From: Mithil Bavishi <bavishimithil@gmail.com>
To: Aaro Koskinen <aaro.koskinen@iki.fi>,
Andreas Kemnade <andreas@kemnade.info>,
Kevin Hilman <khilman@baylibre.com>,
Roger Quadros <rogerq@kernel.org>,
Tony Lindgren <tony@atomide.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-hardening@vger.kernel.org
Subject: [PATCH v2 4/6] arm/dts: Add initial support for Galaxy Tab 2 7.0
Date: Wed, 30 Oct 2024 21:18:44 +0000 [thread overview]
Message-ID: <20241030211847.413-2-bavishimithil@gmail.com> (raw)
In-Reply-To: <20241030211847.413-1-bavishimithil@gmail.com>
Create a device tree for the 3 inch variants (P3100, P3110, P3113)
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
arch/arm/boot/dts/ti/omap/Makefile | 1 +
.../dts/ti/omap/omap4-samsung-espresso7.dts | 70 +++++++++++++++++++
2 files changed, 71 insertions(+)
create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
index 95c68135d..a5bbf4b34 100644
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-panda.dtb \
omap4-panda-a4.dtb \
omap4-panda-es.dtb \
+ omap4-samsung-espresso7.dtb \
omap4-sdp.dtb \
omap4-sdp-es23plus.dtb \
omap4-var-dvk-om44.dtb \
diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
new file mode 100644
index 000000000..9049d412a
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include "omap4-samsung-espresso-common.dtsi"
+
+/ {
+ model = "Samsung Galaxy Tab 2 (7 inch)";
+ compatible = "samsung,espresso7", "ti,omap4430", "ti,omap4";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ pwms = <&pwm10 0 1200 0>;
+ power-supply = <®_lcd>;
+ enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <2>;
+ };
+
+ panel {
+ compatible = "panel-lvds";
+ power-supply = <®_lcd>;
+ width-mm = <154>;
+ height-mm = <90>;
+ data-mapping = "vesa-24";
+ backlight = <&backlight>;
+
+ panel-timing {
+ clock-frequency = <47255554>;
+
+ hback-porch = <210>;
+ hactive = <1024>;
+ hfront-porch = <186>;
+ hsync-len = <50>;
+
+ vback-porch = <11>;
+ vactive = <600>;
+ vfront-porch = <24>;
+ vsync-len = <10>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ syncclk-active = <0>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&bridge_out>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ touchscreen@48 {
+ compatible = "melfas,mms136";
+ reg = <0x48>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-size-x = <1023>;
+ touchscreen-size-y = <599>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_pins>;
+ avdd-supply = <®_touch_ldo_en>;
+ vdd-supply = <&ldo6>;
+ };
+};
--
2.43.0
next prev parent reply other threads:[~2024-10-30 21:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-30 21:18 [PATCH v2 3/6] dt-bindings: omap: Add Samaung Galaxy Tab 2 7.0 Mithil Bavishi
2024-10-30 21:18 ` Mithil Bavishi [this message]
2024-10-31 8:19 ` [PATCH v2 4/6] arm/dts: Add initial support for " Krzysztof Kozlowski
2024-10-30 21:18 ` [PATCH v2 5/6] dt-bindings: omap: Add Samaung Galaxy Tab 2 10.1 Mithil Bavishi
2024-10-30 21:18 ` [PATCH v2 6/6] arm/dts: Add initial support for " Mithil Bavishi
2024-10-31 8:18 ` [PATCH v2 3/6] dt-bindings: omap: Add Samaung Galaxy Tab 2 7.0 Krzysztof Kozlowski
2024-10-31 8:24 ` Andreas Kemnade
2024-10-31 9:49 ` Krzysztof Kozlowski
2024-10-31 10:46 ` Mithil Bavishi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241030211847.413-2-bavishimithil@gmail.com \
--to=bavishimithil@gmail.com \
--cc=aaro.koskinen@iki.fi \
--cc=andreas@kemnade.info \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=robh@kernel.org \
--cc=rogerq@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).