sign = 's',					       \
+			.realbits = 24,					       \
+			.storagebits = 32,				       \
+			.endianness = IIO_BE,				   \
+		},								\
+	}
+
+#define AD777x_CHAN_NO_FILTER_S(index)					       \
+	AD777x_CHAN_S(index, NULL)
+
+#define AD777x_CHAN_FILTER_S(index)					       \
+	AD777x_CHAN_S(index, ad7779_ext_filter)
+static const struct iio_chan_spec ad7779_channels[] = {
+	AD777x_CHAN_NO_FILTER_S(0),
+	AD777x_CHAN_NO_FILTER_S(1),
+	AD777x_CHAN_NO_FILTER_S(2),
+	AD777x_CHAN_NO_FILTER_S(3),
+	AD777x_CHAN_NO_FILTER_S(4),
+	AD777x_CHAN_NO_FILTER_S(5),
+	AD777x_CHAN_NO_FILTER_S(6),
+	AD777x_CHAN_NO_FILTER_S(7),
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+};
+
+static const struct iio_chan_spec ad7779_channels_filter[] = {
+	AD777x_CHAN_FILTER_S(0),
+	AD777x_CHAN_FILTER_S(1),
+	AD777x_CHAN_FILTER_S(2),
+	AD777x_CHAN_FILTER_S(3),
+	AD777x_CHAN_FILTER_S(4),
+	AD777x_CHAN_FILTER_S(5),
+	AD777x_CHAN_FILTER_S(6),
+	AD777x_CHAN_FILTER_S(7),
+	IIO_CHAN_SOFT_TIMESTAMP(8),
+};
+
+static const struct iio_buffer_setup_ops ad7779_buffer_setup_ops = {
+	.preenable = ad7779_buffer_preenable,
+	.postdisable = ad7779_buffer_postdisable,
+};
+
+static const struct iio_trigger_ops ad7779_trigger_ops = {
+	.validate_device = iio_trigger_validate_own_device,
+};
+
+static int ad7779_conf(struct ad7779_state *st, struct gpio_desc *start_gpio)
+{
+	int ret;
+
+	ret = ad7779_spi_write_mask(st, AD7779_REG_GEN_ERR_REG_1_EN,
+				    AD7779_SPI_CRC_EN_MSK,
+				    FIELD_PREP(AD7779_SPI_CRC_EN_MSK, 1));
+	if (ret)
+		return ret;
+
+	ret = ad7779_spi_write_mask(st, AD7779_REG_GENERAL_USER_CONFIG_1,
+				    AD7779_USRMOD_INIT_MSK,
+				    FIELD_PREP(AD7779_USRMOD_INIT_MSK, 5));
+	if (ret)
+		return ret;
+
+	ret = ad7779_spi_write_mask(st, AD7779_REG_DOUT_FORMAT,
+				    AD7779_DCLK_CLK_DIV_MSK,
+				    FIELD_PREP(AD7779_DCLK_CLK_DIV_MSK, 1));
+	if (ret)
+		return ret;
+
+	ret = ad7779_spi_write_mask(st, AD7779_REG_ADC_MUX_CONFIG,
+				    AD7779_REFMUX_CTRL_MSK,
+				    FIELD_PREP(AD7779_REFMUX_CTRL_MSK, 1));
+	if (ret)
+		return ret;
+
+	ret = ad7779_set_sampling_frequency(st, AD7779_DEFAULT_SAMPLING_FREQ);
+	if (ret)
+		return ret;
+
+	gpiod_set_value(start_gpio, 0);
+	/* Start setup time */
+	fsleep(15);
+	gpiod_set_value(start_gpio, 1);
+	/* Start setup time */
+	fsleep(15);
+	gpiod_set_value(start_gpio, 0);
+	/* Start setup time */
+	fsleep(15);
+
+	return 0;
+}
+
+static int ad7779_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ad7779_state *st;
+	struct gpio_desc *reset_gpio, *start_gpio;
+	struct device *dev = &spi->dev;
+	int ret = -EINVAL;
+
+	if (!spi->irq)
+		return dev_err_probe(dev, ret, "DRDY irq not present\n");
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	ret = devm_regulator_bulk_get_enable(dev,
+					     ARRAY_SIZE(ad7779_power_supplies),
+					     ad7779_power_supplies);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to get and enable supplies\n");
+
+	st->mclk = devm_clk_get_enabled(dev, "mclk");
+	if (IS_ERR(st->mclk))
+		return PTR_ERR(st->mclk);
+
+	reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(reset_gpio))
+		return PTR_ERR(reset_gpio);
+
+	start_gpio = devm_gpiod_get(dev, "start", GPIOD_OUT_HIGH);
+	if (IS_ERR(start_gpio))
+		return PTR_ERR(start_gpio);
+
+	crc8_populate_msb(ad7779_crc8_table, AD7779_CRC8_POLY);
+	st->spi = spi;
+
+	st->chip_info = spi_get_device_match_data(spi);
+	if (!st->chip_info)
+		return -ENODEV;
+
+	ret = ad7779_reset(indio_dev, reset_gpio);
+	if (ret)
+		return ret;
+
+	ret = ad7779_conf(st, start_gpio);
+	if (ret)
+		return ret;
+
+	indio_dev->name = st->chip_info->name;
+	indio_dev->info = &ad7779_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = st->chip_info->channels;
+	indio_dev->num_channels = ARRAY_SIZE(ad7779_channels);
+
+	st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name,
+					  iio_device_id(indio_dev));
+	if (!st->trig)
+		return -ENOMEM;
+
+	st->trig->ops = &ad7779_trigger_ops;
+
+	iio_trigger_set_drvdata(st->trig, st);
+
+	ret = devm_request_irq(dev, spi->irq, iio_trigger_generic_data_rdy_poll,
+			       IRQF_ONESHOT | IRQF_NO_AUTOEN, indio_dev->name,
+			       st->trig);
+	if (ret)
+		return dev_err_probe(dev, ret, "request IRQ %d failed\n",
+				     st->spi->irq);
+
+	ret = devm_iio_trigger_register(dev, st->trig);
+	if (ret)
+		return ret;
+
+	indio_dev->trig = iio_trigger_get(st->trig);
+
+	init_completion(&st->completion);
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, &iio_pollfunc_store_time,
+					      &ad7779_trigger_handler,
+					      &ad7779_buffer_setup_ops);
+	if (ret)
+		return ret;
+
+	ret = ad7779_spi_write_mask(st, AD7779_REG_DOUT_FORMAT,
+				    AD7779_DCLK_CLK_DIV_MSK,
+				    FIELD_PREP(AD7779_DCLK_CLK_DIV_MSK, 7));
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static int ad7779_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad7779_state *st = iio_priv(indio_dev);
+
+	return ad7779_spi_write_mask(st, AD7779_REG_GENERAL_USER_CONFIG_1,
+				     AD7779_MOD_POWERMODE_MSK,
+				     FIELD_PREP(AD7779_MOD_POWERMODE_MSK,
+					       AD7779_LOW_POWER));
+}
+
+static int ad7779_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct ad7779_state *st = iio_priv(indio_dev);
+
+	return ad7779_spi_write_mask(st, AD7779_REG_GENERAL_USER_CONFIG_1,
+				     AD7779_MOD_POWERMODE_MSK,
+				     FIELD_PREP(AD7779_MOD_POWERMODE_MSK,
+					       AD7779_HIGH_POWER));
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(ad7779_pm_ops, ad7779_suspend, ad7779_resume);
+
+static const struct ad7779_chip_info ad7770_chip_info = {
+	.name = "ad7770",
+	.channels = ad7779_channels,
+};
+
+static const struct ad7779_chip_info ad7771_chip_info = {
+	.name = "ad7771",
+	.channels = ad7779_channels_filter,
+};
+
+static const struct ad7779_chip_info ad7779_chip_info = {
+	.name = "ad7779",
+	.channels = ad7779_channels,
+};
+
+static const struct spi_device_id ad7779_id[] = {
+	{
+		.name = "ad7770",
+		.driver_data = (kernel_ulong_t)&ad7770_chip_info,
+	},
+	{
+		.name = "ad7771",
+		.driver_data = (kernel_ulong_t)&ad7771_chip_info,
+	},
+	{
+		.name = "ad7779",
+		.driver_data = (kernel_ulong_t)&ad7779_chip_info,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ad7779_id);
+
+static const struct of_device_id ad7779_of_table[] = {
+	{
+		.compatible = "adi,ad7770",
+		.data = &ad7770_chip_info,
+	},
+	{
+		.compatible = "adi,ad7771",
+		.data = &ad7771_chip_info,
+	},
+	{
+		.compatible = "adi,ad7779",
+		.data = &ad7779_chip_info,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad7779_of_table);
+
+static struct spi_driver ad7779_driver = {
+	.driver = {
+		.name = "ad7779",
+		.pm = pm_sleep_ptr(&ad7779_pm_ops),
+		.of_match_table = ad7779_of_table,
+	},
+	.probe = ad7779_probe,
+	.id_table = ad7779_id,
+};
+module_spi_driver(ad7779_driver);
+
+MODULE_AUTHOR("Ramona Alexandra Nechita <ramona.nechita@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7779 ADC");
+MODULE_LICENSE("GPL");
-- 
2.43.0

Re: [PATCH v7 3/3] drivers: iio: adc: add support for ad777x family

[Jonathan Cameron]

On Mon, 14 Oct 2024 17:32:00 +0300
Ramona Alexandra Nechita <ramona.nechita@analog.com> wrote:

> Add support for AD7770, AD7771, AD7779 ADCs. The device is capable of
> sending out data both on DOUT lines interface,as on the SDO line.
> The driver currently implements only the SDO data streaming mode. SPI
> communication is used alternatively for accessing registers and streaming
> data. Register accesses are protected by crc8.
> 
> Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>

A few comments inline.  I also tweaked white space in a few places
whilst applying.  Target in IIO is still sub 80 chars whenever it
doesn't hurt readability.

Also, you had unusual formatting for some of the macros. Avoid mixing
tabs then spaces for indentation of the \ 

series applied to the togreg branch of iio.git and initially pushed
out as testing so 0-day can take a look.

Thanks,

Jonathan

> diff --git a/drivers/iio/adc/ad7779.c b/drivers/iio/adc/ad7779.c
> new file mode 100644
> index 000000000000..5904cc669f3a
> --- /dev/null
> +++ b/drivers/iio/adc/ad7779.c
> @@ -0,0 +1,909 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * AD7770, AD7771, AD7779 ADC
> + *
> + * Copyright 2023-2024 Analog Devices Inc.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bitmap.h>
> +#include <linux/clk.h>
> +#include <linux/crc8.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/math.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +#include <linux/string.h>
> +#include <linux/types.h>
> +#include <linux/units.h>
> +
> +#include <asm/unaligned.h>

This moved, I'll fix up.

> +	{								       \
> +		.type = IIO_VOLTAGE,					       \
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_CALIBSCALE)  |	       \
> +				      BIT(IIO_CHAN_INFO_CALIBBIAS),	       \
> +		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),       \

It's not technically an ABI issue, but ususual to have an ADC driver that provides
no direct readings via sysfs and also provides no indication of channel scaling.

A quick glance at the datasheet suggests there is a PGA in the path, so perhaps
you plan to add scaling later.  Raw reads of single channels would I think
have to just select from the bulk channel read back so not that trivial to implement.
Maybe worth doing longer term though as that is a useful debug interface if nothing
else.

Anyhow, I'm fine with taking the driver with the current feature set
I was just a bit surprised at which features were implemented.

> +		.address = (index),					       \
> +		.indexed = 1,						       \
> +		.channel = (index),					       \
> +		.scan_index = (index),					       \
> +		.ext_info = (_ext_info),				       \
> +		.scan_type = {						       \
> +			.sign = 's',					       \
> +			.realbits = 24,					       \
> +			.storagebits = 32,				       \
> +			.endianness = IIO_BE,				   \
> +		},								\
> +	}
> +
> +#define AD777x_CHAN_NO_FILTER_S(index)					       \
> +	AD777x_CHAN_S(index, NULL)
> +
> +#define AD777x_CHAN_FILTER_S(index)					       \
> +	AD777x_CHAN_S(index, ad7779_ext_filter)
> +static const struct iio_chan_spec ad7779_channels[] = {
> +	AD777x_CHAN_NO_FILTER_S(0),
> +	AD777x_CHAN_NO_FILTER_S(1),
> +	AD777x_CHAN_NO_FILTER_S(2),
> +	AD777x_CHAN_NO_FILTER_S(3),
> +	AD777x_CHAN_NO_FILTER_S(4),
> +	AD777x_CHAN_NO_FILTER_S(5),
> +	AD777x_CHAN_NO_FILTER_S(6),
> +	AD777x_CHAN_NO_FILTER_S(7),
> +	IIO_CHAN_SOFT_TIMESTAMP(8),
> +};
> +
> +static const struct iio_chan_spec ad7779_channels_filter[] = {
> +	AD777x_CHAN_FILTER_S(0),
> +	AD777x_CHAN_FILTER_S(1),
> +	AD777x_CHAN_FILTER_S(2),
> +	AD777x_CHAN_FILTER_S(3),
> +	AD777x_CHAN_FILTER_S(4),
> +	AD777x_CHAN_FILTER_S(5),
> +	AD777x_CHAN_FILTER_S(6),
> +	AD777x_CHAN_FILTER_S(7),
> +	IIO_CHAN_SOFT_TIMESTAMP(8),
> +};

Re: [PATCH v7 3/3] drivers: iio: adc: add support for ad777x family

[Jonathan Cameron]

On Mon, 14 Oct 2024 17:32:00 +0300
Ramona Alexandra Nechita <ramona.nechita@analog.com> wrote:

> Add support for AD7770, AD7771, AD7779 ADCs. The device is capable of
> sending out data both on DOUT lines interface,as on the SDO line.
> The driver currently implements only the SDO data streaming mode. SPI
> communication is used alternatively for accessing registers and streaming
> data. Register accesses are protected by crc8.
> 
> Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>

A few comments inline.  I also tweaked white space in a few places
whilst applying.  Target in IIO is still sub 80 chars whenever it
doesn't hurt readability.

Also, you had unusual formatting for some of the macros. Avoid mixing
tabs then spaces for indentation of the \ 

series applied to the togreg branch of iio.git and initially pushed
out as testing so 0-day can take a look.

One missing return in the debugfs register access as well. Please
check I fixed that up correctly.

Thanks,

Jonathan

> diff --git a/drivers/iio/adc/ad7779.c b/drivers/iio/adc/ad7779.c
> new file mode 100644
> index 000000000000..5904cc669f3a
> --- /dev/null
> +++ b/drivers/iio/adc/ad7779.c
> @@ -0,0 +1,909 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * AD7770, AD7771, AD7779 ADC
> + *
> + * Copyright 2023-2024 Analog Devices Inc.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bitmap.h>
> +#include <linux/clk.h>
> +#include <linux/crc8.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/math.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +#include <linux/string.h>
> +#include <linux/types.h>
> +#include <linux/units.h>
> +
> +#include <asm/unaligned.h>

This moved, I'll fix up.

> +	{								       \
> +		.type = IIO_VOLTAGE,					       \
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_CALIBSCALE)  |	       \
> +				      BIT(IIO_CHAN_INFO_CALIBBIAS),	       \
> +		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),       \

It's not technically an ABI issue, but ususual to have an ADC driver that provides
no direct readings via sysfs and also provides no indication of channel scaling.

A quick glance at the datasheet suggests there is a PGA in the path, so perhaps
you plan to add scaling later.  Raw reads of single channels would I think
have to just select from the bulk channel read back so not that trivial to implement.
Maybe worth doing longer term though as that is a useful debug interface if nothing
else.

Anyhow, I'm fine with taking the driver with the current feature set
I was just a bit surprised at which features were implemented.

> +		.address = (index),					       \
> +		.indexed = 1,						       \
> +		.channel = (index),					       \
> +		.scan_index = (index),					       \
> +		.ext_info = (_ext_info),				       \
> +		.scan_type = {						       \
> +			.sign = 's',					       \
> +			.realbits = 24,					       \
> +			.storagebits = 32,				       \
> +			.endianness = IIO_BE,				   \
> +		},								\
> +	}
> +
> +#define AD777x_CHAN_NO_FILTER_S(index)					       \
> +	AD777x_CHAN_S(index, NULL)
> +
> +#define AD777x_CHAN_FILTER_S(index)					       \
> +	AD777x_CHAN_S(index, ad7779_ext_filter)
> +static const struct iio_chan_spec ad7779_channels[] = {
> +	AD777x_CHAN_NO_FILTER_S(0),
> +	AD777x_CHAN_NO_FILTER_S(1),
> +	AD777x_CHAN_NO_FILTER_S(2),
> +	AD777x_CHAN_NO_FILTER_S(3),
> +	AD777x_CHAN_NO_FILTER_S(4),
> +	AD777x_CHAN_NO_FILTER_S(5),
> +	AD777x_CHAN_NO_FILTER_S(6),
> +	AD777x_CHAN_NO_FILTER_S(7),
> +	IIO_CHAN_SOFT_TIMESTAMP(8),
> +};
> +
> +static const struct iio_chan_spec ad7779_channels_filter[] = {
> +	AD777x_CHAN_FILTER_S(0),
> +	AD777x_CHAN_FILTER_S(1),
> +	AD777x_CHAN_FILTER_S(2),
> +	AD777x_CHAN_FILTER_S(3),
> +	AD777x_CHAN_FILTER_S(4),
> +	AD777x_CHAN_FILTER_S(5),
> +	AD777x_CHAN_FILTER_S(6),
> +	AD777x_CHAN_FILTER_S(7),
> +	IIO_CHAN_SOFT_TIMESTAMP(8),
> +};

Re: [PATCH v7 3/3] drivers: iio: adc: add support for ad777x family

[Jonathan Cameron]

On Sun, 20 Oct 2024 12:56:12 +0100
Jonathan Cameron <jic23@kernel.org> wrote:

> On Mon, 14 Oct 2024 17:32:00 +0300
> Ramona Alexandra Nechita <ramona.nechita@analog.com> wrote:
> 
> > Add support for AD7770, AD7771, AD7779 ADCs. The device is capable of
> > sending out data both on DOUT lines interface,as on the SDO line.
> > The driver currently implements only the SDO data streaming mode. SPI
> > communication is used alternatively for accessing registers and streaming
> > data. Register accesses are protected by crc8.
> > 
> > Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>  
> 
> A few comments inline.  I also tweaked white space in a few places
> whilst applying.  Target in IIO is still sub 80 chars whenever it
> doesn't hurt readability.
> 
> Also, you had unusual formatting for some of the macros. Avoid mixing
> tabs then spaces for indentation of the \ 
> 
> series applied to the togreg branch of iio.git and initially pushed
> out as testing so 0-day can take a look.
> 
> One missing return in the debugfs register access as well. Please
> check I fixed that up correctly.
Seems I missed the cancel button when I noticed the build message
just as the other email went out.  Sorry for the noise!

> 
> Thanks,
> 
> Jonathan