[PATCH v3 00/10] Initial support for Samsung Galaxy Tab 2 series

[PATCH v3 00/10] Initial support for Samsung Galaxy Tab 2 series

[Mithil Bavishi]

This series adds initial support for the Samsung Galaxy Tab 2
(samsung-espresso7/10) series of devices. It adds support for 6 variants
(P3100, P3110, P3113, P5100, P5110, P5113). Downstream categorised them
based on 3G and WiFi, but since they use different panel, touch
controllers, batteries, I decided to categorise them based on screen
size as espresso7 and espresso10.

It adds basic functionality for both the models including panel, drm,
sdcard, touchscreen, mmc, wifi, bluetooth, keys, battery, fuel gauge,
pmic, sensors.

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
Changes in v3
- Use device tree from the correct branch
- Fix commit subjects to matching the subsystem
- Add Doestek vendor
- Add compatible for LVDS encoder
- Add compatibles for 7 and 10 inch panels
- Clean up device tree using "make CHECK_DTBS=y"
- Link to v2: https://lore.kernel.org/all/20241030211215.347710-1-bavishimithil@gmail.com/
Changes in v2
- Fix node names in common dtsi to have - instead of _
- Removed import for twl6030.dtsi
- Edited dts to completely use twl6032 nodes
- Fixed typo ldosb -> ldousb
- Link to v1: https://lore.kernel.org/all/20241030194136.297648-1-bavishimithil@gmail.com/

--
Mithil Bavishi (10):
  ARM: dts: twl6032: Add DTS file for TWL6032 PMIC
  dt-bindings: vendor-prefixes: Add Doestek
  dt-bindings: display: bridge: lvds-codec: add doestek,dtc34lm85am
  dt-bindings: display: panel-lvds: Add compatible for Samsung
    LTN070NL01 Panel
  dt-bindings: display: panel-lvds: Add compatible for Samsung
    LTN101AL03 Panel
  ARM: dts: ti: omap: espresso-common: Add common device tree for
    Samsung Galaxy Tab 2 series
  dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0
  ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy
    Tab 2 7.0
  dt-bindings: omap: Add Samsung Galaxy Tab 2 10.1
  ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy
    Tab 2 10.1

 .../devicetree/bindings/arm/ti/omap.yaml      |   2 +
 .../bindings/display/bridge/lvds-codec.yaml   |   1 +
 .../bindings/display/panel/panel-lvds.yaml    |   4 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 .../omap/omap4-samsung-espresso-common.dtsi   | 680 ++++++++++++++++++
 .../dts/ti/omap/omap4-samsung-espresso10.dts  | 102 +++
 .../dts/ti/omap/omap4-samsung-espresso7.dts   |  70 ++
 arch/arm/boot/dts/ti/omap/twl6032.dtsi        |  77 ++
 8 files changed, 938 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
 create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi

-- 
2.43.0

[PATCH v3 01/10] ARM: dts: twl6032: Add DTS file for TWL6032 PMIC

[Mithil Bavishi]

Add a dedicated DTS file for the TWL6032 PMIC (Phoenix Lite). Already
has driver support with TWL6030 (Phoenix) since both of them are so
similar, some nodes can be reused from TWL6030 as well.

This can be included in the board files like twl6030.
Example:
...
&i2c1 {
    twl: twl@48 {
        reg = <0x48>;
        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
        interrupt-controller;
        interrupt-parent = <&gic>;
    };
};

/include/ "twl6032.dtsi"
...

Used in devices like samsung-espresso, amazon-jem, epson-embt2ws etc.

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 arch/arm/boot/dts/ti/omap/twl6032.dtsi | 77 ++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi

diff --git a/arch/arm/boot/dts/ti/omap/twl6032.dtsi b/arch/arm/boot/dts/ti/omap/twl6032.dtsi
new file mode 100644
index 000000000..d599a2ca6
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/twl6032.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Integrated Power Management Chip
+ * https://www.ti.com/lit/ds/symlink/twl6032.pdf
+ */
+
+&twl {
+	compatible = "ti,twl6032";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vio: regulator-vio {
+		compatible = "ti,twl6032-vio";
+	};
+
+	ldo1: regulator-ldo1 {
+		compatible = "ti,twl6032-ldo1";
+	};
+
+	ldo2: regulator-ldo2 {
+		compatible = "ti,twl6032-ldo2";
+	};
+
+	ldo3: regulator-ldo3 {
+		compatible = "ti,twl6032-ldo3";
+	};
+
+	ldo4: regulator-ldo4 {
+		compatible = "ti,twl6032-ldo4";
+	};
+
+	ldo5: regulator-ldo5 {
+		compatible = "ti,twl6032-ldo5";
+	};
+
+	ldo6: regulator-ldo6 {
+		compatible = "ti,twl6032-ldo6";
+	};
+
+	ldoln: regulator-ldoln {
+		compatible = "ti,twl6032-ldoln";
+	};
+
+	ldousb: regulator-ldousb {
+		compatible = "ti,twl6032-ldousb";
+	};
+
+	smps4: regulator-smps4 {
+		compatible = "ti,twl6032-smps4";
+	};
+
+	gpadc: gpadc {
+		compatible = "ti,twl6032-gpadc";
+		interrupts = <3>;
+		#io-channel-cells = <1>;
+	};
+
+	twl_usb_comparator: usb-comparator {
+		compatible = "ti,twl6030-usb";
+		interrupts = <4>, <10>;
+	};
+
+	twl_pwm: pwm {
+		compatible = "ti,twl6030-pwm";
+		#pwm-cells = <2>;
+	};
+
+	twl_pwmled: pwmled {
+		compatible = "ti,twl6030-pwmled";
+		#pwm-cells = <2>;
+	};
+};
-- 
2.43.0

[PATCH v3 02/10] dt-bindings: vendor-prefixes: Add Doestek

[Mithil Bavishi]

Add vendor prefix for Doestek Co., Ltd.
Link: http://www.doestek.co.kr/

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index b320a39de..3ef4c948a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -392,6 +392,8 @@ patternProperties:
     description: D-Link Corporation
   "^dmo,.*":
     description: Data Modul AG
+  "^doestek,*":
+    description: Doestek Co., Ltd.
   "^domintech,.*":
     description: Domintech Co., Ltd.
   "^dongwoon,.*":
-- 
2.43.0

Re: [PATCH v3 02/10] dt-bindings: vendor-prefixes: Add Doestek

[Krzysztof Kozlowski]

On Fri, Nov 08, 2024 at 08:04:31PM +0000, Mithil Bavishi wrote:
> Add vendor prefix for Doestek Co., Ltd.
> Link: http://www.doestek.co.kr/
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

[PATCH v3 03/10] dt-bindings: display: bridge: lvds-codec: add doestek,dtc34lm85am

[Mithil Bavishi]

Add compatible strings for the Doestek DTC34LM85AM Flat Panel Display
Transmitter

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 6ceeed76e..a8df7e919 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -33,6 +33,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - doestek,dtc34lm85am # For the Doestek DTC34LM85AM Flat Panel Display (FPD) Transmitter
               - ti,ds90c185   # For the TI DS90C185 FPD-Link Serializer
               - ti,ds90c187   # For the TI DS90C187 FPD-Link Serializer
               - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
-- 
2.43.0

Re: [PATCH v3 03/10] dt-bindings: display: bridge: lvds-codec: add doestek,dtc34lm85am

[Krzysztof Kozlowski]

On Fri, Nov 08, 2024 at 08:04:32PM +0000, Mithil Bavishi wrote:
> Add compatible strings for the Doestek DTC34LM85AM Flat Panel Display
> Transmitter
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
> ---
>  Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v3 04/10] dt-bindings: display: panel-lvds: Add compatible for Samsung LTN070NL01 Panel

[Mithil Bavishi]

The LTN070NL01 is a 7.0 inch 1024x600, 24 bit, VESA Compatible, TFT display panel

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 Documentation/devicetree/bindings/display/panel/panel-lvds.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
index 155d8ffa8..0cdd05d10 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
@@ -50,6 +50,8 @@ properties:
           - hannstar,hsd101pww2
           # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel
           - hydis,hv070wx2-1e0
+          # Samsung LTN070NL01 7.0" WSVGA (1024x600) TFT LCD LVDS panel
+          - samsung,ltn070nl01
           - tbs,a711-panel
 
       - const: panel-lvds
-- 
2.43.0

Re: [PATCH v3 04/10] dt-bindings: display: panel-lvds: Add compatible for Samsung LTN070NL01 Panel

[Krzysztof Kozlowski]

On Fri, Nov 08, 2024 at 08:04:33PM +0000, Mithil Bavishi wrote:
> The LTN070NL01 is a 7.0 inch 1024x600, 24 bit, VESA Compatible, TFT display panel

Please wrap commit message according to Linux coding style / submission
process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v3 05/10] dt-bindings: display: panel-lvds: Add compatible for Samsung LTN101AL03 Panel

[Mithil Bavishi]

The LTN101AL03 is a 10.1 inch 800x1280, 24 bit, VESA Compatible, TFT display panel

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 Documentation/devicetree/bindings/display/panel/panel-lvds.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
index 0cdd05d10..82bcaec68 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
@@ -52,6 +52,8 @@ properties:
           - hydis,hv070wx2-1e0
           # Samsung LTN070NL01 7.0" WSVGA (1024x600) TFT LCD LVDS panel
           - samsung,ltn070nl01
+          # Samsung LTN101AL03 10.1" WXGA (800x1280) TFT LCD LVDS panel
+          - samsung,ltn101al03
           - tbs,a711-panel
 
       - const: panel-lvds
-- 
2.43.0

Re: [PATCH v3 05/10] dt-bindings: display: panel-lvds: Add compatible for Samsung LTN101AL03 Panel

[Krzysztof Kozlowski]

On Fri, Nov 08, 2024 at 08:04:34PM +0000, Mithil Bavishi wrote:
> The LTN101AL03 is a 10.1 inch 800x1280, 24 bit, VESA Compatible, TFT display panel
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
> ---

Squash it with previous patch. Each of such trivial one-liners for
similar device is review step for me.

Best regards,
Krzysztof

[PATCH v3 06/10] ARM: dts: ti: omap: espresso-common: Add common device tree for Samsung Galaxy Tab 2 series

[Mithil Bavishi]

Create common device tree for Samsung Espresso series devices

Let's create a common tree for all the variants first. Later we can
device specific trees based on their screen sizes.

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 .../omap/omap4-samsung-espresso-common.dtsi   | 680 ++++++++++++++++++
 1 file changed, 680 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi

diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
new file mode 100644
index 000000000..62ff3f36c
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
@@ -0,0 +1,680 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+#include "dt-bindings/gpio/gpio.h"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "omap443x.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops_region@A0000000 {
+			no-map;
+			reg = <0xA0000000 0x200000>;
+		};
+
+		continuous_splash: framebuffer@bef00000{
+			reg = <0xbef00000 (1024 * 600 * 4)>;
+			no-map;
+		};
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+	};
+
+	i2c-gpio-5 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c-gpio-6 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c-gpio-7 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fuel-gauge@36 {
+			compatible = "maxim,max17042";
+			reg = <0x36>;
+			pinctrl-0 = <&fuel_alert_irq>;
+			pinctrl-names = "default";
+			interrupt-parent = <&gpio2>;
+			interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+			maxim,rsns-microohm = <10000>;
+			maxim,over-heat-temp = <500>;
+			maxim,dead-volt = <2500>;
+			maxim,over-volt = <4300>;
+		};
+	};
+
+	reg_espresso_wlan: regulator-espresso-wlan {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlanen_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "espresso_wlan";
+		regulator-max-microvolt = <2000000>;
+		regulator-min-microvolt = <2000000>;
+		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO_104 */
+		startup-delay-us = <70000>;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	wlan_pwrseq: wlan-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&twl 0>;
+		clock-names = "ext_clock";
+	};
+
+	reg_espresso_internal: regulator-espresso-internal {
+		compatible = "regulator-fixed";
+		regulator-name = "eMMC_LDO";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; /* GPIO_63 */
+		startup-delay-us = <100000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	reg_espresso_external: regulator-espresso-external {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc1";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; /* GPIO_34 */
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	reg_touch_ldo_en: regulator-touch-ldo-en  {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_ldo_en";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* GPIO_54 */
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		power {
+			label = "power";
+
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; /* GPIO_wk3 */
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume_up"; /* GPIO_wk30 */
+			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+		};
+
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume_down"; /* GPIO_wk8 */
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_lcd: regulator-lcd  {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_en";
+		gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO_135 */
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	pwm10: pwm-10 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm10_default>;
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer10>;
+		ti,clock-source = <0x00>;
+	};
+
+	lvds-encoder {
+		compatible = "doestek,dtc34lm85am", "lvds-encoder";
+		powerdown-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; /* GPIO_136 */
+		power-supply = <&reg_lcd>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; /* GPIO_38 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	gp2a_shunt: current-sense-shunt {
+		compatible = "current-sense-shunt";
+		io-channels = <&gpadc 4>;
+		shunt-resistor-micro-ohms = <24000000>; /* 24 ohms */
+		#io-channel-cells = <0>;
+	};
+
+	led-ir {
+		compatible = "gpio-ir-tx";
+		gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* GPIO_59 */
+	};
+};
+
+&omap4_pmx_wkup {
+	twl6030_wkup_pins: pinmux-twl6030-wkup-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x54, PIN_OUTPUT | MUX_MODE3)
+			/* fref_clk0_out.sys_drm_msecure */
+		>;
+	};
+
+	gpio_keys: gpio-keys-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x046, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
+			/* sim_cd.gpio_wk3 - EXT_WAKEUP */
+			OMAP4_IOPAD(0x056, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
+			/* fref_clk3_req.gpio_wk30 - VOL_UP */
+			OMAP4_IOPAD(0x05C, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
+			/* fref_clk4_out.gpio_wk8 - VOL_DN */
+		>;
+	};
+
+	prox_irq: prox-irq-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x042, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE3)
+			/* sim_clk.gpio_wk1 - PS_VOUT */
+		>;
+	};
+};
+
+&omap4_pmx_core {
+	pwm10_default: pinmux-pwm10-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0X0D6, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE1)
+			/* usbb1_ulpitll_dat6.dmtimer10_pwm_evt - LED_BACKLIGHT_PWM */
+		>;
+	};
+
+	backlight_pins: pinmux-backlight-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0X0D8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)
+			/* usbb1_ulpitll_dat7.gpio_95 - LED_BACKLIGHT_RESET */
+		>;
+	};
+
+	lvds_pins: pinmux-lvds-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0X136, PIN_OUTPUT | MUX_MODE3)
+			/* mcspi1_simo.gpio_136 - LVDS_nSHDN */
+		>;
+	};
+
+	i2c1_pins: pinmux-i2c1-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux-i2c2-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux-i2c3-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux-i2c4-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	mmc2_pins: pinmux-mmc2-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat0 */
+			OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat1 */
+			OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat2 */
+			OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat3 */
+			OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat4 */
+			OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat5 */
+			OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat6 */
+			OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat7 */
+			OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_clk */
+			OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_cmd */
+		>;
+	};
+
+	mmc1_pins: pinmux-mmc1-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_cmd */
+			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_dat0 */
+			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	mmc5_pins: pinmux-mmc5-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux-dss-dpi-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x162, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data23 */
+			OMAP4_IOPAD(0x164, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data22 */
+			OMAP4_IOPAD(0x166, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data21 */
+			OMAP4_IOPAD(0x168, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data20 */
+			OMAP4_IOPAD(0x16a, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data19 */
+			OMAP4_IOPAD(0x16c, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data18 */
+			OMAP4_IOPAD(0x16e, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data15 */
+			OMAP4_IOPAD(0x170, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data14 */
+			OMAP4_IOPAD(0x172, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data13 */
+			OMAP4_IOPAD(0x174, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data12 */
+			OMAP4_IOPAD(0x176, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data11 */
+
+			OMAP4_IOPAD(0x1b4, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data10 */
+			OMAP4_IOPAD(0x1b6, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data9 */
+			OMAP4_IOPAD(0x1b8, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data16 */
+			OMAP4_IOPAD(0x1ba, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data17 */
+			OMAP4_IOPAD(0x1bc, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_hsync */
+			OMAP4_IOPAD(0x1be, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_pclk */
+			OMAP4_IOPAD(0x1c0, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_vsync */
+			OMAP4_IOPAD(0x1c2, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_de */
+			OMAP4_IOPAD(0x1c4, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data8 */
+			OMAP4_IOPAD(0x1c6, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data7 */
+			OMAP4_IOPAD(0x1c8, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data6 */
+			OMAP4_IOPAD(0x1ca, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data5 */
+			OMAP4_IOPAD(0x1cc, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data4 */
+			OMAP4_IOPAD(0x1ce, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data3 */
+
+			OMAP4_IOPAD(0x1d0, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data2 */
+			OMAP4_IOPAD(0x1d2, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data1 */
+			OMAP4_IOPAD(0x1d4, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data0 */
+		>;
+	};
+
+	wlanen_gpio: pinmux-wlanen-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)	/* gpmc_ncs7.gpio_104 */
+		>;
+	};
+
+	twl6030_pins: pinmux-twl6030-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sys_nirq1.sys_nirq1 */
+		>;
+	};
+
+	fuel_alert_irq: pinmux-fuel-alert-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x068, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE3)
+			/* gpmc_a20.gpio_44 */
+		>;
+	};
+
+	uart3_pins: pinmux-uart3-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx */
+		>;
+	};
+
+	uart2_pins: pinmux-uart2-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart2_cts.uart2_cts */
+			OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	wlan_host_wake: pinmux-wlan-host-wake-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0bc, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
+			/* cam_shutter.gpio_81 - WLAN_HOST_WAKE */
+		>;
+	};
+
+	bluetooth_pins: pinmux-bluetooth-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+			/* gpmc_ncs6.gpio_103 - BT_EN */
+			OMAP4_IOPAD(0x0be, PIN_OUTPUT | MUX_MODE3)
+			/* cam_strobe.gpio_82 - BT_nRST */
+			OMAP4_IOPAD(0x0c0, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
+			/* cam_globalreset.gpio_83 - BT_HOST_WAKE */
+			OMAP4_IOPAD(0x0d4, PIN_OUTPUT | MUX_MODE3)
+			/* usbb1_ulpitll_dat5.gpio_93 - BT_WAKE */
+		>;
+	};
+
+	touch_pins: pinmux-touch-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x06c, PIN_INPUT | MUX_MODE3)
+			/* gpmc_a22.gpio_46 - TSP_INT */
+		>;
+	};
+
+	vibrator_default: pinmux-vibrator-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x05c, PIN_INPUT_PULLDOWN | MUX_MODE3)
+			/* gpmc_ad14.gpio_38 - MOTOR_EN */
+		>;
+	};
+
+	gp2a_irq: pinmux-gp2a-irq-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x052, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
+			/* gpmc_ad9.gpio_33 - ALS_INT_18 */
+		>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		#clock-cells = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&twl6030_pins
+			&twl6030_wkup_pins
+		>;
+
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+		system-power-controller;
+	};
+};
+
+#include "twl6032.dtsi"
+
+&ldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on;
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on;
+};
+
+&ldo5 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&ldo6 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&smps4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&ldousb {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	accelerometer@18 {
+		compatible = "bosch,bma254";
+		reg = <0x18>;
+		vdd-supply = <&ldo4>;
+		vddio-supply = <&ldo5>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <25 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>,
+			<26 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+		mount-matrix =  "-1",  "0",  "0",
+				"0",  "1",  "0",
+				"0",  "0", "1";
+	};
+
+	magnetometer@2e {
+		compatible = "yamaha,yas530";
+		reg = <0x2e>;
+		vdd-supply = <&ldo4>;
+		iovdd-supply = <&ldo5>;
+		reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+		interrupts = <&gpio6 10 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	light-sensor@44 {
+		compatible = "sharp,gp2ap002a00f";
+		reg = <0x44>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&ldo4>;
+		vio-supply = <&ldo4>;
+		io-channels = <&gp2a_shunt>;
+		io-channel-names = "alsout";
+		sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
+		sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gp2a_irq &prox_irq>;
+	};
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&bridge_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&twl_usb_comparator {
+	usb-supply = <&ldousb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	vmmc-supply = <&reg_espresso_external>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	vmmc-supply = <&reg_espresso_internal>;
+	ti,non-removable;
+	bus-width = <8>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	vmmc-supply = <&reg_espresso_wlan>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc5_pins>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpio3>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_host_wake>;
+	};
+};
+
+&uart2 {
+	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+			&omap4_pmx_core OMAP4_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_pins>;
+		shutdown-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+		device-wakeup-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
-- 
2.43.0

Re: [PATCH v3 06/10] ARM: dts: ti: omap: espresso-common: Add common device tree for Samsung Galaxy Tab 2 series

[Andreas Kemnade]

Am Fri,  8 Nov 2024 20:04:35 +0000
schrieb Mithil Bavishi <bavishimithil@gmail.com>:

> Create common device tree for Samsung Espresso series devices
> 
> Let's create a common tree for all the variants first. Later we can
> device specific trees based on their screen sizes.
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
> ---
>  .../omap/omap4-samsung-espresso-common.dtsi   | 680 ++++++++++++++++++
>  1 file changed, 680 insertions(+)
>  create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
> 
> diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
> new file mode 100644
> index 000000000..62ff3f36c
> --- /dev/null
> +++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
> @@ -0,0 +1,680 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/dts-v1/;
> +#include "dt-bindings/gpio/gpio.h"
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/input/input.h>
> +#include "omap443x.dtsi"
> +
> +/ {
> +	memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x40000000>; /* 1 GB */
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		ramoops_region@A0000000 {

s/_/-/ in node names please.
> +			no-map;
> +			reg = <0xA0000000 0x200000>;

If used for ramoops, then there should be a compatible = "ramoops"
see Documentation/devicetree/bindings/reserved-memory/ramoops.yaml
> +		};
> +
> +		continuous_splash: framebuffer@bef00000{
> +			reg = <0xbef00000 (1024 * 600 * 4)>;
> +			no-map;
> +		};
> +	};
> +
> +	chosen { 
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;

hmm, no bus here, so no need for address/size-cells, rather specify
stdout-path, etc.

> +	};
> +
> +	i2c-gpio-5 {
> +		compatible = "i2c-gpio";
> +		sda-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		scl-gpios = <&gpio4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		i2c-gpio,delay-us = <10>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
hmm, no pinmux here? 
> +	};
> +
> +	i2c-gpio-6 {
> +		compatible = "i2c-gpio";
> +		sda-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		scl-gpios = <&gpio3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		i2c-gpio,delay-us = <10>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;

same here
> +	};
> +
> +	i2c-gpio-7 {
> +		compatible = "i2c-gpio";
> +		sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		i2c-gpio,delay-us = <3>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
same here

> +		fuel-gauge@36 {
> +			compatible = "maxim,max17042";
> +			reg = <0x36>;
> +			pinctrl-0 = <&fuel_alert_irq>;
> +			pinctrl-names = "default";
> +			interrupt-parent = <&gpio2>;
> +			interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
> +			maxim,rsns-microohm = <10000>;
> +			maxim,over-heat-temp = <500>;
> +			maxim,dead-volt = <2500>;
> +			maxim,over-volt = <4300>;
> +		};
> +	};
> +
> +	reg_espresso_wlan: regulator-espresso-wlan {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wlanen_gpio>;
> +		compatible = "regulator-fixed";
> +		regulator-name = "espresso_wlan";
> +		regulator-max-microvolt = <2000000>;
> +		regulator-min-microvolt = <2000000>;
> +		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO_104 */
> +		startup-delay-us = <70000>;
> +		regulator-always-on;
> +		enable-active-high;
> +	};
> +
> +	wlan_pwrseq: wlan-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		clocks = <&twl 0>;
> +		clock-names = "ext_clock";
> +	};
> +
> +	reg_espresso_internal: regulator-espresso-internal {
> +		compatible = "regulator-fixed";
> +		regulator-name = "eMMC_LDO";
> +		regulator-max-microvolt = <1800000>;
> +		regulator-min-microvolt = <1800000>;
> +		gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; /* GPIO_63 */
> +		startup-delay-us = <100000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +		enable-active-high;
> +	};
> +
> +	reg_espresso_external: regulator-espresso-external {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vmmc1";
> +		regulator-max-microvolt = <2800000>;
> +		regulator-min-microvolt = <2800000>;
> +		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; /* GPIO_34 */
> +		regulator-always-on;

hmm, we cannot turn sd card power off?

> +		enable-active-high;
> +	};
> +
> +	reg_touch_ldo_en: regulator-touch-ldo-en  {
> +		compatible = "regulator-fixed";
> +		regulator-name = "touch_ldo_en";
> +		regulator-max-microvolt = <2800000>;
> +		regulator-min-microvolt = <2800000>;
> +		gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* GPIO_54 */
> +		regulator-always-on;
> +		enable-active-high;
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&gpio_keys>;
> +
> +		power {

button or key-power

> +			label = "power";
> +
> +			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; /* GPIO_wk3 */
> +			linux,code = <KEY_POWER>;
> +			wakeup-source;
> +		};
> +
> +		button-volup {
> +			linux,code = <KEY_VOLUMEUP>;
> +			label = "volume_up"; /* GPIO_wk30 */
> +			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		button-voldown {
> +			linux,code = <KEY_VOLUMEDOWN>;
> +			label = "volume_down"; /* GPIO_wk8 */
> +			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +	reg_lcd: regulator-lcd  {
> +		compatible = "regulator-fixed";
> +		regulator-name = "lcd_en";
> +		gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO_135 */
> +		regulator-max-microvolt = <3300000>;
> +		regulator-min-microvolt = <3300000>;
> +		enable-active-high;
> +		regulator-boot-on;
> +	};
> +
> +	pwm10: pwm-10 {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pwm10_default>;
> +		compatible = "ti,omap-dmtimer-pwm";
> +		#pwm-cells = <3>;
> +		ti,timers = <&timer10>;
> +		ti,clock-source = <0x00>;
> +	};
> +
> +	lvds-encoder {
> +		compatible = "doestek,dtc34lm85am", "lvds-encoder";
> +		powerdown-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; /* GPIO_136 */
> +		power-supply = <&reg_lcd>;
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				bridge_in: endpoint {
> +					remote-endpoint = <&dpi_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				bridge_out: endpoint {
> +					remote-endpoint = <&panel_in>;
> +				};
> +			};
> +		};
> +	};
> +
> +	vibrator {
> +		compatible = "gpio-vibrator";
> +		enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; /* GPIO_38 */
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vibrator_default>;
> +	};
> +
> +	gp2a_shunt: current-sense-shunt {
> +		compatible = "current-sense-shunt";
> +		io-channels = <&gpadc 4>;
> +		shunt-resistor-micro-ohms = <24000000>; /* 24 ohms */
> +		#io-channel-cells = <0>;
> +	};
> +
> +	led-ir {
> +		compatible = "gpio-ir-tx";
> +		gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* GPIO_59 */
pinmux?

> +	};
> +};
> +
> +&omap4_pmx_wkup {

order node names alphabetically

> +	twl6030_wkup_pins: pinmux-twl6030-wkup-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x54, PIN_OUTPUT | MUX_MODE3)
> +			/* fref_clk0_out.sys_drm_msecure */
> +		>;
> +	};
> +
This can come from twl6030_omap4.dtsi

> +	gpio_keys: gpio-keys-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x046, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
> +			/* sim_cd.gpio_wk3 - EXT_WAKEUP */
> +			OMAP4_IOPAD(0x056, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
> +			/* fref_clk3_req.gpio_wk30 - VOL_UP */
> +			OMAP4_IOPAD(0x05C, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
> +			/* fref_clk4_out.gpio_wk8 - VOL_DN */
> +		>;
> +	};
> +
> +	prox_irq: prox-irq-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x042, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE3)
> +			/* sim_clk.gpio_wk1 - PS_VOUT */
> +		>;
> +	};
> +};
> +
> +&omap4_pmx_core {

order node names alphabetically

> +	pwm10_default: pinmux-pwm10-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0X0D6, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE1)
> +			/* usbb1_ulpitll_dat6.dmtimer10_pwm_evt - LED_BACKLIGHT_PWM */
> +		>;
> +	};
> +
> +	backlight_pins: pinmux-backlight-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0X0D8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)
> +			/* usbb1_ulpitll_dat7.gpio_95 - LED_BACKLIGHT_RESET */
> +		>;
> +	};
> +
> +	lvds_pins: pinmux-lvds-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0X136, PIN_OUTPUT | MUX_MODE3)
> +			/* mcspi1_simo.gpio_136 - LVDS_nSHDN */
> +		>;
> +	};
> +
> +	i2c1_pins: pinmux-i2c1-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
> +			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
> +		>;
> +	};
> +
> +	i2c2_pins: pinmux-i2c2-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
> +			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
> +		>;
> +	};
> +
> +	i2c3_pins: pinmux-i2c3-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
> +			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
> +		>;
> +	};
> +
> +	i2c4_pins: pinmux-i2c4-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
> +			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
> +		>;
> +	};
> +
> +	mmc2_pins: pinmux-mmc2-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat0 */
> +			OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat1 */
> +			OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat2 */
> +			OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat3 */
> +			OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat4 */
> +			OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat5 */
> +			OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat6 */
> +			OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat7 */
> +			OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_clk */
> +			OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_cmd */
> +		>;
> +	};
> +
> +	mmc1_pins: pinmux-mmc1-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* sdmmc1_clk */
> +			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_cmd */
> +			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_dat0 */
> +			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
> +			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
> +			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
> +		>;
> +	};
> +
> +	mmc5_pins: pinmux-mmc5-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x148, PIN_INPUT_PULLDOWN | MUX_MODE0)
> +			/* sdmmc5_clk.sdmmc5_clk */
> +			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)
> +			/* sdmmc5_cmd.sdmmc5_cmd */
> +			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)
> +			/* sdmmc5_dat0.sdmmc5_dat0 */
> +			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)
> +			/* sdmmc5_dat1.sdmmc5_dat1 */
> +			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)
> +			/* sdmmc5_dat2.sdmmc5_dat2 */
> +			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)
> +			/* sdmmc5_dat3.sdmmc5_dat3 */
> +		>;
> +	};
> +
> +	dss_dpi_pins: pinmux-dss-dpi-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x162, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data23 */
> +			OMAP4_IOPAD(0x164, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data22 */
> +			OMAP4_IOPAD(0x166, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data21 */
> +			OMAP4_IOPAD(0x168, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data20 */
> +			OMAP4_IOPAD(0x16a, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data19 */
> +			OMAP4_IOPAD(0x16c, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data18 */
> +			OMAP4_IOPAD(0x16e, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data15 */
> +			OMAP4_IOPAD(0x170, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data14 */
> +			OMAP4_IOPAD(0x172, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data13 */
> +			OMAP4_IOPAD(0x174, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data12 */
> +			OMAP4_IOPAD(0x176, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data11 */
> +
> +			OMAP4_IOPAD(0x1b4, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data10 */
> +			OMAP4_IOPAD(0x1b6, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data9 */
> +			OMAP4_IOPAD(0x1b8, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data16 */
> +			OMAP4_IOPAD(0x1ba, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data17 */
> +			OMAP4_IOPAD(0x1bc, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_hsync */
> +			OMAP4_IOPAD(0x1be, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_pclk */
> +			OMAP4_IOPAD(0x1c0, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_vsync */
> +			OMAP4_IOPAD(0x1c2, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_de */
> +			OMAP4_IOPAD(0x1c4, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data8 */
> +			OMAP4_IOPAD(0x1c6, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data7 */
> +			OMAP4_IOPAD(0x1c8, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data6 */
> +			OMAP4_IOPAD(0x1ca, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data5 */
> +			OMAP4_IOPAD(0x1cc, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data4 */
> +			OMAP4_IOPAD(0x1ce, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data3 */
> +
> +			OMAP4_IOPAD(0x1d0, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data2 */
> +			OMAP4_IOPAD(0x1d2, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data1 */
> +			OMAP4_IOPAD(0x1d4, PIN_OFF_OUTPUT_LOW | MUX_MODE5)	/* dispc2_data0 */
> +		>;
> +	};
> +
> +	wlanen_gpio: pinmux-wlanen-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)	/* gpmc_ncs7.gpio_104 */
> +		>;
> +	};
> +
> +	twl6030_pins: pinmux-twl6030-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)
> +			/* sys_nirq1.sys_nirq1 */
> +		>;
> +	};

you can simply include twl6030_omap4.dtsi describing recommended
connection between omap4 SoCs and twl603X pmics.

> +
> +	fuel_alert_irq: pinmux-fuel-alert-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x068, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE3)
> +			/* gpmc_a20.gpio_44 */
> +		>;
> +	};
> +
> +	uart3_pins: pinmux-uart3-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx */
> +			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx */
> +		>;
> +	};
> +
> +	uart2_pins: pinmux-uart2-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)
> +			/* uart2_cts.uart2_cts */
> +			OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE0)
> +			/* uart2_rts.uart2_rts */
> +			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)
> +			/* uart2_rx.uart2_rx */
> +			OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE0)
> +			/* uart2_tx.uart2_tx */
> +		>;
> +	};
> +
> +	wlan_host_wake: pinmux-wlan-host-wake-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x0bc, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
> +			/* cam_shutter.gpio_81 - WLAN_HOST_WAKE */

It might be an idea to use a dedicated wakeup irq instead of
explicitely specifying WAKEUP_EN like you did for the uart.
That counts for other occurances of WAKEUP_EN as well.
> +		>;
> +	};
> +
> +	bluetooth_pins: pinmux-bluetooth-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
> +			/* gpmc_ncs6.gpio_103 - BT_EN */
> +			OMAP4_IOPAD(0x0be, PIN_OUTPUT | MUX_MODE3)
> +			/* cam_strobe.gpio_82 - BT_nRST */
> +			OMAP4_IOPAD(0x0c0, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
> +			/* cam_globalreset.gpio_83 - BT_HOST_WAKE */
> +			OMAP4_IOPAD(0x0d4, PIN_OUTPUT | MUX_MODE3)
> +			/* usbb1_ulpitll_dat5.gpio_93 - BT_WAKE */
> +		>;
> +	};
> +
> +	touch_pins: pinmux-touch-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x06c, PIN_INPUT | MUX_MODE3)
> +			/* gpmc_a22.gpio_46 - TSP_INT */
> +		>;
> +	};
> +
> +	vibrator_default: pinmux-vibrator-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x05c, PIN_INPUT_PULLDOWN | MUX_MODE3)
> +			/* gpmc_ad14.gpio_38 - MOTOR_EN */
> +		>;
> +	};
> +
> +	gp2a_irq: pinmux-gp2a-irq-pins {
> +		pinctrl-single,pins = <
> +			OMAP4_IOPAD(0x052, WAKEUP_EN | PIN_INPUT | MUX_MODE3)
> +			/* gpmc_ad9.gpio_33 - ALS_INT_18 */
> +		>;
> +	};
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart3_pins>;
> +
> +	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
> +			       &omap4_pmx_core OMAP4_UART3_RX>;
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1_pins>;
> +
> +	clock-frequency = <400000>;
> +
> +	twl: twl@48 {

generic node names:
pmic@48
yes, there are a lot of bad examples in the tree people (including me!)
keep copying from, but lets not create new bad examples.

> +		reg = <0x48>;
> +		#clock-cells = <1>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <
> +			&twl6030_pins
> +			&twl6030_wkup_pins
> +		>;
> +
> +		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
> +		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
> +		interrupt-parent = <&gic>;
> +		system-power-controller;
> +	};
> +};
> +
> +#include "twl6032.dtsi"
> +
> +&ldo1 {
> +	regulator-min-microvolt = <2800000>;
> +	regulator-max-microvolt = <2800000>;
> +	regulator-always-on;
> +	regulator-state-mem {
> +		regulator-off-in-suspend;
> +	};
> +};
> +
> +&ldo3 {
> +	regulator-min-microvolt = <3300000>;
> +	regulator-max-microvolt = <3300000>;
> +	regulator-always-on;
> +	regulator-state-mem {
> +		regulator-off-in-suspend;
> +	};
> +};
> +
> +&ldo4 {
> +	regulator-min-microvolt = <2800000>;
> +	regulator-max-microvolt = <2800000>;
> +	regulator-always-on;
> +};
> +
> +&ldo5 {
> +	regulator-min-microvolt = <1800000>;
> +	regulator-max-microvolt = <1800000>;
> +	regulator-always-on;
> +};
> +
> +&ldo6 {
> +	regulator-min-microvolt = <1800000>;
> +	regulator-max-microvolt = <1800000>;
> +	regulator-always-on;
> +	regulator-state-mem {
> +		regulator-off-in-suspend;
> +	};
> +};
> +
> +&smps4 {
> +	regulator-min-microvolt = <1800000>;
> +	regulator-max-microvolt = <1800000>;
> +	regulator-always-on;
> +};
> +
> +&ldousb {
> +	regulator-min-microvolt = <3300000>;
> +	regulator-max-microvolt = <3300000>;
> +	regulator-always-on;
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c2_pins>;
> +};
> +
> +&i2c3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c3_pins>;
> +};
> +
> +&i2c4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c4_pins>;
> +
> +	accelerometer@18 {
> +		compatible = "bosch,bma254";
> +		reg = <0x18>;
> +		vdd-supply = <&ldo4>;
> +		vddio-supply = <&ldo5>;
> +		interrupt-parent = <&gpio4>;
> +		interrupts = <25 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>,
> +			<26 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;

this looks odd, binding says IRQ_TYPE_EDGE_RISING. Why do you think you
need both? After something is rising, it is high, so both seem not to
make sense.

> +		mount-matrix =  "-1",  "0",  "0",
> +				"0",  "1",  "0",
> +				"0",  "0", "1";

hmm, checking twice, since I mixed up something earlier. This just
inverts x values, so we are mirroring across y-z plane, that does not
look like a rotation matrix, so it does not describe how it is mounted.
Eg. the n900 has two -1 in there, that is a turn by 180 degree.

Your mount-matrix would be achieved, by cutting the chip into ultra
thin slices, sorting them upside down and glueing that together. I
doubt somebody does that.

Regards,
Andreas

Re: [PATCH v3 06/10] ARM: dts: ti: omap: espresso-common: Add common device tree for Samsung Galaxy Tab 2 series

[Mithil Bavishi]

> > +			no-map;
> > +			reg = <0xA0000000 0x200000>;
>
> If used for ramoops, then there should be a compatible = "ramoops"
> see Documentation/devicetree/bindings/reserved-memory/ramoops.yaml
> > +		};
> > +
> > +		continuous_splash: framebuffer@bef00000{
> > +			reg = <0xbef00000 (1024 * 600 * 4)>;
> > +			no-map;
> > +		};
> > +	};
> > +
> > +	chosen { 
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		ranges;
> 
> hmm, no bus here, so no need for address/size-cells, rather specify
> stdout-path, etc.

Will be dropping rampoops_region, and chosen nodes. They were used
initially for debugging, since we now have drm for display and other
means to get logs, these are not required.

> > +	i2c-gpio-5 {
> > +		compatible = "i2c-gpio";
> > +		sda-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > +		scl-gpios = <&gpio4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > +		i2c-gpio,delay-us = <10>;
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> hmm, no pinmux here? 

Cannot seem to find it in the muxset given in vendor kernel.
These are placeholders for now and hold other devices like smb136 charger,
stmpe811 adc etc. Drivers for which I need to upstream first.

https://github.com/MightyM17/linux_pvr/blob/testing/arch/arm/boot/dts/omap4-samsung-espresso7.dts#L10-L24

So for now is it better to drop them?

> > +	reg_espresso_external: regulator-espresso-external {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "vmmc1";
> > +		regulator-max-microvolt = <2800000>;
> > +		regulator-min-microvolt = <2800000>;
> > +		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; /* GPIO_34 */
> > +		regulator-always-on;
>
> hmm, we cannot turn sd card power off?

A mistake by me, had kept it always on to ensure it works in testing.
Fixed the error in next revision.

> > +		power {
>
> button or key-power

Fixed.

> > +	led-ir {
> > +		compatible = "gpio-ir-tx";
> > +		gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* GPIO_59 */
> pinmux?

Added one according to -
https://github.com/Unlegacy-Android/android_kernel_ti_omap4/blob/3.4/common/arch/arm/mach-omap2/board-espresso-irled.c#L303-L305

> > +&omap4_pmx_wkup {
>
> order node names alphabetically

Fixed.

> > +	twl6030_wkup_pins: pinmux-twl6030-wkup-pins {
> > +		pinctrl-single,pins = <
> > +			OMAP4_IOPAD(0x54, PIN_OUTPUT | MUX_MODE3)
> > +			/* fref_clk0_out.sys_drm_msecure */
> > +		>;
> > +	};
> > +
> This can come from twl6030_omap4.dtsi

Correct, included twl6030_omap4.dtsi and removed this.

> > +&omap4_pmx_core {
>
> order node names alphabetically

Fixed.

> you can simply include twl6030_omap4.dtsi describing recommended
> connection between omap4 SoCs and twl603X pmics.

Fixed.

> It might be an idea to use a dedicated wakeup irq instead of
> explicitely specifying WAKEUP_EN like you did for the uart.
> That counts for other occurances of WAKEUP_EN as well.

Could you point out to some examples having this change?
I have just followed how muxset mentioned it. I assume this can be
worked on later as well.

> generic node names:
> pmic@48

Changed.

> > +	accelerometer@18 {
> > +		compatible = "bosch,bma254";
> > +		reg = <0x18>;
> > +		vdd-supply = <&ldo4>;
> > +		vddio-supply = <&ldo5>;
> > +		interrupt-parent = <&gpio4>;
> > +		interrupts = <25 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>,
> > +			<26 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
> 
> this looks odd, binding says IRQ_TYPE_EDGE_RISING. Why do you think you
> need both? After something is rising, it is high, so both seem not to
> make sense.

https://github.com/torvalds/linux/commit/5640fed3035e88c3ce1361e6fc93f4e72468f307
This was worked on before the above mentioned change, hence the confusion.
bma180 schema wants both the interrupts, I do not know why, but now it has
moved to the bma255 schema which makes more sense.
Fixed it according to new schema.

> +		mount-matrix =  "-1",  "0",  "0",
> +				"0",  "1",  "0",
> +				"0",  "0", "1";

> hmm, checking twice, since I mixed up something earlier. This just
> inverts x values, so we are mirroring across y-z plane, that does not
> look like a rotation matrix, so it does not describe how it is mounted.
> Eg. the n900 has two -1 in there, that is a turn by 180 degree.
> 
> Your mount-matrix would be achieved, by cutting the chip into ultra
> thin slices, sorting them upside down and glueing that together. I
> doubt somebody does that.

Went through the mount matrix docs multiple times. It seems fairly
straightforward for the accelerometer. being just a matrix that we can
multiply to get a desired result.
My intention is to flip the x values thus having a -1 in there.
What I do not understand is the logic of how you came to the conclusion
of "cutting the chip into ultra thin slices, sorting them upside down and
glueing". 
The matrix seems correct and works as intended as well.

Best Regards,
Mithil

Re: [PATCH v3 06/10] ARM: dts: ti: omap: espresso-common: Add common device tree for Samsung Galaxy Tab 2 series

[Andreas Kemnade]

Am Sat, 23 Nov 2024 18:14:05 +0000
schrieb Mithil Bavishi <bavishimithil@gmail.com>:

> > > +			no-map;
> > > +			reg = <0xA0000000 0x200000>;  
> >
> > If used for ramoops, then there should be a compatible = "ramoops"
> > see Documentation/devicetree/bindings/reserved-memory/ramoops.yaml  
> > > +		};
> > > +
> > > +		continuous_splash: framebuffer@bef00000{
> > > +			reg = <0xbef00000 (1024 * 600 * 4)>;
> > > +			no-map;
> > > +		};
> > > +	};
> > > +
> > > +	chosen { 
> > > +		#address-cells = <1>;
> > > +		#size-cells = <1>;
> > > +		ranges;  
> > 
> > hmm, no bus here, so no need for address/size-cells, rather specify
> > stdout-path, etc.  
> 
> Will be dropping rampoops_region, and chosen nodes. They were used
> initially for debugging, since we now have drm for display and other
> means to get logs, these are not required.
> 
you might want to set stdout-path in chosen for earlycon to work.

> > > +	i2c-gpio-5 {
> > > +		compatible = "i2c-gpio";
> > > +		sda-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > > +		scl-gpios = <&gpio4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > > +		i2c-gpio,delay-us = <10>;
> > > +		#address-cells = <1>;
> > > +		#size-cells = <0>;  
> > hmm, no pinmux here?   
> 
> Cannot seem to find it in the muxset given in vendor kernel.

If in doubt, you can get it via busybox devmem from a working system,
look in the reference manual for the gpios, I think they are at:
for sda: 0x4A1000DE 
for scl: 0x4A1000E0
Now you need Mode 3 with input pullup.

> These are placeholders for now and hold other devices like smb136
> charger, stmpe811 adc etc. Drivers for which I need to upstream first.
> 
> https://github.com/MightyM17/linux_pvr/blob/testing/arch/arm/boot/dts/omap4-samsung-espresso7.dts#L10-L24
> 
> So for now is it better to drop them?
> 
keep them and add comments for the devices without driver/binding, so
people can get in touch regarding driver testing, etc.

E.g. like this one:
https://elixir.bootlin.com/linux/v6.12/source/arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts#L138

Regarding missing devices:
btw: you know that the wm1811 is covered by the wm8994 driver?

[...]
> > It might be an idea to use a dedicated wakeup irq instead of
> > explicitely specifying WAKEUP_EN like you did for the uart.
> > That counts for other occurances of WAKEUP_EN as well.  
> 
> Could you point out to some examples having this change?
> I have just followed how muxset mentioned it. I assume this can be
> worked on later as well.
> 
Look around for pmx_core in the devicetrees, you find e.g:
in motorola-mapphone-common.dtsi:

        tmp105@48 {
                compatible = "ti,tmp105";
                reg = <0x48>;
                pinctrl-0 = <&tmp105_irq>;
                pinctrl-names = "default";
                /* kpd_row0.gpio_178 */
                interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
                                       &omap4_pmx_core 0x14e>;
                interrupt-names = "irq", "wakeup";
                wakeup-source;
        };

and of course the uart interrupts in your submission. There is an
offset of 0x40 between things in OMAP4_IOPAD and &omap4_pmx_core 0x...

So you replace some WAKEUP_EN with such a wakeup interrupt and
wakeup-source property. You do not need to do that for stuff in the
wakeup domain (GPIO1). That should work for any i2c device with
interrupts. With that, you can control wakeup from suspend via
/sys/i2c/devices/X-YY/power/wakeup (or maybe power/wakeup of subdevices
thereof.

Regarding Wifi or Bluetooth wakeup, I doubt that WAKEUP_EN has any
effect. If BT or Wifi wakeup is enabled, the gpio is kept active so
power consumption is elevated anyways and nothing sleeps what can be
woken up by WAKEUP_EN unless the driver supports a dedicated wakeup irq.

So I think, replace the WAKEUP_EN for wakeup irqs for i2c stuff and
remove the WAKEUP_EN in wifi/bt if it has no effect there.
 
> > generic node names:
> > pmic@48  
> 
> Changed.
> 
> > > +	accelerometer@18 {
> > > +		compatible = "bosch,bma254";
> > > +		reg = <0x18>;
> > > +		vdd-supply = <&ldo4>;
> > > +		vddio-supply = <&ldo5>;
> > > +		interrupt-parent = <&gpio4>;
> > > +		interrupts = <25 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>,
> > > +			<26 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;  
> > 
> > this looks odd, binding says IRQ_TYPE_EDGE_RISING. Why do you think you
> > need both? After something is rising, it is high, so both seem not to
> > make sense.  
> 
> https://github.com/torvalds/linux/commit/5640fed3035e88c3ce1361e6fc93f4e72468f307
> This was worked on before the above mentioned change, hence the confusion.
> bma180 schema wants both the interrupts, I do not know why, but now it has
> moved to the bma255 schema which makes more sense.
> Fixed it according to new schema.
> 
> > +		mount-matrix =  "-1",  "0",  "0",
> > +				"0",  "1",  "0",
> > +				"0",  "0", "1";  
> 
> > hmm, checking twice, since I mixed up something earlier. This just
> > inverts x values, so we are mirroring across y-z plane, that does not
> > look like a rotation matrix, so it does not describe how it is mounted.
> > Eg. the n900 has two -1 in there, that is a turn by 180 degree.
> > 
> > Your mount-matrix would be achieved, by cutting the chip into ultra
> > thin slices, sorting them upside down and glueing that together. I
> > doubt somebody does that.  
> 
> Went through the mount matrix docs multiple times. It seems fairly
> straightforward for the accelerometer. being just a matrix that we can
> multiply to get a desired result.

In your opinion, you can use the matrix for any kind of conversion of
the values. which can mathematically be done. Which a matrix you can
scale things e.g. too. But there is also the scale parameter. So I
doubt that there are limits what should be done with that matrix.

In my understanding, the matrix is for describing how the chip is
rotated towards the rest of the device not for anything else.
bosch,bma255.yaml clearly says:
 mount-matrix:
    description: an optional 3x3 mounting rotation matrix.

*rotation*

> My intention is to flip the x values thus having a -1 in there.

And I do not have an idea how the chip can be turned in the device to
require that kind of matrix ... 180 degree turns need two flips ...

> What I do not understand is the logic of how you came to the conclusion
> of "cutting the chip into ultra thin slices, sorting them upside down and
> glueing". 
besides of this hypothetical operation.

> The matrix seems correct and works as intended as well.

So maybe the chip is weird and maybe that is the most practical way is
to correct that weidness with the matrix as well and throw away any
dogmatics. Checking..
 
Comparing with n900
Datasheets: I do not find a datasheet for the BMA254, but for some
similar chips:
https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf
https://www.geeetech.com/Documents/BST-BMA180-DS000.pdf

vs.

https://www.st.com/resource/en/datasheet/lis302dl.pdf

No flipping in the axis direction between the them. So either both
n900 and espresso would need single mirroring (=flip one axis) or none.

So if n900 matrix is correct, than you need another -1 in there to have
some 180 degree rotation.

Regards,
Andreas

[PATCH v3 07/10] dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0

[Mithil Bavishi]

Add samsung-espresso7 codename for the 7 inch variant

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 Documentation/devicetree/bindings/arm/ti/omap.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml
index 93e04a109..32978dd9e 100644
--- a/Documentation/devicetree/bindings/arm/ti/omap.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml
@@ -138,6 +138,7 @@ properties:
               - motorola,xyboard-mz617
               - ti,omap4-panda
               - ti,omap4-sdp
+              - samsung,espresso7
           - const: ti,omap4430
           - const: ti,omap4
 
-- 
2.43.0

Re: [PATCH v3 07/10] dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0

[Krzysztof Kozlowski]

On Fri, Nov 08, 2024 at 08:04:36PM +0000, Mithil Bavishi wrote:
> Add samsung-espresso7 codename for the 7 inch variant
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
> ---
>  Documentation/devicetree/bindings/arm/ti/omap.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml
> index 93e04a109..32978dd9e 100644
> --- a/Documentation/devicetree/bindings/arm/ti/omap.yaml
> +++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml
> @@ -138,6 +138,7 @@ properties:
>                - motorola,xyboard-mz617
>                - ti,omap4-panda
>                - ti,omap4-sdp
> +              - samsung,espresso7

Keep alphabetical order

Best regards,
Krzysztof

[PATCH v3 08/10] ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy Tab 2 7.0

[Mithil Bavishi]

Create a device tree for the 7 inch variants (P3100, P3110, P3113)

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 .../dts/ti/omap/omap4-samsung-espresso7.dts   | 70 +++++++++++++++++++
 1 file changed, 70 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts

diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
new file mode 100644
index 000000000..be3d7a82f
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include "omap4-samsung-espresso-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 2 (7 inch)";
+	compatible = "samsung,espresso7", "ti,omap4430", "ti,omap4";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm10 0 1200 0>;
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <2>;
+	};
+
+	panel {
+		compatible = "samsung,ltn070nl01", "panel-lvds";
+		power-supply = <&reg_lcd>;
+		width-mm = <154>;
+		height-mm = <90>;
+		data-mapping = "vesa-24";
+		backlight = <&backlight>;
+
+		panel-timing {
+			clock-frequency = <47255554>;
+
+			hback-porch = <210>;
+			hactive = <1024>;
+			hfront-porch = <186>;
+			hsync-len = <50>;
+
+			vback-porch = <11>;
+			vactive = <600>;
+			vfront-porch = <24>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+			syncclk-active = <0>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touchscreen@48 {
+		compatible = "melfas,mms136";
+		reg = <0x48>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1023>;
+		touchscreen-size-y = <599>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+		avdd-supply = <&reg_touch_ldo_en>;
+		vdd-supply = <&ldo6>;
+	};
+};
-- 
2.43.0

Re: [PATCH v3 08/10] ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy Tab 2 7.0

[Andreas Kemnade]

Hi Mithil,

Am Fri,  8 Nov 2024 20:04:37 +0000
schrieb Mithil Bavishi <bavishimithil@gmail.com>:

> Create a device tree for the 7 inch variants (P3100, P3110, P3113)
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
> ---
>  .../dts/ti/omap/omap4-samsung-espresso7.dts   | 70 +++++++++++++++++++
>  1 file changed, 70 insertions(+)
>  create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
> 
> diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
> new file mode 100644
> index 000000000..be3d7a82f
> --- /dev/null
> +++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
> @@ -0,0 +1,70 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/dts-v1/;
> +
> +#include "omap4-samsung-espresso-common.dtsi"
> +
> +/ {
> +	model = "Samsung Galaxy Tab 2 (7 inch)";
> +	compatible = "samsung,espresso7", "ti,omap4430", "ti,omap4";
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&backlight_pins>;
> +		pwms = <&pwm10 0 1200 0>;
> +		power-supply = <&reg_lcd>;
> +		enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <2>;
> +	};
> +
> +	panel {
> +		compatible = "samsung,ltn070nl01", "panel-lvds";
> +		power-supply = <&reg_lcd>;
> +		width-mm = <154>;
> +		height-mm = <90>;
> +		data-mapping = "vesa-24";
> +		backlight = <&backlight>;
> +
> +		panel-timing {
> +			clock-frequency = <47255554>;
> +
> +			hback-porch = <210>;
> +			hactive = <1024>;
> +			hfront-porch = <186>;
> +			hsync-len = <50>;
> +
> +			vback-porch = <11>;
> +			vactive = <600>;
> +			vfront-porch = <24>;
> +			vsync-len = <10>;
> +
> +			hsync-active = <0>;
> +			vsync-active = <0>;
> +			de-active = <1>;
> +			pixelclk-active = <1>;
> +			syncclk-active = <0>;
> +		};
> +
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&bridge_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&i2c3 {
> +	touchscreen@48 {
> +		compatible = "melfas,mms136";
> +		reg = <0x48>;
> +		interrupt-parent = <&gpio2>;
> +		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
> +		touchscreen-size-x = <1023>;

Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml:
horizontal resolution of touchscreen (maximum x coordinate reported + 1)

So this touchscreen reports max 1022?

> +		touchscreen-size-y = <599>;

same question.

Regards,
Andreas

Re: Re: [PATCH v3 08/10] ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy Tab 2 7.0

[Mithil Bavishi]

> > +&i2c3 {
> > +	touchscreen@48 {
> > +		compatible = "melfas,mms136";
> > +		reg = <0x48>;
> > +		interrupt-parent = <&gpio2>;
> > +		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
> > +		touchscreen-size-x = <1023>;
>
> Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml:
> horizontal resolution of touchscreen (maximum x coordinate reported + 1)
>
> So this touchscreen reports max 1022?
>
> > +		touchscreen-size-y = <599>;
>
> same question.

My apologies, it should be 1023+1 (1024) and 599+1(600) respectively.
Will fix it in the next revision.

https://github.com/Unlegacy-Android/android_kernel_ti_omap4/blob/3.4/common/arch/arm/mach-omap2/board-espresso-input.c#L145

Best Regards,
Mithil

[PATCH v3 09/10] dt-bindings: omap: Add Samsung Galaxy Tab 2 10.1

[Mithil Bavishi]

Add samsung-espresso10 codename for the 10 inch variant

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 Documentation/devicetree/bindings/arm/ti/omap.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml
index 32978dd9e..4ddea1a20 100644
--- a/Documentation/devicetree/bindings/arm/ti/omap.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml
@@ -139,6 +139,7 @@ properties:
               - ti,omap4-panda
               - ti,omap4-sdp
               - samsung,espresso7
+              - samsung,espresso10
           - const: ti,omap4430
           - const: ti,omap4
 
-- 
2.43.0

Re: [PATCH v3 09/10] dt-bindings: omap: Add Samsung Galaxy Tab 2 10.1

[Krzysztof Kozlowski]

On 08/11/2024 21:04, Mithil Bavishi wrote:
> Add samsung-espresso10 codename for the 10 inch variant
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
> ---
>  Documentation/devicetree/bindings/arm/ti/omap.yaml | 1 +

Squash it. Really, these are just one liners for similar devices.

Best regards,
Krzysztof

[PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1

[Mithil Bavishi]

Create a device tree for the 10 inch variants (P5100, P5110, P5113)

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 .../dts/ti/omap/omap4-samsung-espresso10.dts  | 102 ++++++++++++++++++
 1 file changed, 102 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts

diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
new file mode 100644
index 000000000..70bbef468
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include "omap4-samsung-espresso-common.dtsi"
+#include <dt-bindings/power/summit,smb347-charger.h>
+/ {
+	model = "Samsung Galaxy Tab 2 (10 inch)";
+	compatible = "samsung,espresso10", "ti,omap4430", "ti,omap4";
+
+	i2c-gpio-5 {
+		smb347: charger@6 {
+			compatible = "summit,smb347";
+			reg = <0x6>; // 0x0C >> 1
+			interrupt-parent = <&gpio2>;
+			interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
+
+			summit,enable-usb-charging;
+			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+			summit,chip-temperature-threshold-celsius = <120>;
+			summit,usb-current-limit-microamp = <1800000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm10 0 1600 0>;
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	panel {
+		compatible = "samsung,ltn101al03", "panel-lvds";
+		power-supply = <&reg_lcd>;
+		width-mm = <223>;
+		height-mm = <125>;
+		data-mapping = "vesa-24";
+		backlight = <&backlight>;
+
+		panel-timing {
+			clock-frequency = <69818000>;
+
+			hback-porch = <64>;
+			hactive = <1280>;
+			hfront-porch = <16>;
+			hsync-len = <48>;
+
+			vback-porch = <11>;
+			vactive = <800>;
+			vfront-porch = <16>;
+			vsync-len = <3>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touchscreen: synaptics-rmi4-i2c@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+
+		avdd-supply = <&reg_touch_ldo_en>;
+		vdd-supply = <&ldo6>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		touchscreen-size-x = <1279>;
+		touchscreen-size-y = <799>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
-- 
2.43.0

Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1

[Andreas Kemnade]

Am Fri,  8 Nov 2024 20:04:39 +0000
schrieb Mithil Bavishi <bavishimithil@gmail.com>:

> Create a device tree for the 10 inch variants (P5100, P5110, P5113)
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
> ---
>  .../dts/ti/omap/omap4-samsung-espresso10.dts  | 102 ++++++++++++++++++
>  1 file changed, 102 insertions(+)
>  create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
> 
> diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
> new file mode 100644
> index 000000000..70bbef468
> --- /dev/null
> +++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
> @@ -0,0 +1,102 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/dts-v1/;
> +
> +#include "omap4-samsung-espresso-common.dtsi"
> +#include <dt-bindings/power/summit,smb347-charger.h>
> +/ {
> +	model = "Samsung Galaxy Tab 2 (10 inch)";
> +	compatible = "samsung,espresso10", "ti,omap4430", "ti,omap4";
> +
> +	i2c-gpio-5 {
> +		smb347: charger@6 {
> +			compatible = "summit,smb347";
> +			reg = <0x6>; // 0x0C >> 1
> +			interrupt-parent = <&gpio2>;
> +			interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
> +
> +			summit,enable-usb-charging;
> +			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
> +			summit,chip-temperature-threshold-celsius = <120>;
> +			summit,usb-current-limit-microamp = <1800000>;
> +		};
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&backlight_pins>;
> +		pwms = <&pwm10 0 1600 0>;
> +		power-supply = <&reg_lcd>;
> +		enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <7>;
> +	};
> +
> +	panel {
> +		compatible = "samsung,ltn101al03", "panel-lvds";
> +		power-supply = <&reg_lcd>;
> +		width-mm = <223>;
> +		height-mm = <125>;
> +		data-mapping = "vesa-24";
> +		backlight = <&backlight>;
> +
> +		panel-timing {
> +			clock-frequency = <69818000>;
> +
> +			hback-porch = <64>;
> +			hactive = <1280>;
> +			hfront-porch = <16>;
> +			hsync-len = <48>;
> +
> +			vback-porch = <11>;
> +			vactive = <800>;
> +			vfront-porch = <16>;
> +			vsync-len = <3>;
> +
> +			hsync-active = <0>;
> +			vsync-active = <0>;
> +			de-active = <1>;
> +			pixelclk-active = <1>;
> +		};
> +
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&bridge_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&i2c3 {
> +	touchscreen: synaptics-rmi4-i2c@20 {

touchscreen@20

> +		compatible = "syna,rmi4-i2c";
> +		reg = <0x20>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		interrupt-parent = <&gpio2>;
> +		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&touch_pins>;
> +
> +		avdd-supply = <&reg_touch_ldo_en>;
not known in schema

> +		vdd-supply = <&ldo6>;
> +
> +		syna,reset-delay-ms = <200>;
> +		syna,startup-delay-ms = <200>;
> +
> +		touchscreen-size-x = <1279>;

Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml:
horizontal resolution of touchscreen (maximum x coordinate reported + 1)

So this touchscreen reports max 1278?

> +		touchscreen-size-y = <799>;

same question.

And these things belong below rm4-f11 according to
Documentation/devicetree/bindings/input/syna,rmi4.yaml

Regards,
Andreas

Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1

[Mithil Bavishi]

> > +&i2c3 {
> > +	touchscreen: synaptics-rmi4-i2c@20 {
>
> touchscreen@20
Fixed, generic node names right!

> > +		avdd-supply = <&reg_touch_ldo_en>;
> not known in schema
I cannot seem to find the "vio-supply" shown in the bindings. There is
only mention of avdd-supply and vdd-supply. I am not sure if avdd and
vio are equivalent, hence the confusion.
What should be the solution here?

> Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml:
> horizontal resolution of touchscreen (maximum x coordinate reported + 1)

> So this touchscreen reports max 1278?

Fixed it as well, 1280 and 800 respectively.
https://github.com/Unlegacy-Android/android_kernel_ti_omap4/blob/3.4/common/arch/arm/mach-omap2/board-espresso-input.c#L264

> And these things belong below rm4-f11 according to
> Documentation/devicetree/bindings/input/syna,rmi4.yaml

I did not quite understand what you mean by this. I checked the bindings 
and a few examples, there is nothing "below" rmi4-f11.

Best Regards,
Mithil

Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1

[Andreas Kemnade]

Am Sat, 23 Nov 2024 17:52:58 +0000
schrieb Mithil Bavishi <bavishimithil@gmail.com>:

> > > +&i2c3 {
> > > +	touchscreen: synaptics-rmi4-i2c@20 {  
> >
> > touchscreen@20  
> Fixed, generic node names right!
> 
> > > +		avdd-supply = <&reg_touch_ldo_en>;  
> > not known in schema  
> I cannot seem to find the "vio-supply" shown in the bindings. There is
> only mention of avdd-supply and vdd-supply. I am not sure if avdd and
> vio are equivalent, hence the confusion.
> What should be the solution here?
> 
well, look at the schematics and see how it is wired ;-) 
Without schematic, it is a bit tricky. So you can look how it is used.
vdd-supply sounds like something to make the chip fully functional.
vio-supply seems to be for the io lines.  As the vendor kernel seem to
set i2c to gpio mode, so probably because the vio-supply is powered
down according to the board file you posted.
So it might be vio-supply only or vio and vdd-supply combined.
In any case document what you have seen in the vendor kernel.

> > Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml:
> > horizontal resolution of touchscreen (maximum x coordinate reported + 1)  
> 
> > So this touchscreen reports max 1278?  
> 
> Fixed it as well, 1280 and 800 respectively.
> https://github.com/Unlegacy-Android/android_kernel_ti_omap4/blob/3.4/common/arch/arm/mach-omap2/board-espresso-input.c#L264
> 
> > And these things belong below rm4-f11 according to
> > Documentation/devicetree/bindings/input/syna,rmi4.yaml  
> 
> I did not quite understand what you mean by this. I checked the bindings 
> and a few examples, there is nothing "below" rmi4-f11.
> 
this part of the binding description
patternProperties:
  "^rmi4-f1[12]@1[12]$":
    type: object
    unevaluatedProperties: false
    $ref: /schemas/input/touchscreen/touchscreen.yaml#
    description:

basically says that standard touchscreen properties are accepted below
rmi4-f11. 

In the example you have:
           rmi4-f11@11 {
                reg = <0x11>;
                touchscreen-inverted-y;
                syna,sensor-type = <2>;
            };

Regards,
Andreas

Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1

[Mithil Bavishi]

> well, look at the schematics and see how it is wired ;-)

Schematic mentions vddtx, vdda, vdd and vbus, so unsure about that.
VDDTX is the one with 2.8V, VDD and VBUS are at 1.8V and VDDA is grounded,
it just gets the input from GDNA from the same touch sensor.

> As the vendor kernel seem to
> set i2c to gpio mode, so probably because the vio-supply is powered
> down according to the board file you posted.
> So it might be vio-supply only or vio and vdd-supply combined.
> In any case document what you have seen in the vendor kernel.

https://github.com/Unlegacy-Android/android_kernel_ti_omap4/blob/3.4/common/arch/arm/mach-omap2/board-espresso-input.c
This just makes it more confusing. Very confused on what is what now xD.
reg_touch_ldo_en is 2.8V which goes to VDDTX, it is gpmc_nwp.gpio_54 - TSP_LDO_ON
ldo6 is 1.8V presumably ldo6 (VAP_IO_1.8V) which goes to VDD, VBUS.

> basically says that standard touchscreen properties are accepted below
> rmi4-f11. 

But we do not use any of those properties. If you're talking about the
touchscreen-size-x/y, even in the examples those are out of rmi4-f11, in
the parent node.

Best Regards,
Mithil

Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1

[Andreas Kemnade]

Am Sat, 23 Nov 2024 19:26:33 +0000
schrieb Mithil Bavishi <bavishimithil@gmail.com>:

> > well, look at the schematics and see how it is wired ;-)  
> 
> Schematic mentions vddtx, vdda, vdd and vbus, so unsure about that.
> VDDTX is the one with 2.8V, VDD and VBUS are at 1.8V and VDDA is grounded,
> it just gets the input from GDNA from the same touch sensor.
> 
> > As the vendor kernel seem to
> > set i2c to gpio mode, so probably because the vio-supply is powered
> > down according to the board file you posted.
> > So it might be vio-supply only or vio and vdd-supply combined.
> > In any case document what you have seen in the vendor kernel.  
> 
> https://github.com/Unlegacy-Android/android_kernel_ti_omap4/blob/3.4/common/arch/arm/mach-omap2/board-espresso-input.c
> This just makes it more confusing. Very confused on what is what now xD.
> reg_touch_ldo_en is 2.8V which goes to VDDTX, it is gpmc_nwp.gpio_54 - TSP_LDO_ON
> ldo6 is 1.8V presumably ldo6 (VAP_IO_1.8V) which goes to VDD, VBUS.
> 
well, I think I2C bus runs at 1.8V, and there is IO_1.8V in the name,
so vio-supply should be something at 1.8V, so probably ldo6 is
vio-supply. Maybe add a remark in the comments. But then it might be
not a good idea to turn that off in suspend. if the other regulator is
kept on.

> > basically says that standard touchscreen properties are accepted below
> > rmi4-f11.   
> 
> But we do not use any of those properties. If you're talking about the
> touchscreen-size-x/y, even in the examples those are out of rmi4-f11, in
> the parent node.
>
Where do you see those examples? Here touchscreen-invert-y is below
rmi4-f11.
https://elixir.bootlin.com/linux/v6.12/source/Documentation/devicetree/bindings/input/syna,rmi4.yaml#L269

We have also the warning from dtbs_check:
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb:
synaptics-rmi4-i2c@20: Unevaluated properties are not allowed
('avdd-supply', 'touchscreen-size-x', 'touchscreen-size-y' were
unexpected)

Regards,
Andreas

Re: [PATCH v3 10/10] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1

[Mithil Bavishi]

> well, I think I2C bus runs at 1.8V, and there is IO_1.8V in the name,
> so vio-supply should be something at 1.8V, so probably ldo6 is
> vio-supply. Maybe add a remark in the comments. But then it might be
> not a good idea to turn that off in suspend. if the other regulator is
> kept on.

But we are not sure if it is the same, also I personally cannot test it
since I own the 7 inch version. Let's remove avdd supply for now and see
if someone with 10 inch version can test it again later. This is better
than putting potentially incorrect information.

> We have also the warning from dtbs_check:
> arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb:
> synaptics-rmi4-i2c@20: Unevaluated properties are not allowed
> ('avdd-supply', 'touchscreen-size-x', 'touchscreen-size-y' were
> unexpected)

Ah, indeed. I missed it, will fix it as you've mentioned.

Best Regards,
Mithil

Re: [PATCH v3 00/10] Initial support for Samsung Galaxy Tab 2 series

[Rob Herring (Arm)]

On Fri, 08 Nov 2024 20:04:29 +0000, Mithil Bavishi wrote:
> This series adds initial support for the Samsung Galaxy Tab 2
> (samsung-espresso7/10) series of devices. It adds support for 6 variants
> (P3100, P3110, P3113, P5100, P5110, P5113). Downstream categorised them
> based on 3G and WiFi, but since they use different panel, touch
> controllers, batteries, I decided to categorise them based on screen
> size as espresso7 and espresso10.
> 
> It adds basic functionality for both the models including panel, drm,
> sdcard, touchscreen, mmc, wifi, bluetooth, keys, battery, fuel gauge,
> pmic, sensors.
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
> ---
> Changes in v3
> - Use device tree from the correct branch
> - Fix commit subjects to matching the subsystem
> - Add Doestek vendor
> - Add compatible for LVDS encoder
> - Add compatibles for 7 and 10 inch panels
> - Clean up device tree using "make CHECK_DTBS=y"
> - Link to v2: https://lore.kernel.org/all/20241030211215.347710-1-bavishimithil@gmail.com/
> Changes in v2
> - Fix node names in common dtsi to have - instead of _
> - Removed import for twl6030.dtsi
> - Edited dts to completely use twl6032 nodes
> - Fixed typo ldosb -> ldousb
> - Link to v1: https://lore.kernel.org/all/20241030194136.297648-1-bavishimithil@gmail.com/
> 
> --
> Mithil Bavishi (10):
>   ARM: dts: twl6032: Add DTS file for TWL6032 PMIC
>   dt-bindings: vendor-prefixes: Add Doestek
>   dt-bindings: display: bridge: lvds-codec: add doestek,dtc34lm85am
>   dt-bindings: display: panel-lvds: Add compatible for Samsung
>     LTN070NL01 Panel
>   dt-bindings: display: panel-lvds: Add compatible for Samsung
>     LTN101AL03 Panel
>   ARM: dts: ti: omap: espresso-common: Add common device tree for
>     Samsung Galaxy Tab 2 series
>   dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0
>   ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy
>     Tab 2 7.0
>   dt-bindings: omap: Add Samsung Galaxy Tab 2 10.1
>   ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy
>     Tab 2 10.1
> 
>  .../devicetree/bindings/arm/ti/omap.yaml      |   2 +
>  .../bindings/display/bridge/lvds-codec.yaml   |   1 +
>  .../bindings/display/panel/panel-lvds.yaml    |   4 +
>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>  .../omap/omap4-samsung-espresso-common.dtsi   | 680 ++++++++++++++++++
>  .../dts/ti/omap/omap4-samsung-espresso10.dts  | 102 +++
>  .../dts/ti/omap/omap4-samsung-espresso7.dts   |  70 ++
>  arch/arm/boot/dts/ti/omap/twl6032.dtsi        |  77 ++
>  8 files changed, 938 insertions(+)
>  create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
>  create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
>  create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
>  create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi
> 
> --
> 2.43.0
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y ti/omap/omap4-samsung-espresso10.dtb ti/omap/omap4-samsung-espresso7.dtb' for 20241108200440.7562-1-bavishimithil@gmail.com:

arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: sram@40304000: '#address-cells' is a required property
	from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: sram@40304000: '#size-cells' is a required property
	from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: sram@40304000: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /interrupt-controller@48281000: failed to match any schema with compatible: ['ti,omap4-wugen-mpu']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: ocp: $nodename:0: 'ocp' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/l3-noc@44000000: failed to match any schema with compatible: ['ti,omap4-l3-noc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: interconnect@4a300000: $nodename:0: 'interconnect@4a300000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000: failed to match any schema with compatible: ['ti,omap4-l4-wkup', 'simple-pm-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@0: $nodename:0: 'segment@0' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@0: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@4000/counter@0: failed to match any schema with compatible: ['ti,omap-counter32k']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: prm@0: $nodename:0: 'prm@0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: prm@0: clockdomains: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: prm@0: clocks: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0: failed to match any schema with compatible: ['ti,omap4-prm', 'simple-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/sys_clkin_ck@110: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/abe_dpll_bypass_clk_mux_ck@108: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/abe_dpll_refclk_mux_ck@10c: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/l4_wkup_clk_mux_ck@108: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/syc_clk_div_ck@100: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/usim_ck@1858: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/usim_fclk@1858: failed to match any schema with compatible: ['ti,gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/trace_clk_div_ck: failed to match any schema with compatible: ['ti,clkdm-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/bandgap_fclk@1888: failed to match any schema with compatible: ['ti,gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: emu_sys_clkdm: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clockdomains/emu_sys_clkdm: failed to match any schema with compatible: ['ti,clockdomain']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: l4_wkup_cm@1800: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/l4_wkup_cm@1800: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/l4_wkup_cm@1800/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: emu_sys_cm@1a00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/emu_sys_cm@1a00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/emu_sys_cm@1a00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@300: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@300: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@400: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@400: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@500: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@500: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@600: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@600: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@700: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@700: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@f00: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@f00: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1000: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1000: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1100: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1100: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1200: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1200: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1300: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1300: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1400: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1400: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1600: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1600: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1700: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1700: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1900: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1900: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1b00: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1b00: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0: failed to match any schema with compatible: ['ti,omap4-scrm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk0_src_gate_ck@310: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk0_src_mux_ck@310: failed to match any schema with compatible: ['ti,composite-mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk0_src_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk0_ck@310: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk1_src_gate_ck@314: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk1_src_mux_ck@314: failed to match any schema with compatible: ['ti,composite-mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk1_src_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk1_ck@314: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk2_src_gate_ck@318: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk2_src_mux_ck@318: failed to match any schema with compatible: ['ti,composite-mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk2_src_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk2_ck@318: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk3_src_gate_ck@31c: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk3_src_mux_ck@31c: failed to match any schema with compatible: ['ti,composite-mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk3_src_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk3_ck@31c: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk4_src_gate_ck@320: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk4_src_mux_ck@320: failed to match any schema with compatible: ['ti,composite-mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk4_src_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk4_ck@320: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk5_src_gate_ck@324: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk5_src_mux_ck@324: failed to match any schema with compatible: ['ti,composite-mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk5_src_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk5_ck@324: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclkreq0_ck@210: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclkreq1_ck@214: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclkreq2_ck@218: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclkreq3_ck@21c: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclkreq4_ck@220: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclkreq5_ck@224: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@0/target-module@c000/scm@c000: failed to match any schema with compatible: ['ti,omap4-scm-wkup']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@10000: $nodename:0: 'segment@10000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@10000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@10000/target-module@4000/wdt@0: failed to match any schema with compatible: ['ti,omap4-wdt', 'ti,omap3-wdt']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@10000/target-module@4000/wdt@0: failed to match any schema with compatible: ['ti,omap4-wdt', 'ti,omap3-wdt']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a300000/segment@10000/target-module@c000/keypad@0: failed to match any schema with compatible: ['ti,omap4-keypad']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: sram@40304000: '#address-cells' is a required property
	from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: sram@40304000: '#size-cells' is a required property
	from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: sram@40304000: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/sram/sram.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@20000: $nodename:0: 'segment@20000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@20000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: interconnect@4a000000: $nodename:0: 'interconnect@4a000000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000: failed to match any schema with compatible: ['ti,omap4-l4-cfg', 'simple-pm-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@0: $nodename:0: 'segment@0' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@0: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: scm@0: $nodename:0: 'scm@0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /interrupt-controller@48281000: failed to match any schema with compatible: ['ti,omap4-wugen-mpu']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@2000/scm@0: failed to match any schema with compatible: ['ti,omap4-scm-core', 'simple-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: ocp: $nodename:0: 'ocp' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: scm_conf@0: compatible: ['syscon'] is too short
	from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@2000/scm@0/control-phy@300: failed to match any schema with compatible: ['ti,control-phy-usb2']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@2000/scm@0/control-phy@33c: failed to match any schema with compatible: ['ti,control-phy-otghs']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: cm1@0: $nodename:0: 'cm1@0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: cm1@0: clockdomains: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: cm1@0: clocks: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0: failed to match any schema with compatible: ['ti,omap4-cm1', 'simple-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/l3-noc@44000000: failed to match any schema with compatible: ['ti,omap4-l3-noc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: interconnect@4a300000: $nodename:0: 'interconnect@4a300000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/pad_clks_ck@108: failed to match any schema with compatible: ['ti,gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000: failed to match any schema with compatible: ['ti,omap4-l4-wkup', 'simple-pm-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@0: $nodename:0: 'segment@0' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@0: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/slimbus_clk@108: failed to match any schema with compatible: ['ti,gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@4000/counter@0: failed to match any schema with compatible: ['ti,omap-counter32k']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: prm@0: $nodename:0: 'prm@0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_abe_ck@1e0: failed to match any schema with compatible: ['ti,omap4-dpll-m4xen-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: prm@0: clocks: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: prm@0: clockdomains: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_abe_x2_ck@1f0: failed to match any schema with compatible: ['ti,omap4-dpll-x2-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_abe_m2x2_ck@1f0: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/abe_clk@108: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0: failed to match any schema with compatible: ['ti,omap4-prm', 'simple-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_abe_m3x2_ck@1f4: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/core_hsd_byp_clk_mux_ck@12c: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_ck@120: failed to match any schema with compatible: ['ti,omap4-dpll-core-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_x2_ck: failed to match any schema with compatible: ['ti,omap4-dpll-x2-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m6x2_ck@140: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m2_ck@130: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/sys_clkin_ck@110: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m5x2_ck@13c: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/div_core_ck@100: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/abe_dpll_bypass_clk_mux_ck@108: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/div_iva_hs_clk@1dc: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/div_mpu_hs_clk@19c: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/abe_dpll_refclk_mux_ck@10c: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m4x2_ck@138: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_abe_m2_ck@1f0: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m3x2_gate_ck@134: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m3x2_div_ck@134: failed to match any schema with compatible: ['ti,composite-divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/l4_wkup_clk_mux_ck@108: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m3x2_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m7x2_ck@144: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/iva_hsd_byp_clk_mux_ck@1ac: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/syc_clk_div_ck@100: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_iva_ck@1a0: failed to match any schema with compatible: ['ti,omap4-dpll-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_iva_x2_ck: failed to match any schema with compatible: ['ti,omap4-dpll-x2-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/usim_ck@1858: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_iva_m4x2_ck@1b8: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_iva_m5x2_ck@1bc: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_mpu_ck@160: failed to match any schema with compatible: ['ti,omap4-dpll-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/usim_fclk@1858: failed to match any schema with compatible: ['ti,gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_mpu_m2_ck@170: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/trace_clk_div_ck: failed to match any schema with compatible: ['ti,clkdm-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/l3_div_ck@100: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/l4_div_ck@100: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clocks/bandgap_fclk@1888: failed to match any schema with compatible: ['ti,gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/ocp_abe_iclk@528: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: emu_sys_clkdm: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/clockdomains/emu_sys_clkdm: failed to match any schema with compatible: ['ti,clockdomain']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: mpuss_cm@300: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/mpuss_cm@300: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/mpuss_cm@300/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: tesla_cm@400: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: l4_wkup_cm@1800: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/tesla_cm@400: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/l4_wkup_cm@1800: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/tesla_cm@400/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: abe_cm@500: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/abe_cm@500: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/abe_cm@500/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/l4_wkup_cm@1800/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: cm2@0: $nodename:0: 'cm2@0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: cm2@0: clockdomains: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: cm2@0: clocks: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: emu_sys_cm@1a00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0: failed to match any schema with compatible: ['ti,omap4-cm2', 'simple-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/emu_sys_cm@1a00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/per_hsd_byp_clk_mux_ck@14c: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/emu_sys_cm@1a00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_ck@140: failed to match any schema with compatible: ['ti,omap4-dpll-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m2_ck@150: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_x2_ck@150: failed to match any schema with compatible: ['ti,omap4-dpll-x2-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@300: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@300: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m2x2_ck@150: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m3x2_gate_ck@154: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m3x2_div_ck@154: failed to match any schema with compatible: ['ti,composite-divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@400: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@400: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m3x2_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m4x2_ck@158: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m5x2_ck@15c: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@500: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@500: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m6x2_ck@160: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m7x2_ck@164: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_usb_ck@180: failed to match any schema with compatible: ['ti,omap4-dpll-j-type-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@600: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@600: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_usb_clkdcoldo_ck@1b4: failed to match any schema with compatible: ['ti,fixed-factor-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_usb_m2_ck@190: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/ducati_clk_mux_ck@100: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@700: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@700: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/func_48m_fclk@108: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@f00: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@f00: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/func_64m_fclk@108: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/func_96m_fclk@108: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/init_60m_fclk@104: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1000: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/per_abe_nc_fclk@108: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1000: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/usb_phy_cm_clk32k@640: failed to match any schema with compatible: ['ti,gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: l3_init_clkdm: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clockdomains/l3_init_clkdm: failed to match any schema with compatible: ['ti,clockdomain']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1100: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: l4_ao_cm@600: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l4_ao_cm@600: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1100: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l4_ao_cm@600/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: l3_1_cm@700: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_1_cm@700: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1200: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_1_cm@700/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1200: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: l3_2_cm@800: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_2_cm@800: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_2_cm@800/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: ducati_cm@900: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1300: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/ducati_cm@900: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1300: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/ducati_cm@900/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: l3_dma_cm@a00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_dma_cm@a00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_dma_cm@a00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1400: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1400: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: l3_emif_cm@b00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_emif_cm@b00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_emif_cm@b00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1600: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: d2d_cm@c00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/d2d_cm@c00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1600: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/d2d_cm@c00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: l4_cfg_cm@d00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1700: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l4_cfg_cm@d00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1700: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l4_cfg_cm@d00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: l3_instr_cm@e00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_instr_cm@e00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_instr_cm@e00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1900: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: ivahd_cm@f00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1900: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/ivahd_cm@f00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/ivahd_cm@f00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: iss_cm@1000: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/iss_cm@1000: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1b00: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/iss_cm@1000/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@6000/prm@0/prm@1b00: failed to match any schema with compatible: ['ti,omap4-prm-inst', 'ti,omap-prm-inst']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: l3_dss_cm@1100: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_dss_cm@1100: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_dss_cm@1100/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: l3_gfx_cm@1200: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_gfx_cm@1200: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_gfx_cm@1200/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: l3_init_cm@1300: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_init_cm@1300: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0: failed to match any schema with compatible: ['ti,omap4-scrm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_init_cm@1300/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: clock@1400: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clock@1400: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clock@1400/clock@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clock@1400/clock@1a0: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@56000/dma-controller@0: failed to match any schema with compatible: ['ti,omap4430-sdma', 'ti,omap-sdma']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@56000/dma-controller@0: failed to match any schema with compatible: ['ti,omap4430-sdma', 'ti,omap-sdma']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk0_src_gate_ck@310: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@58000/hsi@0: failed to match any schema with compatible: ['ti,omap4-hsi']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@58000/hsi@0/hsi-port@2000: failed to match any schema with compatible: ['ti,omap4-hsi-port']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@58000/hsi@0/hsi-port@3000: failed to match any schema with compatible: ['ti,omap4-hsi-port']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk0_src_mux_ck@310: failed to match any schema with compatible: ['ti,composite-mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@62000/usbhstll@0: failed to match any schema with compatible: ['ti,usbhs-tll']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@64000/usbhshost@0: failed to match any schema with compatible: ['ti,usbhs-host']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: ohci@800: $nodename:0: 'ohci@800' does not match '^usb(@.*)?'
	from schema $id: http://devicetree.org/schemas/usb/generic-ohci.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: ehci@c00: $nodename:0: 'ehci@c00' does not match '^usb(@.*)?'
	from schema $id: http://devicetree.org/schemas/usb/generic-ehci.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@0/target-module@66000/mmu@0: failed to match any schema with compatible: ['ti,omap4-iommu']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@80000: $nodename:0: 'segment@80000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@80000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: usb_otg_hs@0: interface-type: b'\x00\x00\x00\x01' is not of type 'object', 'integer', 'array', 'boolean', 'null'
	from schema $id: http://devicetree.org/schemas/dt-core.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@80000/target-module@2b000/usb_otg_hs@0: failed to match any schema with compatible: ['ti,omap4-musb']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@80000/target-module@2d000/ocp2scp@0: failed to match any schema with compatible: ['ti,omap-ocp2scp']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk0_src_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@80000/target-module@59000/smartreflex@0: failed to match any schema with compatible: ['ti,omap4-smartreflex-mpu']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk0_ck@310: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@80000/target-module@5b000/smartreflex@0: failed to match any schema with compatible: ['ti,omap4-smartreflex-iva']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@80000/target-module@5d000/smartreflex@0: failed to match any schema with compatible: ['ti,omap4-smartreflex-core']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk1_src_gate_ck@314: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk1_src_mux_ck@314: failed to match any schema with compatible: ['ti,composite-mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@100000: $nodename:0: 'segment@100000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@100000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk1_src_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk1_ck@314: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk2_src_gate_ck@318: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk2_src_mux_ck@318: failed to match any schema with compatible: ['ti,composite-mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk2_src_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: omap4_padconf_global@5a0: $nodename:0: 'omap4_padconf_global@5a0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@100000/target-module@0/omap4_padconf_global@5a0/pbias_regulator@60: failed to match any schema with compatible: ['ti,pbias-omap4', 'ti,pbias-omap']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@4a000000/segment@100000/target-module@0/omap4_padconf_global@5a0/pbias_regulator@60: failed to match any schema with compatible: ['ti,pbias-omap4', 'ti,pbias-omap']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk2_ck@318: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk3_src_gate_ck@31c: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@180000: $nodename:0: 'segment@180000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@180000: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@180000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@200000: $nodename:0: 'segment@200000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@200000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk3_src_mux_ck@31c: failed to match any schema with compatible: ['ti,composite-mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk3_src_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk3_ck@31c: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk4_src_gate_ck@320: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@280000: $nodename:0: 'segment@280000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@280000: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@280000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@300000: $nodename:0: 'segment@300000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@300000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk4_src_mux_ck@320: failed to match any schema with compatible: ['ti,composite-mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: interconnect@48000000: $nodename:0: 'interconnect@48000000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@48000000: failed to match any schema with compatible: ['ti,omap4-l4-per', 'simple-pm-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@0: $nodename:0: 'segment@0' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@0: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk4_src_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: serial@0: {'compatible': ['ti,omap4-uart'], 'reg': [[0, 256]], 'interrupts': [[0, 74, 4]], 'clock-frequency': 48000000, 'pinctrl-names': ['default'], 'pinctrl-0': [[109]], 'interrupts-extended': [[1, 0, 74, 4], [110, 260]], '$nodename': ['serial@0']} is valid under each of {'required': ['interrupts-extended']}, {'required': ['interrupts']}
	from schema $id: http://devicetree.org/schemas/serial/8250_omap.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk4_ck@320: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk5_src_gate_ck@324: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk5_src_mux_ck@324: failed to match any schema with compatible: ['ti,composite-mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk5_src_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclk5_ck@324: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclkreq0_ck@210: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclkreq1_ck@214: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclkreq2_ck@218: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclkreq3_ck@21c: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: serial@0: {'compatible': ['ti,omap4-uart'], 'reg': [[0, 256]], 'interrupts': [[0, 73, 4]], 'clock-frequency': 48000000, 'interrupts-extended': [[1, 0, 73, 4], [110, 220]], 'pinctrl-names': ['default'], 'pinctrl-0': [[116]], 'bluetooth': {'compatible': ['brcm,bcm4330-bt'], 'pinctrl-names': ['default'], 'pinctrl-0': [[117]], 'shutdown-gpios': [[118, 7, 0]], 'reset-gpios': [[119, 18, 1]], 'device-wakeup-gpios': [[119, 29, 0]], 'interrupt-parent': [[119]], 'interrupts': [[19, 2]]}, '$nodename': ['serial@0']} is valid under each of {'required': ['interrupts-extended']}, {'required': ['interrupts']}
	from schema $id: http://devicetree.org/schemas/serial/8250_omap.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclkreq4_ck@220: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@a000/scrm@0/clocks/auxclkreq5_ck@224: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: twl@48: Unevaluated properties are not allowed ('pwm', 'pwmled', 'usb-comparator' were unexpected)
	from schema $id: http://devicetree.org/schemas/mfd/ti,twl.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@0/target-module@c000/scm@c000: failed to match any schema with compatible: ['ti,omap4-scm-wkup']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@10000: $nodename:0: 'segment@10000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@10000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/twl@48/usb-comparator: failed to match any schema with compatible: ['ti,twl6030-usb']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/twl@48/pwm: failed to match any schema with compatible: ['ti,twl6030-pwm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/twl@48/pwmled: failed to match any schema with compatible: ['ti,twl6030-pwmled']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@10000/target-module@4000/wdt@0: failed to match any schema with compatible: ['ti,omap4-wdt', 'ti,omap3-wdt']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@10000/target-module@4000/wdt@0: failed to match any schema with compatible: ['ti,omap4-wdt', 'ti,omap3-wdt']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@48000000/segment@0/target-module@96000/mcbsp@0: failed to match any schema with compatible: ['ti,omap4-mcbsp']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a300000/segment@10000/target-module@c000/keypad@0: failed to match any schema with compatible: ['ti,omap4-keypad']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0: failed to match any schema with compatible: ['ti,omap4-hsmmc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@48000000/segment@0/target-module@a5000/des@0: failed to match any schema with compatible: ['ti,omap4-des']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@48000000/segment@0/target-module@ad000/mmc@0: failed to match any schema with compatible: ['ti,omap4-hsmmc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@48000000/segment@0/target-module@b2000/1w@0: failed to match any schema with compatible: ['ti,omap3-1w']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@20000: $nodename:0: 'segment@20000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@20000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0: failed to match any schema with compatible: ['ti,omap4-hsmmc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@48000000/segment@0/target-module@d1000/mmc@0: failed to match any schema with compatible: ['ti,omap4-hsmmc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@48000000/segment@0/target-module@d5000/mmc@0: failed to match any schema with compatible: ['ti,omap4-hsmmc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: interconnect@4a000000: $nodename:0: 'interconnect@4a000000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@200000: $nodename:0: 'segment@200000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@200000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000: failed to match any schema with compatible: ['ti,omap4-l4-cfg', 'simple-pm-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@0: $nodename:0: 'segment@0' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@0: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@48210000/mpu: failed to match any schema with compatible: ['ti,omap4-mpu']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: interconnect@40100000: $nodename:0: 'interconnect@40100000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@40100000: failed to match any schema with compatible: ['ti,omap4-l4-abe', 'simple-pm-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@0: $nodename:0: 'segment@0' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: segment@0: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: scm@0: $nodename:0: 'scm@0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@40100000/segment@0/target-module@22000/mcbsp@0: failed to match any schema with compatible: ['ti,omap4-mcbsp']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@2000/scm@0: failed to match any schema with compatible: ['ti,omap4-scm-core', 'simple-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: scm_conf@0: compatible: ['syscon'] is too short
	from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@40100000/segment@0/target-module@24000/mcbsp@0: failed to match any schema with compatible: ['ti,omap4-mcbsp']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@40100000/segment@0/target-module@26000/mcbsp@0: failed to match any schema with compatible: ['ti,omap4-mcbsp']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@2000/scm@0/control-phy@300: failed to match any schema with compatible: ['ti,control-phy-usb2']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@40100000/segment@0/target-module@2e000/dmic@0: failed to match any schema with compatible: ['ti,omap4-dmic']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@2000/scm@0/control-phy@33c: failed to match any schema with compatible: ['ti,control-phy-otghs']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@40100000/segment@0/target-module@30000/wdt@0: failed to match any schema with compatible: ['ti,omap4-wdt', 'ti,omap3-wdt']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/interconnect@40100000/segment@0/target-module@30000/wdt@0: failed to match any schema with compatible: ['ti,omap4-wdt', 'ti,omap3-wdt']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: cm1@0: $nodename:0: 'cm1@0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: cm1@0: clocks: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: cm1@0: clockdomains: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0: failed to match any schema with compatible: ['ti,omap4-cm1', 'simple-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/pad_clks_ck@108: failed to match any schema with compatible: ['ti,gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@55082000/mmu@0: failed to match any schema with compatible: ['ti,omap4-iommu']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@4e000000/dmm@0: failed to match any schema with compatible: ['ti,omap4-dmm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: emif@0: '#phy-cells' is a dependency of 'phy-type'
	from schema $id: http://devicetree.org/schemas/phy/phy-provider.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@4c000000/emif@0: failed to match any schema with compatible: ['ti,emif-4d']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: emif@0: '#phy-cells' is a dependency of 'phy-type'
	from schema $id: http://devicetree.org/schemas/phy/phy-provider.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@4d000000/emif@0: failed to match any schema with compatible: ['ti,emif-4d']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/slimbus_clk@108: failed to match any schema with compatible: ['ti,gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@4b501000/aes@0: failed to match any schema with compatible: ['ti,omap4-aes']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@4b701000/aes@0: failed to match any schema with compatible: ['ti,omap4-aes']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: sham@0: 'ti,hwmods' is a required property
	from schema $id: http://devicetree.org/schemas/crypto/ti,omap-sham.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/regulator-abb-mpu: failed to match any schema with compatible: ['ti,abb-v2']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/regulator-abb-iva: failed to match any schema with compatible: ['ti,abb-v2']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@58000000/dss@0: failed to match any schema with compatible: ['ti,omap4-dss']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@58000000/dss@0/target-module@1000/dispc@0: failed to match any schema with compatible: ['ti,omap4-dispc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@58000000/dss@0/target-module@3000/encoder@0: failed to match any schema with compatible: ['ti,omap4-venc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@58000000/dss@0/target-module@4000/encoder@0: failed to match any schema with compatible: ['ti,omap4-dsi']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@58000000/dss@0/target-module@5000/encoder@0: failed to match any schema with compatible: ['ti,omap4-dsi']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@58000000/dss@0/target-module@6000/encoder@0: failed to match any schema with compatible: ['ti,omap4-hdmi']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/target-module@5a000000/iva: failed to match any schema with compatible: ['ti,ivahd']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_abe_ck@1e0: failed to match any schema with compatible: ['ti,omap4-dpll-m4xen-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: /ocp/bandgap@4a002260: failed to match any schema with compatible: ['ti,omap4430-bandgap']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: thermal-zones: 'cpu_thermal' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-]{1,10}-thermal$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_abe_x2_ck@1f0: failed to match any schema with compatible: ['ti,omap4-dpll-x2-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_abe_m2x2_ck@1f0: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/abe_clk@108: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dtb: gpio-keys: 'power' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_abe_m3x2_ck@1f4: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/core_hsd_byp_clk_mux_ck@12c: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_ck@120: failed to match any schema with compatible: ['ti,omap4-dpll-core-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_x2_ck: failed to match any schema with compatible: ['ti,omap4-dpll-x2-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m6x2_ck@140: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m2_ck@130: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m5x2_ck@13c: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/div_core_ck@100: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/div_iva_hs_clk@1dc: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/div_mpu_hs_clk@19c: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m4x2_ck@138: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_abe_m2_ck@1f0: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m3x2_gate_ck@134: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m3x2_div_ck@134: failed to match any schema with compatible: ['ti,composite-divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m3x2_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_core_m7x2_ck@144: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/iva_hsd_byp_clk_mux_ck@1ac: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_iva_ck@1a0: failed to match any schema with compatible: ['ti,omap4-dpll-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_iva_x2_ck: failed to match any schema with compatible: ['ti,omap4-dpll-x2-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_iva_m4x2_ck@1b8: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_iva_m5x2_ck@1bc: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_mpu_ck@160: failed to match any schema with compatible: ['ti,omap4-dpll-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/dpll_mpu_m2_ck@170: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/l3_div_ck@100: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/l4_div_ck@100: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/clocks/ocp_abe_iclk@528: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: mpuss_cm@300: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/mpuss_cm@300: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/mpuss_cm@300/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: tesla_cm@400: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/tesla_cm@400: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/tesla_cm@400/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: abe_cm@500: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/abe_cm@500: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@4000/cm1@0/abe_cm@500/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: cm2@0: $nodename:0: 'cm2@0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: cm2@0: clocks: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: cm2@0: clockdomains: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0: failed to match any schema with compatible: ['ti,omap4-cm2', 'simple-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/per_hsd_byp_clk_mux_ck@14c: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_ck@140: failed to match any schema with compatible: ['ti,omap4-dpll-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m2_ck@150: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_x2_ck@150: failed to match any schema with compatible: ['ti,omap4-dpll-x2-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m2x2_ck@150: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m3x2_gate_ck@154: failed to match any schema with compatible: ['ti,composite-no-wait-gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m3x2_div_ck@154: failed to match any schema with compatible: ['ti,composite-divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m3x2_ck: failed to match any schema with compatible: ['ti,composite-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m4x2_ck@158: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m5x2_ck@15c: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m6x2_ck@160: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_per_m7x2_ck@164: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_usb_ck@180: failed to match any schema with compatible: ['ti,omap4-dpll-j-type-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_usb_clkdcoldo_ck@1b4: failed to match any schema with compatible: ['ti,fixed-factor-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/dpll_usb_m2_ck@190: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/ducati_clk_mux_ck@100: failed to match any schema with compatible: ['ti,mux-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/func_48m_fclk@108: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/func_64m_fclk@108: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/func_96m_fclk@108: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/init_60m_fclk@104: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/per_abe_nc_fclk@108: failed to match any schema with compatible: ['ti,divider-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clocks/usb_phy_cm_clk32k@640: failed to match any schema with compatible: ['ti,gate-clock']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: l3_init_clkdm: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clockdomains/l3_init_clkdm: failed to match any schema with compatible: ['ti,clockdomain']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: l4_ao_cm@600: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l4_ao_cm@600: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l4_ao_cm@600/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: l3_1_cm@700: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_1_cm@700: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_1_cm@700/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: l3_2_cm@800: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_2_cm@800: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_2_cm@800/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: ducati_cm@900: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/ducati_cm@900: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/ducati_cm@900/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: l3_dma_cm@a00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_dma_cm@a00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_dma_cm@a00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: l3_emif_cm@b00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_emif_cm@b00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_emif_cm@b00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: d2d_cm@c00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/d2d_cm@c00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/d2d_cm@c00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: l4_cfg_cm@d00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l4_cfg_cm@d00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l4_cfg_cm@d00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: l3_instr_cm@e00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_instr_cm@e00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_instr_cm@e00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: ivahd_cm@f00: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/ivahd_cm@f00: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/ivahd_cm@f00/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: iss_cm@1000: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/iss_cm@1000: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/iss_cm@1000/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: l3_dss_cm@1100: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_dss_cm@1100: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_dss_cm@1100/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: l3_gfx_cm@1200: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_gfx_cm@1200: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_gfx_cm@1200/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: l3_init_cm@1300: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_init_cm@1300: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/l3_init_cm@1300/clk@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: clock@1400: '#clock-cells' is a dependency of 'clock-output-names'
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clock@1400: failed to match any schema with compatible: ['ti,omap4-cm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clock@1400/clock@20: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@8000/cm2@0/clock@1400/clock@1a0: failed to match any schema with compatible: ['ti,clkctrl']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@56000/dma-controller@0: failed to match any schema with compatible: ['ti,omap4430-sdma', 'ti,omap-sdma']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@56000/dma-controller@0: failed to match any schema with compatible: ['ti,omap4430-sdma', 'ti,omap-sdma']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@58000/hsi@0: failed to match any schema with compatible: ['ti,omap4-hsi']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@58000/hsi@0/hsi-port@2000: failed to match any schema with compatible: ['ti,omap4-hsi-port']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@58000/hsi@0/hsi-port@3000: failed to match any schema with compatible: ['ti,omap4-hsi-port']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@62000/usbhstll@0: failed to match any schema with compatible: ['ti,usbhs-tll']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@64000/usbhshost@0: failed to match any schema with compatible: ['ti,usbhs-host']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: ohci@800: $nodename:0: 'ohci@800' does not match '^usb(@.*)?'
	from schema $id: http://devicetree.org/schemas/usb/generic-ohci.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: ehci@c00: $nodename:0: 'ehci@c00' does not match '^usb(@.*)?'
	from schema $id: http://devicetree.org/schemas/usb/generic-ehci.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@0/target-module@66000/mmu@0: failed to match any schema with compatible: ['ti,omap4-iommu']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@80000: $nodename:0: 'segment@80000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@80000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: usb_otg_hs@0: interface-type: b'\x00\x00\x00\x01' is not of type 'object', 'integer', 'array', 'boolean', 'null'
	from schema $id: http://devicetree.org/schemas/dt-core.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@80000/target-module@2b000/usb_otg_hs@0: failed to match any schema with compatible: ['ti,omap4-musb']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@80000/target-module@2d000/ocp2scp@0: failed to match any schema with compatible: ['ti,omap-ocp2scp']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@80000/target-module@59000/smartreflex@0: failed to match any schema with compatible: ['ti,omap4-smartreflex-mpu']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@80000/target-module@5b000/smartreflex@0: failed to match any schema with compatible: ['ti,omap4-smartreflex-iva']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@80000/target-module@5d000/smartreflex@0: failed to match any schema with compatible: ['ti,omap4-smartreflex-core']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@100000: $nodename:0: 'segment@100000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@100000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: omap4_padconf_global@5a0: $nodename:0: 'omap4_padconf_global@5a0' does not match '^([a-z][a-z0-9\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@100000/target-module@0/omap4_padconf_global@5a0/pbias_regulator@60: failed to match any schema with compatible: ['ti,pbias-omap4', 'ti,pbias-omap']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@4a000000/segment@100000/target-module@0/omap4_padconf_global@5a0/pbias_regulator@60: failed to match any schema with compatible: ['ti,pbias-omap4', 'ti,pbias-omap']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@180000: $nodename:0: 'segment@180000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@180000: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@180000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@200000: $nodename:0: 'segment@200000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@200000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@280000: $nodename:0: 'segment@280000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@280000: 'ranges' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@280000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@300000: $nodename:0: 'segment@300000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@300000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: interconnect@48000000: $nodename:0: 'interconnect@48000000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@48000000: failed to match any schema with compatible: ['ti,omap4-l4-per', 'simple-pm-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@0: $nodename:0: 'segment@0' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@0: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: serial@0: {'compatible': ['ti,omap4-uart'], 'reg': [[0, 256]], 'interrupts': [[0, 74, 4]], 'clock-frequency': 48000000, 'pinctrl-names': ['default'], 'pinctrl-0': [[109]], 'interrupts-extended': [[1, 0, 74, 4], [110, 260]], '$nodename': ['serial@0']} is valid under each of {'required': ['interrupts-extended']}, {'required': ['interrupts']}
	from schema $id: http://devicetree.org/schemas/serial/8250_omap.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: synaptics-rmi4-i2c@20: Unevaluated properties are not allowed ('avdd-supply', 'touchscreen-size-x', 'touchscreen-size-y' were unexpected)
	from schema $id: http://devicetree.org/schemas/input/syna,rmi4.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: serial@0: {'compatible': ['ti,omap4-uart'], 'reg': [[0, 256]], 'interrupts': [[0, 73, 4]], 'clock-frequency': 48000000, 'interrupts-extended': [[1, 0, 73, 4], [110, 220]], 'pinctrl-names': ['default'], 'pinctrl-0': [[116]], 'bluetooth': {'compatible': ['brcm,bcm4330-bt'], 'pinctrl-names': ['default'], 'pinctrl-0': [[117]], 'shutdown-gpios': [[118, 7, 0]], 'reset-gpios': [[119, 18, 1]], 'device-wakeup-gpios': [[119, 29, 0]], 'interrupt-parent': [[119]], 'interrupts': [[19, 2]]}, '$nodename': ['serial@0']} is valid under each of {'required': ['interrupts-extended']}, {'required': ['interrupts']}
	from schema $id: http://devicetree.org/schemas/serial/8250_omap.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: twl@48: Unevaluated properties are not allowed ('pwm', 'pwmled', 'usb-comparator' were unexpected)
	from schema $id: http://devicetree.org/schemas/mfd/ti,twl.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/twl@48/usb-comparator: failed to match any schema with compatible: ['ti,twl6030-usb']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/twl@48/pwm: failed to match any schema with compatible: ['ti,twl6030-pwm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@48000000/segment@0/target-module@70000/i2c@0/twl@48/pwmled: failed to match any schema with compatible: ['ti,twl6030-pwmled']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@48000000/segment@0/target-module@96000/mcbsp@0: failed to match any schema with compatible: ['ti,omap4-mcbsp']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@48000000/segment@0/target-module@9c000/mmc@0: failed to match any schema with compatible: ['ti,omap4-hsmmc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@48000000/segment@0/target-module@a5000/des@0: failed to match any schema with compatible: ['ti,omap4-des']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@48000000/segment@0/target-module@ad000/mmc@0: failed to match any schema with compatible: ['ti,omap4-hsmmc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@48000000/segment@0/target-module@b2000/1w@0: failed to match any schema with compatible: ['ti,omap3-1w']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@48000000/segment@0/target-module@b4000/mmc@0: failed to match any schema with compatible: ['ti,omap4-hsmmc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@48000000/segment@0/target-module@d1000/mmc@0: failed to match any schema with compatible: ['ti,omap4-hsmmc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@48000000/segment@0/target-module@d5000/mmc@0: failed to match any schema with compatible: ['ti,omap4-hsmmc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@200000: $nodename:0: 'segment@200000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@200000: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@48210000/mpu: failed to match any schema with compatible: ['ti,omap4-mpu']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: interconnect@40100000: $nodename:0: 'interconnect@40100000' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@40100000: failed to match any schema with compatible: ['ti,omap4-l4-abe', 'simple-pm-bus']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@0: $nodename:0: 'segment@0' does not match '^bus(@[0-9a-f]+)?$'
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: segment@0: 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'power-domains' is a required property
	from schema $id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@40100000/segment@0/target-module@22000/mcbsp@0: failed to match any schema with compatible: ['ti,omap4-mcbsp']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@40100000/segment@0/target-module@24000/mcbsp@0: failed to match any schema with compatible: ['ti,omap4-mcbsp']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@40100000/segment@0/target-module@26000/mcbsp@0: failed to match any schema with compatible: ['ti,omap4-mcbsp']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@40100000/segment@0/target-module@2e000/dmic@0: failed to match any schema with compatible: ['ti,omap4-dmic']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@40100000/segment@0/target-module@30000/wdt@0: failed to match any schema with compatible: ['ti,omap4-wdt', 'ti,omap3-wdt']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/interconnect@40100000/segment@0/target-module@30000/wdt@0: failed to match any schema with compatible: ['ti,omap4-wdt', 'ti,omap3-wdt']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@55082000/mmu@0: failed to match any schema with compatible: ['ti,omap4-iommu']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@4e000000/dmm@0: failed to match any schema with compatible: ['ti,omap4-dmm']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: emif@0: '#phy-cells' is a dependency of 'phy-type'
	from schema $id: http://devicetree.org/schemas/phy/phy-provider.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@4c000000/emif@0: failed to match any schema with compatible: ['ti,emif-4d']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: emif@0: '#phy-cells' is a dependency of 'phy-type'
	from schema $id: http://devicetree.org/schemas/phy/phy-provider.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@4d000000/emif@0: failed to match any schema with compatible: ['ti,emif-4d']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@4b501000/aes@0: failed to match any schema with compatible: ['ti,omap4-aes']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@4b701000/aes@0: failed to match any schema with compatible: ['ti,omap4-aes']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: sham@0: 'ti,hwmods' is a required property
	from schema $id: http://devicetree.org/schemas/crypto/ti,omap-sham.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/regulator-abb-mpu: failed to match any schema with compatible: ['ti,abb-v2']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/regulator-abb-iva: failed to match any schema with compatible: ['ti,abb-v2']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@58000000/dss@0: failed to match any schema with compatible: ['ti,omap4-dss']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@58000000/dss@0/target-module@1000/dispc@0: failed to match any schema with compatible: ['ti,omap4-dispc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@58000000/dss@0/target-module@3000/encoder@0: failed to match any schema with compatible: ['ti,omap4-venc']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@58000000/dss@0/target-module@4000/encoder@0: failed to match any schema with compatible: ['ti,omap4-dsi']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@58000000/dss@0/target-module@5000/encoder@0: failed to match any schema with compatible: ['ti,omap4-dsi']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@58000000/dss@0/target-module@6000/encoder@0: failed to match any schema with compatible: ['ti,omap4-hdmi']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/target-module@5a000000/iva: failed to match any schema with compatible: ['ti,ivahd']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: /ocp/bandgap@4a002260: failed to match any schema with compatible: ['ti,omap4430-bandgap']
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: thermal-zones: 'cpu_thermal' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-]{1,10}-thermal$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dtb: gpio-keys: 'power' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#