devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: James Calligeros <jcalligeros99@gmail.com>
Cc: "Martin Povišer" <povik+lin@cutebit.org>,
	"David Rhodes" <david.rhodes@cirrus.com>,
	"Richard Fitzgerald" <rf@opensource.cirrus.com>,
	"Liam Girdwood" <lgirdwood@gmail.com>,
	"Mark Brown" <broonie@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Jaroslav Kysela" <perex@perex.cz>,
	"Takashi Iwai" <tiwai@suse.com>,
	asahi@lists.linux.dev, linux-sound@vger.kernel.org,
	patches@opensource.cirrus.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, "Hector Martin" <marcan@marcan.st>,
	"Neal Gompa" <neal@gompa.dev>
Subject: Re: [PATCH v2 1/3] dt-bindings: sound: Add CS42L84 codec
Date: Mon, 21 Oct 2024 14:26:32 -0500	[thread overview]
Message-ID: <20241021192632.GA965116-robh@kernel.org> (raw)
In-Reply-To: <20241020-cs42l84-v2-1-37ba2b6721d9@gmail.com>

On Sun, Oct 20, 2024 at 12:47:31AM +1000, James Calligeros wrote:
> From: Martin Povišer <povik+lin@cutebit.org>
> 
> CS42L84 is a headphone jack codec made by Cirrus Logic and seen in Apple
> computer models starting with 2021 Macbook Pros. It is not a publicly
> documented part. To a degree the part is similar to the public CS42L42.
> (The L84 superseded L83 seen in earlier Apple models, and the L83 was
> pretty much the same as L42.)

Why can't this be added to 
Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml?

I guess perhaps you don't know what the supplies look like? Do any of 
the custom properties apply?

> 
> Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
> Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
> Reviewed-by: Neal Gompa <neal@gompa.dev>
> ---
>  .../bindings/sound/cirrus,cs42l84.yaml   | 56 +++++++++++++++++++++++++
>  MAINTAINERS                              |  1 +
>  2 files changed, 57 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l84.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l84.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..7f8338e8ae369bc529ac3cf35041d5a7b9f3e6d1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l84.yaml
> @@ -0,0 +1,56 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/cirrus,cs42l84.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cirrus Logic CS42L84 audio CODEC
> +
> +maintainers:
> +  - Martin Povišer <povik+lin@cutebit.org>
> +
> +description: |

Don't need '|' if no formatting.

> +  The CS42L84 is a headphone jack codec made by Cirrus Logic and embedded
> +  in personal computers sold by Apple. It was first seen in 2021 Macbook
> +  Pro models. It has stereo DAC for playback, mono ADC for capture, and
> +  is somewhat similar to CS42L42 but with a different regmap.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - cirrus,cs42l84
> +
> +  reg:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  '#sound-dai-cells':
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      jack_codec: codec@4b {
> +          compatible = "cirrus,cs42l84";
> +          reg = <0x4b>;
> +          reset-gpios = <&pinctrl_nub 4 GPIO_ACTIVE_LOW>;
> +          interrupts-extended = <&pinctrl_ap 180 IRQ_TYPE_LEVEL_LOW>;
> +          #sound-dai-cells = <0>;
> +      };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c1a2c296446c0724a0c6e70c845e5e5e1e693fd5..f5f85714dc4e8ca9c60b3f6963b2cec1ea33fdd0 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2132,6 +2132,7 @@ L:	asahi@lists.linux.dev
>  L:	linux-sound@vger.kernel.org
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
> +F:	Documentation/devicetree/bindings/sound/cirrus,cs42l84.yaml
>  F:	Documentation/devicetree/bindings/sound/apple,*
>  F:	sound/soc/apple/*
>  F:	sound/soc/codecs/cs42l83-i2c.c
> 
> -- 
> 2.47.0
> 

  reply	other threads:[~2024-10-21 19:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-19 14:47 [PATCH v2 0/3] ASoC: add CS42L84 codec driver James Calligeros
2024-10-19 14:47 ` [PATCH v2 1/3] dt-bindings: sound: Add CS42L84 codec James Calligeros
2024-10-21 19:26   ` Rob Herring [this message]
2024-10-21 22:15     ` Mark Brown
2024-10-22  7:14       ` James Calligeros
2024-10-24 14:59   ` Rob Herring (Arm)
2024-10-24 15:09   ` Mark Brown
2024-10-19 14:47 ` [PATCH v2 2/3] ASoC: cs42l84: Add new codec driver James Calligeros
2024-10-19 14:47 ` [PATCH v2 3/3] ASoC: cs42l84: leverage ring sense IRQs to correctly detect headsets James Calligeros
2024-10-24 20:16 ` [PATCH v2 0/3] ASoC: add CS42L84 codec driver Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241021192632.GA965116-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=asahi@lists.linux.dev \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=david.rhodes@cirrus.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jcalligeros99@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=neal@gompa.dev \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=povik+lin@cutebit.org \
    --cc=rf@opensource.cirrus.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).