From: Frank Li <Frank.Li@nxp.com>
To: shawnguo2@yeah.net
Cc: Frank.Li@nxp.com, conor+dt@kernel.org,
devicetree@vger.kernel.org, festevam@gmail.com,
imx@lists.linux.dev, kernel@pengutronix.de, krzk+dt@kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, robh@kernel.org,
s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: [PATCH v2 4/6] arm64: dts: imx8qxp-mek: add flexcan1 and flexcan2
Date: Mon, 21 Oct 2024 12:34:35 -0400 [thread overview]
Message-ID: <20241021163437.1007507-4-Frank.Li@nxp.com> (raw)
In-Reply-To: <20241021163437.1007507-1-Frank.Li@nxp.com>
Add flexcan1 and flexcan2.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change from v1 to v2
- none
---
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 47 +++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 0d14b0def19d4..e9342bf158489 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -57,6 +57,25 @@ reg_audio: regulator-audio {
regulator-name = "cs42888_supply";
};
+ reg_can_en: regulator-can-en {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "can-en";
+ gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can_stby: regulator-can-stby {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "can-stby";
+ gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can_en>;
+ };
+
sound-bt-sco {
compatible = "simple-audio-card";
simple-audio-card,bitclock-inversion;
@@ -337,6 +356,20 @@ &cm40_intmux {
status = "okay";
};
+&flexcan1 {
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ pinctrl-names = "default";
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ pinctrl-names = "default";
+ xceiver-supply = <®_can_stby>;
+ status = "okay";
+};
+
&jpegdec {
status = "okay";
};
@@ -567,6 +600,20 @@ IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020
>;
};
+ pinctrl_flexcan1: flexcan0grp {
+ fsl,pins = <
+ IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21
+ IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x21
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan1grp {
+ fsl,pins = <
+ IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x21
+ IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21
+ >;
+ };
+
pinctrl_ioexp_rst: ioexprstgrp {
fsl,pins = <
IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021
--
2.34.1
next prev parent reply other threads:[~2024-10-21 16:35 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-21 16:34 [PATCH v2 1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec Frank Li
2024-10-21 16:34 ` [PATCH v2 2/6] arm64: dts: imx8qxp-mek: add esai, cs42888 and related node Frank Li
2024-10-21 16:34 ` [PATCH v2 3/6] arm64: dts: imx8qxp-mek: enable jpeg encode and decode Frank Li
2024-10-22 17:16 ` Francesco Dolcini
2024-10-21 16:34 ` Frank Li [this message]
2024-10-21 16:34 ` [PATCH v2 5/6] arm64: dts: imx8qxp-mek: add usbotg1 and related node Frank Li
2024-10-21 16:34 ` [PATCH v2 6/6] arm64: dts: imx8qxp-mek: add cm4 and related nodes Frank Li
2024-10-22 7:40 ` [PATCH v2 1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec Shawn Guo
2024-10-24 16:33 ` Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241021163437.1007507-4-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo2@yeah.net \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox