* [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support
@ 2024-10-21 13:01 Christian Marangi
2024-10-21 13:01 ` [net-next RFC PATCH 1/4] net: mdio: implement mdio_mutex_nested guard() variant Christian Marangi
` (4 more replies)
0 siblings, 5 replies; 11+ messages in thread
From: Christian Marangi @ 2024-10-21 13:01 UTC (permalink / raw)
To: Christian Marangi, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Heiner Kallweit,
Russell King, Matthias Brugger, AngeloGioacchino Del Regno,
linux-arm-kernel, linux-mediatek, netdev, devicetree,
linux-kernel
This small series add the initial support for the Airoha AN8855 Switch.
It's a 5 port Gigabit Switch with SGMII/HSGMII upstream port.
This is starting to get in the wild and there are already some router
having this switch chip.
It's conceptually similar to mediatek switch but register and bits
are different. And there is that massive Hell that is the PCS
configuration.
Saddly for that part we have absolutely NO documentation currently.
There is this special thing where PHY needs to be calibrated with values
from the switch efuse. (the thing have a whole cpu timer and MCU)
Some cleanup API are used and one extra patch for mdio_mutex_nested is
introduced. As suggested some time ago, the use of such API is limited
to scoped variants and not the guard ones.
Posting as RFC as I expect in later version to add additional feature
but this is already working and upstream-ready. So this is really to
have a review of the very basic features and if I missed anything in
recent implementation of DSA.
Christian Marangi (4):
net: mdio: implement mdio_mutex_nested guard() variant
dt-bindings: net: dsa: Add Airoha AN8855 Gigabit Switch documentation
net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver
net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY
.../bindings/net/dsa/airoha,an8855.yaml | 146 ++
MAINTAINERS | 11 +
drivers/net/dsa/Kconfig | 9 +
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/an8855.c | 2008 +++++++++++++++++
drivers/net/dsa/an8855.h | 492 ++++
drivers/net/phy/Kconfig | 5 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/air_an8855.c | 187 ++
include/linux/mdio.h | 4 +
10 files changed, 2864 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/airoha,an8855.yaml
create mode 100644 drivers/net/dsa/an8855.c
create mode 100644 drivers/net/dsa/an8855.h
create mode 100644 drivers/net/phy/air_an8855.c
--
2.45.2
^ permalink raw reply [flat|nested] 11+ messages in thread
* [net-next RFC PATCH 1/4] net: mdio: implement mdio_mutex_nested guard() variant
2024-10-21 13:01 [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support Christian Marangi
@ 2024-10-21 13:01 ` Christian Marangi
2024-10-21 13:01 ` [net-next RFC PATCH 2/4] dt-bindings: net: dsa: Add Airoha AN8855 Gigabit Switch documentation Christian Marangi
` (3 subsequent siblings)
4 siblings, 0 replies; 11+ messages in thread
From: Christian Marangi @ 2024-10-21 13:01 UTC (permalink / raw)
To: Christian Marangi, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Heiner Kallweit,
Russell King, Matthias Brugger, AngeloGioacchino Del Regno,
linux-arm-kernel, linux-mediatek, netdev, devicetree,
linux-kernel
Implement mdio_mutex_nested guard() variant.
guard() comes from the cleanup.h API that defines handy class to
handle the lifecycle of a critical section.
Several drivers use of the mutex_lock_nested()/mutex_unlock() function
call pair hence it is sensible to provide a variant of the generic
guard(mutex), guard(mdio_mutex_nested) so that drivers can be better
supported with the call variant "mutex_lock_nested(..., MDIO_MUTEX_NESTED)"
Example usage:
guard(mutex_lock_nested)(&bus->mdio_lock)
scoped_guard(mutex_lock_nested, &bus->mdio_lock) { ... }
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
include/linux/mdio.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index efeca5bd7600..3f0691dee46a 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -8,6 +8,7 @@
#include <uapi/linux/mdio.h>
#include <linux/bitfield.h>
+#include <linux/mutex.h>
#include <linux/mod_devicetable.h>
struct gpio_desc;
@@ -25,6 +26,9 @@ enum mdio_mutex_lock_class {
MDIO_MUTEX_NESTED,
};
+DEFINE_GUARD(mdio_mutex_nested, struct mutex *,
+ mutex_lock_nested(_T, MDIO_MUTEX_NESTED), mutex_unlock(_T))
+
struct mdio_device {
struct device dev;
--
2.45.2
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [net-next RFC PATCH 2/4] dt-bindings: net: dsa: Add Airoha AN8855 Gigabit Switch documentation
2024-10-21 13:01 [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support Christian Marangi
2024-10-21 13:01 ` [net-next RFC PATCH 1/4] net: mdio: implement mdio_mutex_nested guard() variant Christian Marangi
@ 2024-10-21 13:01 ` Christian Marangi
2024-10-21 13:01 ` [net-next RFC PATCH 3/4] net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver Christian Marangi
` (2 subsequent siblings)
4 siblings, 0 replies; 11+ messages in thread
From: Christian Marangi @ 2024-10-21 13:01 UTC (permalink / raw)
To: Christian Marangi, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Heiner Kallweit,
Russell King, Matthias Brugger, AngeloGioacchino Del Regno,
linux-arm-kernel, linux-mediatek, netdev, devicetree,
linux-kernel
Add Airoha AN8855 5 port Gigabit Switch documentation.
The switch node requires an additional mdio node to describe each internal
PHY relative offset as the PHY address for the switch match the one for
the PHY ports. On top of internal PHY address, the switch base PHY address
is added.
Also the switch base PHY address can be configured and changed after the
first initialization. On reset, the switch PHY address is ALWAYS 1.
This can be configured with the use of "airoha,base_smi_address".
Calibration values might be stored in switch EFUSE and internal PHY
might need to be calibrated, in such case, airoha,ext_surge needs to be
enabled.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
.../bindings/net/dsa/airoha,an8855.yaml | 146 ++++++++++++++++++
1 file changed, 146 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/airoha,an8855.yaml
diff --git a/Documentation/devicetree/bindings/net/dsa/airoha,an8855.yaml b/Documentation/devicetree/bindings/net/dsa/airoha,an8855.yaml
new file mode 100644
index 000000000000..861c47df5bde
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/airoha,an8855.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/airoha,an8855.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha AN8855 Gigabit switch
+
+maintainers:
+ - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+ Airoha AN8855 is a 5-port Gigabit Switch.
+
+ The switch node requires an additional mdio node to describe each internal
+ PHY relative offset as the PHY address for the switch match the one for
+ the PHY ports. On top of internal PHY address, the switch base PHY address
+ is added.
+
+ Also the switch base PHY address can be configured and changed after the
+ first initialization. On reset, the switch PHY address is ALWAYS 1.
+
+properties:
+ compatible:
+ const: airoha,an8855
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ GPIO to be used to reset the whole device
+ maxItems: 1
+
+ airoha,base_smi_address:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Configure and change the base switch PHY address to a new address on
+ the bus.
+ On reset, the switch PHY address is ALWAYS 1.
+ default: 1
+ maximum: 31
+
+ airoha,ext_surge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Calibrate the internal PHY with the calibration values stored in EFUSE
+ for the r50Ohm values.
+
+ mdio:
+ $ref: /schemas/net/mdio.yaml#
+ unevaluatedProperties: false
+ description: Define the relative address of the internal PHY for each port.
+ Each reg for the PHY is relative to the switch base PHY address.
+
+$ref: dsa.yaml#
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@1 {
+ compatible = "airoha,an8855";
+ reg = <1>;
+ reset-gpios = <&pio 39 0>;
+
+ airoha,ext_surge;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ phy-mode = "internal";
+ phy-handle = <&internal_phy3>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ internal_phy0: phy@0 {
+ reg = <0>;
+ };
+
+ internal_phy1: phy@1 {
+ reg = <1>;
+ };
+
+ internal_phy2: phy@2 {
+ reg = <2>;
+ };
+
+ internal_phy3: phy@3 {
+ reg = <3>;
+ };
+ };
+ };
+ };
--
2.45.2
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [net-next RFC PATCH 3/4] net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver
2024-10-21 13:01 [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support Christian Marangi
2024-10-21 13:01 ` [net-next RFC PATCH 1/4] net: mdio: implement mdio_mutex_nested guard() variant Christian Marangi
2024-10-21 13:01 ` [net-next RFC PATCH 2/4] dt-bindings: net: dsa: Add Airoha AN8855 Gigabit Switch documentation Christian Marangi
@ 2024-10-21 13:01 ` Christian Marangi
2024-10-21 14:08 ` Russell King (Oracle)
2024-10-21 13:01 ` [net-next RFC PATCH 4/4] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY Christian Marangi
2024-10-21 13:36 ` [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support Vladimir Oltean
4 siblings, 1 reply; 11+ messages in thread
From: Christian Marangi @ 2024-10-21 13:01 UTC (permalink / raw)
To: Christian Marangi, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Heiner Kallweit,
Russell King, Matthias Brugger, AngeloGioacchino Del Regno,
linux-arm-kernel, linux-mediatek, netdev, devicetree,
linux-kernel
Add Airoha AN8855 5-Port Gigabit DSA switch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
MAINTAINERS | 10 +
drivers/net/dsa/Kconfig | 9 +
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/an8855.c | 2008 ++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/an8855.h | 492 ++++++++++
5 files changed, 2520 insertions(+)
create mode 100644 drivers/net/dsa/an8855.c
create mode 100644 drivers/net/dsa/an8855.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 16933f9faa0f..e3077d9feee2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -717,6 +717,16 @@ S: Supported
F: fs/aio.c
F: include/linux/*aio*.h
+AIROHA DSA DRIVER
+M: Christian Marangi <ansuelsmth@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
+L: netdev@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/net/dsa/airoha,an8855.yaml
+F: drivers/net/dsa/an8855.c
+F: drivers/net/dsa/an8855.h
+
AIROHA ETHERNET DRIVER
M: Lorenzo Bianconi <lorenzo@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 2d10b4d6cfbb..6b6d0b7bae72 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -24,6 +24,15 @@ config NET_DSA_LOOP
This enables support for a fake mock-up switch chip which
exercises the DSA APIs.
+
+config NET_DSA_AN8855
+ tristate "Airoha AN8855 Ethernet switch support"
+ depends on NET_DSA
+ select NET_DSA_TAG_MTK
+ help
+ This enables support for the Airoha AN8855 Ethernet switch
+ chip.
+
source "drivers/net/dsa/hirschmann/Kconfig"
config NET_DSA_LANTIQ_GSWIP
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index cb9a97340e58..a74afb41a491 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_LOOP) += dsa_loop.o
ifdef CONFIG_NET_DSA_LOOP
obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdinfo.o
endif
+obj-$(CONFIG_NET_DSA_AN8855) += an8855.o
obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o
diff --git a/drivers/net/dsa/an8855.c b/drivers/net/dsa/an8855.c
new file mode 100644
index 000000000000..67e5d647a465
--- /dev/null
+++ b/drivers/net/dsa/an8855.c
@@ -0,0 +1,2008 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Airoha AN8855 DSA Switch driver
+ * Copyright (C) 2023 Min Yao <min.yao@airoha.com>
+ * Copyright (C) 2024 Christian Marangi <ansuelsmth@gmail.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/gpio/consumer.h>
+#include <linux/if_bridge.h>
+#include <linux/iopoll.h>
+#include <linux/mdio.h>
+#include <linux/netdevice.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/phylink.h>
+#include <linux/regmap.h>
+#include <net/dsa.h>
+
+#include "an8855.h"
+
+static const struct an8855_mib_desc an8855_mib[] = {
+ MIB_DESC(1, 0x00, "TxDrop"),
+ MIB_DESC(1, 0x04, "TxCrcErr"),
+ MIB_DESC(1, 0x08, "TxUnicast"),
+ MIB_DESC(1, 0x0c, "TxMulticast"),
+ MIB_DESC(1, 0x10, "TxBroadcast"),
+ MIB_DESC(1, 0x14, "TxCollision"),
+ MIB_DESC(1, 0x18, "TxSingleCollision"),
+ MIB_DESC(1, 0x1c, "TxMultipleCollision"),
+ MIB_DESC(1, 0x20, "TxDeferred"),
+ MIB_DESC(1, 0x24, "TxLateCollision"),
+ MIB_DESC(1, 0x28, "TxExcessiveCollistion"),
+ MIB_DESC(1, 0x2c, "TxPause"),
+ MIB_DESC(1, 0x30, "TxPktSz64"),
+ MIB_DESC(1, 0x34, "TxPktSz65To127"),
+ MIB_DESC(1, 0x38, "TxPktSz128To255"),
+ MIB_DESC(1, 0x3c, "TxPktSz256To511"),
+ MIB_DESC(1, 0x40, "TxPktSz512To1023"),
+ MIB_DESC(1, 0x44, "TxPktSz1024To1518"),
+ MIB_DESC(1, 0x48, "TxPktSz1519ToMax"),
+ MIB_DESC(2, 0x4c, "TxBytes"),
+ MIB_DESC(1, 0x54, "TxOversizeDrop"),
+ MIB_DESC(2, 0x58, "TxBadPktBytes"),
+ MIB_DESC(1, 0x80, "RxDrop"),
+ MIB_DESC(1, 0x84, "RxFiltering"),
+ MIB_DESC(1, 0x88, "RxUnicast"),
+ MIB_DESC(1, 0x8c, "RxMulticast"),
+ MIB_DESC(1, 0x90, "RxBroadcast"),
+ MIB_DESC(1, 0x94, "RxAlignErr"),
+ MIB_DESC(1, 0x98, "RxCrcErr"),
+ MIB_DESC(1, 0x9c, "RxUnderSizeErr"),
+ MIB_DESC(1, 0xa0, "RxFragErr"),
+ MIB_DESC(1, 0xa4, "RxOverSzErr"),
+ MIB_DESC(1, 0xa8, "RxJabberErr"),
+ MIB_DESC(1, 0xac, "RxPause"),
+ MIB_DESC(1, 0xb0, "RxPktSz64"),
+ MIB_DESC(1, 0xb4, "RxPktSz65To127"),
+ MIB_DESC(1, 0xb8, "RxPktSz128To255"),
+ MIB_DESC(1, 0xbc, "RxPktSz256To511"),
+ MIB_DESC(1, 0xc0, "RxPktSz512To1023"),
+ MIB_DESC(1, 0xc4, "RxPktSz1024To1518"),
+ MIB_DESC(1, 0xc8, "RxPktSz1519ToMax"),
+ MIB_DESC(2, 0xcc, "RxBytes"),
+ MIB_DESC(1, 0xd4, "RxCtrlDrop"),
+ MIB_DESC(1, 0xd8, "RxIngressDrop"),
+ MIB_DESC(1, 0xdc, "RxArlDrop"),
+ MIB_DESC(1, 0xe0, "FlowControlDrop"),
+ MIB_DESC(1, 0xe4, "WredDrop"),
+ MIB_DESC(1, 0xe8, "MirrorDrop"),
+ MIB_DESC(2, 0xec, "RxBadPktBytes"),
+ MIB_DESC(1, 0xf4, "RxsFlowSamplingPktDrop"),
+ MIB_DESC(1, 0xf8, "RxsFlowTotalPktDrop"),
+ MIB_DESC(1, 0xfc, "PortControlDrop"),
+};
+
+static const u8 dsa_r50ohm_table[] = {
+ 127, 127, 127, 127, 127, 127, 127, 127, 127, 127,
+ 127, 127, 127, 127, 127, 127, 127, 126, 122, 117,
+ 112, 109, 104, 101, 97, 94, 90, 88, 84, 80,
+ 78, 74, 72, 68, 66, 64, 61, 58, 56, 53,
+ 51, 48, 47, 44, 42, 40, 38, 36, 34, 32,
+ 31, 28, 27, 24, 24, 22, 20, 18, 16, 16,
+ 14, 12, 11, 9
+};
+
+static u8 en8855_get_r50ohm_val(u8 shift_sel)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dsa_r50ohm_table); i++)
+ if (dsa_r50ohm_table[i] == shift_sel)
+ break;
+
+ if (i < 8 || i >= ARRAY_SIZE(dsa_r50ohm_table))
+ return dsa_r50ohm_table[25];
+
+ return dsa_r50ohm_table[i - 8];
+}
+
+static int an8855_mii_read32(struct mii_bus *bus, u8 phy_id, u32 reg, u32 *val)
+{
+ u16 lo, hi;
+ int ret;
+
+ ret = bus->write(bus, phy_id, 0x1f, 0x4);
+ ret = bus->write(bus, phy_id, 0x10, 0);
+
+ ret = bus->write(bus, phy_id, 0x15, ((reg >> 16) & 0xFFFF));
+ ret = bus->write(bus, phy_id, 0x16, (reg & 0xFFFF));
+ if (ret < 0) {
+ dev_err_ratelimited(&bus->dev,
+ "failed to read an8855 register\n");
+ return ret;
+ }
+
+ lo = bus->read(bus, phy_id, 0x18);
+ hi = bus->read(bus, phy_id, 0x17);
+
+ ret = bus->write(bus, phy_id, 0x1f, 0);
+ if (ret < 0) {
+ dev_err_ratelimited(&bus->dev,
+ "failed to read an8855 register\n");
+ return ret;
+ }
+
+ *val = (hi << 16) | (lo & 0xffff);
+
+ return 0;
+}
+
+static int an8855_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
+{
+ struct an8855_priv *priv = ctx;
+ struct mii_bus *bus = priv->bus;
+ int ret;
+
+ scoped_guard(mdio_mutex_nested, &bus->mdio_lock)
+ ret = an8855_mii_read32(bus, priv->phy_base,
+ reg, val);
+
+ return ret < 0 ? ret : 0;
+}
+
+static int an8855_mii_write32(struct mii_bus *bus, u8 phy_id, u32 reg, u32 val)
+{
+ int ret;
+
+ ret = bus->write(bus, phy_id, 0x1f, 0x4);
+ ret = bus->write(bus, phy_id, 0x10, 0);
+
+ ret = bus->write(bus, phy_id, 0x11, ((reg >> 16) & 0xFFFF));
+ ret = bus->write(bus, phy_id, 0x12, (reg & 0xFFFF));
+
+ ret = bus->write(bus, phy_id, 0x13, ((val >> 16) & 0xFFFF));
+ ret = bus->write(bus, phy_id, 0x14, (val & 0xFFFF));
+
+ ret = bus->write(bus, phy_id, 0x1f, 0);
+ if (ret < 0)
+ dev_err_ratelimited(&bus->dev,
+ "failed to write an8855 register\n");
+
+ return 0;
+}
+
+static int
+an8855_regmap_write(void *ctx, uint32_t reg, uint32_t val)
+{
+ struct an8855_priv *priv = ctx;
+ struct mii_bus *bus = priv->bus;
+ int ret;
+
+ scoped_guard(mdio_mutex_nested, &bus->mdio_lock)
+ ret = an8855_mii_write32(priv->bus, priv->phy_base,
+ reg, val);
+
+ return ret < 0 ? ret : 0;
+}
+
+static int
+an8855_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val)
+{
+ struct an8855_priv *priv = ctx;
+ struct mii_bus *bus = priv->bus;
+ u32 val;
+ int ret;
+
+ scoped_guard(mdio_mutex_nested, &bus->mdio_lock) {
+ ret = an8855_mii_read32(bus, priv->phy_base, reg, &val);
+ val &= ~mask;
+ val |= write_val;
+ ret = an8855_mii_write32(bus, priv->phy_base, reg, val);
+ }
+
+ return ret < 0 ? ret : 0;
+}
+
+static const struct regmap_range an8855_readable_ranges[] = {
+ regmap_reg_range(0x10000000, 0x10000fff), /* SCU */
+ regmap_reg_range(0x10001000, 0x10001fff), /* RBUS */
+ regmap_reg_range(0x10002000, 0x10002fff), /* MCU */
+ regmap_reg_range(0x10005000, 0x10005fff), /* SYS SCU */
+ regmap_reg_range(0x10007000, 0x10007fff), /* I2C Slave */
+ regmap_reg_range(0x10008000, 0x10008fff), /* I2C Master */
+ regmap_reg_range(0x10009000, 0x10009fff), /* PDMA */
+ regmap_reg_range(0x1000a100, 0x1000a2ff), /* General Purpose Timer */
+ regmap_reg_range(0x1000a200, 0x1000a2ff), /* GPU timer */
+ regmap_reg_range(0x1000a300, 0x1000a3ff), /* GPIO */
+ regmap_reg_range(0x1000a400, 0x1000a4ff), /* EFUSE */
+ regmap_reg_range(0x1000c000, 0x1000cfff), /* GDMP CSR */
+ regmap_reg_range(0x10010000, 0x1001ffff), /* GDMP SRAM */
+ regmap_reg_range(0x10200000, 0x10203fff), /* Switch - ARL Global */
+ regmap_reg_range(0x10204000, 0x10207fff), /* Switch - BMU */
+ regmap_reg_range(0x10208000, 0x1020bfff), /* Switch - ARL Port */
+ regmap_reg_range(0x1020c000, 0x1020cfff), /* Switch - SCH */
+ regmap_reg_range(0x10210000, 0x10213fff), /* Switch - MAC */
+ regmap_reg_range(0x10214000, 0x10217fff), /* Switch - MIB */
+ regmap_reg_range(0x10218000, 0x1021bfff), /* Switch - Port Control */
+ regmap_reg_range(0x1021c000, 0x1021ffff), /* Switch - TOP */
+ regmap_reg_range(0x10220000, 0x1022ffff), /* SerDes */
+ regmap_reg_range(0x10286000, 0x10286fff), /* RG Batcher */
+ regmap_reg_range(0x1028c000, 0x1028ffff), /* ETHER_SYS */
+ regmap_reg_range(0x30000000, 0x37ffffff), /* I2C EEPROM */
+ regmap_reg_range(0x38000000, 0x3fffffff), /* BOOT_ROM */
+ regmap_reg_range(0xa0000000, 0xbfffffff), /* GPHY */
+};
+
+const struct regmap_access_table an8855_readable_table = {
+ .yes_ranges = an8855_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(an8855_readable_ranges),
+};
+
+static const struct regmap_config an8855_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0xbfffffff, /* TODO */
+ .reg_read = an8855_regmap_read,
+ .reg_write = an8855_regmap_write,
+ .reg_update_bits = an8855_regmap_update_bits,
+ .disable_locking = true,
+ .rd_table = &an8855_readable_table,
+};
+
+static int
+an8855_mib_init(struct an8855_priv *priv)
+{
+ int ret;
+
+ ret = regmap_write(priv->regmap, AN8855_MIB_CCR, AN8855_CCR_MIB_ENABLE);
+ if (ret)
+ return ret;
+
+ return regmap_write(priv->regmap, AN8855_MIB_CCR, AN8855_CCR_MIB_ACTIVATE);
+}
+
+static void an8855_fdb_write(struct an8855_priv *priv, u16 vid,
+ u8 port_mask, const u8 *mac, bool add)
+{
+ u32 mac_reg[2] = { };
+ u32 reg;
+
+ mac_reg[0] |= FIELD_PREP(AN8855_ATA1_MAC0, mac[0]);
+ mac_reg[0] |= FIELD_PREP(AN8855_ATA1_MAC1, mac[1]);
+ mac_reg[0] |= FIELD_PREP(AN8855_ATA1_MAC2, mac[2]);
+ mac_reg[0] |= FIELD_PREP(AN8855_ATA1_MAC3, mac[3]);
+ mac_reg[1] |= FIELD_PREP(AN8855_ATA2_MAC4, mac[4]);
+ mac_reg[1] |= FIELD_PREP(AN8855_ATA2_MAC5, mac[5]);
+
+ regmap_bulk_write(priv->regmap, AN8855_ATA1, mac_reg,
+ ARRAY_SIZE(mac_reg));
+
+ reg = AN8855_ATWD_IVL;
+ if (add)
+ reg |= AN8855_ATWD_VLD;
+ reg |= FIELD_PREP(AN8855_ATWD_VID, vid);
+ regmap_write(priv->regmap, AN8855_ATWD, reg);
+ regmap_write(priv->regmap, AN8855_ATWD2,
+ FIELD_PREP(AN8855_ATWD2_PORT, port_mask));
+}
+
+static void an8855_fdb_read(struct an8855_priv *priv, struct an8855_fdb *fdb)
+{
+ u32 reg[4];
+
+ regmap_bulk_read(priv->regmap, AN8855_ATRD0, reg,
+ ARRAY_SIZE(reg));
+
+ fdb->live = FIELD_GET(AN8855_ATRD0_LIVE, reg[0]);
+ fdb->type = FIELD_GET(AN8855_ATRD0_TYPE, reg[0]);
+ fdb->ivl = FIELD_GET(AN8855_ATRD0_IVL, reg[0]);
+ fdb->vid = FIELD_GET(AN8855_ATRD0_VID, reg[0]);
+ fdb->fid = FIELD_GET(AN8855_ATRD0_FID, reg[0]);
+ fdb->aging = FIELD_GET(AN8855_ATRD1_AGING, reg[1]);
+ fdb->port_mask = FIELD_GET(AN8855_ATRD3_PORTMASK, reg[3]);
+ fdb->mac[0] = FIELD_GET(AN8855_ATRD2_MAC0, reg[2]);
+ fdb->mac[1] = FIELD_GET(AN8855_ATRD2_MAC1, reg[2]);
+ fdb->mac[2] = FIELD_GET(AN8855_ATRD2_MAC2, reg[2]);
+ fdb->mac[3] = FIELD_GET(AN8855_ATRD2_MAC3, reg[2]);
+ fdb->mac[4] = FIELD_GET(AN8855_ATRD1_MAC4, reg[1]);
+ fdb->mac[5] = FIELD_GET(AN8855_ATRD1_MAC5, reg[1]);
+ fdb->noarp = !!FIELD_GET(AN8855_ATRD0_ARP, reg[0]);
+}
+
+static int an8855_fdb_cmd(struct an8855_priv *priv, u32 cmd, u32 *rsp)
+{
+ u32 val;
+ int ret;
+
+ /* Set the command operating upon the MAC address entries */
+ val = AN8855_ATC_BUSY | cmd;
+ ret = regmap_write(priv->regmap, AN8855_ATC, val);
+ if (ret)
+ return ret;
+
+ ret = regmap_read_poll_timeout(priv->regmap, AN8855_ATC, val,
+ !(val & AN8855_ATC_BUSY), 20, 200000);
+ if (ret)
+ return ret;
+
+ if (rsp)
+ *rsp = val;
+
+ return 0;
+}
+
+static void
+an8855_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+ struct an8855_priv *priv = ds->priv;
+ u32 stp_state;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ stp_state = AN8855_STP_DISABLED;
+ break;
+ case BR_STATE_BLOCKING:
+ stp_state = AN8855_STP_BLOCKING;
+ break;
+ case BR_STATE_LISTENING:
+ stp_state = AN8855_STP_LISTENING;
+ break;
+ case BR_STATE_LEARNING:
+ stp_state = AN8855_STP_LEARNING;
+ break;
+ case BR_STATE_FORWARDING:
+ default:
+ stp_state = AN8855_STP_FORWARDING;
+ break;
+ }
+
+ regmap_update_bits(priv->regmap, AN8855_SSP_P(port), AN8855_FID_PST,
+ stp_state);
+}
+
+static int an8855_port_bridge_join(struct dsa_switch *ds, int port,
+ struct dsa_bridge bridge,
+ bool *tx_fwd_offload,
+ struct netlink_ext_ack *extack)
+{
+ struct an8855_priv *priv = ds->priv;
+ u32 port_mask = BIT(AN8855_CPU_PORT);
+ struct dsa_port *dp;
+ int ret;
+
+ dsa_switch_for_each_port(dp, ds) {
+ if (dp->index == port)
+ continue;
+
+ if (dsa_port_is_cpu(dp))
+ continue;
+
+ if (!dsa_port_offloads_bridge_dev(dp, bridge.dev))
+ continue;
+
+ /* Add this port to the portvlan mask of the other
+ * ports in the bridge
+ */
+ port_mask |= BIT(dp->index);
+ ret = regmap_set_bits(priv->regmap, AN8855_PORTMATRIX_P(dp->index),
+ FIELD_PREP(AN8855_PORTMATRIX, port));
+ if (ret)
+ return ret;
+ }
+
+ /* Add all other ports to this port's portvlan mask */
+ return regmap_update_bits(priv->regmap, AN8855_PORTMATRIX_P(port),
+ AN8855_PORTMATRIX, port_mask);
+}
+
+static void an8855_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct dsa_bridge bridge)
+{
+ struct an8855_priv *priv = ds->priv;
+ struct dsa_port *dp;
+ u32 port_mask = 0;
+
+ dsa_switch_for_each_port(dp, ds) {
+ if (dp->index == port)
+ continue;
+
+ if (dsa_port_is_cpu(dp))
+ continue;
+
+ if (!dsa_port_offloads_bridge_dev(dp, bridge.dev))
+ continue;
+
+ /* Remove this port from the portvlan mask of the other
+ * ports in the bridge
+ */
+ port_mask |= BIT(dp->index);
+ regmap_clear_bits(priv->regmap, AN8855_PORTMATRIX_P(dp->index),
+ FIELD_PREP(AN8855_PORTMATRIX, port));
+ }
+
+ /* Remove all other ports from this port's portvlan mask */
+ regmap_update_bits(priv->regmap, AN8855_PORTMATRIX_P(port),
+ AN8855_PORTMATRIX,
+ FIELD_PREP(AN8855_PORTMATRIX, ~port_mask));
+}
+
+static int an8855_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db)
+{
+ struct an8855_priv *priv = ds->priv;
+ u8 port_mask = BIT(port);
+ int ret;
+
+ scoped_guard(mutex, &priv->reg_mutex) {
+ an8855_fdb_write(priv, vid, port_mask, addr, 1);
+ ret = an8855_fdb_cmd(priv, AN8855_FDB_WRITE, NULL);
+ }
+
+ return ret;
+}
+
+static int an8855_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db)
+{
+ struct an8855_priv *priv = ds->priv;
+ u8 port_mask = BIT(port);
+ int ret;
+
+ scoped_guard(mutex, &priv->reg_mutex) {
+ an8855_fdb_write(priv, vid, port_mask, addr, 0);
+ ret = an8855_fdb_cmd(priv, AN8855_FDB_WRITE, NULL);
+ }
+
+ return ret;
+}
+
+static int an8855_port_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data)
+{
+ struct an8855_priv *priv = ds->priv;
+ struct an8855_fdb _fdb = { };
+ int banks, count = 0;
+ u32 rsp;
+ int ret;
+ int i;
+
+ mutex_lock(&priv->reg_mutex);
+
+ /* Load search port */
+ ret = regmap_write(priv->regmap, AN8855_ATWD2,
+ FIELD_PREP(AN8855_ATWD2_PORT, port));
+ if (ret)
+ goto exit;
+ ret = an8855_fdb_cmd(priv, AN8855_ATC_MAT(AND8855_FDB_MAT_MAC_PORT) |
+ AN8855_FDB_START, &rsp);
+ if (ret < 0)
+ goto exit;
+
+ do {
+ /* From response get the number of banks to read, exit if 0 */
+ banks = FIELD_GET(AN8855_ATC_HIT, rsp);
+ if (!banks)
+ break;
+
+ /* Each banks have 4 entry */
+ for (i = 0; i < 4; i++) {
+ count++;
+
+ /* Check if bank is present */
+ if (!(banks & BIT(i)))
+ continue;
+
+ /* Select bank entry index */
+ ret = regmap_write(priv->regmap, AN8855_ATRDS,
+ FIELD_PREP(AN8855_ATRD_SEL, i));
+ if (ret)
+ break;
+ /* wait 1ms for the bank entry to be filled */
+ usleep_range(1000, 1500);
+ an8855_fdb_read(priv, &_fdb);
+
+ if (!_fdb.live)
+ continue;
+ ret = cb(_fdb.mac, _fdb.vid, _fdb.noarp, data);
+ if (ret < 0)
+ break;
+ }
+
+ /* Stop if reached max FDB number */
+ if (count >= AN8855_NUM_FDB_RECORDS)
+ break;
+
+ /* Read next bank */
+ ret = an8855_fdb_cmd(priv, AN8855_ATC_MAT(AND8855_FDB_MAT_MAC_PORT) |
+ AN8855_FDB_NEXT, &rsp);
+ if (ret < 0)
+ break;
+ } while (true);
+
+exit:
+ mutex_unlock(&priv->reg_mutex);
+ return ret;
+}
+
+static int an8855_vlan_cmd(struct an8855_priv *priv, enum an8855_vlan_cmd cmd,
+ u16 vid)
+{
+ u32 val;
+ int ret;
+
+ val = AN8855_VTCR_BUSY | FIELD_PREP(AN8855_VTCR_FUNC, cmd) |
+ FIELD_PREP(AN8855_VTCR_VID, vid);
+ ret = regmap_write(priv->regmap, AN8855_VTCR, val);
+ if (ret)
+ return ret;
+
+ return regmap_read_poll_timeout(priv->regmap, AN8855_VTCR, val,
+ !(val & AN8855_VTCR_BUSY), 20, 200000);
+}
+
+static int an8855_vlan_add(struct an8855_priv *priv, u8 port, u16 vid,
+ bool untagged)
+{
+ u32 port_mask;
+ u32 val;
+ int ret;
+
+ /* Fetch entry */
+ ret = an8855_vlan_cmd(priv, AN8855_VTCR_RD_VID, vid);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(priv->regmap, AN8855_VARD0, &val);
+ if (ret)
+ return ret;
+ port_mask = FIELD_GET(AN8855_VA0_PORT, val) | BIT(port);
+
+ /* Validate the entry with independent learning, create egress tag per
+ * VLAN and joining the port as one of the port members.
+ */
+ val = (val & AN8855_VA0_ETAG) | AN8855_VA0_IVL_MAC |
+ AN8855_VA0_VTAG_EN | AN8855_VA0_VLAN_VALID |
+ FIELD_PREP(AN8855_VA0_PORT, port_mask);
+ ret = regmap_write(priv->regmap, AN8855_VAWD0, val);
+ if (ret)
+ return ret;
+ ret = regmap_write(priv->regmap, AN8855_VAWD1, 0);
+ if (ret)
+ return ret;
+
+ /* CPU port is always taken as a tagged port for serving more than one
+ * VLANs across and also being applied with egress type stack mode for
+ * that VLAN tags would be appended after hardware special tag used as
+ * DSA tag.
+ */
+ if (port == AN8855_CPU_PORT)
+ val = AN8855_VLAN_EGRESS_STACK;
+ /* Decide whether adding tag or not for those outgoing packets from the
+ * port inside the VLAN.
+ */
+ else
+ val = untagged ? AN8855_VLAN_EGRESS_UNTAG : AN8855_VLAN_EGRESS_TAG;
+ ret = regmap_update_bits(priv->regmap, AN8855_VAWD0,
+ AN8855_VA0_ETAG_PORT_MASK(port),
+ AN8855_VA0_ETAG_PORT_VAL(port, val));
+ if (ret)
+ return ret;
+
+ /* Flush result to hardware */
+ return an8855_vlan_cmd(priv, AN8855_VTCR_WR_VID, vid);
+}
+
+static int an8855_vlan_del(struct an8855_priv *priv, u8 port, u16 vid)
+{
+ u32 port_mask;
+ u32 val;
+ int ret;
+
+ /* Fetch entry */
+ ret = an8855_vlan_cmd(priv, AN8855_VTCR_RD_VID, vid);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(priv->regmap, AN8855_VARD0, &val);
+ if (ret)
+ return ret;
+ port_mask = FIELD_GET(AN8855_VA0_PORT, val) & ~BIT(port);
+
+ if (!(val & AN8855_VA0_VLAN_VALID)) {
+ dev_err(priv->dev, "Cannot be deleted due to invalid entry\n");
+ return -EINVAL;
+ }
+
+ if (port_mask) {
+ val = (val & AN8855_VA0_ETAG) | AN8855_VA0_IVL_MAC |
+ AN8855_VA0_VTAG_EN | AN8855_VA0_VLAN_VALID |
+ FIELD_PREP(AN8855_VA0_PORT, port_mask);
+ ret = regmap_write(priv->regmap, AN8855_VAWD0, val);
+ if (ret)
+ return ret;
+ } else {
+ ret = regmap_write(priv->regmap, AN8855_VAWD0, 0);
+ if (ret)
+ return ret;
+ }
+ ret = regmap_write(priv->regmap, AN8855_VAWD1, 0);
+ if (ret)
+ return ret;
+
+ /* Flush result to hardware */
+ return an8855_vlan_cmd(priv, AN8855_VTCR_WR_VID, vid);
+}
+
+static int an8855_port_set_vlan_mode(struct an8855_priv *priv, int port,
+ enum an8855_port_mode port_mode,
+ enum an8855_vlan_port_eg_tag eg_tag,
+ enum an8855_vlan_port_attr vlan_attr)
+{
+ int ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_PCR_P(port),
+ AN8855_PORT_VLAN,
+ FIELD_PREP(AN8855_PORT_VLAN, port_mode));
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(priv->regmap, AN8855_PVC_P(port),
+ AN8855_PVC_EG_TAG | AN8855_VLAN_ATTR,
+ FIELD_PREP(AN8855_PVC_EG_TAG, eg_tag) |
+ FIELD_PREP(AN8855_VLAN_ATTR, vlan_attr));
+}
+
+static int an8855_port_vlan_filtering(struct dsa_switch *ds, int port,
+ bool vlan_filtering,
+ struct netlink_ext_ack *extack)
+{
+ struct an8855_priv *priv = ds->priv;
+ int ret;
+
+ /* The port is being kept as VLAN-unaware port when bridge is
+ * set up with vlan_filtering not being set, Otherwise, the
+ * port and the corresponding CPU port is required the setup
+ * for becoming a VLAN-aware port.
+ */
+ if (vlan_filtering) {
+ /* CPU port is set to fallback mode to let untagged
+ * frames pass through.
+ */
+ ret = an8855_port_set_vlan_mode(priv, AN8855_CPU_PORT,
+ AN8855_PORT_FALLBACK_MODE,
+ AN8855_VLAN_EG_DISABLED,
+ AN8855_VLAN_USER);
+ if (ret)
+ return ret;
+
+ /* Trapped into security mode allows packet forwarding through VLAN
+ * table lookup.
+ * Set the port as a user port which is to be able to recognize VID
+ * from incoming packets before fetching entry within the VLAN table.
+ */
+ ret = an8855_port_set_vlan_mode(priv, port,
+ AN8855_PORT_SECURITY_MODE,
+ AN8855_VLAN_EG_DISABLED,
+ AN8855_VLAN_USER);
+ if (ret)
+ return ret;
+ } else {
+ bool disable_cpu_vlan = true;
+ struct dsa_port *dp;
+
+ /* When a port is removed from the bridge, the port would be set up
+ * back to the default as is at initial boot which is a VLAN-unaware
+ * port.
+ */
+ ret = an8855_port_set_vlan_mode(priv, port, AN8855_PORT_MATRIX_MODE,
+ AN8855_VLAN_EG_CONSISTENT,
+ AN8855_VLAN_TRANSPARENT);
+ if (ret)
+ return ret;
+
+ dsa_switch_for_each_user_port(dp, ds) {
+ if (dsa_port_is_vlan_filtering(dp)) {
+ disable_cpu_vlan = false;
+ break;
+ }
+ }
+
+ if (disable_cpu_vlan) {
+ ret = an8855_port_set_vlan_mode(priv, AN8855_CPU_PORT,
+ AN8855_PORT_MATRIX_MODE,
+ AN8855_VLAN_EG_CONSISTENT,
+ AN8855_VLAN_TRANSPARENT);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int an8855_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack)
+{
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+ struct an8855_priv *priv = ds->priv;
+ int ret;
+
+ scoped_guard(mutex, &priv->reg_mutex)
+ ret = an8855_vlan_add(priv, port, vlan->vid, untagged);
+ if (ret)
+ return ret;
+
+ if (pvid) {
+ ret = regmap_update_bits(priv->regmap, AN8855_PVID_P(port),
+ AN8855_G0_PORT_VID,
+ FIELD_PREP(AN8855_G0_PORT_VID, vlan->vid));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int an8855_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct an8855_priv *priv = ds->priv;
+ u32 val;
+ int ret;
+
+ scoped_guard(mutex, &priv->reg_mutex)
+ ret = an8855_vlan_del(priv, port, vlan->vid);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(priv->regmap, AN8855_PVID_P(port), &val);
+ if (ret)
+ return ret;
+ if (FIELD_GET(AN8855_G0_PORT_VID, val) == vlan->vid) {
+ ret = regmap_update_bits(priv->regmap, AN8855_PVID_P(port),
+ AN8855_G0_PORT_VID,
+ FIELD_PREP(AN8855_G0_PORT_VID,
+ AN8855_PORT_VID_DEFAULT));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void
+an8855_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data)
+{
+ int i;
+
+ if (stringset != ETH_SS_STATS)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(an8855_mib); i++)
+ ethtool_puts(&data, an8855_mib[i].name);
+}
+
+static void
+an8855_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
+{
+ struct an8855_priv *priv = ds->priv;
+ const struct an8855_mib_desc *mib;
+ u32 reg, i, val;
+ u32 hi;
+
+ for (i = 0; i < ARRAY_SIZE(an8855_mib); i++) {
+ mib = &an8855_mib[i];
+ reg = AN8855_PORT_MIB_COUNTER(port) + mib->offset;
+
+ regmap_read(priv->regmap, reg, &val);
+ if (mib->size == 2)
+ regmap_read(priv->regmap, reg + 4, &hi);
+
+ data[i] = val;
+ if (mib->size == 2)
+ data[i] |= (u64)hi << 32;
+ }
+}
+
+static int
+an8855_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+ if (sset != ETH_SS_STATS)
+ return 0;
+
+ return ARRAY_SIZE(an8855_mib);
+}
+
+static int an8855_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress,
+ struct netlink_ext_ack *extack)
+{
+ struct an8855_priv *priv = ds->priv;
+ int monitor_port;
+ u32 val;
+ int ret;
+
+ /* Check for existent entry */
+ if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
+ return -EEXIST;
+
+ ret = regmap_read(priv->regmap, AN8855_MIR, &val);
+ if (ret)
+ return ret;
+
+ /* AN8855 supports 4 monitor port, but only use first group */
+ monitor_port = FIELD_GET(AN8855_MIRROR_PORT, val);
+ if (val & AN8855_MIRROR_EN && monitor_port != mirror->to_local_port)
+ return -EEXIST;
+
+ val = AN8855_MIRROR_EN;
+ val |= FIELD_PREP(AN8855_MIRROR_PORT, mirror->to_local_port);
+ ret = regmap_update_bits(priv->regmap, AN8855_MIR,
+ AN8855_MIRROR_EN | AN8855_MIRROR_PORT,
+ val);
+ if (ret)
+ return ret;
+
+ ret = regmap_set_bits(priv->regmap, AN8855_PCR_P(port),
+ ingress ? AN8855_PORT_RX_MIR : AN8855_PORT_TX_MIR);
+ if (ret)
+ return ret;
+
+ if (ingress)
+ priv->mirror_rx |= BIT(port);
+ else
+ priv->mirror_tx |= BIT(port);
+
+ return 0;
+}
+
+static void an8855_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror)
+{
+ struct an8855_priv *priv = ds->priv;
+
+ if (mirror->ingress)
+ priv->mirror_rx &= ~BIT(port);
+ else
+ priv->mirror_tx &= ~BIT(port);
+
+ regmap_clear_bits(priv->regmap, AN8855_PCR_P(port),
+ mirror->ingress ? AN8855_PORT_RX_MIR :
+ AN8855_PORT_TX_MIR);
+
+ if (!priv->mirror_rx && !priv->mirror_tx)
+ regmap_clear_bits(priv->regmap, AN8855_MIR, AN8855_MIRROR_EN);
+}
+
+static int an8855_port_set_status(struct an8855_priv *priv, int port,
+ bool enable)
+{
+ if (enable)
+ return regmap_set_bits(priv->regmap, AN8855_PMCR_P(port),
+ AN8855_PMCR_TX_EN | AN8855_PMCR_RX_EN);
+ else
+ return regmap_clear_bits(priv->regmap, AN8855_PMCR_P(port),
+ AN8855_PMCR_TX_EN | AN8855_PMCR_RX_EN);
+}
+
+static int an8855_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ int ret;
+
+ ret = an8855_port_set_status(ds->priv, port, true);
+ if (ret)
+ return ret;
+
+ if (dsa_is_user_port(ds, port))
+ phy_support_asym_pause(phy);
+
+ return 0;
+}
+
+static void an8855_port_disable(struct dsa_switch *ds, int port)
+{
+ an8855_port_set_status(ds->priv, port, false);
+}
+
+static int an8855_set_mac_eee(struct dsa_switch *ds, int port,
+ struct ethtool_keee *eee)
+{
+ struct an8855_priv *priv = ds->priv;
+ u32 reg;
+ int ret;
+
+ if (eee->eee_enabled) {
+ ret = regmap_read(priv->regmap, AN8855_PMCR_P(port), ®);
+ if (ret)
+ return ret;
+ if (reg & AN8855_PMCR_FORCE_MODE) {
+ switch (reg & AN8855_PMCR_FORCE_SPEED) {
+ case AN8855_PMCR_FORCE_SPEED_1000:
+ reg |= AN8855_PMCR_FORCE_EEE1G;
+ break;
+ case AN8855_PMCR_FORCE_SPEED_100:
+ reg |= AN8855_PMCR_FORCE_EEE100;
+ break;
+ default:
+ break;
+ }
+ ret = regmap_write(priv->regmap, AN8855_PMCR_P(port), reg);
+ if (ret)
+ return ret;
+ }
+ if (eee->tx_lpi_enabled) {
+ ret = regmap_set_bits(priv->regmap, AN8855_PMEEECR_P(port),
+ AN8855_LPI_MODE_EN);
+ if (ret)
+ return ret;
+ } else {
+ ret = regmap_clear_bits(priv->regmap, AN8855_PMEEECR_P(port),
+ AN8855_LPI_MODE_EN);
+ if (ret)
+ return ret;
+ }
+ } else {
+ ret = regmap_clear_bits(priv->regmap, AN8855_PMCR_P(port),
+ AN8855_PMCR_FORCE_EEE1G |
+ AN8855_PMCR_FORCE_EEE100);
+ if (ret)
+ return ret;
+
+ ret = regmap_clear_bits(priv->regmap, AN8855_PMEEECR_P(port),
+ AN8855_LPI_MODE_EN);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int an8855_get_mac_eee(struct dsa_switch *ds, int port,
+ struct ethtool_keee *eee)
+{
+ struct an8855_priv *priv = ds->priv;
+ u32 reg;
+ int ret;
+
+ ret = regmap_read(priv->regmap, AN8855_PMEEECR_P(port), ®);
+ if (ret)
+ return ret;
+ eee->tx_lpi_enabled = reg & AN8855_LPI_MODE_EN;
+
+ ret = regmap_read(priv->regmap, AN8855_CKGCR, ®);
+ if (ret)
+ return ret;
+ /* Global LPI TXIDLE Threshold, default 60ms (unit 2us) */
+ eee->tx_lpi_timer = FIELD_GET(AN8855_LPI_TXIDLE_THD_MASK, reg) / 500;
+
+ ret = regmap_read(priv->regmap, AN8855_PMSR_P(port), ®);
+ if (ret)
+ return ret;
+ eee->eee_active = reg & (AN8855_PMSR_EEE1G | AN8855_PMSR_EEE100M);
+
+ return 0;
+}
+
+static u32 en8855_get_phy_flags(struct dsa_switch *ds, int port)
+{
+ struct an8855_priv *priv = ds->priv;
+ u8 calibration_data[4] = { };
+ u8 shift_sel;
+ u32 val;
+ int ret;
+ int i;
+
+ /* PHY doesn't need calibration */
+ if (!priv->phy_require_calib)
+ return 0;
+
+ /* Read Calibration value */
+ for (i = 0; i < sizeof(u32); i++) {
+ ret = regmap_read(priv->regmap, AN8855_EFUSE_DATA0 +
+ ((3 + i + (4 * port)) * 4), &val);
+ if (ret)
+ return 0;
+
+ shift_sel = FIELD_GET(AN8855_EFUSE_R50O, val);
+ calibration_data[i] = en8855_get_r50ohm_val(shift_sel);
+ }
+
+ memcpy(&val, calibration_data, sizeof(u32));
+ return val;
+}
+
+static enum dsa_tag_protocol
+an8855_get_tag_protocol(struct dsa_switch *ds, int port,
+ enum dsa_tag_protocol mp)
+{
+ return DSA_TAG_PROTO_MTK;
+}
+
+static int an8855_phy_read(struct mii_bus *bus, int port, int regnum)
+{
+ struct an8855_priv *priv = bus->priv;
+
+ return mdiobus_read_nested(priv->bus, priv->phy_base + port,
+ regnum);
+}
+
+static int an8855_phy_write(struct mii_bus *bus, int port, int regnum, u16 val)
+{
+ struct an8855_priv *priv = bus->priv;
+
+ return mdiobus_write_nested(priv->bus, priv->phy_base + port,
+ regnum, val);
+}
+
+static int an8855_mdio_setup(struct an8855_priv *priv)
+{
+ struct dsa_switch *ds = priv->ds;
+ struct device *dev = priv->dev;
+ struct device_node *np;
+ struct mii_bus *bus;
+ int ret = 0;
+
+ np = of_get_child_by_name(priv->dev->of_node, "mdio");
+ if (!np || !of_device_is_available(np))
+ goto exit;
+
+ bus = devm_mdiobus_alloc(priv->dev);
+ if (!bus) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ bus->priv = priv;
+ bus->name = KBUILD_MODNAME "-mii";
+ snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d.%d",
+ ds->dst->index, ds->index);
+ bus->parent = dev;
+ bus->read = an8855_phy_read;
+ bus->write = an8855_phy_write;
+
+ ret = devm_of_mdiobus_register(dev, bus, np);
+ if (ret)
+ dev_err(dev, "failed to register MDIO bus: %d", ret);
+
+exit:
+ of_node_put(np);
+ return ret;
+}
+
+static int an8855_setup(struct dsa_switch *ds)
+{
+ struct an8855_priv *priv = ds->priv;
+ struct dsa_port *dp;
+ int ret;
+
+ /* Setup mdio BUS for internal PHY */
+ ret = an8855_mdio_setup(priv);
+ if (ret)
+ return ret;
+
+ /* Enable and reset MIB counters */
+ ret = an8855_mib_init(priv);
+ if (ret)
+ return ret;
+
+ dsa_switch_for_each_port(dp, ds) {
+ /* Disable forwarding by default on all ports */
+ ret = regmap_clear_bits(priv->regmap, AN8855_PORTMATRIX_P(dp->index),
+ AN8855_PORTMATRIX);
+ if (ret)
+ return ret;
+
+ /* Enable consistent egress tag */
+ ret = regmap_update_bits(priv->regmap, AN8855_PVC_P(dp->index),
+ AN8855_PVC_EG_TAG,
+ FIELD_PREP(AN8855_PVC_EG_TAG,
+ AN8855_VLAN_EG_CONSISTENT));
+ if (ret)
+ return ret;
+ }
+
+ /* Disable MAC by default on all user ports */
+ dsa_switch_for_each_user_port(dp, ds) {
+ ret = an8855_port_set_status(priv, dp->index, false);
+ if (ret)
+ return ret;
+ }
+
+ /* Enable Airoha header mode on the cpu port */
+ ret = regmap_write(priv->regmap, AN8855_PVC_P(AN8855_CPU_PORT),
+ AN8855_PORT_SPEC_REPLACE_MODE | AN8855_PORT_SPEC_TAG);
+ if (ret)
+ return ret;
+
+ /* Unknown multicast frame forwarding to the cpu port */
+ ret = regmap_write(priv->regmap, AN8855_UNMF, BIT(AN8855_CPU_PORT));
+ if (ret)
+ return ret;
+
+ /* Set CPU port number */
+ ret = regmap_update_bits(priv->regmap, AN8855_MFC,
+ AN8855_CPU_EN | AN8855_CPU_PORT_IDX,
+ AN8855_CPU_EN |
+ FIELD_PREP(AN8855_CPU_PORT_IDX, AN8855_CPU_PORT));
+ if (ret)
+ return ret;
+
+ /* CPU port gets connected to all user ports of
+ * the switch.
+ */
+ ret = regmap_write(priv->regmap, AN8855_PORTMATRIX_P(AN8855_CPU_PORT),
+ FIELD_PREP(AN8855_PORTMATRIX, dsa_user_ports(ds)));
+ if (ret)
+ return ret;
+
+ /* BPDU to CPU port */
+ ret = regmap_update_bits(priv->regmap, AN8855_BPC, AN8855_BPDU_PORT_FW,
+ FIELD_PREP(AN8855_BPDU_PORT_FW, AN8855_BPDU_CPU_ONLY));
+ if (ret)
+ return ret;
+
+ ret = regmap_clear_bits(priv->regmap, AN8855_CKGCR,
+ AN8855_CKG_LNKDN_GLB_STOP | AN8855_CKG_LNKDN_PORT_STOP);
+ if (ret)
+ return ret;
+
+ /* Release global PHY power down */
+ ret = regmap_write(priv->regmap, AN8855_RG_GPHY_AFE_PWD, 0x0);
+ if (ret)
+ return ret;
+
+ ds->configure_vlan_while_not_filtering = true;
+
+ /* Flush the FDB table */
+ ret = an8855_fdb_cmd(priv, AN8855_FDB_FLUSH, NULL);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct phylink_pcs *
+an8855_phylink_mac_select_pcs(struct phylink_config *config,
+ phy_interface_t interface)
+{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct an8855_priv *priv = dp->ds->priv;
+
+ switch (interface) {
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_2500BASEX:
+ return &priv->pcs;
+ default:
+ return NULL;
+ }
+}
+
+static void
+an8855_phylink_mac_config(struct phylink_config *config, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct dsa_switch *ds = dp->ds;
+ struct an8855_priv *priv;
+ int port = dp->index;
+
+ priv = ds->priv;
+
+ switch (port) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ return;
+ case 5:
+ break;
+ default:
+ dev_err(ds->dev, "unsupported port: %d", port);
+ return;
+ }
+
+ if (state->interface == PHY_INTERFACE_MODE_2500BASEX &&
+ phylink_autoneg_inband(mode))
+ dev_err(ds->dev, "in-band negotiation unsupported");
+
+ regmap_update_bits(priv->regmap, AN8855_PMCR_P(port),
+ AN8855_PMCR_IFG_XMIT | AN8855_PMCR_MAC_MODE |
+ AN8855_PMCR_BACKOFF_EN | AN8855_PMCR_BACKPR_EN,
+ FIELD_PREP(AN8855_PMCR_IFG_XMIT, 0x1) |
+ AN8855_PMCR_MAC_MODE | AN8855_PMCR_BACKOFF_EN |
+ AN8855_PMCR_BACKPR_EN);
+}
+
+static void an8855_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+{
+ switch (port) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ __set_bit(PHY_INTERFACE_MODE_GMII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ break;
+ case 5:
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX,
+ config->supported_interfaces);
+ break;
+ }
+
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000FD;
+}
+
+static void
+an8855_phylink_mac_link_down(struct phylink_config *config, unsigned int mode,
+ phy_interface_t interface)
+{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct an8855_priv *priv = dp->ds->priv;
+
+ /* Disable TX/RX, force link down */
+ regmap_update_bits(priv->regmap, AN8855_PMCR_P(dp->index),
+ AN8855_PMCR_TX_EN | AN8855_PMCR_RX_EN |
+ AN8855_PMCR_FORCE_MODE | AN8855_PMCR_FORCE_LNK,
+ AN8855_PMCR_FORCE_MODE);
+}
+
+static void
+an8855_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev, unsigned int mode,
+ phy_interface_t interface, int speed, int duplex,
+ bool tx_pause, bool rx_pause)
+{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct an8855_priv *priv = dp->ds->priv;
+ int port = dp->index;
+ u32 reg;
+
+ reg = regmap_read(priv->regmap, AN8855_PMCR_P(port), ®);
+ if (phylink_autoneg_inband(mode)) {
+ reg &= ~AN8855_PMCR_FORCE_MODE;
+ } else {
+ reg |= AN8855_PMCR_FORCE_MODE | AN8855_PMCR_FORCE_LNK;
+
+ reg &= ~AN8855_PMCR_FORCE_SPEED;
+ switch (speed) {
+ case SPEED_10:
+ reg |= AN8855_PMCR_FORCE_SPEED_10;
+ break;
+ case SPEED_100:
+ reg |= AN8855_PMCR_FORCE_SPEED_100;
+ break;
+ case SPEED_1000:
+ reg |= AN8855_PMCR_FORCE_SPEED_1000;
+ break;
+ case SPEED_2500:
+ reg |= AN8855_PMCR_FORCE_SPEED_2500;
+ break;
+ case SPEED_5000:
+ reg |= AN8855_PMCR_FORCE_SPEED_5000;
+ break;
+ }
+
+ reg &= AN8855_PMCR_FORCE_FDX;
+ if (duplex == DUPLEX_FULL)
+ reg |= AN8855_PMCR_FORCE_FDX;
+
+ reg &= AN8855_PMCR_RX_FC_EN;
+ if (rx_pause || dsa_port_is_cpu(dp))
+ reg |= AN8855_PMCR_RX_FC_EN;
+
+ reg &= AN8855_PMCR_TX_FC_EN;
+ if (rx_pause || dsa_port_is_cpu(dp))
+ reg |= AN8855_PMCR_TX_FC_EN;
+
+ /* Disable any EEE options */
+ reg &= ~(AN8855_PMCR_FORCE_EEE5G | AN8855_PMCR_FORCE_EEE2P5G |
+ AN8855_PMCR_FORCE_EEE1G | AN8855_PMCR_FORCE_EEE100);
+ }
+
+ reg |= AN8855_PMCR_TX_EN | AN8855_PMCR_RX_EN;
+
+ regmap_write(priv->regmap, AN8855_PMCR_P(port), reg);
+}
+
+static void an8855_pcs_get_state(struct phylink_pcs *pcs,
+ struct phylink_link_state *state)
+{
+ struct an8855_priv *priv = container_of(pcs, struct an8855_priv, pcs);
+ u32 val;
+ int ret;
+
+ ret = regmap_read(priv->regmap, AN8855_PMSR_P(AN8855_CPU_PORT), &val);
+ if (ret < 0) {
+ state->link = false;
+ return;
+ }
+
+ state->link = !!(val & AN8855_PMSR_LNK);
+ state->an_complete = state->link;
+ state->duplex = (val & AN8855_PMSR_DPX) ? DUPLEX_FULL :
+ DUPLEX_HALF;
+
+ switch (val & AN8855_PMSR_SPEED) {
+ case AN8855_PMSR_SPEED_10:
+ state->speed = SPEED_10;
+ break;
+ case AN8855_PMSR_SPEED_100:
+ state->speed = SPEED_100;
+ break;
+ case AN8855_PMSR_SPEED_1000:
+ state->speed = SPEED_1000;
+ break;
+ case AN8855_PMSR_SPEED_2500:
+ state->speed = SPEED_2500;
+ break;
+ case AN8855_PMSR_SPEED_5000:
+ state->speed = SPEED_5000;
+ break;
+ default:
+ state->speed = SPEED_UNKNOWN;
+ break;
+ }
+
+ if (val & AN8855_PMSR_RX_FC)
+ state->pause |= MLO_PAUSE_RX;
+ if (val & AN8855_PMSR_TX_FC)
+ state->pause |= MLO_PAUSE_TX;
+}
+
+static int an8855_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
+ phy_interface_t interface,
+ const unsigned long *advertising,
+ bool permit_pause_to_mac)
+{
+ struct an8855_priv *priv = container_of(pcs, struct an8855_priv, pcs);
+ u32 val;
+ int ret;
+
+ switch (interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ return 0;
+ case PHY_INTERFACE_MODE_SGMII:
+ break;
+ case PHY_INTERFACE_MODE_2500BASEX:
+ if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
+ return -EINVAL;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* !!! WELCOME TO HELL !!! */
+
+ /* TX FIR - improve TX EYE */
+ ret = regmap_update_bits(priv->regmap, AN8855_INTF_CTRL_10, GENMASK(21, 16),
+ FIELD_PREP(GENMASK(21, 16), 0x20));
+ if (ret)
+ return ret;
+ ret = regmap_update_bits(priv->regmap, AN8855_INTF_CTRL_10, GENMASK(28, 24),
+ FIELD_PREP(GENMASK(28, 24), 0x4));
+ if (ret)
+ return ret;
+ ret = regmap_set_bits(priv->regmap, AN8855_INTF_CTRL_10, BIT(29));
+ if (ret)
+ return ret;
+
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ val = 0x0;
+ else
+ val = 0xd;
+ ret = regmap_update_bits(priv->regmap, AN8855_INTF_CTRL_11, GENMASK(5, 0),
+ FIELD_PREP(GENMASK(5, 0), val));
+ if (ret)
+ return ret;
+ ret = regmap_set_bits(priv->regmap, AN8855_INTF_CTRL_11, BIT(6));
+ if (ret)
+ return ret;
+
+ /* RX CDR - improve RX Jitter Tolerance */
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ val = 0x5;
+ else
+ val = 0x6;
+ ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_BOT_LIM, GENMASK(26, 24),
+ FIELD_PREP(GENMASK(26, 24), val));
+ if (ret)
+ return ret;
+ ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_BOT_LIM, GENMASK(22, 20),
+ FIELD_PREP(GENMASK(22, 20), val));
+ if (ret)
+ return ret;
+
+ /* PLL */
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ val = 0x1;
+ else
+ val = 0x0;
+ ret = regmap_update_bits(priv->regmap, AN8855_QP_DIG_MODE_CTRL_1, GENMASK(3, 2),
+ FIELD_PREP(GENMASK(3, 2), val));
+ if (ret)
+ return ret;
+
+ /* PLL - LPF */
+ ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(1, 0),
+ FIELD_PREP(GENMASK(1, 0), 0x1));
+ if (ret)
+ return ret;
+ ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(4, 2),
+ FIELD_PREP(GENMASK(4, 2), 0x5));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(6) | BIT(7));
+ if (ret)
+ return ret;
+ ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(10, 8),
+ FIELD_PREP(GENMASK(10, 8), 0x3));
+ if (ret)
+ return ret;
+ ret = regmap_set_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(29));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(12) | BIT(13));
+ if (ret)
+ return ret;
+
+ /* PLL - ICO */
+ ret = regmap_set_bits(priv->regmap, AN8855_PLL_CTRL_4, BIT(2));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(14));
+ if (ret)
+ return ret;
+
+ /* PLL - CHP */
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ val = 0x6;
+ else
+ val = 0x4;
+ ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(19, 16),
+ FIELD_PREP(GENMASK(19, 16), val));
+ if (ret)
+ return ret;
+
+ /* PLL - PFD */
+ ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(21, 20),
+ FIELD_PREP(GENMASK(21, 20), 0x1));
+ if (ret)
+ return ret;
+ ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(25, 24),
+ FIELD_PREP(GENMASK(25, 24), 0x1));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(26));
+ if (ret)
+ return ret;
+
+ /* PLL - POSTDIV */
+ ret = regmap_set_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(22));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(27));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(28));
+ if (ret)
+ return ret;
+
+ /* PLL - SDM */
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_4, BIT(3) | BIT(4));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(30));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_SS_LCPLL_PWCTL_SETTING_2,
+ GENMASK(17, 16),
+ FIELD_PREP(GENMASK(17, 16), 0x1));
+ if (ret)
+ return ret;
+
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ val = 0x7a000000;
+ else
+ val = 0x48000000;
+ ret = regmap_write(priv->regmap, AN8855_SS_LCPLL_TDC_FLT_2, val);
+ if (ret)
+ return ret;
+ ret = regmap_write(priv->regmap, AN8855_SS_LCPLL_TDC_PCW_1, val);
+ if (ret)
+ return ret;
+
+ ret = regmap_clear_bits(priv->regmap, AN8855_SS_LCPLL_TDC_FLT_5, BIT(24));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CK_CTRL_0, BIT(8));
+ if (ret)
+ return ret;
+
+ /* PLL - SS */
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_3, GENMASK(15, 0));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_4, GENMASK(1, 0));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_3, GENMASK(31, 16));
+ if (ret)
+ return ret;
+
+ /* PLL - TDC */
+ ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CK_CTRL_0, BIT(9));
+ if (ret)
+ return ret;
+
+ ret = regmap_set_bits(priv->regmap, AN8855_RG_QP_PLL_SDM_ORD, BIT(3));
+ if (ret)
+ return ret;
+ ret = regmap_set_bits(priv->regmap, AN8855_RG_QP_PLL_SDM_ORD, BIT(4));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_RX_DAC_EN, GENMASK(17, 16),
+ FIELD_PREP(GENMASK(17, 16), 0x2));
+ if (ret)
+ return ret;
+
+ /* TCL Disable (only for Co-SIM) */
+ ret = regmap_clear_bits(priv->regmap, AN8855_PON_RXFEDIG_CTRL_0, BIT(12));
+ if (ret)
+ return ret;
+
+ /* TX Init */
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ val = 0x4;
+ else
+ val = 0x0;
+ ret = regmap_clear_bits(priv->regmap, AN8855_RG_QP_TX_MODE_16B_EN, BIT(0));
+ if (ret)
+ return ret;
+ ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_TX_MODE_16B_EN,
+ GENMASK(31, 16),
+ FIELD_PREP(GENMASK(31, 16), val));
+ if (ret)
+ return ret;
+
+ /* RX Control/Init */
+ ret = regmap_set_bits(priv->regmap, AN8855_RG_QP_RXAFE_RESERVE, BIT(11));
+ if (ret)
+ return ret;
+
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ val = 0x1;
+ else
+ val = 0x2;
+ ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_MJV_LIM,
+ GENMASK(5, 4),
+ FIELD_PREP(GENMASK(5, 4), val));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_SETVALUE,
+ GENMASK(28, 25),
+ FIELD_PREP(GENMASK(28, 25), 0x1));
+ if (ret)
+ return ret;
+ ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_SETVALUE,
+ GENMASK(31, 29),
+ FIELD_PREP(GENMASK(31, 29), 0x6));
+ if (ret)
+ return ret;
+
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ val = 0xf;
+ else
+ val = 0xc;
+ ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_PR_CKREF_DIV1,
+ GENMASK(12, 8),
+ FIELD_PREP(GENMASK(12, 8), val));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_PR_KBAND_DIV_PCIE,
+ GENMASK(12, 8),
+ FIELD_PREP(GENMASK(12, 8), 0x19));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_RG_QP_CDR_PR_KBAND_DIV_PCIE, BIT(6));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_FORCE_IBANDLPF_R_OFF,
+ GENMASK(12, 6),
+ FIELD_PREP(GENMASK(12, 6), 0x21));
+ if (ret)
+ return ret;
+ ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_FORCE_IBANDLPF_R_OFF,
+ GENMASK(17, 16),
+ FIELD_PREP(GENMASK(17, 16), 0x2));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_RG_QP_CDR_FORCE_IBANDLPF_R_OFF, BIT(13));
+ if (ret)
+ return ret;
+
+ ret = regmap_clear_bits(priv->regmap, AN8855_RG_QP_CDR_PR_KBAND_DIV_PCIE, BIT(30));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_PR_CKREF_DIV1,
+ GENMASK(26, 24),
+ FIELD_PREP(GENMASK(26, 24), 0x4));
+ if (ret)
+ return ret;
+
+ ret = regmap_set_bits(priv->regmap, AN8855_RX_CTRL_26, BIT(23));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_RX_CTRL_26, BIT(24));
+ if (ret)
+ return ret;
+ ret = regmap_set_bits(priv->regmap, AN8855_RX_CTRL_26, BIT(26));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_RX_DLY_0, GENMASK(7, 0),
+ FIELD_PREP(GENMASK(7, 0), 0x6f));
+ if (ret)
+ return ret;
+ ret = regmap_set_bits(priv->regmap, AN8855_RX_DLY_0, GENMASK(13, 8));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_42, GENMASK(12, 0),
+ FIELD_PREP(GENMASK(12, 0), 0x150));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_2, GENMASK(28, 16),
+ FIELD_PREP(GENMASK(28, 16), 0x150));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_PON_RXFEDIG_CTRL_9,
+ GENMASK(2, 0),
+ FIELD_PREP(GENMASK(2, 0), 0x1));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_8, GENMASK(27, 16),
+ FIELD_PREP(GENMASK(27, 16), 0x200));
+ if (ret)
+ return ret;
+ ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_8, GENMASK(14, 0),
+ FIELD_PREP(GENMASK(14, 0), 0xfff));
+ if (ret)
+ return ret;
+
+ /* Frequency meter */
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ val = 0x10;
+ else
+ val = 0x28;
+ ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_5, GENMASK(29, 10),
+ FIELD_PREP(GENMASK(29, 10), val));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_6, GENMASK(19, 0),
+ FIELD_PREP(GENMASK(19, 0), 0x64));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_7, GENMASK(19, 0),
+ FIELD_PREP(GENMASK(19, 0), 0x2710));
+ if (ret)
+ return ret;
+
+ ret = regmap_set_bits(priv->regmap, AN8855_PLL_CTRL_0, BIT(0));
+ if (ret)
+ return ret;
+
+ /* PCS Init */
+ if (interface == PHY_INTERFACE_MODE_SGMII &&
+ neg_mode == PHYLINK_PCS_NEG_INBAND_DISABLED) {
+ ret = regmap_clear_bits(priv->regmap, AN8855_QP_DIG_MODE_CTRL_0,
+ BIT(0));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_QP_DIG_MODE_CTRL_0,
+ GENMASK(5, 4));
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_clear_bits(priv->regmap, AN8855_RG_HSGMII_PCS_CTROL_1, BIT(30));
+ if (ret)
+ return ret;
+
+ if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
+ /* Set AN Ability - Interrupt */
+ ret = regmap_set_bits(priv->regmap, AN8855_SGMII_REG_AN_FORCE_CL37, BIT(0));
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, AN8855_SGMII_REG_AN_13,
+ GENMASK(5, 0),
+ FIELD_PREP(GENMASK(5, 0), 0xb));
+ if (ret)
+ return ret;
+ ret = regmap_set_bits(priv->regmap, AN8855_SGMII_REG_AN_13, BIT(8));
+ if (ret)
+ return ret;
+ }
+
+ /* Rate Adaption - GMII path config. */
+ if (interface == PHY_INTERFACE_MODE_2500BASEX) {
+ ret = regmap_clear_bits(priv->regmap, AN8855_RATE_ADP_P0_CTRL_0, BIT(31));
+ if (ret)
+ return ret;
+ } else {
+ if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
+ ret = regmap_set_bits(priv->regmap, AN8855_MII_RA_AN_ENABLE, BIT(0));
+ if (ret)
+ return ret;
+ } else {
+ ret = regmap_set_bits(priv->regmap, AN8855_RG_AN_SGMII_MODE_FORCE,
+ BIT(0));
+ if (ret)
+ return ret;
+ ret = regmap_clear_bits(priv->regmap, AN8855_RG_AN_SGMII_MODE_FORCE,
+ GENMASK(5, 4));
+ if (ret)
+ return ret;
+
+ ret = regmap_clear_bits(priv->regmap, AN8855_RATE_ADP_P0_CTRL_0,
+ GENMASK(3, 0));
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_set_bits(priv->regmap, AN8855_RATE_ADP_P0_CTRL_0, BIT(28));
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_set_bits(priv->regmap, AN8855_RG_RATE_ADAPT_CTRL_0, BIT(0));
+ if (ret)
+ return ret;
+ ret = regmap_set_bits(priv->regmap, AN8855_RG_RATE_ADAPT_CTRL_0, BIT(4));
+ if (ret)
+ return ret;
+ ret = regmap_set_bits(priv->regmap, AN8855_RG_RATE_ADAPT_CTRL_0, GENMASK(27, 26));
+ if (ret)
+ return ret;
+
+ /* Disable AN */
+ if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
+ ret = regmap_set_bits(priv->regmap, AN8855_SGMII_REG_AN0,
+ AN8855_SGMII_AN_ENABLE);
+ if (ret)
+ return ret;
+ } else {
+ ret = regmap_clear_bits(priv->regmap, AN8855_SGMII_REG_AN0,
+ AN8855_SGMII_AN_ENABLE);
+ if (ret)
+ return ret;
+ }
+
+ if (interface == PHY_INTERFACE_MODE_SGMII &&
+ neg_mode == PHYLINK_PCS_NEG_INBAND_DISABLED) {
+ ret = regmap_set_bits(priv->regmap, AN8855_PHY_RX_FORCE_CTRL_0, BIT(4));
+ if (ret)
+ return ret;
+ }
+
+ /* Force Speed */
+ if (interface == PHY_INTERFACE_MODE_2500BASEX ||
+ neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ val = 0x3;
+ else
+ val = 0x2;
+ ret = regmap_set_bits(priv->regmap, AN8855_SGMII_STS_CTRL_0, BIT(2));
+ if (ret)
+ return ret;
+ ret = regmap_update_bits(priv->regmap, AN8855_SGMII_STS_CTRL_0,
+ GENMASK(5, 4),
+ FIELD_PREP(GENMASK(5, 4), val));
+ if (ret)
+ return ret;
+ }
+
+ /* bypass flow control to MAC */
+ ret = regmap_write(priv->regmap, AN8855_MSG_RX_LIK_STS_0, 0x01010107);
+ if (ret)
+ return ret;
+ ret = regmap_write(priv->regmap, AN8855_MSG_RX_LIK_STS_2, 0x00000EEF);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void an8855_pcs_an_restart(struct phylink_pcs *pcs)
+{
+ struct an8855_priv *priv = container_of(pcs, struct an8855_priv, pcs);
+
+ regmap_set_bits(priv->regmap, AN8855_SGMII_REG_AN0,
+ AN8855_SGMII_AN_RESTART);
+}
+
+static const struct phylink_pcs_ops an8855_pcs_ops = {
+ .pcs_get_state = an8855_pcs_get_state,
+ .pcs_config = an8855_pcs_config,
+ .pcs_an_restart = an8855_pcs_an_restart,
+};
+
+static const struct phylink_mac_ops an8855_phylink_mac_ops = {
+ .mac_select_pcs = an8855_phylink_mac_select_pcs,
+ .mac_config = an8855_phylink_mac_config,
+ .mac_link_down = an8855_phylink_mac_link_down,
+ .mac_link_up = an8855_phylink_mac_link_up,
+};
+
+static const struct dsa_switch_ops an8855_switch_ops = {
+ .get_tag_protocol = an8855_get_tag_protocol,
+ .setup = an8855_setup,
+ .get_strings = an8855_get_strings,
+ .get_ethtool_stats = an8855_get_ethtool_stats,
+ .get_sset_count = an8855_get_sset_count,
+ .port_enable = an8855_port_enable,
+ .port_disable = an8855_port_disable,
+ .port_stp_state_set = an8855_stp_state_set,
+ .port_bridge_join = an8855_port_bridge_join,
+ .port_bridge_leave = an8855_port_bridge_leave,
+ .port_fdb_add = an8855_port_fdb_add,
+ .port_fdb_del = an8855_port_fdb_del,
+ .port_fdb_dump = an8855_port_fdb_dump,
+ .port_vlan_filtering = an8855_port_vlan_filtering,
+ .port_vlan_add = an8855_port_vlan_add,
+ .port_vlan_del = an8855_port_vlan_del,
+ .port_mirror_add = an8855_port_mirror_add,
+ .port_mirror_del = an8855_port_mirror_del,
+ .phylink_get_caps = an8855_phylink_get_caps,
+ .get_phy_flags = en8855_get_phy_flags,
+ .get_mac_eee = an8855_get_mac_eee,
+ .set_mac_eee = an8855_set_mac_eee,
+};
+
+static int an8855_read_switch_id(struct an8855_priv *priv)
+{
+ u32 id;
+ int ret;
+
+ ret = regmap_read(priv->regmap, AN8855_CREV, &id);
+ if (ret)
+ return ret;
+
+ if (id != AN8855_ID) {
+ dev_err(priv->dev,
+ "Switch id detected %x but expected %x",
+ id, AN8855_ID);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int
+an8855_sw_probe(struct mdio_device *mdiodev)
+{
+ struct an8855_priv *priv;
+ u32 val;
+ int ret;
+
+ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->bus = mdiodev->bus;
+ priv->dev = &mdiodev->dev;
+ priv->phy_base = AN8855_GPHY_SMI_ADDR_DEFAULT;
+ priv->phy_require_calib = of_property_read_bool(priv->dev->of_node,
+ "airoha,ext_surge");
+
+ priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(priv->reset_gpio))
+ return PTR_ERR(priv->reset_gpio);
+
+ priv->regmap = devm_regmap_init(&mdiodev->dev, NULL, priv,
+ &an8855_regmap_config);
+ if (IS_ERR(priv->regmap)) {
+ dev_err(priv->dev, "regmap initialization failed");
+ return PTR_ERR(priv->regmap);
+ }
+
+ if (priv->reset_gpio) {
+ usleep_range(100000, 150000);
+ gpiod_set_value_cansleep(priv->reset_gpio, 0);
+ usleep_range(100000, 150000);
+ gpiod_set_value_cansleep(priv->reset_gpio, 1);
+
+ /* Poll HWTRAP reg to wait for Switch to fully Init */
+ ret = regmap_read_poll_timeout(priv->regmap, AN8855_HWTRAP, val,
+ val, 20, 200000);
+ if (ret)
+ return ret;
+ }
+
+ ret = an8855_read_switch_id(priv);
+ if (ret)
+ return ret;
+
+ /* Change base switch PHY address to new address on the BUS */
+ if (!of_property_read_u32(priv->dev->of_node,
+ "airoha,base_smi_address", &val) &&
+ val < PHY_MAX_ADDR) {
+ ret = regmap_write(priv->regmap, AN8855_RG_GPHY_SMI_ADDR, val);
+ if (ret)
+ return ret;
+ priv->phy_base = val;
+ }
+
+ priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
+ if (!priv->ds)
+ return -ENOMEM;
+
+ priv->ds->dev = &mdiodev->dev;
+ priv->ds->num_ports = AN8855_NUM_PORTS;
+ priv->ds->priv = priv;
+ priv->ds->ops = &an8855_switch_ops;
+ mutex_init(&priv->reg_mutex);
+ priv->ds->phylink_mac_ops = &an8855_phylink_mac_ops;
+
+ priv->pcs.ops = &an8855_pcs_ops;
+ priv->pcs.neg_mode = true;
+ priv->pcs.poll = true;
+
+ dev_set_drvdata(&mdiodev->dev, priv);
+
+ return dsa_register_switch(priv->ds);
+}
+
+static void
+an8855_sw_remove(struct mdio_device *mdiodev)
+{
+ struct an8855_priv *priv = dev_get_drvdata(&mdiodev->dev);
+
+ dsa_unregister_switch(priv->ds);
+ mutex_destroy(&priv->reg_mutex);
+}
+
+static const struct of_device_id an8855_of_match[] = {
+ { .compatible = "airoha,an8855" },
+ { /* sentinel */ },
+};
+
+static struct mdio_driver an8855_mdio_driver = {
+ .probe = an8855_sw_probe,
+ .remove = an8855_sw_remove,
+ .mdiodrv.driver = {
+ .name = "an8855",
+ .of_match_table = an8855_of_match,
+ },
+};
+
+mdio_module_driver(an8855_mdio_driver);
+
+MODULE_AUTHOR("Min Yao <min.yao@airoha.com>");
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_DESCRIPTION("Driver for Airoha AN8855 Switch");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/an8855.h b/drivers/net/dsa/an8855.h
new file mode 100644
index 000000000000..832e53114082
--- /dev/null
+++ b/drivers/net/dsa/an8855.h
@@ -0,0 +1,492 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 Min Yao <min.yao@airoha.com>
+ * Copyright (C) 2024 Christian Marangi <ansuelsmth@gmail.com>
+ */
+
+#ifndef __AN8855_H
+#define __AN8855_H
+
+#include <linux/bitfield.h>
+
+#define AN8855_NUM_PORTS 6
+#define AN8855_CPU_PORT 5
+#define AN8855_NUM_FDB_RECORDS 2048
+#define AN8855_GPHY_SMI_ADDR_DEFAULT 1
+#define AN8855_PORT_VID_DEFAULT 1
+
+/* AN8855_SCU 0x10000000 */
+#define AN8855_RG_GPIO_LED_MODE 0x10000054
+#define AN8855_RG_GPIO_LED_SEL(i) (0x10000000 + (0x0058 + ((i) * 4)))
+#define AN8855_RG_INTB_MODE 0x10000080
+#define AN8855_RG_RGMII_TXCK_C 0x100001d0
+
+#define AN8855_PKG_SEL 0x10000094
+#define AN8855_PAG_SEL_AN8855H 0x2
+
+/* Register for hw trap status */
+#define AN8855_HWTRAP 0x1000009c
+
+#define AN8855_RG_GPIO_L_INV 0x10000010
+#define AN8855_RG_GPIO_CTRL 0x1000a300
+#define AN8855_RG_GPIO_DATA 0x1000a304
+#define AN8855_RG_GPIO_OE 0x1000a314
+
+#define AN8855_EFUSE_DATA0 0x1000a500
+#define AN8855_EFUSE_R50O GENMASK(30, 24)
+
+#define AN8855_CREV 0x10005000
+#define AN8855_ID 0x8855
+
+/* Register for system reset */
+#define AN8855_RST_CTRL 0x100050c0
+#define AN8855_SYS_CTRL_SYS_RST BIT(31)
+
+#define AN8855_INT_MASK 0x100050f0
+#define AN8855_INT_SYS BIT(15)
+
+#define AN8855_RG_CLK_CPU_ICG 0x10005034
+#define AN8855_MCU_ENABLE BIT(3)
+
+#define AN8855_RG_TIMER_CTL 0x1000a100
+#define AN8855_WDOG_ENABLE BIT(25)
+
+#define AN8855_RG_GDMP_RAM 0x10010000
+
+/* Registers to mac forward control for unknown frames */
+#define AN8855_MFC 0x10200010
+#define AN8855_CPU_EN BIT(15)
+#define AN8855_CPU_PORT_IDX GENMASK(12, 8)
+
+#define AN8855_UNUF 0x102000b4
+#define AN8855_UNMF 0x102000b8
+#define AN8855_BCF 0x102000bc
+
+/* Registers for mirror port control */
+#define AN8855_MIR 0x102000cc
+#define AN8855_MIRROR_EN BIT(7)
+#define AN8855_MIRROR_PORT GENMASK(4, 0)
+
+/* Registers for BPDU and PAE frame control*/
+#define AN8855_BPC 0x102000D0
+#define AN8855_BPDU_PORT_FW GENMASK(2, 0)
+
+enum an8855_bpdu_port_fw {
+ AN8855_BPDU_FOLLOW_MFC = 0,
+ AN8855_BPDU_CPU_EXCLUDE = 4,
+ AN8855_BPDU_CPU_INCLUDE = 5,
+ AN8855_BPDU_CPU_ONLY = 6,
+ AN8855_BPDU_DROP = 7,
+};
+
+/* Register for address table control */
+#define AN8855_ATC 0x10200300
+#define AN8855_ATC_BUSY BIT(31)
+#define AN8855_ATC_HASH GENMASK(24, 16)
+#define AN8855_ATC_HIT GENMASK(15, 12)
+#define AN8855_ATC_MAT_MASK GENMASK(11, 7)
+#define AN8855_ATC_MAT(x) FIELD_PREP(AN8855_ATC_MAT_MASK, x)
+#define AN8855_ATC_SAT GENMASK(5, 4)
+#define AN8855_ATC_CMD GENMASK(2, 0)
+
+enum an8855_fdb_mat_cmds {
+ AND8855_FDB_MAT_ALL = 0,
+ AND8855_FDB_MAT_MAC, /* All MAC address */
+ AND8855_FDB_MAT_DYNAMIC_MAC, /* All Dynamic MAC address */
+ AND8855_FDB_MAT_STATIC_MAC, /* All Static Mac Address */
+ AND8855_FDB_MAT_DIP, /* All DIP/GA address */
+ AND8855_FDB_MAT_DIP_IPV4, /* All DIP/GA IPv4 address */
+ AND8855_FDB_MAT_DIP_IPV6, /* All DIP/GA IPv6 address */
+ AND8855_FDB_MAT_DIP_SIP, /* All DIP_SIP address */
+ AND8855_FDB_MAT_DIP_SIP_IPV4, /* All DIP_SIP IPv4 address */
+ AND8855_FDB_MAT_DIP_SIP_IPV6, /* All DIP_SIP IPv6 address */
+ AND8855_FDB_MAT_MAC_CVID, /* All MAC address with CVID */
+ AND8855_FDB_MAT_MAC_FID, /* All MAC address with Filter ID */
+ AND8855_FDB_MAT_MAC_PORT, /* All MAC address with port */
+ AND8855_FDB_MAT_DIP_SIP_DIP_IPV4, /* All DIP_SIP address with DIP_IPV4 */
+ AND8855_FDB_MAT_DIP_SIP_SIP_IPV4, /* All DIP_SIP address with SIP_IPV4 */
+ AND8855_FDB_MAT_DIP_SIP_DIP_IPV6, /* All DIP_SIP address with DIP_IPV6 */
+ AND8855_FDB_MAT_DIP_SIP_SIP_IPV6, /* All DIP_SIP address with SIP_IPV6 */
+ /* All MAC address with MAC type (dynamic or static) with CVID */
+ AND8855_FDB_MAT_MAC_TYPE_CVID,
+ /* All MAC address with MAC type (dynamic or static) with Filter ID */
+ AND8855_FDB_MAT_MAC_TYPE_FID,
+ /* All MAC address with MAC type (dynamic or static) with port */
+ AND8855_FDB_MAT_MAC_TYPE_PORT,
+};
+
+enum an8855_fdb_cmds {
+ AN8855_FDB_READ = 0,
+ AN8855_FDB_WRITE = 1,
+ AN8855_FDB_FLUSH = 2,
+ AN8855_FDB_START = 4,
+ AN8855_FDB_NEXT = 5,
+};
+
+/* Registers for address table access */
+#define AN8855_ATA1 0x10200304
+#define AN8855_ATA1_MAC0 GENMASK(31, 24)
+#define AN8855_ATA1_MAC1 GENMASK(23, 16)
+#define AN8855_ATA1_MAC2 GENMASK(15, 8)
+#define AN8855_ATA1_MAC3 GENMASK(7, 0)
+#define AN8855_ATA2 0x10200308
+#define AN8855_ATA2_MAC4 GENMASK(31, 24)
+#define AN8855_ATA2_MAC5 GENMASK(23, 16)
+
+/* Register for address table write data */
+#define AN8855_ATWD 0x10200324
+#define AN8855_ATWD_VLD BIT(0) /* vid LOAD */
+#define AN8855_ATWD_LEAKY BIT(1)
+#define AN8855_ATWD_UPRI GENMASK(4, 2)
+#define AN8855_ATWD_SA_FWD GENMASK(7, 5)
+#define AN8855_ATWD_SA_MIR GENMASK(9, 8)
+#define AN8855_ATWD_EG_TAG GENMASK(14, 12)
+#define AN8855_ATWD_IVL BIT(15)
+#define AN8855_ATWD_VID GENMASK(27, 16)
+#define AN8855_ATWD_FID GENMASK(31, 28)
+#define AN8855_ATWD2 0x10200328
+#define AN8855_ATWD2_PORT GENMASK(7, 0)
+
+/* Registers for table search read address */
+#define AN8855_ATRDS 0x10200330
+#define AN8855_ATRD_SEL GENMASK(1, 0)
+#define AN8855_ATRD0 0x10200334
+#define AN8855_ATRD0_LIVE BIT(0)
+#define AN8855_ATRD0_ARP GENMASK(2, 1)
+#define AN8855_ATRD0_TYPE GENMASK(4, 3)
+#define AN8855_ATRD0_IVL BIT(9)
+#define AN8855_ATRD0_VID GENMASK(21, 16)
+#define AN8855_ATRD0_FID GENMASK(28, 25)
+#define AN8855_ATRD1 0x10200338
+#define AN8855_ATRD1_MAC4 GENMASK(31, 24)
+#define AN8855_ATRD1_MAC5 GENMASK(23, 16)
+#define AN8855_ATRD1_AGING GENMASK(11, 3)
+#define AN8855_ATRD2 0x1020033c
+#define AN8855_ATRD2_MAC0 GENMASK(31, 24)
+#define AN8855_ATRD2_MAC1 GENMASK(23, 16)
+#define AN8855_ATRD2_MAC2 GENMASK(15, 8)
+#define AN8855_ATRD2_MAC3 GENMASK(7, 0)
+#define AN8855_ATRD3 0x10200340
+#define AN8855_ATRD3_PORTMASK GENMASK(7, 0)
+
+enum an8855_fdb_type {
+ AN8855_MAC_TB_TY_MAC = 0,
+ AN8855_MAC_TB_TY_DIP = 1,
+ AN8855_MAC_TB_TY_DIP_SIP = 2,
+};
+
+/* Register for vlan table control */
+#define AN8855_VTCR 0x10200600
+#define AN8855_VTCR_BUSY BIT(31)
+#define AN8855_VTCR_FUNC GENMASK(15, 12)
+#define AN8855_VTCR_VID GENMASK(11, 0)
+
+enum an8855_vlan_cmd {
+ /* Read/Write the specified VID entry from VAWD register based
+ * on VID.
+ */
+ AN8855_VTCR_RD_VID = 0,
+ AN8855_VTCR_WR_VID = 1,
+};
+
+/* Register for setup vlan write data */
+#define AN8855_VAWD0 0x10200604
+/* VLAN Member Control */
+#define AN8855_VA0_PORT GENMASK(31, 26)
+/* Egress Tag Control */
+#define AN8855_VA0_ETAG GENMASK(23, 12)
+#define AN8855_VA0_ETAG_PORT_MASK(port) (GENMASK(13, 12) << ((port) * 2))
+#define AN8855_VA0_ETAG_PORT_VAL(port, val) ((val) << __bf_shf(AN8855_VA0_ETAG_PORT_MASK(port)))
+#define AN8855_VA0_VTAG_EN BIT(10) /* Per VLAN Egress Tag Control */
+#define AN8855_VA0_IVL_MAC BIT(5) /* Independent VLAN Learning */
+#define AN8855_VA0_VLAN_VALID BIT(0) /* VLAN Entry Valid */
+#define AN8855_VAWD1 0x10200608
+#define AN8855_VA1_PORT_STAG BIT(1)
+
+/* Same register map of VAWD0 */
+#define AN8855_VARD0 0x10200618
+
+enum an8855_vlan_egress_attr {
+ AN8855_VLAN_EGRESS_UNTAG = 0,
+ AN8855_VLAN_EGRESS_TAG = 2,
+ AN8855_VLAN_EGRESS_STACK = 3,
+};
+
+/* Register for port STP state control */
+#define AN8855_SSP_P(x) (0x10208000 + ((x) * 0x200))
+#define AN8855_FID_PST GENMASK(1, 0)
+
+enum an8855_stp_state {
+ AN8855_STP_DISABLED = 0,
+ AN8855_STP_BLOCKING = 1,
+ AN8855_STP_LISTENING = 1,
+ AN8855_STP_LEARNING = 2,
+ AN8855_STP_FORWARDING = 3
+};
+
+/* Register for port control */
+#define AN8855_PCR_P(x) (0x10208004 + ((x) * 0x200))
+#define AN8855_EG_TAG GENMASK(29, 28)
+#define AN8855_PORT_PRI GENMASK(26, 24)
+#define AN8855_PORT_TX_MIR BIT(20)
+#define AN8855_PORT_RX_MIR BIT(16)
+#define AN8855_PORT_VLAN GENMASK(1, 0)
+
+enum an8855_port_mode {
+ /* Port Matrix Mode: Frames are forwarded by the PCR_MATRIX members. */
+ AN8855_PORT_MATRIX_MODE = 0,
+
+ /* Fallback Mode: Forward received frames with ingress ports that do
+ * not belong to the VLAN member. Frames whose VID is not listed on
+ * the VLAN table are forwarded by the PCR_MATRIX members.
+ */
+ AN8855_PORT_FALLBACK_MODE = 1,
+
+ /* Check Mode: Forward received frames whose ingress do not
+ * belong to the VLAN member. Discard frames if VID ismiddes on the
+ * VLAN table.
+ */
+ AN8855_PORT_CHECK_MODE = 1,
+
+ /* Security Mode: Discard any frame due to ingress membership
+ * violation or VID missed on the VLAN table.
+ */
+ AN8855_PORT_SECURITY_MODE = 3,
+};
+
+/* Register for port security control */
+#define AN8855_PSC_P(x) (0x1020800c + ((x) * 0x200))
+#define AN8855_SA_DIS BIT(4)
+
+/* Register for port vlan control */
+#define AN8855_PVC_P(x) (0x10208010 + ((x) * 0x200))
+#define AN8855_PVC_EG_TAG GENMASK(10, 8)
+#define AN8855_PORT_SPEC_REPLACE_MODE BIT(11)
+#define AN8855_VLAN_ATTR GENMASK(7, 6)
+#define AN8855_PORT_SPEC_TAG BIT(5)
+
+enum an8855_vlan_port_eg_tag {
+ AN8855_VLAN_EG_DISABLED = 0,
+ AN8855_VLAN_EG_CONSISTENT = 1,
+ AN8855_VLAN_EG_UNTAGGED = 4,
+ AN8855_VLAN_EG_SWAP = 5,
+ AN8855_VLAN_EG_TAGGED = 6,
+ AN8855_VLAN_EG_STACK = 7,
+};
+
+enum an8855_vlan_port_attr {
+ AN8855_VLAN_USER = 0,
+ AN8855_VLAN_STACK = 1,
+ AN8855_VLAN_TRANSPARENT = 3,
+};
+
+#define AN8855_PORTMATRIX_P(x) (0x10208044 + ((x) * 0x200))
+#define AN8855_PORTMATRIX GENMASK(6, 0)
+
+/* Register for port PVID */
+#define AN8855_PVID_P(x) (0x10208048 + ((x) * 0x200))
+#define AN8855_G0_PORT_VID GENMASK(11, 0)
+
+/* Register for port MAC control register */
+#define AN8855_PMCR_P(x) (0x10210000 + ((x) * 0x200))
+#define AN8855_PMCR_FORCE_MODE BIT(31)
+#define AN8855_PMCR_FORCE_SPEED GENMASK(30, 28)
+#define AN8855_PMCR_FORCE_SPEED_5000 FIELD_PREP_CONST(AN8855_PMCR_FORCE_SPEED, 0x4)
+#define AN8855_PMCR_FORCE_SPEED_2500 FIELD_PREP_CONST(AN8855_PMCR_FORCE_SPEED, 0x3)
+#define AN8855_PMCR_FORCE_SPEED_1000 FIELD_PREP_CONST(AN8855_PMCR_FORCE_SPEED, 0x2)
+#define AN8855_PMCR_FORCE_SPEED_100 FIELD_PREP_CONST(AN8855_PMCR_FORCE_SPEED, 0x1)
+#define AN8855_PMCR_FORCE_SPEED_10 FIELD_PREP_CONST(AN8855_PMCR_FORCE_SPEED, 0x1)
+#define AN8855_PMCR_FORCE_FDX BIT(25)
+#define AN8855_PMCR_FORCE_LNK BIT(24)
+#define AN8855_PMCR_IFG_XMIT GENMASK(21, 20)
+#define AN8855_PMCR_EXT_PHY BIT(19)
+#define AN8855_PMCR_MAC_MODE BIT(18)
+#define AN8855_PMCR_TX_EN BIT(16)
+#define AN8855_PMCR_RX_EN BIT(15)
+#define AN8855_PMCR_BACKOFF_EN BIT(12)
+#define AN8855_PMCR_BACKPR_EN BIT(11)
+#define AN8855_PMCR_FORCE_EEE5G BIT(9)
+#define AN8855_PMCR_FORCE_EEE2P5G BIT(8)
+#define AN8855_PMCR_FORCE_EEE1G BIT(7)
+#define AN8855_PMCR_FORCE_EEE100 BIT(6)
+#define AN8855_PMCR_TX_FC_EN BIT(5)
+#define AN8855_PMCR_RX_FC_EN BIT(4)
+
+#define AN8855_PMSR_P(x) (0x10210010 + (x) * 0x200)
+#define AN8855_PMSR_SPEED GENMASK(30, 28)
+#define AN8855_PMSR_SPEED_5000 FIELD_PREP_CONST(AN8855_PMSR_SPEED, 0x4)
+#define AN8855_PMSR_SPEED_2500 FIELD_PREP_CONST(AN8855_PMSR_SPEED, 0x3)
+#define AN8855_PMSR_SPEED_1000 FIELD_PREP_CONST(AN8855_PMSR_SPEED, 0x2)
+#define AN8855_PMSR_SPEED_100 FIELD_PREP_CONST(AN8855_PMSR_SPEED, 0x1)
+#define AN8855_PMSR_SPEED_10 FIELD_PREP_CONST(AN8855_PMSR_SPEED, 0x0)
+#define AN8855_PMSR_DPX BIT(25)
+#define AN8855_PMSR_LNK BIT(24)
+#define AN8855_PMSR_EEE1G BIT(7)
+#define AN8855_PMSR_EEE100M BIT(6)
+#define AN8855_PMSR_RX_FC BIT(5)
+#define AN8855_PMSR_TX_FC BIT(4)
+
+#define AN8855_PMEEECR_P(x) (0x10210004 + (x) * 0x200)
+#define AN8855_LPI_MODE_EN BIT(31)
+#define AN8855_WAKEUP_TIME_2500 GENMASK(23, 16)
+#define AN8855_WAKEUP_TIME_1000 GENMASK(15, 8)
+#define AN8855_WAKEUP_TIME_100 GENMASK(7, 0)
+#define AN8855_PMEEECR2_P(x) (0x10210008 + (x) * 0x200)
+#define AN8855_WAKEUP_TIME_5000 GENMASK(7, 0)
+
+#define AN8855_CKGCR (0x10213e1c)
+#define AN8855_LPI_TXIDLE_THD_MASK GENMASK(31, 14)
+#define AN8855_CKG_LNKDN_PORT_STOP BIT(1)
+#define AN8855_CKG_LNKDN_GLB_STOP BIT(0)
+
+/* Register for MIB */
+#define AN8855_PORT_MIB_COUNTER(x) (0x10214000 + (x) * 0x200)
+#define AN8855_MIB_CCR 0x10213e30
+#define AN8855_CCR_MIB_ENABLE BIT(31)
+#define AN8855_CCR_RX_OCT_CNT_GOOD BIT(7)
+#define AN8855_CCR_RX_OCT_CNT_BAD BIT(6)
+#define AN8855_CCR_TX_OCT_CNT_GOOD BIT(5)
+#define AN8855_CCR_TX_OCT_CNT_BAD BIT(4)
+#define AN8855_CCR_RX_OCT_CNT_GOOD_2 BIT(3)
+#define AN8855_CCR_RX_OCT_CNT_BAD_2 BIT(2)
+#define AN8855_CCR_TX_OCT_CNT_GOOD_2 BIT(1)
+#define AN8855_CCR_TX_OCT_CNT_BAD_2 BIT(0)
+#define AN8855_CCR_MIB_ACTIVATE (AN8855_CCR_MIB_ENABLE | \
+ AN8855_CCR_RX_OCT_CNT_GOOD | \
+ AN8855_CCR_RX_OCT_CNT_BAD | \
+ AN8855_CCR_TX_OCT_CNT_GOOD | \
+ AN8855_CCR_TX_OCT_CNT_BAD | \
+ AN8855_CCR_RX_OCT_CNT_BAD_2 | \
+ AN8855_CCR_TX_OCT_CNT_BAD_2)
+#define AN8855_MIB_CLR 0x10213e34
+#define AN8855_MIB_PORT6_CLR BIT(6)
+#define AN8855_MIB_PORT5_CLR BIT(5)
+#define AN8855_MIB_PORT4_CLR BIT(4)
+#define AN8855_MIB_PORT3_CLR BIT(3)
+#define AN8855_MIB_PORT2_CLR BIT(2)
+#define AN8855_MIB_PORT1_CLR BIT(1)
+#define AN8855_MIB_PORT0_CLR BIT(0)
+
+/* HSGMII/SGMII Configuration register */
+/* AN8855_HSGMII_AN_CSR_BASE 0x10220000 */
+#define AN8855_SGMII_REG_AN0 0x10220000
+#define AN8855_SGMII_AN_ENABLE BIT(12)
+#define AN8855_SGMII_AN_RESTART BIT(9)
+#define AN8855_SGMII_REG_AN_13 0x10220034
+#define AN8855_SGMII_REG_AN_FORCE_CL37 0x10220060
+
+/* AN8855_HSGMII_CSR_PCS_BASE 0x10220000 */
+#define AN8855_RG_HSGMII_PCS_CTROL_1 0x10220a00
+#define AN8855_RG_AN_SGMII_MODE_FORCE 0x10220a24
+
+/* AN8855_MULTI_SGMII_CSR_BASE 0x10224000 */
+#define AN8855_SGMII_STS_CTRL_0 0x10224018
+#define AN8855_MSG_RX_CTRL_0 0x10224100
+#define AN8855_MSG_RX_LIK_STS_0 0x10224514
+#define AN8855_MSG_RX_LIK_STS_2 0x1022451c
+#define AN8855_PHY_RX_FORCE_CTRL_0 0x10224520
+
+/* AN8855_XFI_CSR_PCS_BASE 0x10225000 */
+#define AN8855_RG_USXGMII_AN_CONTROL_0 0x10225bf8
+
+/* AN8855_MULTI_PHY_RA_CSR_BASE 0x10226000 */
+#define AN8855_RG_RATE_ADAPT_CTRL_0 0x10226000
+#define AN8855_RATE_ADP_P0_CTRL_0 0x10226100
+#define AN8855_MII_RA_AN_ENABLE 0x10226300
+
+/* AN8855_QP_DIG_CSR_BASE 0x1022a000 */
+#define AN8855_QP_CK_RST_CTRL_4 0x1022a310
+#define AN8855_QP_DIG_MODE_CTRL_0 0x1022a324
+#define AN8855_QP_DIG_MODE_CTRL_1 0x1022a330
+
+/* AN8855_SERDES_WRAPPER_BASE 0x1022c000 */
+#define AN8855_USGMII_CTRL_0 0x1022c000
+
+/* AN8855_QP_PMA_TOP_BASE 0x1022e000 */
+#define AN8855_PON_RXFEDIG_CTRL_0 0x1022e100
+#define AN8855_PON_RXFEDIG_CTRL_9 0x1022e124
+
+#define AN8855_SS_LCPLL_PWCTL_SETTING_2 0x1022e208
+#define AN8855_SS_LCPLL_TDC_FLT_2 0x1022e230
+#define AN8855_SS_LCPLL_TDC_FLT_5 0x1022e23c
+#define AN8855_SS_LCPLL_TDC_PCW_1 0x1022e248
+#define AN8855_INTF_CTRL_8 0x1022e320
+#define AN8855_INTF_CTRL_9 0x1022e324
+#define AN8855_INTF_CTRL_10 0x1022e328
+#define AN8855_INTF_CTRL_11 0x1022e32c
+#define AN8855_PLL_CTRL_0 0x1022e400
+#define AN8855_PLL_CTRL_2 0x1022e408
+#define AN8855_PLL_CTRL_3 0x1022e40c
+#define AN8855_PLL_CTRL_4 0x1022e410
+#define AN8855_PLL_CK_CTRL_0 0x1022e414
+#define AN8855_RX_DLY_0 0x1022e614
+#define AN8855_RX_CTRL_2 0x1022e630
+#define AN8855_RX_CTRL_5 0x1022e63c
+#define AN8855_RX_CTRL_6 0x1022e640
+#define AN8855_RX_CTRL_7 0x1022e644
+#define AN8855_RX_CTRL_8 0x1022e648
+#define AN8855_RX_CTRL_26 0x1022e690
+#define AN8855_RX_CTRL_42 0x1022e6d0
+
+/* AN8855_QP_ANA_CSR_BASE 0x1022f000 */
+#define AN8855_RG_QP_RX_DAC_EN 0x1022f000
+#define AN8855_RG_QP_RXAFE_RESERVE 0x1022f004
+#define AN8855_RG_QP_CDR_LPF_BOT_LIM 0x1022f008
+#define AN8855_RG_QP_CDR_LPF_MJV_LIM 0x1022f00c
+#define AN8855_RG_QP_CDR_LPF_SETVALUE 0x1022f014
+#define AN8855_RG_QP_CDR_PR_CKREF_DIV1 0x1022f018
+#define AN8855_RG_QP_CDR_PR_KBAND_DIV_PCIE 0x1022f01c
+#define AN8855_RG_QP_CDR_FORCE_IBANDLPF_R_OFF 0x1022f020
+#define AN8855_RG_QP_TX_MODE_16B_EN 0x1022f028
+#define AN8855_RG_QP_PLL_IPLL_DIG_PWR_SEL 0x1022f03c
+#define AN8855_RG_QP_PLL_SDM_ORD 0x1022f040
+
+/* AN8855_ETHER_SYS_BASE 0x1028c800 */
+#define AN8855_RG_GPHY_AFE_PWD 0x1028c840
+#define AN8855_RG_GPHY_SMI_ADDR 0x1028c848
+
+#define MIB_DESC(_s, _o, _n) \
+ { \
+ .size = (_s), \
+ .offset = (_o), \
+ .name = (_n), \
+ }
+
+struct an8855_mib_desc {
+ unsigned int size;
+ unsigned int offset;
+ const char *name;
+};
+
+struct an8855_fdb {
+ u16 vid;
+ u8 port_mask;
+ u8 aging;
+ u8 mac[6];
+ bool noarp;
+ u8 live;
+ u8 type;
+ u8 fid;
+ u8 ivl;
+};
+
+struct an8855_priv {
+ struct device *dev;
+ struct dsa_switch *ds;
+ struct mii_bus *bus;
+ struct regmap *regmap;
+ struct gpio_desc *reset_gpio;
+ /* Protect ATU or VLAN table access */
+ struct mutex reg_mutex;
+
+ struct phylink_pcs pcs;
+
+ unsigned int phy_base;
+
+ u8 mirror_rx;
+ u8 mirror_tx;
+
+ bool phy_require_calib;
+};
+
+#endif /* __AN8855_H */
--
2.45.2
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [net-next RFC PATCH 4/4] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY
2024-10-21 13:01 [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support Christian Marangi
` (2 preceding siblings ...)
2024-10-21 13:01 ` [net-next RFC PATCH 3/4] net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver Christian Marangi
@ 2024-10-21 13:01 ` Christian Marangi
2024-10-21 13:36 ` [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support Vladimir Oltean
4 siblings, 0 replies; 11+ messages in thread
From: Christian Marangi @ 2024-10-21 13:01 UTC (permalink / raw)
To: Christian Marangi, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Heiner Kallweit,
Russell King, Matthias Brugger, AngeloGioacchino Del Regno,
linux-arm-kernel, linux-mediatek, netdev, devicetree,
linux-kernel
Add support for Airoha AN8855 Internal Switch Gigabit PHY.
This is a simple PHY driver to configure and calibrate the PHY for the
AN8855 Switch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
MAINTAINERS | 1 +
drivers/net/phy/Kconfig | 5 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/air_an8855.c | 187 +++++++++++++++++++++++++++++++++++
4 files changed, 194 insertions(+)
create mode 100644 drivers/net/phy/air_an8855.c
diff --git a/MAINTAINERS b/MAINTAINERS
index e3077d9feee2..cf34add2a0bb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -726,6 +726,7 @@ S: Maintained
F: Documentation/devicetree/bindings/net/dsa/airoha,an8855.yaml
F: drivers/net/dsa/an8855.c
F: drivers/net/dsa/an8855.h
+F: drivers/net/phy/air_an8855.c
AIROHA ETHERNET DRIVER
M: Lorenzo Bianconi <lorenzo@kernel.org>
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index ee3ea0b56d48..1d474038ea7f 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -79,6 +79,11 @@ config SFP
comment "MII PHY device drivers"
+config AIR_AN8855_PHY
+ tristate "Airoha AN8855 Internal Gigabit PHY"
+ help
+ Currently supports the internal Airoha AN8855 Switch PHY.
+
config AIR_EN8811H_PHY
tristate "Airoha EN8811H 2.5 Gigabit PHY"
help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 90f886844381..baba7894785b 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -35,6 +35,7 @@ obj-y += $(sfp-obj-y) $(sfp-obj-m)
obj-$(CONFIG_ADIN_PHY) += adin.o
obj-$(CONFIG_ADIN1100_PHY) += adin1100.o
+obj-$(CONFIG_AIR_AN8855_PHY) += air_an8855.o
obj-$(CONFIG_AIR_EN8811H_PHY) += air_en8811h.o
obj-$(CONFIG_AMD_PHY) += amd.o
obj-$(CONFIG_AMCC_QT2025_PHY) += qt2025.o
diff --git a/drivers/net/phy/air_an8855.c b/drivers/net/phy/air_an8855.c
new file mode 100644
index 000000000000..d40b0b17a2e4
--- /dev/null
+++ b/drivers/net/phy/air_an8855.c
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/phy.h>
+#include <linux/module.h>
+#include <linux/bitfield.h>
+
+#define AN8855_PHY_PAGE_CTRL 0x1f
+#define AN8855_PHY_NORMAL_PAGE 0x0
+#define AN8855_PHY_EXT_PAGE 0x1
+
+#define AN8855_PHY_EXT_REG_14 0x14
+#define AN8855_PHY_EN_DOWN_SHFIT BIT(4)
+
+/* R50 Calibration regs in MDIO_MMD_VEND1 */
+#define AN8855_PHY_R500HM_RSEL_TX_AB 0x174
+#define AN8855_PHY_R50OHM_RSEL_TX_A_EN BIT(15)
+#define AN8855_PHY_R50OHM_RSEL_TX_A GENMASK(14, 8)
+#define AN8855_PHY_R50OHM_RSEL_TX_B_EN BIT(7)
+#define AN8855_PHY_R50OHM_RSEL_TX_B GENMASK(6, 0)
+#define AN8855_PHY_R500HM_RSEL_TX_CD 0x175
+#define AN8855_PHY_R50OHM_RSEL_TX_C_EN BIT(15)
+#define AN8855_PHY_R50OHM_RSEL_TX_C GENMASK(14, 8)
+#define AN8855_PHY_R50OHM_RSEL_TX_D_EN BIT(7)
+#define AN8855_PHY_R50OHM_RSEL_TX_D GENMASK(6, 0)
+
+/* PHY TX PAIR DELAY SELECT Register */
+#define PHY_TX_PAIR_DLY_SEL_GBE 0x013
+/* PHY ADC Register */
+#define PHY_RXADC_CTRL 0x0d8
+#define PHY_RXADC_REV_0 0x0d9
+#define PHY_RXADC_REV_1 0x0da
+
+#define AN8855_PHY_ID 0xc0ff0410
+
+static int an8855_config_init(struct phy_device *phydev)
+{
+ u8 calibration_data[4];
+ int ret;
+
+ memcpy(calibration_data, &phydev->dev_flags, sizeof(u32));
+
+ /* Enable HW auto downshift */
+ ret = phy_write(phydev, AN8855_PHY_PAGE_CTRL, AN8855_PHY_EXT_PAGE);
+ if (ret)
+ return ret;
+ ret = phy_set_bits(phydev, AN8855_PHY_EXT_REG_14,
+ AN8855_PHY_EN_DOWN_SHFIT);
+ if (ret)
+ return ret;
+ ret = phy_write(phydev, AN8855_PHY_PAGE_CTRL, AN8855_PHY_NORMAL_PAGE);
+ if (ret)
+ return ret;
+
+ /* Enable Asymmetric Pause Capability */
+ ret = phy_set_bits(phydev, MII_ADVERTISE, ADVERTISE_PAUSE_ASYM);
+ if (ret)
+ return ret;
+
+ /* Disable EEE */
+ ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
+ if (ret)
+ return ret;
+
+ /* Apply calibration values, if needed. */
+ if (phydev->dev_flags) {
+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, AN8855_PHY_R500HM_RSEL_TX_AB,
+ AN8855_PHY_R50OHM_RSEL_TX_A | AN8855_PHY_R50OHM_RSEL_TX_B,
+ FIELD_PREP(AN8855_PHY_R50OHM_RSEL_TX_A, calibration_data[0]) |
+ FIELD_PREP(AN8855_PHY_R50OHM_RSEL_TX_B, calibration_data[1]));
+ if (ret)
+ return ret;
+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, AN8855_PHY_R500HM_RSEL_TX_CD,
+ AN8855_PHY_R50OHM_RSEL_TX_C | AN8855_PHY_R50OHM_RSEL_TX_D,
+ FIELD_PREP(AN8855_PHY_R50OHM_RSEL_TX_C, calibration_data[2]) |
+ FIELD_PREP(AN8855_PHY_R50OHM_RSEL_TX_D, calibration_data[3]));
+ if (ret)
+ return ret;
+ }
+
+ /* Apply values to decude signal noise */
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, PHY_TX_PAIR_DLY_SEL_GBE, 0x4040);
+ if (ret)
+ return ret;
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, PHY_RXADC_CTRL, 0x1010);
+ if (ret)
+ return ret;
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, PHY_RXADC_REV_0, 0x100);
+ if (ret)
+ return ret;
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, PHY_RXADC_REV_1, 0x100);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int an8855_get_downshift(struct phy_device *phydev, u8 *data)
+{
+ int val;
+ int ret;
+
+ ret = phy_write(phydev, AN8855_PHY_PAGE_CTRL, AN8855_PHY_EXT_PAGE);
+ if (ret)
+ return ret;
+
+ val = phy_read(phydev, AN8855_PHY_EXT_REG_14);
+ *data = val & AN8855_PHY_EXT_REG_14 ? DOWNSHIFT_DEV_DEFAULT_COUNT :
+ DOWNSHIFT_DEV_DISABLE;
+
+ ret = phy_write(phydev, AN8855_PHY_PAGE_CTRL, AN8855_PHY_NORMAL_PAGE);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int an8855_set_downshift(struct phy_device *phydev, u8 cnt)
+{
+ int ret;
+
+ ret = phy_write(phydev, AN8855_PHY_PAGE_CTRL, AN8855_PHY_EXT_PAGE);
+ if (ret)
+ return ret;
+
+ if (cnt != DOWNSHIFT_DEV_DISABLE) {
+ ret = phy_set_bits(phydev, AN8855_PHY_EXT_REG_14,
+ AN8855_PHY_EN_DOWN_SHFIT);
+ if (ret)
+ return ret;
+ } else {
+ ret = phy_clear_bits(phydev, AN8855_PHY_EXT_REG_14,
+ AN8855_PHY_EN_DOWN_SHFIT);
+ if (ret)
+ return ret;
+ }
+
+ return phy_write(phydev, AN8855_PHY_PAGE_CTRL, AN8855_PHY_NORMAL_PAGE);
+}
+
+static int an8855_get_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return an8855_get_downshift(phydev, data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int an8855_set_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, const void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return an8855_set_downshift(phydev, *(const u8 *)data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static struct phy_driver An8855_driver[] = {
+{
+ PHY_ID_MATCH_EXACT(AN8855_PHY_ID),
+ .name = "Airoha AN8855 internal PHY",
+ /* PHY_GBIT_FEATURES */
+ .flags = PHY_IS_INTERNAL,
+ .config_init = an8855_config_init,
+ .soft_reset = genphy_soft_reset,
+ .get_tunable = an8855_get_tunable,
+ .set_tunable = an8855_set_tunable,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+}, };
+
+module_phy_driver(An8855_driver);
+
+static struct mdio_device_id __maybe_unused An8855_tbl[] = {
+ { PHY_ID_MATCH_EXACT(AN8855_PHY_ID) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, An8855_tbl);
+
+MODULE_DESCRIPTION("Airoha AN8855 PHY driver");
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_LICENSE("GPL");
--
2.45.2
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support
2024-10-21 13:01 [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support Christian Marangi
` (3 preceding siblings ...)
2024-10-21 13:01 ` [net-next RFC PATCH 4/4] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY Christian Marangi
@ 2024-10-21 13:36 ` Vladimir Oltean
2024-10-21 13:39 ` Christian Marangi
2024-10-21 14:11 ` Russell King (Oracle)
4 siblings, 2 replies; 11+ messages in thread
From: Vladimir Oltean @ 2024-10-21 13:36 UTC (permalink / raw)
To: Christian Marangi
Cc: Arınç ÜNAL, Daniel Golle, DENG Qingfang, Sean Wang,
Andrew Lunn, Florian Fainelli, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Heiner Kallweit, Russell King, Matthias Brugger,
AngeloGioacchino Del Regno, linux-arm-kernel, linux-mediatek,
netdev, devicetree, linux-kernel
On Mon, Oct 21, 2024 at 03:01:55PM +0200, Christian Marangi wrote:
> It's conceptually similar to mediatek switch but register and bits
> are different.
Is it impractical to use struct regmap_field to abstract those
differences away and reuse the mt7530 driver's control flow? What is the
relationship between the Airoha and Mediatek IP anyway? The mt7530
maintainers should also be consulted w.r.t. whether code sharing is in
the common interest (I copied them).
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support
2024-10-21 13:36 ` [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support Vladimir Oltean
@ 2024-10-21 13:39 ` Christian Marangi
2024-10-21 13:50 ` Vladimir Oltean
2024-10-21 14:11 ` Russell King (Oracle)
1 sibling, 1 reply; 11+ messages in thread
From: Christian Marangi @ 2024-10-21 13:39 UTC (permalink / raw)
To: Vladimir Oltean
Cc: Arınç ÜNAL, Daniel Golle, DENG Qingfang, Sean Wang,
Andrew Lunn, Florian Fainelli, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Heiner Kallweit, Russell King, Matthias Brugger,
AngeloGioacchino Del Regno, linux-arm-kernel, linux-mediatek,
netdev, devicetree, linux-kernel
On Mon, Oct 21, 2024 at 04:36:05PM +0300, Vladimir Oltean wrote:
> On Mon, Oct 21, 2024 at 03:01:55PM +0200, Christian Marangi wrote:
> > It's conceptually similar to mediatek switch but register and bits
> > are different.
>
> Is it impractical to use struct regmap_field to abstract those
> differences away and reuse the mt7530 driver's control flow? What is the
> relationship between the Airoha and Mediatek IP anyway? The mt7530
> maintainers should also be consulted w.r.t. whether code sharing is in
> the common interest (I copied them).
Some logic are similar for ATU or VLAN handling but then they added bits
in the middle of the register and moved some in other place.
Happy of being contradicted but from what I checked adapting the mtk
code would introduce lots of condition and wrapper and I feel it would
be actually worse than keeping the 2 codebase alone.
Would love some help by mt7530 to catch some very common case.
--
Ansuel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support
2024-10-21 13:39 ` Christian Marangi
@ 2024-10-21 13:50 ` Vladimir Oltean
0 siblings, 0 replies; 11+ messages in thread
From: Vladimir Oltean @ 2024-10-21 13:50 UTC (permalink / raw)
To: Christian Marangi
Cc: Arınç ÜNAL, Daniel Golle, DENG Qingfang, Sean Wang,
Andrew Lunn, Florian Fainelli, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Heiner Kallweit, Russell King, Matthias Brugger,
AngeloGioacchino Del Regno, linux-arm-kernel, linux-mediatek,
netdev, devicetree, linux-kernel
On Mon, Oct 21, 2024 at 03:39:26PM +0200, Christian Marangi wrote:
> On Mon, Oct 21, 2024 at 04:36:05PM +0300, Vladimir Oltean wrote:
> > On Mon, Oct 21, 2024 at 03:01:55PM +0200, Christian Marangi wrote:
> > > It's conceptually similar to mediatek switch but register and bits
> > > are different.
> >
> > Is it impractical to use struct regmap_field to abstract those
> > differences away and reuse the mt7530 driver's control flow? What is the
> > relationship between the Airoha and Mediatek IP anyway? The mt7530
> > maintainers should also be consulted w.r.t. whether code sharing is in
> > the common interest (I copied them).
>
> Some logic are similar for ATU or VLAN handling but then they added bits
> in the middle of the register and moved some in other place.
>
> Happy of being contradicted but from what I checked adapting the mtk
> code would introduce lots of condition and wrapper and I feel it would
> be actually worse than keeping the 2 codebase alone.
>
> Would love some help by mt7530 to catch some very common case.
As long as the control flow is reasonably similar, the REG_FIELD() macro
is able to deal with register fields which have moved from one place to
another between hardware variants.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [net-next RFC PATCH 3/4] net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver
2024-10-21 13:01 ` [net-next RFC PATCH 3/4] net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver Christian Marangi
@ 2024-10-21 14:08 ` Russell King (Oracle)
2024-10-21 14:39 ` Christian Marangi
0 siblings, 1 reply; 11+ messages in thread
From: Russell King (Oracle) @ 2024-10-21 14:08 UTC (permalink / raw)
To: Christian Marangi
Cc: Andrew Lunn, Florian Fainelli, Vladimir Oltean, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Heiner Kallweit,
Matthias Brugger, AngeloGioacchino Del Regno, linux-arm-kernel,
linux-mediatek, netdev, devicetree, linux-kernel
On Mon, Oct 21, 2024 at 03:01:58PM +0200, Christian Marangi wrote:
> +static int an8855_mii_read32(struct mii_bus *bus, u8 phy_id, u32 reg, u32 *val)
> +{
> + u16 lo, hi;
> + int ret;
> +
> + ret = bus->write(bus, phy_id, 0x1f, 0x4);
> + ret = bus->write(bus, phy_id, 0x10, 0);
> +
> + ret = bus->write(bus, phy_id, 0x15, ((reg >> 16) & 0xFFFF));
These assignments above are useless on their own. What if one of them
fails?
Please also consider __mdiobus_write() and __mdiobus_read() which will
check that the bus lock is held, and also give the ability to trace
the bus activity.
> + ret = bus->write(bus, phy_id, 0x16, (reg & 0xFFFF));
> + if (ret < 0) {
> + dev_err_ratelimited(&bus->dev,
> + "failed to read an8855 register\n");
> + return ret;
> + }
> +
> + lo = bus->read(bus, phy_id, 0x18);
> + hi = bus->read(bus, phy_id, 0x17);
What if one of these fails, and the negative value gets clamped to a
u16?
> +
> + ret = bus->write(bus, phy_id, 0x1f, 0);
> + if (ret < 0) {
> + dev_err_ratelimited(&bus->dev,
> + "failed to read an8855 register\n");
> + return ret;
> + }
> +
> + *val = (hi << 16) | (lo & 0xffff);
> +
> + return 0;
> +}
> +
> +static int an8855_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
> +{
> + struct an8855_priv *priv = ctx;
> + struct mii_bus *bus = priv->bus;
> + int ret;
> +
> + scoped_guard(mdio_mutex_nested, &bus->mdio_lock)
> + ret = an8855_mii_read32(bus, priv->phy_base,
> + reg, val);
I'm really not a fan of these non-C like code structures that make the
code harder to review, and can add (and already have resulted in) bugs,
but everyone to their own. Al Viro found a whole new class of bug caused
by these magic things. I'd much prefer explicit C code that can be read
and reviewed over "let the compiler do magic" stuff.
> +
> + return ret < 0 ? ret : 0;
> +}
> +
> +static int an8855_mii_write32(struct mii_bus *bus, u8 phy_id, u32 reg, u32 val)
> +{
> + int ret;
> +
> + ret = bus->write(bus, phy_id, 0x1f, 0x4);
> + ret = bus->write(bus, phy_id, 0x10, 0);
> +
> + ret = bus->write(bus, phy_id, 0x11, ((reg >> 16) & 0xFFFF));
> + ret = bus->write(bus, phy_id, 0x12, (reg & 0xFFFF));
> +
> + ret = bus->write(bus, phy_id, 0x13, ((val >> 16) & 0xFFFF));
> + ret = bus->write(bus, phy_id, 0x14, (val & 0xFFFF));
Same as above.
> +
> + ret = bus->write(bus, phy_id, 0x1f, 0);
> + if (ret < 0)
> + dev_err_ratelimited(&bus->dev,
> + "failed to write an8855 register\n");
> +
> + return 0;
> +}
...
> +static int an8855_set_mac_eee(struct dsa_switch *ds, int port,
> + struct ethtool_keee *eee)
> +{
> + struct an8855_priv *priv = ds->priv;
> + u32 reg;
> + int ret;
> +
> + if (eee->eee_enabled) {
> + ret = regmap_read(priv->regmap, AN8855_PMCR_P(port), ®);
> + if (ret)
> + return ret;
> + if (reg & AN8855_PMCR_FORCE_MODE) {
> + switch (reg & AN8855_PMCR_FORCE_SPEED) {
> + case AN8855_PMCR_FORCE_SPEED_1000:
> + reg |= AN8855_PMCR_FORCE_EEE1G;
> + break;
> + case AN8855_PMCR_FORCE_SPEED_100:
> + reg |= AN8855_PMCR_FORCE_EEE100;
> + break;
> + default:
> + break;
> + }
> + ret = regmap_write(priv->regmap, AN8855_PMCR_P(port), reg);
> + if (ret)
> + return ret;
What logic are you trying to implement here? It looks like you're
forcing EEE to be enabled here if AN8855_PMCR_FORCE_MODE was set, which,
reading the code in link_{up,down} it always will be when the link
happens to be down when the user configures EEE. This makes no sense.
EEE is supposed to be enabled as a result of the PHY's negotiation with
the link partner. There shouldn't be any forcing.
> + }
> + if (eee->tx_lpi_enabled) {
> + ret = regmap_set_bits(priv->regmap, AN8855_PMEEECR_P(port),
> + AN8855_LPI_MODE_EN);
> + if (ret)
> + return ret;
> + } else {
> + ret = regmap_clear_bits(priv->regmap, AN8855_PMEEECR_P(port),
> + AN8855_LPI_MODE_EN);
> + if (ret)
> + return ret;
> + }
Maybe:
ret = regmap_update_bits(priv->regmap, AN8855_PMEEECR_P(port),
AN8855_LPI_MODE_EN,
eee->tx_lpi_enabled ?
AN8855_LPI_MODE_EN : 0);
if (ret)
return ret;
> + } else {
> + ret = regmap_clear_bits(priv->regmap, AN8855_PMCR_P(port),
> + AN8855_PMCR_FORCE_EEE1G |
> + AN8855_PMCR_FORCE_EEE100);
> + if (ret)
> + return ret;
> +
> + ret = regmap_clear_bits(priv->regmap, AN8855_PMEEECR_P(port),
> + AN8855_LPI_MODE_EN);
> + if (ret)
> + return ret;
This probably needs to interact with the link up/down state.
Really, I need to find the time to sort out adding EEE stuff to phylink
that is keyed from phylib's implementation, but not at the moment.
> + }
> +
> + return 0;
> +}
> +
> +static int an8855_get_mac_eee(struct dsa_switch *ds, int port,
> + struct ethtool_keee *eee)
> +{
> + struct an8855_priv *priv = ds->priv;
> + u32 reg;
> + int ret;
> +
> + ret = regmap_read(priv->regmap, AN8855_PMEEECR_P(port), ®);
> + if (ret)
> + return ret;
> + eee->tx_lpi_enabled = reg & AN8855_LPI_MODE_EN;
This is fine, the MAC is responsible for LPI transmission.
> +
> + ret = regmap_read(priv->regmap, AN8855_CKGCR, ®);
> + if (ret)
> + return ret;
> + /* Global LPI TXIDLE Threshold, default 60ms (unit 2us) */
> + eee->tx_lpi_timer = FIELD_GET(AN8855_LPI_TXIDLE_THD_MASK, reg) / 500;
Also fine.
> +
> + ret = regmap_read(priv->regmap, AN8855_PMSR_P(port), ®);
> + if (ret)
> + return ret;
> + eee->eee_active = reg & (AN8855_PMSR_EEE1G | AN8855_PMSR_EEE100M);
This isn't. You're overwriting the value set by
genphy_c45_ethtool_get_eee(), which has already determined whether
EEE is active from the PHY's negotiation state, and this is what
eee_active is supposed to indicate.
> +
> + return 0;
> +}
> +
> +static u32 en8855_get_phy_flags(struct dsa_switch *ds, int port)
> +{
> + struct an8855_priv *priv = ds->priv;
> + u8 calibration_data[4] = { };
> + u8 shift_sel;
> + u32 val;
> + int ret;
> + int i;
> +
> + /* PHY doesn't need calibration */
> + if (!priv->phy_require_calib)
> + return 0;
> +
> + /* Read Calibration value */
> + for (i = 0; i < sizeof(u32); i++) {
> + ret = regmap_read(priv->regmap, AN8855_EFUSE_DATA0 +
> + ((3 + i + (4 * port)) * 4), &val);
> + if (ret)
> + return 0;
> +
> + shift_sel = FIELD_GET(AN8855_EFUSE_R50O, val);
> + calibration_data[i] = en8855_get_r50ohm_val(shift_sel);
> + }
> +
> + memcpy(&val, calibration_data, sizeof(u32));
> + return val;
Ewwwwwww.
So you're reading from fuses, and then passing them as phy flags.
PHY flags are no longer 100% available for whatever you want to use
them for - some have standard meanings:
* - Bits [15:0] are free to use by the PHY driver to communicate
* driver specific behavior.
* - Bits [23:16] are currently reserved for future use.
* - Bits [31:24] are reserved for defining generic
* PHY driver behavior.
For example, PHY_F_NO_IRQ and PHY_F_RXC_ALWAYS_ON are already allocated
in the top 8 bits.
> +static void
> +an8855_phylink_mac_config(struct phylink_config *config, unsigned int mode,
> + const struct phylink_link_state *state)
> +{
> + struct dsa_port *dp = dsa_phylink_to_port(config);
> + struct dsa_switch *ds = dp->ds;
> + struct an8855_priv *priv;
> + int port = dp->index;
> +
> + priv = ds->priv;
> +
> + switch (port) {
> + case 0:
> + case 1:
> + case 2:
> + case 3:
> + case 4:
> + return;
> + case 5:
> + break;
> + default:
> + dev_err(ds->dev, "unsupported port: %d", port);
> + return;
> + }
> +
> + if (state->interface == PHY_INTERFACE_MODE_2500BASEX &&
> + phylink_autoneg_inband(mode))
> + dev_err(ds->dev, "in-band negotiation unsupported");
Please check this in the PCS code.
> +
> + regmap_update_bits(priv->regmap, AN8855_PMCR_P(port),
> + AN8855_PMCR_IFG_XMIT | AN8855_PMCR_MAC_MODE |
> + AN8855_PMCR_BACKOFF_EN | AN8855_PMCR_BACKPR_EN,
> + FIELD_PREP(AN8855_PMCR_IFG_XMIT, 0x1) |
> + AN8855_PMCR_MAC_MODE | AN8855_PMCR_BACKOFF_EN |
> + AN8855_PMCR_BACKPR_EN);
> +}
> +
> +static void an8855_phylink_get_caps(struct dsa_switch *ds, int port,
> + struct phylink_config *config)
> +{
> + switch (port) {
> + case 0:
> + case 1:
> + case 2:
> + case 3:
> + case 4:
> + __set_bit(PHY_INTERFACE_MODE_GMII,
> + config->supported_interfaces);
> + __set_bit(PHY_INTERFACE_MODE_INTERNAL,
> + config->supported_interfaces);
> + break;
> + case 5:
> + phy_interface_set_rgmii(config->supported_interfaces);
> + __set_bit(PHY_INTERFACE_MODE_SGMII,
> + config->supported_interfaces);
> + __set_bit(PHY_INTERFACE_MODE_2500BASEX,
> + config->supported_interfaces);
> + break;
> + }
> +
> + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
> + MAC_10 | MAC_100 | MAC_1000FD;
> +}
> +
> +static void
> +an8855_phylink_mac_link_down(struct phylink_config *config, unsigned int mode,
> + phy_interface_t interface)
> +{
> + struct dsa_port *dp = dsa_phylink_to_port(config);
> + struct an8855_priv *priv = dp->ds->priv;
> +
> + /* Disable TX/RX, force link down */
> + regmap_update_bits(priv->regmap, AN8855_PMCR_P(dp->index),
> + AN8855_PMCR_TX_EN | AN8855_PMCR_RX_EN |
> + AN8855_PMCR_FORCE_MODE | AN8855_PMCR_FORCE_LNK,
> + AN8855_PMCR_FORCE_MODE);
Does forcing the link down prevent the AN8855_PMSR_LNK bit being set?
If not, please document that here because the current code goes against
what's documented in phylink:
* If @mode is not an in-band negotiation mode (as defined by
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* phylink_autoneg_inband()), force the link down and disable any
* Energy Efficient Ethernet MAC configuration. ...
> +}
> +
> +static void
> +an8855_phylink_mac_link_up(struct phylink_config *config,
> + struct phy_device *phydev, unsigned int mode,
> + phy_interface_t interface, int speed, int duplex,
> + bool tx_pause, bool rx_pause)
> +{
> + struct dsa_port *dp = dsa_phylink_to_port(config);
> + struct an8855_priv *priv = dp->ds->priv;
> + int port = dp->index;
> + u32 reg;
> +
> + reg = regmap_read(priv->regmap, AN8855_PMCR_P(port), ®);
> + if (phylink_autoneg_inband(mode)) {
> + reg &= ~AN8855_PMCR_FORCE_MODE;
> + } else {
> + reg |= AN8855_PMCR_FORCE_MODE | AN8855_PMCR_FORCE_LNK;
> +
> + reg &= ~AN8855_PMCR_FORCE_SPEED;
> + switch (speed) {
> + case SPEED_10:
> + reg |= AN8855_PMCR_FORCE_SPEED_10;
> + break;
> + case SPEED_100:
> + reg |= AN8855_PMCR_FORCE_SPEED_100;
> + break;
> + case SPEED_1000:
> + reg |= AN8855_PMCR_FORCE_SPEED_1000;
> + break;
> + case SPEED_2500:
> + reg |= AN8855_PMCR_FORCE_SPEED_2500;
> + break;
> + case SPEED_5000:
> + reg |= AN8855_PMCR_FORCE_SPEED_5000;
> + break;
> + }
> +
> + reg &= AN8855_PMCR_FORCE_FDX;
> + if (duplex == DUPLEX_FULL)
> + reg |= AN8855_PMCR_FORCE_FDX;
> +
> + reg &= AN8855_PMCR_RX_FC_EN;
> + if (rx_pause || dsa_port_is_cpu(dp))
> + reg |= AN8855_PMCR_RX_FC_EN;
> +
> + reg &= AN8855_PMCR_TX_FC_EN;
> + if (rx_pause || dsa_port_is_cpu(dp))
> + reg |= AN8855_PMCR_TX_FC_EN;
> +
> + /* Disable any EEE options */
> + reg &= ~(AN8855_PMCR_FORCE_EEE5G | AN8855_PMCR_FORCE_EEE2P5G |
> + AN8855_PMCR_FORCE_EEE1G | AN8855_PMCR_FORCE_EEE100);
> + }
> +
> + reg |= AN8855_PMCR_TX_EN | AN8855_PMCR_RX_EN;
> +
> + regmap_write(priv->regmap, AN8855_PMCR_P(port), reg);
> +}
> +
> +static void an8855_pcs_get_state(struct phylink_pcs *pcs,
> + struct phylink_link_state *state)
> +{
> + struct an8855_priv *priv = container_of(pcs, struct an8855_priv, pcs);
> + u32 val;
> + int ret;
> +
> + ret = regmap_read(priv->regmap, AN8855_PMSR_P(AN8855_CPU_PORT), &val);
> + if (ret < 0) {
> + state->link = false;
> + return;
> + }
> +
> + state->link = !!(val & AN8855_PMSR_LNK);
> + state->an_complete = state->link;
> + state->duplex = (val & AN8855_PMSR_DPX) ? DUPLEX_FULL :
> + DUPLEX_HALF;
> +
> + switch (val & AN8855_PMSR_SPEED) {
> + case AN8855_PMSR_SPEED_10:
> + state->speed = SPEED_10;
> + break;
> + case AN8855_PMSR_SPEED_100:
> + state->speed = SPEED_100;
> + break;
> + case AN8855_PMSR_SPEED_1000:
> + state->speed = SPEED_1000;
> + break;
> + case AN8855_PMSR_SPEED_2500:
> + state->speed = SPEED_2500;
> + break;
> + case AN8855_PMSR_SPEED_5000:
> + state->speed = SPEED_5000;
> + break;
> + default:
> + state->speed = SPEED_UNKNOWN;
> + break;
> + }
> +
> + if (val & AN8855_PMSR_RX_FC)
> + state->pause |= MLO_PAUSE_RX;
> + if (val & AN8855_PMSR_TX_FC)
> + state->pause |= MLO_PAUSE_TX;
> +}
> +
> +static int an8855_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
> + phy_interface_t interface,
> + const unsigned long *advertising,
> + bool permit_pause_to_mac)
> +{
> + struct an8855_priv *priv = container_of(pcs, struct an8855_priv, pcs);
> + u32 val;
> + int ret;
> +
> + switch (interface) {
> + case PHY_INTERFACE_MODE_RGMII:
> + return 0;
> + case PHY_INTERFACE_MODE_SGMII:
> + break;
> + case PHY_INTERFACE_MODE_2500BASEX:
> + if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
> + return -EINVAL;
> +
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + /* !!! WELCOME TO HELL !!! */
> +
> + /* TX FIR - improve TX EYE */
> + ret = regmap_update_bits(priv->regmap, AN8855_INTF_CTRL_10, GENMASK(21, 16),
> + FIELD_PREP(GENMASK(21, 16), 0x20));
> + if (ret)
> + return ret;
> + ret = regmap_update_bits(priv->regmap, AN8855_INTF_CTRL_10, GENMASK(28, 24),
> + FIELD_PREP(GENMASK(28, 24), 0x4));
> + if (ret)
> + return ret;
> + ret = regmap_set_bits(priv->regmap, AN8855_INTF_CTRL_10, BIT(29));
> + if (ret)
> + return ret;
> +
> + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> + val = 0x0;
> + else
> + val = 0xd;
> + ret = regmap_update_bits(priv->regmap, AN8855_INTF_CTRL_11, GENMASK(5, 0),
> + FIELD_PREP(GENMASK(5, 0), val));
> + if (ret)
> + return ret;
> + ret = regmap_set_bits(priv->regmap, AN8855_INTF_CTRL_11, BIT(6));
> + if (ret)
> + return ret;
> +
> + /* RX CDR - improve RX Jitter Tolerance */
> + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> + val = 0x5;
> + else
> + val = 0x6;
> + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_BOT_LIM, GENMASK(26, 24),
> + FIELD_PREP(GENMASK(26, 24), val));
> + if (ret)
> + return ret;
> + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_BOT_LIM, GENMASK(22, 20),
> + FIELD_PREP(GENMASK(22, 20), val));
> + if (ret)
> + return ret;
> +
> + /* PLL */
> + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> + val = 0x1;
> + else
> + val = 0x0;
> + ret = regmap_update_bits(priv->regmap, AN8855_QP_DIG_MODE_CTRL_1, GENMASK(3, 2),
> + FIELD_PREP(GENMASK(3, 2), val));
> + if (ret)
> + return ret;
> +
> + /* PLL - LPF */
> + ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(1, 0),
> + FIELD_PREP(GENMASK(1, 0), 0x1));
> + if (ret)
> + return ret;
> + ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(4, 2),
> + FIELD_PREP(GENMASK(4, 2), 0x5));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(6) | BIT(7));
> + if (ret)
> + return ret;
> + ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(10, 8),
> + FIELD_PREP(GENMASK(10, 8), 0x3));
> + if (ret)
> + return ret;
> + ret = regmap_set_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(29));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(12) | BIT(13));
> + if (ret)
> + return ret;
> +
> + /* PLL - ICO */
> + ret = regmap_set_bits(priv->regmap, AN8855_PLL_CTRL_4, BIT(2));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(14));
> + if (ret)
> + return ret;
> +
> + /* PLL - CHP */
> + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> + val = 0x6;
> + else
> + val = 0x4;
> + ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(19, 16),
> + FIELD_PREP(GENMASK(19, 16), val));
> + if (ret)
> + return ret;
> +
> + /* PLL - PFD */
> + ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(21, 20),
> + FIELD_PREP(GENMASK(21, 20), 0x1));
> + if (ret)
> + return ret;
> + ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(25, 24),
> + FIELD_PREP(GENMASK(25, 24), 0x1));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(26));
> + if (ret)
> + return ret;
> +
> + /* PLL - POSTDIV */
> + ret = regmap_set_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(22));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(27));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(28));
> + if (ret)
> + return ret;
> +
> + /* PLL - SDM */
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_4, BIT(3) | BIT(4));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(30));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_SS_LCPLL_PWCTL_SETTING_2,
> + GENMASK(17, 16),
> + FIELD_PREP(GENMASK(17, 16), 0x1));
> + if (ret)
> + return ret;
> +
> + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> + val = 0x7a000000;
> + else
> + val = 0x48000000;
> + ret = regmap_write(priv->regmap, AN8855_SS_LCPLL_TDC_FLT_2, val);
> + if (ret)
> + return ret;
> + ret = regmap_write(priv->regmap, AN8855_SS_LCPLL_TDC_PCW_1, val);
> + if (ret)
> + return ret;
> +
> + ret = regmap_clear_bits(priv->regmap, AN8855_SS_LCPLL_TDC_FLT_5, BIT(24));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CK_CTRL_0, BIT(8));
> + if (ret)
> + return ret;
> +
> + /* PLL - SS */
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_3, GENMASK(15, 0));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_4, GENMASK(1, 0));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_3, GENMASK(31, 16));
> + if (ret)
> + return ret;
> +
> + /* PLL - TDC */
> + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CK_CTRL_0, BIT(9));
> + if (ret)
> + return ret;
> +
> + ret = regmap_set_bits(priv->regmap, AN8855_RG_QP_PLL_SDM_ORD, BIT(3));
> + if (ret)
> + return ret;
> + ret = regmap_set_bits(priv->regmap, AN8855_RG_QP_PLL_SDM_ORD, BIT(4));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_RX_DAC_EN, GENMASK(17, 16),
> + FIELD_PREP(GENMASK(17, 16), 0x2));
> + if (ret)
> + return ret;
> +
> + /* TCL Disable (only for Co-SIM) */
> + ret = regmap_clear_bits(priv->regmap, AN8855_PON_RXFEDIG_CTRL_0, BIT(12));
> + if (ret)
> + return ret;
> +
> + /* TX Init */
> + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> + val = 0x4;
> + else
> + val = 0x0;
> + ret = regmap_clear_bits(priv->regmap, AN8855_RG_QP_TX_MODE_16B_EN, BIT(0));
> + if (ret)
> + return ret;
> + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_TX_MODE_16B_EN,
> + GENMASK(31, 16),
> + FIELD_PREP(GENMASK(31, 16), val));
> + if (ret)
> + return ret;
> +
> + /* RX Control/Init */
> + ret = regmap_set_bits(priv->regmap, AN8855_RG_QP_RXAFE_RESERVE, BIT(11));
> + if (ret)
> + return ret;
> +
> + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> + val = 0x1;
> + else
> + val = 0x2;
> + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_MJV_LIM,
> + GENMASK(5, 4),
> + FIELD_PREP(GENMASK(5, 4), val));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_SETVALUE,
> + GENMASK(28, 25),
> + FIELD_PREP(GENMASK(28, 25), 0x1));
> + if (ret)
> + return ret;
> + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_SETVALUE,
> + GENMASK(31, 29),
> + FIELD_PREP(GENMASK(31, 29), 0x6));
> + if (ret)
> + return ret;
> +
> + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> + val = 0xf;
> + else
> + val = 0xc;
> + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_PR_CKREF_DIV1,
> + GENMASK(12, 8),
> + FIELD_PREP(GENMASK(12, 8), val));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_PR_KBAND_DIV_PCIE,
> + GENMASK(12, 8),
> + FIELD_PREP(GENMASK(12, 8), 0x19));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_RG_QP_CDR_PR_KBAND_DIV_PCIE, BIT(6));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_FORCE_IBANDLPF_R_OFF,
> + GENMASK(12, 6),
> + FIELD_PREP(GENMASK(12, 6), 0x21));
> + if (ret)
> + return ret;
> + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_FORCE_IBANDLPF_R_OFF,
> + GENMASK(17, 16),
> + FIELD_PREP(GENMASK(17, 16), 0x2));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_RG_QP_CDR_FORCE_IBANDLPF_R_OFF, BIT(13));
> + if (ret)
> + return ret;
> +
> + ret = regmap_clear_bits(priv->regmap, AN8855_RG_QP_CDR_PR_KBAND_DIV_PCIE, BIT(30));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_PR_CKREF_DIV1,
> + GENMASK(26, 24),
> + FIELD_PREP(GENMASK(26, 24), 0x4));
> + if (ret)
> + return ret;
> +
> + ret = regmap_set_bits(priv->regmap, AN8855_RX_CTRL_26, BIT(23));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_RX_CTRL_26, BIT(24));
> + if (ret)
> + return ret;
> + ret = regmap_set_bits(priv->regmap, AN8855_RX_CTRL_26, BIT(26));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_RX_DLY_0, GENMASK(7, 0),
> + FIELD_PREP(GENMASK(7, 0), 0x6f));
> + if (ret)
> + return ret;
> + ret = regmap_set_bits(priv->regmap, AN8855_RX_DLY_0, GENMASK(13, 8));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_42, GENMASK(12, 0),
> + FIELD_PREP(GENMASK(12, 0), 0x150));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_2, GENMASK(28, 16),
> + FIELD_PREP(GENMASK(28, 16), 0x150));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_PON_RXFEDIG_CTRL_9,
> + GENMASK(2, 0),
> + FIELD_PREP(GENMASK(2, 0), 0x1));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_8, GENMASK(27, 16),
> + FIELD_PREP(GENMASK(27, 16), 0x200));
> + if (ret)
> + return ret;
> + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_8, GENMASK(14, 0),
> + FIELD_PREP(GENMASK(14, 0), 0xfff));
> + if (ret)
> + return ret;
> +
> + /* Frequency meter */
> + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> + val = 0x10;
> + else
> + val = 0x28;
> + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_5, GENMASK(29, 10),
> + FIELD_PREP(GENMASK(29, 10), val));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_6, GENMASK(19, 0),
> + FIELD_PREP(GENMASK(19, 0), 0x64));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_7, GENMASK(19, 0),
> + FIELD_PREP(GENMASK(19, 0), 0x2710));
> + if (ret)
> + return ret;
> +
> + ret = regmap_set_bits(priv->regmap, AN8855_PLL_CTRL_0, BIT(0));
> + if (ret)
> + return ret;
> +
> + /* PCS Init */
> + if (interface == PHY_INTERFACE_MODE_SGMII &&
> + neg_mode == PHYLINK_PCS_NEG_INBAND_DISABLED) {
> + ret = regmap_clear_bits(priv->regmap, AN8855_QP_DIG_MODE_CTRL_0,
> + BIT(0));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_QP_DIG_MODE_CTRL_0,
> + GENMASK(5, 4));
> + if (ret)
> + return ret;
Do these really need to be done separately, or can the two be combined?
ret = regmap_clear_bits(priv->regmap, AN8855_QP_DIG_MODE_CTRL_0,
GENMASK(5, 4) | BIT(0));
?
> + }
> +
> + ret = regmap_clear_bits(priv->regmap, AN8855_RG_HSGMII_PCS_CTROL_1, BIT(30));
> + if (ret)
> + return ret;
> +
> + if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
> + /* Set AN Ability - Interrupt */
> + ret = regmap_set_bits(priv->regmap, AN8855_SGMII_REG_AN_FORCE_CL37, BIT(0));
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, AN8855_SGMII_REG_AN_13,
> + GENMASK(5, 0),
> + FIELD_PREP(GENMASK(5, 0), 0xb));
> + if (ret)
> + return ret;
> + ret = regmap_set_bits(priv->regmap, AN8855_SGMII_REG_AN_13, BIT(8));
> + if (ret)
> + return ret;
> + }
Eh?
> +
> + /* Rate Adaption - GMII path config. */
> + if (interface == PHY_INTERFACE_MODE_2500BASEX) {
> + ret = regmap_clear_bits(priv->regmap, AN8855_RATE_ADP_P0_CTRL_0, BIT(31));
> + if (ret)
> + return ret;
> + } else {
> + if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
> + ret = regmap_set_bits(priv->regmap, AN8855_MII_RA_AN_ENABLE, BIT(0));
> + if (ret)
> + return ret;
> + } else {
> + ret = regmap_set_bits(priv->regmap, AN8855_RG_AN_SGMII_MODE_FORCE,
> + BIT(0));
> + if (ret)
> + return ret;
> + ret = regmap_clear_bits(priv->regmap, AN8855_RG_AN_SGMII_MODE_FORCE,
> + GENMASK(5, 4));
> + if (ret)
> + return ret;
> +
> + ret = regmap_clear_bits(priv->regmap, AN8855_RATE_ADP_P0_CTRL_0,
> + GENMASK(3, 0));
> + if (ret)
> + return ret;
> + }
> +
> + ret = regmap_set_bits(priv->regmap, AN8855_RATE_ADP_P0_CTRL_0, BIT(28));
> + if (ret)
> + return ret;
> + }
> +
> + ret = regmap_set_bits(priv->regmap, AN8855_RG_RATE_ADAPT_CTRL_0, BIT(0));
> + if (ret)
> + return ret;
> + ret = regmap_set_bits(priv->regmap, AN8855_RG_RATE_ADAPT_CTRL_0, BIT(4));
> + if (ret)
> + return ret;
> + ret = regmap_set_bits(priv->regmap, AN8855_RG_RATE_ADAPT_CTRL_0, GENMASK(27, 26));
> + if (ret)
> + return ret;
> +
> + /* Disable AN */
> + if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
> + ret = regmap_set_bits(priv->regmap, AN8855_SGMII_REG_AN0,
> + AN8855_SGMII_AN_ENABLE);
> + if (ret)
> + return ret;
> + } else {
> + ret = regmap_clear_bits(priv->regmap, AN8855_SGMII_REG_AN0,
> + AN8855_SGMII_AN_ENABLE);
> + if (ret)
> + return ret;
> + }
Again, using regmap_update_bits() with a mask and value is probably more
readable here. This looks like it's twiddling a standard BMCR_ANENABLE
bit.
> +
> + if (interface == PHY_INTERFACE_MODE_SGMII &&
> + neg_mode == PHYLINK_PCS_NEG_INBAND_DISABLED) {
> + ret = regmap_set_bits(priv->regmap, AN8855_PHY_RX_FORCE_CTRL_0, BIT(4));
> + if (ret)
> + return ret;
> + }
Eh?
> +
> + /* Force Speed */
> + if (interface == PHY_INTERFACE_MODE_2500BASEX ||
> + neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
> + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> + val = 0x3;
> + else
> + val = 0x2;
> + ret = regmap_set_bits(priv->regmap, AN8855_SGMII_STS_CTRL_0, BIT(2));
> + if (ret)
> + return ret;
> + ret = regmap_update_bits(priv->regmap, AN8855_SGMII_STS_CTRL_0,
> + GENMASK(5, 4),
> + FIELD_PREP(GENMASK(5, 4), val));
> + if (ret)
> + return ret;
> + }
I don't understand why speed should be forced if inband is enabled or
we're using 2500base-X.
> +
> + /* bypass flow control to MAC */
> + ret = regmap_write(priv->regmap, AN8855_MSG_RX_LIK_STS_0, 0x01010107);
> + if (ret)
> + return ret;
> + ret = regmap_write(priv->regmap, AN8855_MSG_RX_LIK_STS_2, 0x00000EEF);
> + if (ret)
> + return ret;
Overall, I'd like more comments about what stuff is doing, especially
the AN stuff. I can't make head nor tail of e.g. is there any
advertisement being programmed or not.
Also, given that this will be called _on its own_ if the user requests
the inband advertisement to be changed, we don't want to unnecessarily
disrupt the link. What would happen if this code runs when the link is
up?
> +
> + return 0;
> +}
> +
> +static void an8855_pcs_an_restart(struct phylink_pcs *pcs)
> +{
> + struct an8855_priv *priv = container_of(pcs, struct an8855_priv, pcs);
> +
> + regmap_set_bits(priv->regmap, AN8855_SGMII_REG_AN0,
> + AN8855_SGMII_AN_RESTART);
Again, looks like a standard PHY BMCR.
I haven't done a full review, but these are just what I've spotted so
far.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support
2024-10-21 13:36 ` [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support Vladimir Oltean
2024-10-21 13:39 ` Christian Marangi
@ 2024-10-21 14:11 ` Russell King (Oracle)
1 sibling, 0 replies; 11+ messages in thread
From: Russell King (Oracle) @ 2024-10-21 14:11 UTC (permalink / raw)
To: Vladimir Oltean
Cc: Christian Marangi, Arınç ÜNAL, Daniel Golle,
DENG Qingfang, Sean Wang, Andrew Lunn, Florian Fainelli,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Heiner Kallweit,
Matthias Brugger, AngeloGioacchino Del Regno, linux-arm-kernel,
linux-mediatek, netdev, devicetree, linux-kernel
On Mon, Oct 21, 2024 at 04:36:05PM +0300, Vladimir Oltean wrote:
> On Mon, Oct 21, 2024 at 03:01:55PM +0200, Christian Marangi wrote:
> > It's conceptually similar to mediatek switch but register and bits
> > are different.
>
> Is it impractical to use struct regmap_field to abstract those
> differences away and reuse the mt7530 driver's control flow? What is the
> relationship between the Airoha and Mediatek IP anyway? The mt7530
> maintainers should also be consulted w.r.t. whether code sharing is in
> the common interest (I copied them).
That thought crossed my mind while reviewing patch 3. I compared the
PMCR and PMSR, a lot of the bits are in completely different places
between the two. I didn't check further, but I got the feeling that
would invite more complexity.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [net-next RFC PATCH 3/4] net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver
2024-10-21 14:08 ` Russell King (Oracle)
@ 2024-10-21 14:39 ` Christian Marangi
0 siblings, 0 replies; 11+ messages in thread
From: Christian Marangi @ 2024-10-21 14:39 UTC (permalink / raw)
To: Russell King (Oracle)
Cc: Andrew Lunn, Florian Fainelli, Vladimir Oltean, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Heiner Kallweit,
Matthias Brugger, AngeloGioacchino Del Regno, linux-arm-kernel,
linux-mediatek, netdev, devicetree, linux-kernel
On Mon, Oct 21, 2024 at 03:08:24PM +0100, Russell King (Oracle) wrote:
> On Mon, Oct 21, 2024 at 03:01:58PM +0200, Christian Marangi wrote:
> > +static int an8855_mii_read32(struct mii_bus *bus, u8 phy_id, u32 reg, u32 *val)
> > +{
> > + u16 lo, hi;
> > + int ret;
> > +
> > + ret = bus->write(bus, phy_id, 0x1f, 0x4);
> > + ret = bus->write(bus, phy_id, 0x10, 0);
> > +
> > + ret = bus->write(bus, phy_id, 0x15, ((reg >> 16) & 0xFFFF));
>
> These assignments above are useless on their own. What if one of them
> fails?
>
> Please also consider __mdiobus_write() and __mdiobus_read() which will
> check that the bus lock is held, and also give the ability to trace
> the bus activity.
>
> > + ret = bus->write(bus, phy_id, 0x16, (reg & 0xFFFF));
> > + if (ret < 0) {
> > + dev_err_ratelimited(&bus->dev,
> > + "failed to read an8855 register\n");
> > + return ret;
> > + }
> > +
> > + lo = bus->read(bus, phy_id, 0x18);
> > + hi = bus->read(bus, phy_id, 0x17);
>
> What if one of these fails, and the negative value gets clamped to a
> u16?
>
> > +
> > + ret = bus->write(bus, phy_id, 0x1f, 0);
> > + if (ret < 0) {
> > + dev_err_ratelimited(&bus->dev,
> > + "failed to read an8855 register\n");
> > + return ret;
> > + }
> > +
> > + *val = (hi << 16) | (lo & 0xffff);
> > +
> > + return 0;
> > +}
> > +
> > +static int an8855_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
> > +{
> > + struct an8855_priv *priv = ctx;
> > + struct mii_bus *bus = priv->bus;
> > + int ret;
> > +
> > + scoped_guard(mdio_mutex_nested, &bus->mdio_lock)
> > + ret = an8855_mii_read32(bus, priv->phy_base,
> > + reg, val);
>
> I'm really not a fan of these non-C like code structures that make the
> code harder to review, and can add (and already have resulted in) bugs,
> but everyone to their own. Al Viro found a whole new class of bug caused
> by these magic things. I'd much prefer explicit C code that can be read
> and reviewed over "let the compiler do magic" stuff.
>
Eh I hoped some of the cleanup API could be used... I received some
request to start using it. I will drop them entirely ok.
> > +
> > + return ret < 0 ? ret : 0;
> > +}
> > +
> > +static int an8855_mii_write32(struct mii_bus *bus, u8 phy_id, u32 reg, u32 val)
> > +{
> > + int ret;
> > +
> > + ret = bus->write(bus, phy_id, 0x1f, 0x4);
> > + ret = bus->write(bus, phy_id, 0x10, 0);
> > +
> > + ret = bus->write(bus, phy_id, 0x11, ((reg >> 16) & 0xFFFF));
> > + ret = bus->write(bus, phy_id, 0x12, (reg & 0xFFFF));
> > +
> > + ret = bus->write(bus, phy_id, 0x13, ((val >> 16) & 0xFFFF));
> > + ret = bus->write(bus, phy_id, 0x14, (val & 0xFFFF));
>
> Same as above.
>
> > +
> > + ret = bus->write(bus, phy_id, 0x1f, 0);
> > + if (ret < 0)
> > + dev_err_ratelimited(&bus->dev,
> > + "failed to write an8855 register\n");
> > +
> > + return 0;
> > +}
>
> ...
>
> > +static int an8855_set_mac_eee(struct dsa_switch *ds, int port,
> > + struct ethtool_keee *eee)
> > +{
> > + struct an8855_priv *priv = ds->priv;
> > + u32 reg;
> > + int ret;
> > +
> > + if (eee->eee_enabled) {
> > + ret = regmap_read(priv->regmap, AN8855_PMCR_P(port), ®);
> > + if (ret)
> > + return ret;
> > + if (reg & AN8855_PMCR_FORCE_MODE) {
> > + switch (reg & AN8855_PMCR_FORCE_SPEED) {
> > + case AN8855_PMCR_FORCE_SPEED_1000:
> > + reg |= AN8855_PMCR_FORCE_EEE1G;
> > + break;
> > + case AN8855_PMCR_FORCE_SPEED_100:
> > + reg |= AN8855_PMCR_FORCE_EEE100;
> > + break;
> > + default:
> > + break;
> > + }
> > + ret = regmap_write(priv->regmap, AN8855_PMCR_P(port), reg);
> > + if (ret)
> > + return ret;
>
> What logic are you trying to implement here? It looks like you're
> forcing EEE to be enabled here if AN8855_PMCR_FORCE_MODE was set, which,
> reading the code in link_{up,down} it always will be when the link
> happens to be down when the user configures EEE. This makes no sense.
>
> EEE is supposed to be enabled as a result of the PHY's negotiation with
> the link partner. There shouldn't be any forcing.
>
> > + }
> > + if (eee->tx_lpi_enabled) {
> > + ret = regmap_set_bits(priv->regmap, AN8855_PMEEECR_P(port),
> > + AN8855_LPI_MODE_EN);
> > + if (ret)
> > + return ret;
> > + } else {
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PMEEECR_P(port),
> > + AN8855_LPI_MODE_EN);
> > + if (ret)
> > + return ret;
> > + }
>
> Maybe:
>
> ret = regmap_update_bits(priv->regmap, AN8855_PMEEECR_P(port),
> AN8855_LPI_MODE_EN,
> eee->tx_lpi_enabled ?
> AN8855_LPI_MODE_EN : 0);
> if (ret)
> return ret;
>
> > + } else {
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PMCR_P(port),
> > + AN8855_PMCR_FORCE_EEE1G |
> > + AN8855_PMCR_FORCE_EEE100);
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PMEEECR_P(port),
> > + AN8855_LPI_MODE_EN);
> > + if (ret)
> > + return ret;
>
> This probably needs to interact with the link up/down state.
>
> Really, I need to find the time to sort out adding EEE stuff to phylink
> that is keyed from phylib's implementation, but not at the moment.
>
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int an8855_get_mac_eee(struct dsa_switch *ds, int port,
> > + struct ethtool_keee *eee)
> > +{
> > + struct an8855_priv *priv = ds->priv;
> > + u32 reg;
> > + int ret;
> > +
> > + ret = regmap_read(priv->regmap, AN8855_PMEEECR_P(port), ®);
> > + if (ret)
> > + return ret;
> > + eee->tx_lpi_enabled = reg & AN8855_LPI_MODE_EN;
>
> This is fine, the MAC is responsible for LPI transmission.
>
> > +
> > + ret = regmap_read(priv->regmap, AN8855_CKGCR, ®);
> > + if (ret)
> > + return ret;
> > + /* Global LPI TXIDLE Threshold, default 60ms (unit 2us) */
> > + eee->tx_lpi_timer = FIELD_GET(AN8855_LPI_TXIDLE_THD_MASK, reg) / 500;
>
> Also fine.
>
> > +
> > + ret = regmap_read(priv->regmap, AN8855_PMSR_P(port), ®);
> > + if (ret)
> > + return ret;
> > + eee->eee_active = reg & (AN8855_PMSR_EEE1G | AN8855_PMSR_EEE100M);
>
> This isn't. You're overwriting the value set by
> genphy_c45_ethtool_get_eee(), which has already determined whether
> EEE is active from the PHY's negotiation state, and this is what
> eee_active is supposed to indicate.
>
> > +
> > + return 0;
> > +}
> > +
> > +static u32 en8855_get_phy_flags(struct dsa_switch *ds, int port)
> > +{
> > + struct an8855_priv *priv = ds->priv;
> > + u8 calibration_data[4] = { };
> > + u8 shift_sel;
> > + u32 val;
> > + int ret;
> > + int i;
> > +
> > + /* PHY doesn't need calibration */
> > + if (!priv->phy_require_calib)
> > + return 0;
> > +
> > + /* Read Calibration value */
> > + for (i = 0; i < sizeof(u32); i++) {
> > + ret = regmap_read(priv->regmap, AN8855_EFUSE_DATA0 +
> > + ((3 + i + (4 * port)) * 4), &val);
> > + if (ret)
> > + return 0;
> > +
> > + shift_sel = FIELD_GET(AN8855_EFUSE_R50O, val);
> > + calibration_data[i] = en8855_get_r50ohm_val(shift_sel);
> > + }
> > +
> > + memcpy(&val, calibration_data, sizeof(u32));
> > + return val;
>
> Ewwwwwww.
>
> So you're reading from fuses, and then passing them as phy flags.
> PHY flags are no longer 100% available for whatever you want to use
> them for - some have standard meanings:
>
Yep this is the main reason of RFC... Any hint on how to handle this?
Actually the Switch have some special regs to access the PHY indirectly
so maybe I can do the calibration from the switch but I would really
love to find a way to pass these kind of data and handle them entirely
in the PHY driver code.
The first solution that comes to mind is shared global header in
include/linux/dsa and implement some kind of OPs or additional entry in
struct phy to declare a pointer and the size of it? Or with the global
header a struct directly? But this would be very special and just for
these case of internal PHY.
> * - Bits [15:0] are free to use by the PHY driver to communicate
> * driver specific behavior.
> * - Bits [23:16] are currently reserved for future use.
> * - Bits [31:24] are reserved for defining generic
> * PHY driver behavior.
>
> For example, PHY_F_NO_IRQ and PHY_F_RXC_ALWAYS_ON are already allocated
> in the top 8 bits.
>
I checked the DSA code and hoped I could use the full register.
> > +static void
> > +an8855_phylink_mac_config(struct phylink_config *config, unsigned int mode,
> > + const struct phylink_link_state *state)
> > +{
> > + struct dsa_port *dp = dsa_phylink_to_port(config);
> > + struct dsa_switch *ds = dp->ds;
> > + struct an8855_priv *priv;
> > + int port = dp->index;
> > +
> > + priv = ds->priv;
> > +
> > + switch (port) {
> > + case 0:
> > + case 1:
> > + case 2:
> > + case 3:
> > + case 4:
> > + return;
> > + case 5:
> > + break;
> > + default:
> > + dev_err(ds->dev, "unsupported port: %d", port);
> > + return;
> > + }
> > +
> > + if (state->interface == PHY_INTERFACE_MODE_2500BASEX &&
> > + phylink_autoneg_inband(mode))
> > + dev_err(ds->dev, "in-band negotiation unsupported");
>
> Please check this in the PCS code.
>
> > +
> > + regmap_update_bits(priv->regmap, AN8855_PMCR_P(port),
> > + AN8855_PMCR_IFG_XMIT | AN8855_PMCR_MAC_MODE |
> > + AN8855_PMCR_BACKOFF_EN | AN8855_PMCR_BACKPR_EN,
> > + FIELD_PREP(AN8855_PMCR_IFG_XMIT, 0x1) |
> > + AN8855_PMCR_MAC_MODE | AN8855_PMCR_BACKOFF_EN |
> > + AN8855_PMCR_BACKPR_EN);
> > +}
> > +
> > +static void an8855_phylink_get_caps(struct dsa_switch *ds, int port,
> > + struct phylink_config *config)
> > +{
> > + switch (port) {
> > + case 0:
> > + case 1:
> > + case 2:
> > + case 3:
> > + case 4:
> > + __set_bit(PHY_INTERFACE_MODE_GMII,
> > + config->supported_interfaces);
> > + __set_bit(PHY_INTERFACE_MODE_INTERNAL,
> > + config->supported_interfaces);
> > + break;
> > + case 5:
> > + phy_interface_set_rgmii(config->supported_interfaces);
> > + __set_bit(PHY_INTERFACE_MODE_SGMII,
> > + config->supported_interfaces);
> > + __set_bit(PHY_INTERFACE_MODE_2500BASEX,
> > + config->supported_interfaces);
> > + break;
> > + }
> > +
> > + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
> > + MAC_10 | MAC_100 | MAC_1000FD;
> > +}
> > +
> > +static void
> > +an8855_phylink_mac_link_down(struct phylink_config *config, unsigned int mode,
> > + phy_interface_t interface)
> > +{
> > + struct dsa_port *dp = dsa_phylink_to_port(config);
> > + struct an8855_priv *priv = dp->ds->priv;
> > +
> > + /* Disable TX/RX, force link down */
> > + regmap_update_bits(priv->regmap, AN8855_PMCR_P(dp->index),
> > + AN8855_PMCR_TX_EN | AN8855_PMCR_RX_EN |
> > + AN8855_PMCR_FORCE_MODE | AN8855_PMCR_FORCE_LNK,
> > + AN8855_PMCR_FORCE_MODE);
>
> Does forcing the link down prevent the AN8855_PMSR_LNK bit being set?
> If not, please document that here because the current code goes against
> what's documented in phylink:
>
> * If @mode is not an in-band negotiation mode (as defined by
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> * phylink_autoneg_inband()), force the link down and disable any
> * Energy Efficient Ethernet MAC configuration. ...
>
Mhhh the force bit just "force" the configutation, AKA it does set the
link down. We can keep the link up and just disable TX and RX.
In the current code, I enable force bit, and clear the LINK bit if it
was set prev and disable TX and RX.
Soo with the comments, with autoneg I should just disable TX and RX
correct?
> > +}
> > +
> > +static void
> > +an8855_phylink_mac_link_up(struct phylink_config *config,
> > + struct phy_device *phydev, unsigned int mode,
> > + phy_interface_t interface, int speed, int duplex,
> > + bool tx_pause, bool rx_pause)
> > +{
> > + struct dsa_port *dp = dsa_phylink_to_port(config);
> > + struct an8855_priv *priv = dp->ds->priv;
> > + int port = dp->index;
> > + u32 reg;
> > +
> > + reg = regmap_read(priv->regmap, AN8855_PMCR_P(port), ®);
> > + if (phylink_autoneg_inband(mode)) {
> > + reg &= ~AN8855_PMCR_FORCE_MODE;
> > + } else {
> > + reg |= AN8855_PMCR_FORCE_MODE | AN8855_PMCR_FORCE_LNK;
> > +
> > + reg &= ~AN8855_PMCR_FORCE_SPEED;
> > + switch (speed) {
> > + case SPEED_10:
> > + reg |= AN8855_PMCR_FORCE_SPEED_10;
> > + break;
> > + case SPEED_100:
> > + reg |= AN8855_PMCR_FORCE_SPEED_100;
> > + break;
> > + case SPEED_1000:
> > + reg |= AN8855_PMCR_FORCE_SPEED_1000;
> > + break;
> > + case SPEED_2500:
> > + reg |= AN8855_PMCR_FORCE_SPEED_2500;
> > + break;
> > + case SPEED_5000:
> > + reg |= AN8855_PMCR_FORCE_SPEED_5000;
> > + break;
> > + }
> > +
> > + reg &= AN8855_PMCR_FORCE_FDX;
> > + if (duplex == DUPLEX_FULL)
> > + reg |= AN8855_PMCR_FORCE_FDX;
> > +
> > + reg &= AN8855_PMCR_RX_FC_EN;
> > + if (rx_pause || dsa_port_is_cpu(dp))
> > + reg |= AN8855_PMCR_RX_FC_EN;
> > +
> > + reg &= AN8855_PMCR_TX_FC_EN;
> > + if (rx_pause || dsa_port_is_cpu(dp))
> > + reg |= AN8855_PMCR_TX_FC_EN;
> > +
> > + /* Disable any EEE options */
> > + reg &= ~(AN8855_PMCR_FORCE_EEE5G | AN8855_PMCR_FORCE_EEE2P5G |
> > + AN8855_PMCR_FORCE_EEE1G | AN8855_PMCR_FORCE_EEE100);
> > + }
> > +
> > + reg |= AN8855_PMCR_TX_EN | AN8855_PMCR_RX_EN;
> > +
> > + regmap_write(priv->regmap, AN8855_PMCR_P(port), reg);
> > +}
> > +
> > +static void an8855_pcs_get_state(struct phylink_pcs *pcs,
> > + struct phylink_link_state *state)
> > +{
> > + struct an8855_priv *priv = container_of(pcs, struct an8855_priv, pcs);
> > + u32 val;
> > + int ret;
> > +
> > + ret = regmap_read(priv->regmap, AN8855_PMSR_P(AN8855_CPU_PORT), &val);
> > + if (ret < 0) {
> > + state->link = false;
> > + return;
> > + }
> > +
> > + state->link = !!(val & AN8855_PMSR_LNK);
> > + state->an_complete = state->link;
> > + state->duplex = (val & AN8855_PMSR_DPX) ? DUPLEX_FULL :
> > + DUPLEX_HALF;
> > +
> > + switch (val & AN8855_PMSR_SPEED) {
> > + case AN8855_PMSR_SPEED_10:
> > + state->speed = SPEED_10;
> > + break;
> > + case AN8855_PMSR_SPEED_100:
> > + state->speed = SPEED_100;
> > + break;
> > + case AN8855_PMSR_SPEED_1000:
> > + state->speed = SPEED_1000;
> > + break;
> > + case AN8855_PMSR_SPEED_2500:
> > + state->speed = SPEED_2500;
> > + break;
> > + case AN8855_PMSR_SPEED_5000:
> > + state->speed = SPEED_5000;
> > + break;
> > + default:
> > + state->speed = SPEED_UNKNOWN;
> > + break;
> > + }
> > +
> > + if (val & AN8855_PMSR_RX_FC)
> > + state->pause |= MLO_PAUSE_RX;
> > + if (val & AN8855_PMSR_TX_FC)
> > + state->pause |= MLO_PAUSE_TX;
> > +}
> > +
> > +static int an8855_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
> > + phy_interface_t interface,
> > + const unsigned long *advertising,
> > + bool permit_pause_to_mac)
> > +{
> > + struct an8855_priv *priv = container_of(pcs, struct an8855_priv, pcs);
> > + u32 val;
> > + int ret;
> > +
> > + switch (interface) {
> > + case PHY_INTERFACE_MODE_RGMII:
> > + return 0;
> > + case PHY_INTERFACE_MODE_SGMII:
> > + break;
> > + case PHY_INTERFACE_MODE_2500BASEX:
> > + if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
> > + return -EINVAL;
> > +
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + /* !!! WELCOME TO HELL !!! */
> > +
> > + /* TX FIR - improve TX EYE */
> > + ret = regmap_update_bits(priv->regmap, AN8855_INTF_CTRL_10, GENMASK(21, 16),
> > + FIELD_PREP(GENMASK(21, 16), 0x20));
> > + if (ret)
> > + return ret;
> > + ret = regmap_update_bits(priv->regmap, AN8855_INTF_CTRL_10, GENMASK(28, 24),
> > + FIELD_PREP(GENMASK(28, 24), 0x4));
> > + if (ret)
> > + return ret;
> > + ret = regmap_set_bits(priv->regmap, AN8855_INTF_CTRL_10, BIT(29));
> > + if (ret)
> > + return ret;
> > +
> > + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> > + val = 0x0;
> > + else
> > + val = 0xd;
> > + ret = regmap_update_bits(priv->regmap, AN8855_INTF_CTRL_11, GENMASK(5, 0),
> > + FIELD_PREP(GENMASK(5, 0), val));
> > + if (ret)
> > + return ret;
> > + ret = regmap_set_bits(priv->regmap, AN8855_INTF_CTRL_11, BIT(6));
> > + if (ret)
> > + return ret;
> > +
> > + /* RX CDR - improve RX Jitter Tolerance */
> > + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> > + val = 0x5;
> > + else
> > + val = 0x6;
> > + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_BOT_LIM, GENMASK(26, 24),
> > + FIELD_PREP(GENMASK(26, 24), val));
> > + if (ret)
> > + return ret;
> > + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_BOT_LIM, GENMASK(22, 20),
> > + FIELD_PREP(GENMASK(22, 20), val));
> > + if (ret)
> > + return ret;
> > +
> > + /* PLL */
> > + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> > + val = 0x1;
> > + else
> > + val = 0x0;
> > + ret = regmap_update_bits(priv->regmap, AN8855_QP_DIG_MODE_CTRL_1, GENMASK(3, 2),
> > + FIELD_PREP(GENMASK(3, 2), val));
> > + if (ret)
> > + return ret;
> > +
> > + /* PLL - LPF */
> > + ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(1, 0),
> > + FIELD_PREP(GENMASK(1, 0), 0x1));
> > + if (ret)
> > + return ret;
> > + ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(4, 2),
> > + FIELD_PREP(GENMASK(4, 2), 0x5));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(6) | BIT(7));
> > + if (ret)
> > + return ret;
> > + ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(10, 8),
> > + FIELD_PREP(GENMASK(10, 8), 0x3));
> > + if (ret)
> > + return ret;
> > + ret = regmap_set_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(29));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(12) | BIT(13));
> > + if (ret)
> > + return ret;
> > +
> > + /* PLL - ICO */
> > + ret = regmap_set_bits(priv->regmap, AN8855_PLL_CTRL_4, BIT(2));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(14));
> > + if (ret)
> > + return ret;
> > +
> > + /* PLL - CHP */
> > + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> > + val = 0x6;
> > + else
> > + val = 0x4;
> > + ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(19, 16),
> > + FIELD_PREP(GENMASK(19, 16), val));
> > + if (ret)
> > + return ret;
> > +
> > + /* PLL - PFD */
> > + ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(21, 20),
> > + FIELD_PREP(GENMASK(21, 20), 0x1));
> > + if (ret)
> > + return ret;
> > + ret = regmap_update_bits(priv->regmap, AN8855_PLL_CTRL_2, GENMASK(25, 24),
> > + FIELD_PREP(GENMASK(25, 24), 0x1));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(26));
> > + if (ret)
> > + return ret;
> > +
> > + /* PLL - POSTDIV */
> > + ret = regmap_set_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(22));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(27));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(28));
> > + if (ret)
> > + return ret;
> > +
> > + /* PLL - SDM */
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_4, BIT(3) | BIT(4));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_2, BIT(30));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_SS_LCPLL_PWCTL_SETTING_2,
> > + GENMASK(17, 16),
> > + FIELD_PREP(GENMASK(17, 16), 0x1));
> > + if (ret)
> > + return ret;
> > +
> > + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> > + val = 0x7a000000;
> > + else
> > + val = 0x48000000;
> > + ret = regmap_write(priv->regmap, AN8855_SS_LCPLL_TDC_FLT_2, val);
> > + if (ret)
> > + return ret;
> > + ret = regmap_write(priv->regmap, AN8855_SS_LCPLL_TDC_PCW_1, val);
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_clear_bits(priv->regmap, AN8855_SS_LCPLL_TDC_FLT_5, BIT(24));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CK_CTRL_0, BIT(8));
> > + if (ret)
> > + return ret;
> > +
> > + /* PLL - SS */
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_3, GENMASK(15, 0));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_4, GENMASK(1, 0));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CTRL_3, GENMASK(31, 16));
> > + if (ret)
> > + return ret;
> > +
> > + /* PLL - TDC */
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PLL_CK_CTRL_0, BIT(9));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_set_bits(priv->regmap, AN8855_RG_QP_PLL_SDM_ORD, BIT(3));
> > + if (ret)
> > + return ret;
> > + ret = regmap_set_bits(priv->regmap, AN8855_RG_QP_PLL_SDM_ORD, BIT(4));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_RX_DAC_EN, GENMASK(17, 16),
> > + FIELD_PREP(GENMASK(17, 16), 0x2));
> > + if (ret)
> > + return ret;
> > +
> > + /* TCL Disable (only for Co-SIM) */
> > + ret = regmap_clear_bits(priv->regmap, AN8855_PON_RXFEDIG_CTRL_0, BIT(12));
> > + if (ret)
> > + return ret;
> > +
> > + /* TX Init */
> > + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> > + val = 0x4;
> > + else
> > + val = 0x0;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_RG_QP_TX_MODE_16B_EN, BIT(0));
> > + if (ret)
> > + return ret;
> > + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_TX_MODE_16B_EN,
> > + GENMASK(31, 16),
> > + FIELD_PREP(GENMASK(31, 16), val));
> > + if (ret)
> > + return ret;
> > +
> > + /* RX Control/Init */
> > + ret = regmap_set_bits(priv->regmap, AN8855_RG_QP_RXAFE_RESERVE, BIT(11));
> > + if (ret)
> > + return ret;
> > +
> > + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> > + val = 0x1;
> > + else
> > + val = 0x2;
> > + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_MJV_LIM,
> > + GENMASK(5, 4),
> > + FIELD_PREP(GENMASK(5, 4), val));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_SETVALUE,
> > + GENMASK(28, 25),
> > + FIELD_PREP(GENMASK(28, 25), 0x1));
> > + if (ret)
> > + return ret;
> > + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_LPF_SETVALUE,
> > + GENMASK(31, 29),
> > + FIELD_PREP(GENMASK(31, 29), 0x6));
> > + if (ret)
> > + return ret;
> > +
> > + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> > + val = 0xf;
> > + else
> > + val = 0xc;
> > + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_PR_CKREF_DIV1,
> > + GENMASK(12, 8),
> > + FIELD_PREP(GENMASK(12, 8), val));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_PR_KBAND_DIV_PCIE,
> > + GENMASK(12, 8),
> > + FIELD_PREP(GENMASK(12, 8), 0x19));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_RG_QP_CDR_PR_KBAND_DIV_PCIE, BIT(6));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_FORCE_IBANDLPF_R_OFF,
> > + GENMASK(12, 6),
> > + FIELD_PREP(GENMASK(12, 6), 0x21));
> > + if (ret)
> > + return ret;
> > + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_FORCE_IBANDLPF_R_OFF,
> > + GENMASK(17, 16),
> > + FIELD_PREP(GENMASK(17, 16), 0x2));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_RG_QP_CDR_FORCE_IBANDLPF_R_OFF, BIT(13));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_clear_bits(priv->regmap, AN8855_RG_QP_CDR_PR_KBAND_DIV_PCIE, BIT(30));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_RG_QP_CDR_PR_CKREF_DIV1,
> > + GENMASK(26, 24),
> > + FIELD_PREP(GENMASK(26, 24), 0x4));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_set_bits(priv->regmap, AN8855_RX_CTRL_26, BIT(23));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_RX_CTRL_26, BIT(24));
> > + if (ret)
> > + return ret;
> > + ret = regmap_set_bits(priv->regmap, AN8855_RX_CTRL_26, BIT(26));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_RX_DLY_0, GENMASK(7, 0),
> > + FIELD_PREP(GENMASK(7, 0), 0x6f));
> > + if (ret)
> > + return ret;
> > + ret = regmap_set_bits(priv->regmap, AN8855_RX_DLY_0, GENMASK(13, 8));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_42, GENMASK(12, 0),
> > + FIELD_PREP(GENMASK(12, 0), 0x150));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_2, GENMASK(28, 16),
> > + FIELD_PREP(GENMASK(28, 16), 0x150));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_PON_RXFEDIG_CTRL_9,
> > + GENMASK(2, 0),
> > + FIELD_PREP(GENMASK(2, 0), 0x1));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_8, GENMASK(27, 16),
> > + FIELD_PREP(GENMASK(27, 16), 0x200));
> > + if (ret)
> > + return ret;
> > + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_8, GENMASK(14, 0),
> > + FIELD_PREP(GENMASK(14, 0), 0xfff));
> > + if (ret)
> > + return ret;
> > +
> > + /* Frequency meter */
> > + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> > + val = 0x10;
> > + else
> > + val = 0x28;
> > + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_5, GENMASK(29, 10),
> > + FIELD_PREP(GENMASK(29, 10), val));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_6, GENMASK(19, 0),
> > + FIELD_PREP(GENMASK(19, 0), 0x64));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_RX_CTRL_7, GENMASK(19, 0),
> > + FIELD_PREP(GENMASK(19, 0), 0x2710));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_set_bits(priv->regmap, AN8855_PLL_CTRL_0, BIT(0));
> > + if (ret)
> > + return ret;
> > +
> > + /* PCS Init */
> > + if (interface == PHY_INTERFACE_MODE_SGMII &&
> > + neg_mode == PHYLINK_PCS_NEG_INBAND_DISABLED) {
> > + ret = regmap_clear_bits(priv->regmap, AN8855_QP_DIG_MODE_CTRL_0,
> > + BIT(0));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_QP_DIG_MODE_CTRL_0,
> > + GENMASK(5, 4));
> > + if (ret)
> > + return ret;
>
> Do these really need to be done separately, or can the two be combined?
>
> ret = regmap_clear_bits(priv->regmap, AN8855_QP_DIG_MODE_CTRL_0,
> GENMASK(5, 4) | BIT(0));
>
> ?
I decided to separate them as much as possible following the pattern
used in SDK to make this mess more readable. If needed yes I can combine
the 2.
>
> > + }
> > +
> > + ret = regmap_clear_bits(priv->regmap, AN8855_RG_HSGMII_PCS_CTROL_1, BIT(30));
> > + if (ret)
> > + return ret;
> > +
> > + if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
> > + /* Set AN Ability - Interrupt */
> > + ret = regmap_set_bits(priv->regmap, AN8855_SGMII_REG_AN_FORCE_CL37, BIT(0));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_update_bits(priv->regmap, AN8855_SGMII_REG_AN_13,
> > + GENMASK(5, 0),
> > + FIELD_PREP(GENMASK(5, 0), 0xb));
> > + if (ret)
> > + return ret;
> > + ret = regmap_set_bits(priv->regmap, AN8855_SGMII_REG_AN_13, BIT(8));
> > + if (ret)
> > + return ret;
> > + }
>
> Eh?
>
> > +
> > + /* Rate Adaption - GMII path config. */
> > + if (interface == PHY_INTERFACE_MODE_2500BASEX) {
> > + ret = regmap_clear_bits(priv->regmap, AN8855_RATE_ADP_P0_CTRL_0, BIT(31));
> > + if (ret)
> > + return ret;
> > + } else {
> > + if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
> > + ret = regmap_set_bits(priv->regmap, AN8855_MII_RA_AN_ENABLE, BIT(0));
> > + if (ret)
> > + return ret;
> > + } else {
> > + ret = regmap_set_bits(priv->regmap, AN8855_RG_AN_SGMII_MODE_FORCE,
> > + BIT(0));
> > + if (ret)
> > + return ret;
> > + ret = regmap_clear_bits(priv->regmap, AN8855_RG_AN_SGMII_MODE_FORCE,
> > + GENMASK(5, 4));
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_clear_bits(priv->regmap, AN8855_RATE_ADP_P0_CTRL_0,
> > + GENMASK(3, 0));
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + ret = regmap_set_bits(priv->regmap, AN8855_RATE_ADP_P0_CTRL_0, BIT(28));
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + ret = regmap_set_bits(priv->regmap, AN8855_RG_RATE_ADAPT_CTRL_0, BIT(0));
> > + if (ret)
> > + return ret;
> > + ret = regmap_set_bits(priv->regmap, AN8855_RG_RATE_ADAPT_CTRL_0, BIT(4));
> > + if (ret)
> > + return ret;
> > + ret = regmap_set_bits(priv->regmap, AN8855_RG_RATE_ADAPT_CTRL_0, GENMASK(27, 26));
> > + if (ret)
> > + return ret;
> > +
> > + /* Disable AN */
> > + if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
> > + ret = regmap_set_bits(priv->regmap, AN8855_SGMII_REG_AN0,
> > + AN8855_SGMII_AN_ENABLE);
> > + if (ret)
> > + return ret;
> > + } else {
> > + ret = regmap_clear_bits(priv->regmap, AN8855_SGMII_REG_AN0,
> > + AN8855_SGMII_AN_ENABLE);
> > + if (ret)
> > + return ret;
> > + }
>
> Again, using regmap_update_bits() with a mask and value is probably more
> readable here. This looks like it's twiddling a standard BMCR_ANENABLE
> bit.
>
Looks like so... the 2 bit are the same... (btw these are the ONLY bits
I have in documentation...)
> > +
> > + if (interface == PHY_INTERFACE_MODE_SGMII &&
> > + neg_mode == PHYLINK_PCS_NEG_INBAND_DISABLED) {
> > + ret = regmap_set_bits(priv->regmap, AN8855_PHY_RX_FORCE_CTRL_0, BIT(4));
> > + if (ret)
> > + return ret;
> > + }
>
> Eh?
>
> > +
> > + /* Force Speed */
> > + if (interface == PHY_INTERFACE_MODE_2500BASEX ||
> > + neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
> > + if (interface == PHY_INTERFACE_MODE_2500BASEX)
> > + val = 0x3;
> > + else
> > + val = 0x2;
> > + ret = regmap_set_bits(priv->regmap, AN8855_SGMII_STS_CTRL_0, BIT(2));
> > + if (ret)
> > + return ret;
> > + ret = regmap_update_bits(priv->regmap, AN8855_SGMII_STS_CTRL_0,
> > + GENMASK(5, 4),
> > + FIELD_PREP(GENMASK(5, 4), val));
> > + if (ret)
> > + return ret;
> > + }
>
> I don't understand why speed should be forced if inband is enabled or
> we're using 2500base-X.
>
Again no documentation. From my test with the value set to 0 CPU port
can't send traffic.
I assume this is some kind of max speed value.
3 2500
2 1000
1 100
0 10
Maybe?
> > +
> > + /* bypass flow control to MAC */
> > + ret = regmap_write(priv->regmap, AN8855_MSG_RX_LIK_STS_0, 0x01010107);
> > + if (ret)
> > + return ret;
> > + ret = regmap_write(priv->regmap, AN8855_MSG_RX_LIK_STS_2, 0x00000EEF);
> > + if (ret)
> > + return ret;
>
> Overall, I'd like more comments about what stuff is doing, especially
> the AN stuff. I can't make head nor tail of e.g. is there any
> advertisement being programmed or not.
>
> Also, given that this will be called _on its own_ if the user requests
> the inband advertisement to be changed, we don't want to unnecessarily
> disrupt the link. What would happen if this code runs when the link is
> up?
I will try to gather more info about all of these configuration but
honestly chance are very low...
From what I observed these values doesn't interrupt the link but maybe
this code can be moved in different OPs to better handle changing case?
>
> > +
> > + return 0;
> > +}
> > +
> > +static void an8855_pcs_an_restart(struct phylink_pcs *pcs)
> > +{
> > + struct an8855_priv *priv = container_of(pcs, struct an8855_priv, pcs);
> > +
> > + regmap_set_bits(priv->regmap, AN8855_SGMII_REG_AN0,
> > + AN8855_SGMII_AN_RESTART);
>
> Again, looks like a standard PHY BMCR.
>
> I haven't done a full review, but these are just what I've spotted so
> far.
>
Thanks a lot for the initial review, I will check the EEE part better.
Again the big problem is the PCS setup with all that nightmares
values... The Documentation is empty (only AN value are there) and the
values from the SDK by compacting the sgmii(inband and forced)/hsgmii in
one single code by checking all the common piece.
This if why you have all those if condition and all... They comes from
compacting the functions, that part of code is still a blackbox more or
less currently...
--
Ansuel
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2024-10-21 14:39 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-10-21 13:01 [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support Christian Marangi
2024-10-21 13:01 ` [net-next RFC PATCH 1/4] net: mdio: implement mdio_mutex_nested guard() variant Christian Marangi
2024-10-21 13:01 ` [net-next RFC PATCH 2/4] dt-bindings: net: dsa: Add Airoha AN8855 Gigabit Switch documentation Christian Marangi
2024-10-21 13:01 ` [net-next RFC PATCH 3/4] net: dsa: Add Airoha AN8855 5-Port Gigabit DSA Switch driver Christian Marangi
2024-10-21 14:08 ` Russell King (Oracle)
2024-10-21 14:39 ` Christian Marangi
2024-10-21 13:01 ` [net-next RFC PATCH 4/4] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY Christian Marangi
2024-10-21 13:36 ` [net-next RFC PATCH 0/4] net: dsa: Add Airoha AN8855 support Vladimir Oltean
2024-10-21 13:39 ` Christian Marangi
2024-10-21 13:50 ` Vladimir Oltean
2024-10-21 14:11 ` Russell King (Oracle)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).