From: Antoniu Miclaus <antoniu.miclaus@analog.com>
To: <jic23@kernel.org>, <conor+dt@kernel.org>,
<dlechner@baylibre.com>, <linux-iio@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-pwm@vger.kernel.org>
Cc: Antoniu Miclaus <antoniu.miclaus@analog.com>
Subject: [PATCH v5 2/6] iio: backend: add support for data size set
Date: Fri, 1 Nov 2024 13:23:54 +0200 [thread overview]
Message-ID: <20241101112358.22996-3-antoniu.miclaus@analog.com> (raw)
In-Reply-To: <20241101112358.22996-1-antoniu.miclaus@analog.com>
Add backend support for setting the data size used.
This setting can be adjusted within the IP cores interfacing devices.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
no changes in v5.
drivers/iio/industrialio-backend.c | 21 +++++++++++++++++++++
include/linux/iio/backend.h | 3 +++
2 files changed, 24 insertions(+)
diff --git a/drivers/iio/industrialio-backend.c b/drivers/iio/industrialio-backend.c
index c792cd1e24e8..6f4e38417dfd 100644
--- a/drivers/iio/industrialio-backend.c
+++ b/drivers/iio/industrialio-backend.c
@@ -660,6 +660,27 @@ int iio_backend_interface_type_get(struct iio_backend *back,
}
EXPORT_SYMBOL_NS_GPL(iio_backend_interface_type_get, IIO_BACKEND);
+/**
+ * iio_backend_data_size_set - set the data width/size in the data bus.
+ * @back: Backend device
+ * @size: Size in bits
+ *
+ * Some frontend devices can dynamically control the word/data size on the
+ * interface/data bus. Hence, the backend device needs to be aware of it so
+ * data can be correctly transferred.
+ *
+ * Return:
+ * 0 on success, negative error number on failure.
+ */
+size_t iio_backend_data_size_set(struct iio_backend *back, size_t size)
+{
+ if (!size)
+ return -EINVAL;
+
+ return iio_backend_op_call(back, data_size_set, size);
+}
+EXPORT_SYMBOL_NS_GPL(iio_backend_data_size_set, IIO_BACKEND);
+
/**
* iio_backend_extend_chan_spec - Extend an IIO channel
* @back: Backend device
diff --git a/include/linux/iio/backend.h b/include/linux/iio/backend.h
index e5ea90f1c3e0..83ca4f0124db 100644
--- a/include/linux/iio/backend.h
+++ b/include/linux/iio/backend.h
@@ -93,6 +93,7 @@ enum iio_backend_interface_type {
* @ext_info_set: Extended info setter.
* @ext_info_get: Extended info getter.
* @interface_type_get: Interface type.
+ * @data_size_set: Data size.
* @read_raw: Read a channel attribute from a backend device
* @debugfs_print_chan_status: Print channel status into a buffer.
* @debugfs_reg_access: Read or write register value of backend.
@@ -130,6 +131,7 @@ struct iio_backend_ops {
const struct iio_chan_spec *chan, char *buf);
int (*interface_type_get)(struct iio_backend *back,
enum iio_backend_interface_type *type);
+ int (*data_size_set)(struct iio_backend *back, ssize_t size);
int (*read_raw)(struct iio_backend *back,
struct iio_chan_spec const *chan, int *val, int *val2,
long mask);
@@ -180,6 +182,7 @@ ssize_t iio_backend_ext_info_get(struct iio_dev *indio_dev, uintptr_t private,
const struct iio_chan_spec *chan, char *buf);
int iio_backend_interface_type_get(struct iio_backend *back,
enum iio_backend_interface_type *type);
+size_t iio_backend_data_size_set(struct iio_backend *back, size_t size);
int iio_backend_read_raw(struct iio_backend *back,
struct iio_chan_spec const *chan, int *val, int *val2,
long mask);
--
2.47.0
next prev parent reply other threads:[~2024-11-01 11:24 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-01 11:23 [PATCH 0/7] *** Add support for AD485x DAS Family *** Antoniu Miclaus
2024-11-01 11:23 ` [PATCH v5 1/6] iio: backend: add API for interface get Antoniu Miclaus
2024-11-01 19:17 ` David Lechner
2024-11-01 11:23 ` Antoniu Miclaus [this message]
2024-11-01 19:23 ` [PATCH v5 2/6] iio: backend: add support for data size set David Lechner
2024-11-01 11:23 ` [PATCH v5 3/6] iio: adc: adi-axi-adc: add interface type Antoniu Miclaus
2024-11-01 19:26 ` David Lechner
2024-11-01 11:23 ` [PATCH v5 4/6] iio: adc: adi-axi-adc: set data format Antoniu Miclaus
2024-11-01 19:52 ` David Lechner
2024-11-01 21:00 ` David Lechner
2024-11-01 11:23 ` [PATCH v5 5/6] dt-bindings: iio: adc: add ad4851 Antoniu Miclaus
2024-11-01 11:23 ` [PATCH v5 6/6] iio: adc: ad4851: add ad485x driver Antoniu Miclaus
2024-11-01 15:21 ` Jonathan Cameron
2024-11-01 19:14 ` David Lechner
2024-11-07 10:51 ` Miclaus, Antoniu
2024-11-07 16:13 ` David Lechner
2024-11-07 16:47 ` David Lechner
2024-11-09 15:39 ` Jonathan Cameron
2024-11-11 16:03 ` David Lechner
2024-11-08 12:50 ` Miclaus, Antoniu
2024-11-02 14:58 ` Jonathan Cameron
2024-11-01 15:17 ` [PATCH 0/7] *** Add support for AD485x DAS Family *** Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241101112358.22996-3-antoniu.miclaus@analog.com \
--to=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox