From: Lothar Rubusch <l.rubusch@gmail.com>
To: robh@kernel.org, krzk+dt@kernel.org, a.fatoum@pengutronix.de
Cc: conor+dt@kernel.org, dinguyen@kernel.org, marex@denx.de,
s.trumtrar@pengutronix.de, alexandre.torgue@foss.st.com,
joabreu@synopsys.com, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, mcoquelin.stm32@gmail.com,
netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org, l.rubusch@gmail.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 11/23] net: stmmac: add support for dwmac 3.72a
Date: Tue, 29 Oct 2024 20:23:37 +0000 [thread overview]
Message-ID: <20241029202349.69442-12-l.rubusch@gmail.com> (raw)
In-Reply-To: <20241029202349.69442-1-l.rubusch@gmail.com>
The dwmac 3.72a is an ip version that can be found on Intel/Altera Arria10
SoCs. Going by the hardware features "snps,multicast-filter-bins" and
"snps,perfect-filter-entries" shall be supported. Thus add a
compatibility flag, and extend coverage of the driver for the 3.72a.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
index 598eff926..b9218c07e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
@@ -56,6 +56,7 @@ static const struct of_device_id dwmac_generic_match[] = {
{ .compatible = "snps,dwmac-3.610"},
{ .compatible = "snps,dwmac-3.70a"},
{ .compatible = "snps,dwmac-3.710"},
+ { .compatible = "snps,dwmac-3.72a"},
{ .compatible = "snps,dwmac-4.00"},
{ .compatible = "snps,dwmac-4.10a"},
{ .compatible = "snps,dwmac"},
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 54797edc9..e7e2d6c20 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -522,6 +522,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
if (of_device_is_compatible(np, "st,spear600-gmac") ||
of_device_is_compatible(np, "snps,dwmac-3.50a") ||
of_device_is_compatible(np, "snps,dwmac-3.70a") ||
+ of_device_is_compatible(np, "snps,dwmac-3.72a") ||
of_device_is_compatible(np, "snps,dwmac")) {
/* Note that the max-frame-size parameter as defined in the
* ePAPR v1.1 spec is defined as max-frame-size, it's
--
2.25.1
next prev parent reply other threads:[~2024-10-29 20:24 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-29 20:23 [PATCH v4 00/23] Add Enclustra Arria10 and Cyclone5 SoMs Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 01/23] ARM: dts: socfpga: fix typo Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 02/23] ARM: dts: socfpga: align bus name with bindings Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 03/23] ARM: dts: socfpga: align dma name with binding Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 04/23] ARM: dts: socfpga: align fpga-region name Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 05/23] ARM: dts: socfpga: add label to clock manager Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 06/23] ARM: dts: socfpga: add missing cells properties Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 07/23] ARM: dts: socfpga: fix missing ranges Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 08/23] ARM: dts: socfpga: add clock-frequency property Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 09/23] ARM: dts: socfpga: add ranges property to sram Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 10/23] ARM: dts: socfpga: remove arria10 reset-names Lothar Rubusch
2024-10-29 20:23 ` Lothar Rubusch [this message]
2024-11-01 19:35 ` [PATCH v4 11/23] net: stmmac: add support for dwmac 3.72a Rob Herring
2024-11-02 11:58 ` Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 12/23] dt-bindings: net: snps,dwmac: add support for Arria10 Lothar Rubusch
2024-10-29 21:58 ` Jakub Kicinski
2024-11-01 19:39 ` Rob Herring (Arm)
2024-10-29 20:23 ` [PATCH v4 13/23] ARM: dts: socfpga: add Enclustra boot-mode dtsi Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 14/23] ARM: dts: socfpga: add Enclustra base-board dtsi Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 15/23] ARM: dts: socfpga: add Enclustra Mercury SA1 Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 16/23] dt-bindings: altera: " Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 17/23] ARM: dts: socfpga: add Enclustra Mercury+ SA2 Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 18/23] dt-bindings: altera: add binding for " Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 19/23] ARM: dts: socfpga: add Mercury AA1 combinations Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 20/23] dt-bindings: altera: " Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 21/23] ARM: dts: socfpga: removal of generic PE1 dts Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 22/23] dt-bindings: altera: " Lothar Rubusch
2024-10-29 20:23 ` [PATCH v4 23/23] ARM: dts: socfpga: add Enclustra SoM dts files Lothar Rubusch
2024-10-30 17:04 ` [PATCH v4 00/23] Add Enclustra Arria10 and Cyclone5 SoMs Rob Herring (Arm)
2024-10-31 9:04 ` Lothar Rubusch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241029202349.69442-12-l.rubusch@gmail.com \
--to=l.rubusch@gmail.com \
--cc=a.fatoum@pengutronix.de \
--cc=alexandre.torgue@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@kernel.org \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=marex@denx.de \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=s.trumtrar@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).