From: Dzmitry Sankouski <dsankouski@gmail.com>
To: Sebastian Reichel <sre@kernel.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Pavel Machek <pavel@ucw.cz>
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-input@vger.kernel.org,
linux-leds@vger.kernel.org,
Dzmitry Sankouski <dsankouski@gmail.com>
Subject: [PATCH v8 2/7] dt-bindings: mfd: add maxim,max77705
Date: Thu, 31 Oct 2024 00:30:37 +0300 [thread overview]
Message-ID: <20241031-starqltechn_integration_upstream-v8-2-2fa666c2330e@gmail.com> (raw)
In-Reply-To: <20241031-starqltechn_integration_upstream-v8-0-2fa666c2330e@gmail.com>
Add maxim,max77705 core binding part.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Changes in v8:
- fix leds compatible
Changes in v6:
- unevaluatedProperties must be false
- drop excessive sentence from description,
just describe the device
- change leds compatible to maxim,max77705-rgb
Changes in v5:
- formatting changes
- add unevaluatedProperties: false for nodes referencing
common schemas
- remove additionalProperties on nodes with
unevaluatedProperties: false
- add min and max to led index
Changes in v4:
- change dts example intendation from tabs
to spaces
- remove interrupt-names property
- remove obvious reg description
- split long(>80) lines
---
Documentation/devicetree/bindings/mfd/maxim,max77705.yaml | 174 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 175 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml
new file mode 100644
index 000000000000..5e7bb837c9f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77705.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77705 Companion Power Management IC and USB Type-C interface IC
+
+maintainers:
+ - Dzmitry Sankouski <dsankouski@gmail.com>
+
+description: |
+ The Maxim MAX77705 is a Companion Power Management and Type-C
+ interface IC which includes charger, fuelgauge, LED, haptic motor driver and
+ Type-C management IC.
+
+properties:
+ compatible:
+ const: maxim,max77705
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ charger:
+ $ref: /schemas/power/supply/power-supply.yaml
+ unevaluatedProperties: false
+ properties:
+ compatible:
+ const: maxim,max77705-charger
+
+ required:
+ - compatible
+ - monitored-battery
+
+ fuel-gauge:
+ $ref: /schemas/power/supply/power-supply.yaml
+ type: object
+ unevaluatedProperties: false
+ description: MAX77705 fuel gauge with ModelGauge m5 EZ algorithm support.
+
+ properties:
+ compatible:
+ const: maxim,max77705-fuel-gauge
+
+ shunt-resistor-micro-ohms:
+ description:
+ The value of current sense resistor in microohms.
+
+ required:
+ - compatible
+ - shunt-resistor-micro-ohms
+ - monitored-battery
+ - power-supplies
+
+ haptic:
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: maxim,max77705-haptic
+
+ haptic-supply: true
+
+ pwms:
+ maxItems: 1
+
+ required:
+ - compatible
+ - haptic-supply
+ - pwms
+
+ leds:
+ type: object
+ additionalProperties: false
+ description:
+ Up to 4 LEDs supported. One LED is represented by one child node.
+
+ properties:
+ compatible:
+ const: maxim,max77705-rgb
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^led@[0-3]$":
+ $ref: /schemas/leds/common.yaml#
+ type: object
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ description: LED index.
+ minimum: 0
+ maximum: 3
+
+ required:
+ - reg
+
+ required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "maxim,max77705";
+ reg = <0x66>;
+ interrupt-parent = <&pm8998_gpios>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&chg_int_default>;
+ pinctrl-names = "default";
+
+ leds {
+ compatible = "maxim,max77705-rgb";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ label = "red:usr1";
+ };
+
+ led@2 {
+ reg = <2>;
+ label = "green:usr2";
+ };
+
+ led@3 {
+ reg = <3>;
+ label = "blue:usr3";
+ };
+ };
+
+ max77705_charger: charger {
+ compatible = "maxim,max77705-charger";
+ monitored-battery = <&battery>;
+ };
+
+ fuel-gauge {
+ compatible = "maxim,max77705-fuel-gauge";
+ monitored-battery = <&battery>;
+ power-supplies = <&max77705_charger>;
+ shunt-resistor-micro-ohms = <5000>;
+ };
+
+
+ haptic {
+ compatible = "maxim,max77705-haptic";
+ haptic-supply = <&vib_regulator>;
+ pwms = <&vib_pwm 0 50000>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 3b9c6763f679..e92160703880 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14131,6 +14131,7 @@ B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/*/maxim,max14577.yaml
F: Documentation/devicetree/bindings/*/maxim,max77686.yaml
F: Documentation/devicetree/bindings/*/maxim,max77693.yaml
+F: Documentation/devicetree/bindings/*/maxim,max77705*.yaml
F: Documentation/devicetree/bindings/*/maxim,max77843.yaml
F: Documentation/devicetree/bindings/clock/maxim,max77686.txt
F: drivers/*/*max77843.c
--
2.39.2
next prev parent reply other threads:[~2024-10-30 21:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-30 21:30 [PATCH v8 0/7] Add support for Maxim Integrated MAX77705 PMIC Dzmitry Sankouski
2024-10-30 21:30 ` [PATCH v8 1/7] power: supply: add undervoltage health status property Dzmitry Sankouski
2024-10-30 21:30 ` Dzmitry Sankouski [this message]
2024-10-30 21:30 ` [PATCH v8 3/7] mfd: Add new driver for MAX77705 PMIC Dzmitry Sankouski
2024-11-02 19:55 ` kernel test robot
2024-10-30 21:30 ` [PATCH v8 4/7] input: max77693: add max77705 haptic support Dzmitry Sankouski
2024-10-30 21:30 ` [PATCH v8 5/7] power: supply: max77705: Add charger driver for Maxim 77705 Dzmitry Sankouski
2024-10-30 21:30 ` [PATCH v8 6/7] power: supply: max77705: Add fuel gauge " Dzmitry Sankouski
2024-10-30 21:30 ` [PATCH v8 7/7] leds: max77705: Add LEDs support Dzmitry Sankouski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241031-starqltechn_integration_upstream-v8-2-2fa666c2330e@gmail.com \
--to=dsankouski@gmail.com \
--cc=conor+dt@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=krzk@kernel.org \
--cc=lee@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).