From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: "Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"Russell King" <linux@armlinux.org.uk>,
"João Rodrigues" <jrodrigues@ubimet.com>,
"Bruno Thomsen" <bruno.thomsen@gmail.com>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>,
linux@ew.tq-group.com, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/8] ARM: dts: imx7-mba7: remove LVDS transmitter regulator
Date: Fri, 8 Nov 2024 14:49:19 +0100 [thread overview]
Message-ID: <20241108134926.1324626-2-alexander.stein@ew.tq-group.com> (raw)
In-Reply-To: <20241108134926.1324626-1-alexander.stein@ew.tq-group.com>
This regulator essentially controls the SHTDN# pin of the LVDS encoder.
Remove it for proper usage with 'lvds-encoder' driver.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
index e1c401f468e16..cc3760fa7d981 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
@@ -162,15 +162,6 @@ reg_mba_12v0: regulator-mba-12v0 {
enable-active-high;
};
- reg_lvds_transmitter: regulator-lvds-transmitter {
- compatible = "regulator-fixed";
- regulator-name = "#SHTDN_LVDS";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
reg_vref_1v8: regulator-vref-1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC1V8_REF";
--
2.34.1
next prev parent reply other threads:[~2024-11-08 13:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-08 13:49 [PATCH 0/8] TQMa7x DT cleanup Alexander Stein
2024-11-08 13:49 ` Alexander Stein [this message]
2024-11-08 13:49 ` [PATCH 2/8] ARM: dts: imx7-tqma7: Remove superfluous status="okay" property Alexander Stein
2024-11-08 13:49 ` [PATCH 3/8] ARM: dts: imx7-tqma7: add missing vs-supply for LM75A (rev. 01xxx) Alexander Stein
2024-11-08 13:49 ` [PATCH 4/8] ARM: dts: imx7-mba7: Add 3.3V and 5.0V regulators Alexander Stein
2024-11-08 13:49 ` [PATCH 5/8] ARM: dts: imx7-mba7: Fix SD card vmmc-supply Alexander Stein
2024-11-08 13:49 ` [PATCH 6/8] ARM: dts: imx7-mba7: Remove duplicated power supply Alexander Stein
2024-11-08 13:49 ` [PATCH 7/8] ARM: dts: imx7[d]-mba7: add Ethernet PHY IRQ support Alexander Stein
2024-11-08 13:49 ` [PATCH 8/8] ARM: imx_v6_v7_defconfig: enable JC42 for TQMa7x Alexander Stein
2024-11-08 14:02 ` [PATCH 0/8] TQMa7x DT cleanup Niebel, Markus
2024-11-11 19:29 ` Bruno Thomsen
2024-12-09 9:11 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241108134926.1324626-2-alexander.stein@ew.tq-group.com \
--to=alexander.stein@ew.tq-group.com \
--cc=bruno.thomsen@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=jrodrigues@ubimet.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linux@ew.tq-group.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox