[PATCH v2 3/7] dt-bindings: input: matrix_keypad - convert to YAML

[Markus Burri <markus.burri@mt.com>]

Convert the gpio-matrix-keypad bindings from text to DT schema.

Signed-off-by: Markus Burri <markus.burri@mt.com>
---
 .../bindings/input/gpio-matrix-keypad.txt     | 49 ---------
 .../bindings/input/gpio-matrix-keypad.yaml    | 99 +++++++++++++++++++
 2 files changed, 99 insertions(+), 49 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
 create mode 100644 Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml

diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
deleted file mode 100644
index 570dc10..0000000
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* GPIO driven matrix keypad device tree bindings
-
-GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
-The matrix keypad supports multiple row and column lines, a key can be
-placed at each intersection of a unique row and a unique column. The matrix
-keypad can sense a key-press and key-release by means of GPIO lines and
-report the event using GPIO interrupts to the cpu.
-
-Required Properties:
-- compatible:		Should be "gpio-matrix-keypad"
-- row-gpios:		List of gpios used as row lines. The gpio specifier
-			for this property depends on the gpio controller to
-			which these row lines are connected.
-- col-gpios:		List of gpios used as column lines. The gpio specifier
-			for this property depends on the gpio controller to
-			which these column lines are connected.
-- linux,keymap:		The definition can be found at
-			bindings/input/matrix-keymap.txt
-
-Optional Properties:
-- linux,no-autorepeat:	do no enable autorepeat feature.
-- wakeup-source:	use any event on keypad as wakeup event.
-			(Legacy property supported: "linux,wakeup")
-- debounce-delay-ms:	debounce interval in milliseconds
-- col-scan-delay-us:	delay, measured in microseconds, that is needed
-			before we can scan keypad after activating column gpio
-- drive-inactive-cols:	drive inactive columns during scan,
-			default is to turn inactive columns into inputs.
-
-Example:
-	matrix-keypad {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio2 25 0
-			     &gpio2 26 0
-			     &gpio2 27 0>;
-
-		col-gpios = <&gpio2 21 0
-			     &gpio2 22 0>;
-
-		linux,keymap = <0x0000008B
-				0x0100009E
-				0x02000069
-				0x0001006A
-				0x0101001C
-				0x0201006C>;
-	};
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
new file mode 100644
index 0000000..745652b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/input/gpio-matrix-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO matrix keypad
+
+description: |
+  GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
+  The matrix keypad supports multiple row and column lines, a key can be
+  placed at each intersection of a unique row and a unique column. The matrix
+  keypad can sense a key-press and key-release by means of GPIO lines and
+  report the event using GPIO interrupts to the cpu.
+
+maintainers:
+  - Marek Vasut <marek.vasut@gmail.com>
+
+properties:
+  compatible:
+    const: gpio-matrix-keypad
+
+  row-gpios:
+    description: |
+      List of GPIOs used as row lines. The gpio specifier
+      for this property depends on the gpio controller to
+      which these row lines are connected.
+
+  col-gpios:
+    description: |
+      List of GPIOs used as column lines. The gpio specifier
+      for this property depends on the gpio controller to
+      which these column lines are connected.
+
+  linux,keymap:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      An array of packed 1-cell entries containing the equivalent of row,
+      column and linux key-code. The 32-bit big endian cell is packed as:
+          row << 24 | column << 16 | key-code
+
+  linux,no-autorepeat:
+    type: boolean
+    description: Do not enable autorepeat feature.
+    default: false
+
+  wakeup-source:
+    description: |
+      Use any event on keypad as wakeup event.
+      (Legacy property supported: "linux,wakeup")
+    default: false
+
+  debounce-delay-ms:
+    description: Debounce interval in milliseconds.
+    default: 0
+
+  col-scan-delay-us:
+    description: |
+      Delay, measured in microseconds, that is needed
+      before we can scan keypad after activating column gpio.
+    default: 0
+
+  drive-inactive-cols:
+    type: boolean
+    description: |
+      Drive inactive columns during scan,
+      default is to turn inactive columns into inputs.
+    default: false
+
+required:
+  - compatible
+  - row-gpios
+  - col-gpios
+  - linux,keymap
+
+additionalProperties: false
+
+examples:
+  - |
+    matrix-keypad {
+        compatible = "gpio-matrix-keypad";
+        debounce-delay-ms = <5>;
+        col-scan-delay-us = <2>;
+
+        row-gpios = <&gpio2 25 0
+                     &gpio2 26 0
+                     &gpio2 27 0>;
+
+        col-gpios = <&gpio2 21 0
+                     &gpio2 22 0>;
+
+        linux,keymap = <0x0000008B
+                        0x0100009E
+                        0x02000069
+                        0x0001006A
+                        0x0101001C
+                        0x0201006C>;
+    };
-- 
2.39.5